linux-kernel - Re: 3.10.9: EXT4-fs (sdb1): delayed block allocation failed for inode 163315715 at logical offset 1 with max blocks 2 with error -5

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 30 Aug 2013 11:18:55 -0400
From:	Theodore Ts'o <tytso@....edu>
To:	Martin MOKREJŠ <mmokrejs@...il.com>
Cc:	linux-ext4@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	"Rafael J. Wysocki" <rjw@...k.pl>
Subject: Re: 3.10.9: EXT4-fs (sdb1): delayed block allocation failed for
 inode 163315715 at logical offset 1 with max blocks 2 with error -5

Your SATA disk had enough errors that the ATA link was completely
reset, and the device was detached and then reattached.  As far as
kernel is concerned, it's a new device.

The problem is that the ext4 mount was for the old device, not the
newly attached device.  So attempts to read from the device is
returning errors from the block device layer.

> but later on, suddenly, without any other related message in between as far as I can see:
> 
> Aug 28 11:47:39 vostro kernel: [25874.121506] EXT4-fs error (device sdb1): __ext4_get_inode_loc:4039: inode #163315715: block 653262880: comm memcheck-amd64-: unable to read itable block
> Aug 28 11:47:39 vostro kernel: [25874.121510] EXT4-fs error (device sdb1) in ext4_reserve_inode_write:4973: IO failure

This was just the first timat the system had tried accessing the file
system, and when it tried reading from the device, it got an I/O
failure from the device pretty much immediately.  

> So kernel was trying for 10 minutes before it gave up?

I'm guessing your file system is configured with errors=continued?

> Any clues what I should look at? Few days ago memtest86+ went fine through all 16GB of RAM (Dell Vostro 3550). I do not know if the PCI/ACPI change is related or not. 

The error is happening at the block device layer.  So I don't know
whether it's caused by the table getting bumped, or something getting
confused when the device tried to enter some kind of power saving
mode, etc.

					- Ted
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/