[ 0.000000] Linux version 3.10.9-default-pciehp (root@vostro) (gcc version 4.6.3 (Gentoo 4.6.3 p1.8, pie-0.5.2) ) #8 SMP Tue Aug 27 01:37:03 MEST 2013 [ 0.000000] Command line: root=/dev/sda5 slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da4e5000-0x00000000da527fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da528000-0x00000000da792fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da793000-0x00000000da966fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000daa88fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daa89000-0x00000000dad67fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Vostro 3550/, BIOS A11 08/03/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdaa89 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0280f000, 0x0280ffff] PGTABLE [ 0.000000] BRK [0x02810000, 0x02810fff] PGTABLE [ 0.000000] BRK [0x02811000, 0x02811fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff] [ 0.000000] [mem 0x41fc00000-0x41fdfffff] page 4k [ 0.000000] BRK [0x02812000, 0x02812fff] PGTABLE [ 0.000000] BRK [0x02813000, 0x02813fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fbfffff] [ 0.000000] [mem 0x41c000000-0x41fbfffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x40200000-0xda4e4fff] [ 0.000000] [mem 0x40200000-0xda4e4fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xda528000-0xda792fff] [ 0.000000] [mem 0xda528000-0xda792fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xda967000-0xdaa88fff] [ 0.000000] [mem 0xda967000-0xdaa88fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 4k [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL) [ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000daff1d38 000F4 (v04 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000dafe8180 09BB6 (v02 DELL WN09 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dafe3f80 00040 [ 0.000000] ACPI: APIC 00000000daff1e30 00072 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000daff1ea8 0003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000daff1ee8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112) [ 0.000000] ACPI: SLIC 00000000daff2398 00176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 00000000daff2510 00038 (v01 DELL WN09 01072009 AMI. 00000004) [ 0.000000] ACPI: SSDT 00000000daff2548 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000daff2d90 00996 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 00000000daff3728 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: OSFR 00000000daff3810 00086 (v01 DELL M08 07DC0803 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040d600000-ffff88041d5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xda4e4fff] [ 0.000000] node 0: [mem 0xda528000-0xda792fff] [ 0.000000] node 0: [mem 0xda967000-0xdaa88fff] [ 0.000000] node 0: [mem 0x100000000-0x41fdfffff] [ 0.000000] On node 0 totalpages: 4170254 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13906 pages used for memmap [ 0.000000] DMA32 zone: 889970 pages, LIFO batch:31 [ 0.000000] Normal zone: 51192 pages used for memmap [ 0.000000] Normal zone: 3276288 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000 [ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000 [ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000 [ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000 [ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000 [ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000 [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88041d800000 s77760 r8192 d20544 u524288 [ 0.000000] pcpu-alloc: s77760 r8192 d20544 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4104936 [ 0.000000] Kernel command line: root=/dev/sda5 slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16269368k/17299456k available (7799k kernel code, 618440k absent, 411648k reserved, 5103k data, 908k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.010000] tsc: Detected 2793.651 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.30 BogoMIPS (lpj=27936510) [ 0.000151] pid_max: default: 32768 minimum: 301 [ 0.000762] Mount-cache hash table entries: 256 [ 0.002393] CPU: Physical Processor ID: 0 [ 0.002467] CPU: Processor Core ID: 0 [ 0.002542] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002657] mce: CPU supports 7 MCE banks [ 0.002742] CPU0: Thermal monitoring enabled (TM1) [ 0.002827] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.003098] Freeing SMP alternatives: 28k freed [ 0.003177] ACPI: Core revision 20130328 [ 0.103929] ACPI: All ACPI Tables successfully acquired [ 0.243444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.343650] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07) [ 0.343879] TSC deadline timer enabled [ 0.343893] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.344158] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.344272] ... version: 3 [ 0.344345] ... bit width: 48 [ 0.344418] ... generic registers: 4 [ 0.344491] ... value mask: 0000ffffffffffff [ 0.344565] ... max period: 000000007fffffff [ 0.344639] ... fixed-purpose events: 3 [ 0.344711] ... event mask: 000000070000000f [ 0.344840] kmemcheck: Limiting number of CPUs to 1. [ 0.344915] kmemcheck: Initialized [ 0.345949] Brought up 1 CPUs [ 0.346023] smpboot: Total of 1 processors activated (5587.30 BogoMIPS) [ 0.347522] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.348486] devtmpfs: initialized [ 0.350368] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes) [ 0.350710] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes) [ 0.353878] xor: measuring software checksum speed [ 0.454099] 8regs : 12306.000 MB/sec [ 0.554234] 8regs_prefetch: 11418.400 MB/sec [ 0.654369] 32regs : 12198.800 MB/sec [ 0.754504] 32regs_prefetch: 11398.000 MB/sec [ 0.754577] xor: using function: 8regs (12306.000 MB/sec) [ 0.755212] NET: Registered protocol family 16 [ 0.757991] ACPI: bus type PCI registered [ 0.758750] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.758860] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.775256] PCI: Using configuration type 1 for base access [ 0.832938] bio: create slab at 0 [ 0.994866] raid6: sse2x1 7473 MB/s [ 1.165097] raid6: sse2x2 9341 MB/s [ 1.335329] raid6: sse2x4 10819 MB/s [ 1.335330] raid6: using algorithm sse2x4 (10819 MB/s) [ 1.335331] raid6: using ssse3x2 recovery algorithm [ 1.335697] ACPI: Added _OSI(Module Device) [ 1.335779] ACPI: Added _OSI(Processor Device) [ 1.335858] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.335946] ACPI: Added _OSI(Processor Aggregator Device) [ 1.341053] ACPI: EC: Look up EC in DSDT [ 1.352277] ACPI: Executed 1 blocks of module-level executable AML code [ 1.432974] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.455691] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.458523] ACPI: Dynamic OEM Table Load: [ 1.458526] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.463730] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.468048] ACPI: Dynamic OEM Table Load: [ 1.468050] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.469171] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.471474] ACPI: Dynamic OEM Table Load: [ 1.471476] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.484910] ACPI: Interpreter enabled [ 1.485033] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 1.485152] ACPI: (supports S0 S1 S3 S4 S5) [ 1.485226] ACPI: Using IOAPIC for interrupt routing [ 1.485789] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.785838] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.803446] PCI host bridge to bus 0000:00 [ 1.803529] pci_bus 0000:00: root bus resource [bus 00-3e] [ 1.803611] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.803691] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.803774] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.803857] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 1.803940] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 1.804023] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 1.804106] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 1.804188] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 1.804272] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 1.804354] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 1.804436] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 1.804521] pci_bus 0000:00: scanning bus [ 1.804557] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 1.804565] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 [ 1.806323] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 1.806338] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit] [ 1.806347] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.806353] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 1.808026] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 1.808064] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit] [ 1.808191] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.808215] pci 0000:00:16.0: PME# disabled [ 1.809967] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 1.810003] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff] [ 1.810159] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.810165] pci 0000:00:1a.0: PME# disabled [ 1.827128] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1.827744] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 1.827775] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit] [ 1.827916] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.827922] pci 0000:00:1b.0: PME# disabled [ 1.829046] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 1.829605] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 1.829677] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.829761] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.829767] pci 0000:00:1c.0: PME# disabled [ 1.830342] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.830890] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 1.830959] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.831042] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.831048] pci 0000:00:1c.1: PME# disabled [ 1.831660] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 1.832208] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 1.832278] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.832361] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.832366] pci 0000:00:1c.3: PME# disabled [ 1.833052] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 1.833597] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 1.833669] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.833754] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.833760] pci 0000:00:1c.4: PME# disabled [ 1.834484] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 1.835576] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 1.835648] pci 0000:00:1c.7: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.835732] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.835738] pci 0000:00:1c.7: PME# disabled [ 1.836763] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 1.837332] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 1.837366] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff] [ 1.837523] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.837529] pci 0000:00:1d.0: PME# disabled [ 1.854319] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.854884] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 1.855573] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 1.855611] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7] [ 1.855625] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3] [ 1.855640] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097] [ 1.855655] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083] [ 1.855670] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 1.855685] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff] [ 1.855784] pci 0000:00:1f.2: PME# supported from D3hot [ 1.855790] pci 0000:00:1f.2: PME# disabled [ 1.857295] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 1.857324] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit] [ 1.857369] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 1.858894] pci_bus 0000:00: fixups for bus [ 1.858898] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 0 [ 1.859322] pci_bus 0000:03: scanning bus [ 1.859325] pci_bus 0000:03: fixups for bus [ 1.859327] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 1.859420] pci_bus 0000:03: bus scan returning with max=03 [ 1.859425] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 0 [ 1.859842] pci_bus 0000:05: scanning bus [ 1.859889] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 1.859917] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff] [ 1.859965] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref] [ 1.859994] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref] [ 1.860129] pci 0000:05:00.0: supports D1 D2 [ 1.860131] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.860138] pci 0000:05:00.0: PME# disabled [ 1.860385] pci 0000:05:00.0: System wakeup disabled by ACPI [ 1.918401] pci_bus 0000:05: fixups for bus [ 1.918406] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 1.918489] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 1.918502] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 1.918504] pci_bus 0000:05: bus scan returning with max=05 [ 1.918511] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 0 [ 1.919031] pci_bus 0000:09: scanning bus [ 1.919310] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000 [ 1.919666] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit] [ 1.921188] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 1.921241] pci 0000:09:00.0: PME# disabled [ 1.921650] pci 0000:09:00.0: System wakeup disabled by ACPI [ 1.939492] pci_bus 0000:09: fixups for bus [ 1.939495] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 1.939579] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff] [ 1.939589] pci_bus 0000:09: bus scan returning with max=09 [ 1.939596] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 0 [ 1.940034] pci_bus 0000:0b: scanning bus [ 1.940090] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330 [ 1.940126] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 1.940154] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit] [ 1.940314] pci 0000:0b:00.0: supports D1 D2 [ 1.940315] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.940322] pci 0000:0b:00.0: PME# disabled [ 1.940553] pci 0000:0b:00.0: System wakeup disabled by ACPI [ 1.941146] pci_bus 0000:0b: fixups for bus [ 1.941148] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c] [ 1.941231] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 1.941240] pci_bus 0000:0b: bus scan returning with max=0b [ 1.941246] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 0 [ 1.941657] pci_bus 0000:11: scanning bus [ 1.941661] pci_bus 0000:11: fixups for bus [ 1.941663] pci 0000:00:1c.7: PCI bridge to [bus 11-16] [ 1.941742] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 1.941747] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 1.941757] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 1.941758] pci_bus 0000:11: bus scan returning with max=11 [ 1.941765] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 1 [ 1.941774] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 1 [ 1.941783] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 1 [ 1.941793] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 1 [ 1.941802] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 1 [ 1.941809] pci_bus 0000:00: bus scan returning with max=16 [ 1.941811] pci_bus 0000:00: on NUMA node 0 [ 1.944132] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 1.951332] acpi PNP0A08:00: ACPI _OSC control (0x19) granted [ 1.956349] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.958117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.959882] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.961653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.963435] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.965319] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.967210] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.968992] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.971581] ACPI: Enabled 4 GPEs in block 00 to 3F [ 1.971598] acpi root: \_SB_.PCI0 notify handler is installed [ 1.971747] Found 1 acpi root devices [ 1.972881] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.972994] vgaarb: loaded [ 1.973064] vgaarb: bridge control possible 0000:00:02.0 [ 1.974626] SCSI subsystem initialized [ 1.974704] ACPI: bus type ATA registered [ 1.975298] libata version 3.00 loaded. [ 1.975814] ACPI: bus type USB registered [ 1.976332] usbcore: registered new interface driver usbfs [ 1.976618] usbcore: registered new interface driver hub [ 1.976910] usbcore: registered new device driver usb [ 1.978621] EDAC MC: Ver: 3.0.0 [ 1.982237] wmi: Mapper loaded [ 1.982645] Advanced Linux Sound Architecture Driver Initialized. [ 1.982724] PCI: Using ACPI for IRQ routing [ 1.984641] PCI: pci_cache_line_size set to 64 bytes [ 1.984650] pci 0000:00:02.0: BAR 0: reserving [mem 0xf6800000-0xf6bfffff flags 0x140204] (d=0, p=0) [ 1.984653] pci 0000:00:02.0: BAR 2: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0) [ 1.984655] pci 0000:00:02.0: BAR 4: reserving [io 0xf000-0xf03f flags 0x40101] (d=0, p=0) [ 1.984659] pci 0000:00:16.0: BAR 0: reserving [mem 0xf7f0a000-0xf7f0a00f flags 0x140204] (d=0, p=0) [ 1.984664] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf7f08000-0xf7f083ff flags 0x40200] (d=0, p=0) [ 1.984669] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf7f00000-0xf7f03fff flags 0x140204] (d=0, p=0) [ 1.984677] pci 0000:05:00.0: BAR 0: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0) [ 1.984679] pci 0000:05:00.0: BAR 2: reserving [mem 0xf1104000-0xf1104fff flags 0x14220c] (d=0, p=0) [ 1.984681] pci 0000:05:00.0: BAR 4: reserving [mem 0xf1100000-0xf1103fff flags 0x14220c] (d=0, p=0) [ 1.984689] pci 0000:09:00.0: BAR 0: reserving [mem 0xf7e00000-0xf7e01fff flags 0x140204] (d=0, p=0) [ 1.984696] pci 0000:0b:00.0: BAR 0: reserving [mem 0xf7d00000-0xf7d0ffff flags 0x140204] (d=0, p=0) [ 1.984698] pci 0000:0b:00.0: BAR 2: reserving [mem 0xf7d10000-0xf7d11fff flags 0x140204] (d=0, p=0) [ 1.984704] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf7f07000-0xf7f073ff flags 0x40200] (d=0, p=0) [ 1.984711] pci 0000:00:1f.2: BAR 0: reserving [io 0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0) [ 1.984713] pci 0000:00:1f.2: BAR 1: reserving [io 0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0) [ 1.984715] pci 0000:00:1f.2: BAR 2: reserving [io 0xf090-0xf097 flags 0x40101] (d=0, p=0) [ 1.984716] pci 0000:00:1f.2: BAR 3: reserving [io 0xf080-0xf083 flags 0x40101] (d=0, p=0) [ 1.984718] pci 0000:00:1f.2: BAR 4: reserving [io 0xf060-0xf07f flags 0x40101] (d=0, p=0) [ 1.984720] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf7f06000-0xf7f067ff flags 0x40200] (d=0, p=0) [ 1.984724] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf7f05000-0xf7f050ff flags 0x140204] (d=0, p=0) [ 1.984726] pci 0000:00:1f.3: BAR 4: reserving [io 0xf040-0xf05f flags 0x40101] (d=0, p=0) [ 1.984763] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 1.984785] e820: reserve RAM buffer [mem 0xda4e5000-0xdbffffff] [ 1.984792] e820: reserve RAM buffer [mem 0xda793000-0xdbffffff] [ 1.984800] e820: reserve RAM buffer [mem 0xdaa89000-0xdbffffff] [ 1.984808] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff] [ 1.986272] Bluetooth: Core ver 2.16 [ 1.986522] NET: Registered protocol family 31 [ 1.986597] Bluetooth: HCI device and connection manager initialized [ 1.986694] Bluetooth: HCI socket layer initialized [ 1.986779] Bluetooth: L2CAP socket layer initialized [ 1.986889] Bluetooth: SCO socket layer initialized [ 1.989637] cfg80211: Calling CRDA to update world regulatory domain [ 1.990580] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.991010] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.993104] Switching to clocksource hpet [ 1.993844] pnp: PnP ACPI init [ 1.994004] ACPI: bus type PNP registered [ 1.994268] pnp 00:00: [dma 4] [ 1.994585] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.994975] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 1.996364] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.996935] system 00:03: [io 0x0680-0x069f] has been reserved [ 1.997025] system 00:03: [io 0x1000-0x100f] has been reserved [ 1.997114] system 00:03: [io 0xffff] has been reserved [ 1.997203] system 00:03: [io 0xffff] has been reserved [ 1.997291] system 00:03: [io 0x0400-0x0453] has been reserved [ 1.997381] system 00:03: [io 0x0458-0x047f] has been reserved [ 1.997470] system 00:03: [io 0x0500-0x057f] has been reserved [ 1.997558] system 00:03: [io 0x164e-0x164f] has been reserved [ 1.997638] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.998590] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.999428] system 00:05: [io 0x0454-0x0457] has been reserved [ 1.999508] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.999939] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.000573] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 2.000665] system 00:07: [mem 0xfe800000-0xfe802fff] has been reserved [ 2.000745] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.001277] pnp 00:08: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active) [ 2.001811] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.007014] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.007105] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.007194] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.007285] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.007374] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 2.007463] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.007553] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.007642] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.007732] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 2.007834] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 2.007925] system 00:0a: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 2.008005] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.009405] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active) [ 2.012031] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 2.012122] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved [ 2.012202] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.012870] pnp: PnP ACPI: found 13 devices [ 2.012943] ACPI: bus type PNP unregistered [ 2.044147] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 2.044244] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 2.044321] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 2.044407] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 2.044521] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 2.044600] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff] [ 2.044689] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c] [ 2.044769] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 2.044858] pci 0000:00:1c.7: PCI bridge to [bus 11-16] [ 2.044935] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 2.045016] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 2.045098] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 2.052520] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.052523] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.052525] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.052527] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 2.052528] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 2.052530] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 2.052532] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 2.052533] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 2.052535] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 2.052537] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 2.052538] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff] [ 2.052540] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 2.052542] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref] [ 2.052544] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff] [ 2.052546] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 2.052548] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff] [ 2.052549] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff] [ 2.052551] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref] [ 2.052781] NET: Registered protocol family 2 [ 2.053656] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 2.054050] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 2.059041] TCP: Hash tables configured (established 131072 bind 65536) [ 2.059215] TCP: reno registered [ 2.059325] UDP hash table entries: 8192 (order: 8, 1310720 bytes) [ 2.060696] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes) [ 2.062556] NET: Registered protocol family 1 [ 2.063243] RPC: Registered named UNIX socket transport module. [ 2.064187] RPC: Registered udp transport module. [ 2.064261] RPC: Registered tcp transport module. [ 2.064334] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.064424] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0 [ 2.064426] pci 0000:00:02.0: Boot video device [ 2.064435] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x760 [ 2.185372] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x760 [ 2.305362] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x760 [ 2.306273] PCI: CLS 64 bytes, default 64 [ 2.306595] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.306675] software IO TLB [mem 0xd64e5000-0xda4e5000] (64MB) mapped at [ffff8800d64e5000-ffff8800da4e4fff] [ 2.308983] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 2.309410] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.309518] Scanning for low memory corruption every 60 seconds [ 2.312625] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 2.312833] sha256_ssse3: Using AVX optimized SHA-256 implementation [ 2.312975] sha512_ssse3: Using AVX optimized SHA-512 implementation [ 2.317758] audit: initializing netlink socket (disabled) [ 2.317895] type=2000 audit(1377874979.180:1): initialized [ 2.320306] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.371361] msgmni has been set to 31776 [ 2.377001] NET: Registered protocol family 38 [ 2.377112] Key type asymmetric registered [ 2.377192] Asymmetric key parser 'x509' registered [ 2.377781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.377896] io scheduler noop registered [ 2.377970] io scheduler deadline registered (default) [ 2.378681] io scheduler cfq registered [ 2.381284] pcieport 0000:00:1c.7: irq 40 for MSI/MSI-X [ 2.382321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.383039] pciehp 0000:00:1c.7:pcie04: Hotplug Controller: [ 2.383116] pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 40 [ 2.383222] pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086 [ 2.383299] pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e [ 2.383376] pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3 [ 2.383453] pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028 [ 2.383530] pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40 [ 2.383607] pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff] [ 2.383914] pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff] [ 2.384022] pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit pref] [ 2.384131] pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260 [ 2.384209] pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7 [ 2.384285] pciehp 0000:00:1c.7:pcie04: Attention Button : no [ 2.384361] pciehp 0000:00:1c.7:pcie04: Power Controller : no [ 2.384438] pciehp 0000:00:1c.7:pcie04: MRL Sensor : no [ 2.384514] pciehp 0000:00:1c.7:pcie04: Attention Indicator : no [ 2.384590] pciehp 0000:00:1c.7:pcie04: Power Indicator : no [ 2.384666] pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes [ 2.384744] pciehp 0000:00:1c.7:pcie04: EMI Present : no [ 2.384820] pciehp 0000:00:1c.7:pcie04: Command Completed : no [ 2.384900] pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0000 [ 2.384979] pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000 [ 2.385058] pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported [ 2.385090] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028 ss_did 4b3 [ 2.385264] pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7 [ 2.385355] pci_bus 0000:11: dev 00, created physical slot 7 [ 2.386545] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 28 [ 2.386548] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded [ 2.386698] pciehp: pcie_port_service_register = 0 [ 2.386699] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.387314] intel_idle: MWAIT substates: 0x21120 [ 2.387315] intel_idle: v0.4 model 0x2A [ 2.387316] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.388442] ACPI: AC Adapter [AC] (on-line) [ 2.389998] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 2.391743] ACPI: Lid Switch [LID0] [ 2.392283] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.392427] ACPI: Power Button [PWRB] [ 2.392983] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 2.393098] ACPI: Sleep Button [SBTN] [ 2.393643] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.394006] ACPI: Power Button [PWRF] [ 2.396026] ACPI: Requesting acpi_cpufreq [ 2.492915] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.492995] ACPI: Thermal Zone [THM] (64 C) [ 2.549770] GHES: HEST is not enabled! [ 2.549845] ERST DBG: ERST support is disabled. [ 2.558791] ACPI: Battery Slot [BAT0] (battery present) [ 2.721592] Non-volatile memory driver v1.3 [ 2.721923] Linux agpgart interface v0.103 [ 2.722186] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 2.722187] Hangcheck: Using getrawmonotonic(). [ 2.722393] [drm] Initialized drm 1.1.0 20060810 [ 2.728798] [drm] Memory usable by graphics device = 2048M [ 2.728906] i915 0000:00:02.0: setting latency timer to 64 [ 2.765386] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 2.765486] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.765564] [drm] Driver supports precise vblank timestamp query. [ 2.766053] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.792594] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 2.792673] [drm] This can cause pipe underruns and display issues. [ 2.792749] [drm] Please upgrade your BIOS to fix this. [ 2.917466] fbcon: inteldrmfb (fb0) is primary device [ 3.304852] tsc: Refined TSC clocksource calibration: 2793.653 MHz [ 3.304863] Switching to clocksource tsc [ 4.140924] Console: switching to colour frame buffer device 170x48 [ 4.143268] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.143290] i915 0000:00:02.0: registered panic notifier [ 4.172850] acpi device:34: registered as cooling_device1 [ 4.177138] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.177969] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 4.178190] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 4.178450] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.190457] loop: module loaded [ 4.192420] mei_me 0000:00:16.0: setting latency timer to 64 [ 4.192562] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X [ 4.201466] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) [ 4.201474] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.201517] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 4.201522] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.201561] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 4.201566] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.201605] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 4.201610] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.201647] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.203095] ahci 0000:00:1f.2: version 3.0 [ 4.204841] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 4.204972] ahci: SSS flag set, parallel bus scan disabled [ 4.216010] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 4.216485] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 4.216975] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.264479] scsi0 : ahci [ 4.266729] scsi1 : ahci [ 4.268017] scsi2 : ahci [ 4.269330] scsi3 : ahci [ 4.270637] scsi4 : ahci [ 4.271946] scsi5 : ahci [ 4.274025] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 43 [ 4.274577] ata2: DUMMY [ 4.275131] ata3: DUMMY [ 4.275678] ata4: DUMMY [ 4.276220] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 43 [ 4.276787] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 43 [ 4.278702] tun: Universal TUN/TAP device driver, 1.6 [ 4.279294] tun: (C) 1999-2004 Max Krasnyansky [ 4.280340] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.281549] r8169 0000:05:00.0: enabling Mem-Wr-Inval [ 4.281791] r8169 0000:05:00.0: irq 44 for MSI/MSI-X [ 4.283030] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc9000002c000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 44 [ 4.283693] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.284627] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI [ 4.285737] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.286607] ehci-pci: EHCI PCI platform driver [ 4.288966] ehci-pci 0000:00:1a.0: enabling bus mastering [ 4.288972] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 4.289004] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 4.289800] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.290528] ehci-pci 0000:00:1a.0: debug port 2 [ 4.295178] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 4.295309] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000 [ 4.306801] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.307806] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.308475] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.309139] usb usb1: Product: EHCI Host Controller [ 4.309799] usb usb1: Manufacturer: Linux 3.10.9-default-pciehp ehci_hcd [ 4.310466] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.312538] hub 1-0:1.0: USB hub found [ 4.313266] hub 1-0:1.0: 2 ports detected [ 4.316914] ehci-pci 0000:00:1d.0: enabling bus mastering [ 4.316921] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 4.316932] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.317600] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.318264] ehci-pci 0000:00:1d.0: debug port 2 [ 4.322830] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.322936] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000 [ 4.336112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.336977] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.337619] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.338251] usb usb2: Product: EHCI Host Controller [ 4.338870] usb usb2: Manufacturer: Linux 3.10.9-default-pciehp ehci_hcd [ 4.339494] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.341202] hub 2-0:1.0: USB hub found [ 4.341850] hub 2-0:1.0: 2 ports detected [ 4.344465] xhci_hcd 0000:0b:00.0: enabling bus mastering [ 4.344476] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 4.345142] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3 [ 4.346060] xhci_hcd 0000:0b:00.0: enabling Mem-Wr-Inval [ 4.346207] xhci_hcd 0000:0b:00.0: irq 45 for MSI/MSI-X [ 4.346253] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X [ 4.346874] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.347517] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.348166] usb usb3: Product: xHCI Host Controller [ 4.348806] usb usb3: Manufacturer: Linux 3.10.9-default-pciehp xhci_hcd [ 4.349441] usb usb3: SerialNumber: 0000:0b:00.0 [ 4.350822] xHCI xhci_add_endpoint called for root hub [ 4.350824] xHCI xhci_check_bandwidth called for root hub [ 4.351223] hub 3-0:1.0: USB hub found [ 4.351940] hub 3-0:1.0: 2 ports detected [ 4.353522] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 4.354204] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4 [ 4.355199] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.355845] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.356511] usb usb4: Product: xHCI Host Controller [ 4.357135] usb usb4: Manufacturer: Linux 3.10.9-default-pciehp xhci_hcd [ 4.357761] usb usb4: SerialNumber: 0000:0b:00.0 [ 4.359256] xHCI xhci_add_endpoint called for root hub [ 4.359258] xHCI xhci_check_bandwidth called for root hub [ 4.359679] hub 4-0:1.0: USB hub found [ 4.360344] hub 4-0:1.0: 2 ports detected [ 4.362306] usbcore: registered new interface driver usb-storage [ 4.363140] usbcore: registered new interface driver ums-realtek [ 4.364146] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12 [ 4.367429] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.368100] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.370341] mousedev: PS/2 mouse device common for all mice [ 4.373828] rtc_cmos 00:04: RTC can wake from S4 [ 4.374663] rtc (null): alarm rollover: day [ 4.375164] rtc rtc0: rtc_cmos: dev (254:0) [ 4.375191] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.375857] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.378801] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 4.378808] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.380859] coretemp coretemp.0: TjMax is 100 degrees C [ 4.380896] coretemp coretemp.0: TjMax is 100 degrees C [ 4.380924] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 4.381664] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 4.383223] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.384030] iTCO_vendor_support: vendor-support=0 [ 4.384696] md: linear personality registered for level -1 [ 4.385340] md: raid0 personality registered for level 0 [ 4.385990] md: raid1 personality registered for level 1 [ 4.386669] md: raid10 personality registered for level 10 [ 4.387310] md: raid6 personality registered for level 6 [ 4.387951] md: raid5 personality registered for level 5 [ 4.388580] md: raid4 personality registered for level 4 [ 4.390556] device-mapper: uevent: version 1.0.3 [ 4.392210] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 4.394058] Intel P-state driver initializing. [ 4.394750] Intel pstate controlling: cpu 0 [ 4.396157] cpuidle: using governor ladder [ 4.397486] cpuidle: using governor menu [ 4.398979] sdhci: Secure Digital Host Controller Interface driver [ 4.399585] sdhci: Copyright(c) Pierre Ossman [ 4.403829] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 4.405422] hidraw: raw HID events driver (C) Jiri Kosina [ 4.408807] usbcore: registered new interface driver usbhid [ 4.409413] usbhid: USB HID core driver [ 4.410667] input: Dell WMI hotkeys as /devices/virtual/input/input6 [ 4.414978] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 4.425903] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 4.462530] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.464493] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.466531] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.473250] TCP: cubic registered [ 4.474060] NET: Registered protocol family 17 [ 4.475078] Bluetooth: RFCOMM TTY layer initialized [ 4.475913] Bluetooth: RFCOMM socket layer initialized [ 4.476736] Bluetooth: RFCOMM ver 1.11 [ 4.477519] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.478287] Bluetooth: BNEP filters: protocol multicast [ 4.479058] Bluetooth: BNEP socket layer initialized [ 4.479799] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.480559] Bluetooth: HIDP socket layer initialized [ 4.481385] Key type dns_resolver registered [ 4.484918] PM: Checking hibernation image partition /dev/sda6 [ 4.626603] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.628567] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.639802] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.641106] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133 [ 4.642039] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.652898] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 4.654086] ata1.00: configured for UDMA/133 [ 4.668974] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5 [ 4.674355] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 4.675636] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.677684] sd 0:0:0:0: [sda] Write Protect is off [ 4.678887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.679186] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.682626] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.777785] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.779703] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.785087] hub 1-1:1.0: USB hub found [ 4.787400] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 4.789828] hub 1-1:1.0: 6 ports detected [ 4.813526] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.927110] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.037108] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.044386] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100 [ 5.051777] ata5.00: configured for UDMA/100 [ 5.076833] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5 [ 5.081750] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.083680] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.089838] hub 2-1:1.0: USB hub found [ 5.092047] hub 2-1:1.0: 8 ports detected [ 5.113950] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.113965] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.120022] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 5.122478] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 5.227383] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 5.251069] usb 3-1: New USB device found, idVendor=2109, idProduct=3431 [ 5.252927] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.254781] usb 3-1: Product: USB2.0 Hub [ 5.286259] hub 3-1:1.0: USB hub found [ 5.288815] hub 3-1:1.0: 4 ports detected [ 5.417640] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 5.441218] usb 3-2: New USB device found, idVendor=2109, idProduct=0811 [ 5.443124] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.445009] usb 3-2: Product: USB2.0 Hub [ 5.467687] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.471001] ata6.00: ATA-8: ST3000VX000-1CU166, CV22, max UDMA/133 [ 5.472933] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.476152] ata6.00: configured for UDMA/133 [ 5.480557] scsi 5:0:0:0: Direct-Access ATA ST3000VX000-1CU1 CV22 PQ: 0 ANSI: 5 [ 5.483514] hub 3-2:1.0: USB hub found [ 5.487364] hub 3-2:1.0: 4 ports detected [ 5.495192] sd 5:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 5.497124] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 5.502216] sd 5:0:0:0: [sdb] Write Protect is off [ 5.504088] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.504747] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 5.509797] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.575567] sdb: sdb1 [ 5.582810] sd 5:0:0:0: [sdb] Attached SCSI disk [ 5.616194] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input11 [ 5.630461] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 5.636471] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.643970] PM: Hibernation image partition 8:6 present [ 5.643977] PM: Looking for hibernation image. [ 5.677358] PM: Image not found (code -22) [ 5.677366] PM: Hibernation image not present or could not be loaded. [ 5.677484] registered taskstats version 1 [ 5.680098] kmemleak: Kernel memory leak detector initialized [ 5.686448] kmemleak: Automatic memory scanning thread started [ 5.688698] rtc_cmos 00:04: setting system clock to 2013-08-30 15:03:03 UTC (1377874983) [ 5.690623] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 5.698684] ALSA device list: [ 5.700578] #0: HDA Intel PCH at 0xf7f00000 irq 47 [ 5.703510] md: Waiting for all devices to be available before autodetect [ 5.705440] md: If you don't use raid, use raid=noautodetect [ 5.712768] md: Autodetecting RAID arrays. [ 5.714651] md: Scanned 0 and added 0 devices. [ 5.716521] md: autorun ... [ 5.718446] md: ... autorun DONE. [ 5.763127] EXT3-fs (sda5): recovery required on readonly filesystem [ 5.765024] EXT3-fs (sda5): write access will be enabled during recovery [ 5.801354] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 5.962022] usb 4-1: New USB device found, idVendor=2109, idProduct=0810 [ 5.964013] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.965942] usb 4-1: Product: 4-Port USB 3.0 Hub [ 5.967843] usb 4-1: Manufacturer: VIA Labs, Inc. [ 6.038419] hub 4-1:1.0: USB hub found [ 6.085424] hub 4-1:1.0: 4 ports detected [ 6.261030] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd [ 6.262982] hub 4-1:1.0: hub_port_status failed (err = -71) [ 6.306883] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 6.345112] usb 4-2: New USB device found, idVendor=2109, idProduct=0811 [ 6.347144] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.349169] usb 4-2: Product: 4-Port USB 3.0 Hub [ 6.351124] usb 4-2: Manufacturer: VIA Labs, Inc. [ 6.422094] hub 4-2:1.0: USB hub found [ 6.430581] hub 4-2:1.0: 4 ports detected [ 6.603148] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 6.762503] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820 [ 6.764490] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.766393] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD [ 6.768308] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00 [ 6.923440] usb 2-1.2: new low-speed USB device number 3 using ehci-pci [ 7.077901] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116 [ 7.079874] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.081773] usb 2-1.2: Product: USB Keyboard [ 7.083635] usb 2-1.2: Manufacturer: CHICONY [ 7.123199] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input13 [ 7.137495] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0 [ 7.221126] usb 2-1.3: new full-speed USB device number 4 using ehci-pci [ 7.345112] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011 [ 7.347088] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 7.349024] usb 2-1.3: SerialNumber: 56ed5821afe2 [ 7.451371] usb 3-2.4: new low-speed USB device number 4 using xhci_hcd [ 7.510981] usb 3-2.4: New USB device found, idVendor=046d, idProduct=c050 [ 7.512920] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.514829] usb 3-2.4: Product: USB-PS/2 Optical Mouse [ 7.516726] usb 3-2.4: Manufacturer: Logitech [ 7.552051] usb 3-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 7.569165] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-2/3-2.4/3-2.4:1.0/input/input14 [ 7.575598] hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-2.4/input0 [ 12.270269] kjournald starting. Commit interval 5 seconds [ 12.278738] EXT3-fs (sda5): recovery complete [ 12.280856] EXT3-fs (sda5): mounted filesystem with writeback data mode [ 12.283064] VFS: Mounted root (ext3 filesystem) readonly on device 8:5. [ 12.336424] devtmpfs: mounted [ 12.338942] Freeing unused kernel memory: 908k freed [ 12.341261] Write protecting the kernel read-only data: 12288k [ 12.346811] Freeing unused kernel memory: 380k freed [ 12.352957] Freeing unused kernel memory: 812k freed [ 17.377211] systemd-udevd[1961]: starting version 206 [ 19.400734] systemd-udevd[1984]: renamed network interface eth0 to enp5s0 [ 20.794698] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 20.794705] Copyright(c) 2003-2013 Intel Corporation [ 20.796801] iwlwifi 0000:09:00.0: irq 48 for MSI/MSI-X [ 21.209663] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 22.821938] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 22.821948] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 22.821953] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 22.821958] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 22.821962] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled [ 22.821970] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0 [ 22.822112] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S [ 22.840366] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio. [ 22.847097] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 23.089488] systemd-udevd[1981]: renamed network interface wlan0 to wlp9s0 [ 26.952013] EXT3-fs (sda5): using internal journal [ 27.464629] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k FS [ 35.694208] r8169 0000:05:00.0 enp5s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) [ 35.719229] r8169 0000:05:00.0 enp5s0: link down [ 35.719783] r8169 0000:05:00.0 enp5s0: link down [ 37.404140] r8169 0000:05:00.0 enp5s0: link up [ 51.146153] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 51.147362] microcode: CPU0 updated to revision 0x28, date = 2012-04-24 [ 51.147371] perf_event_intel: PEBS enabled due to microcode update [ 53.822197] usb 4-2.3: new SuperSpeed USB device number 4 using xhci_hcd [ 53.843616] usb 4-2.3: Parent hub missing LPM exit latency info. Power management will be impacted. [ 53.852133] usb 4-2.3: New USB device found, idVendor=174c, idProduct=5106 [ 53.852146] usb 4-2.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 53.852152] usb 4-2.3: Product: AS2105 [ 53.852160] usb 4-2.3: Manufacturer: ASMedia [ 53.852164] usb 4-2.3: SerialNumber: WD-WX51C10U8155 [ 53.861118] usb-storage 4-2.3:1.0: USB Mass Storage device detected [ 53.874142] scsi6 : usb-storage 4-2.3:1.0 [ 54.874043] scsi 6:0:0:0: Direct-Access WDC WD10 TPVT-00HT5T0 01.0 PQ: 0 ANSI: 5 [ 54.877559] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 54.878712] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 54.880796] sd 6:0:0:0: [sdc] Write Protect is off [ 54.880799] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 54.884024] sd 6:0:0:0: [sdc] No Caching mode page present [ 54.884034] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 54.889908] sd 6:0:0:0: [sdc] No Caching mode page present [ 54.889910] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 55.187747] sdc: sdc1 [ 55.195799] sd 6:0:0:0: [sdc] No Caching mode page present [ 55.195810] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 55.195825] sd 6:0:0:0: [sdc] Attached SCSI disk [ 118.141658] kjournald starting. Commit interval 5 seconds [ 118.141864] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [ 118.142428] EXT3-fs (sdc1): using internal journal [ 118.142438] EXT3-fs (sdc1): mounted filesystem with writeback data mode [ 558.612619] EXT4-fs (sdb1): recovery complete [ 558.632886] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 948.086413] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)