linux-kernel - [gcv v4 15/38] watchdog: Replace __get_cpu

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <00000140e53d5f3e-a6ae67f9-6390-4563-863a-7f41e7428e37-000000@email.amazonses.com>
Date:	Tue, 3 Sep 2013 19:12:20 +0000
From:	Christoph Lameter <cl@...ux.com>
To:	Tejun Heo <tj@...nel.org>
Cc:	Peter Zijlstra <peterz@...radead.org>
Subject: [gcv v4 15/38] watchdog: Replace __get_cpu_var uses

__get_cpu_var() is used for multiple purposes in the kernel source. One of them is
address calculation via the form &__get_cpu_var(x). This calculates the address for
the instance of the percpu variable of the current processor based on an offset.

Other use cases are for storing and retrieving data from the current processors percpu area.
__get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination. However, store and retrieve operations
could use a segment prefix (or global register on other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use
optimized assembly code to read and write per cpu variables.

This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr()
or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided
and less registers are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too.

The patch set includes passes over all arches as well. Once these operations are used throughout then
specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by
f.e. using a global register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	this_cpu_inc(y)

Signed-off-by: Christoph Lameter <cl@...ux.com>

Index: linux/kernel/watchdog.c
===================================================================
--- linux.orig/kernel/watchdog.c	2013-08-26 14:28:39.000000000 -0500
+++ linux/kernel/watchdog.c	2013-08-26 14:29:34.471034451 -0500
@@ -174,8 +174,8 @@ EXPORT_SYMBOL(touch_nmi_watchdog);

 void touch_softlockup_watchdog_sync(void)
 {
-	__raw_get_cpu_var(softlockup_touch_sync) = true;
-	__raw_get_cpu_var(watchdog_touch_ts) = 0;
+	__this_cpu_write(softlockup_touch_sync, 1);
+	__this_cpu_write(watchdog_touch_ts, 0);
 }

 #ifdef CONFIG_HARDLOCKUP_DETECTOR
@@ -341,7 +341,7 @@ static void watchdog_set_prio(unsigned i

 static void watchdog_enable(unsigned int cpu)
 {
-	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
+	struct hrtimer *hrtimer = __this_cpu_ptr(&watchdog_hrtimer);

 	/* kick off the timer for the hardlockup detector */
 	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
@@ -361,7 +361,7 @@ static void watchdog_enable(unsigned int

 static void watchdog_disable(unsigned int cpu)
 {
-	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
+	struct hrtimer *hrtimer = __this_cpu_ptr(&watchdog_hrtimer);

 	watchdog_set_prio(SCHED_NORMAL, 0);
 	hrtimer_cancel(hrtimer);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/