lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5226CF51.9050207@gmail.com>
Date:	Wed, 04 Sep 2013 11:42:33 +0530
From:	Kumar Gaurav <kumargauravgupta3@...il.com>
To:	Sarah Sharp <sarah.a.sharp@...ux.intel.com>
CC:	gregkh@...uxfoundation.org, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org, kernel-janitors@...r.kernel.org,
	Dan Carpenter <dan.carpenter@...cle.com>
Subject: Re: [PATCH v4:No Change] xHCI:Fixing xhci_readl definition and function
 call

On Tuesday 03 September 2013 09:34 PM, Sarah Sharp wrote:
> I'm confused.  I said the last version of this patch didn't apply
> against usb-next, and you should rebase it.  Why did you put "No Change"
> in the subject prefix?
I miss understood what Dan said. he said me to add no change if there's 
no change from previous patch, but he didn't meant in subject (my bad).
>
> On Sat, Aug 31, 2013 at 11:02:45PM +0530, Kumar Gaurav wrote:
>> This patch redefine function xhci_readl. xhci_readl function doesn't use xhci_hcd argument.
>> Hence there is no need of keeping it in the function arguments.
>>
>> Redefining this function breaks other functions which calls this function.
>> This phatch also correct those calls in xhci driver.
>>
>> Signed-off-by: Kumar Gaurav <kumargauravgupta3@...il.com>
>> ---
> You didn't describe why you're resending this, or what changed.  If you
> did rebase this against usb-next, you should have left the subject
> prefix as "PATCH v4" and said here:
>
> v4:
>   - rebased against usb-next
>
> You can do this by generating the patch with `git format-patch`, edit
> the patch manually (in whatever directory it was created it), and then
> send it by passing the file to `git send-email`.
>
> Sarah Sharp
I rebased it against linux-next and i'll send the same patch as you 
discribed but please do let me know if i need to mark that as "patch v5"
as this patch won't have any change in changelog
>>   drivers/usb/host/xhci-dbg.c  |   36 ++++++++---------
>>   drivers/usb/host/xhci-hub.c  |   72 ++++++++++++++++-----------------
>>   drivers/usb/host/xhci-mem.c  |   20 ++++-----
>>   drivers/usb/host/xhci-ring.c |   12 +++---
>>   drivers/usb/host/xhci.c      |   92 +++++++++++++++++++++---------------------
>>   drivers/usb/host/xhci.h      |    3 +-
>>   6 files changed, 117 insertions(+), 118 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
>> index 73503a8..229e312 100644
>> --- a/drivers/usb/host/xhci-dbg.c
>> +++ b/drivers/usb/host/xhci-dbg.c
>> @@ -32,7 +32,7 @@ void xhci_dbg_regs(struct xhci_hcd *xhci)
>>   
>>   	xhci_dbg(xhci, "// xHCI capability registers at %p:\n",
>>   			xhci->cap_regs);
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
>> +	temp = xhci_readl(&xhci->cap_regs->hc_capbase);
>>   	xhci_dbg(xhci, "// @%p = 0x%x (CAPLENGTH AND HCIVERSION)\n",
>>   			&xhci->cap_regs->hc_capbase, temp);
>>   	xhci_dbg(xhci, "//   CAPLENGTH: 0x%x\n",
>> @@ -44,13 +44,13 @@ void xhci_dbg_regs(struct xhci_hcd *xhci)
>>   
>>   	xhci_dbg(xhci, "// xHCI operational registers at %p:\n", xhci->op_regs);
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
>> +	temp = xhci_readl(&xhci->cap_regs->run_regs_off);
>>   	xhci_dbg(xhci, "// @%p = 0x%x RTSOFF\n",
>>   			&xhci->cap_regs->run_regs_off,
>>   			(unsigned int) temp & RTSOFF_MASK);
>>   	xhci_dbg(xhci, "// xHCI runtime registers at %p:\n", xhci->run_regs);
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->db_off);
>> +	temp = xhci_readl(&xhci->cap_regs->db_off);
>>   	xhci_dbg(xhci, "// @%p = 0x%x DBOFF\n", &xhci->cap_regs->db_off, temp);
>>   	xhci_dbg(xhci, "// Doorbell array at %p:\n", xhci->dba);
>>   }
>> @@ -61,7 +61,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>   
>>   	xhci_dbg(xhci, "xHCI capability registers at %p:\n", xhci->cap_regs);
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
>> +	temp = xhci_readl(&xhci->cap_regs->hc_capbase);
>>   	xhci_dbg(xhci, "CAPLENGTH AND HCIVERSION 0x%x:\n",
>>   			(unsigned int) temp);
>>   	xhci_dbg(xhci, "CAPLENGTH: 0x%x\n",
>> @@ -69,7 +69,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>   	xhci_dbg(xhci, "HCIVERSION: 0x%x\n",
>>   			(unsigned int) HC_VERSION(temp));
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
>> +	temp = xhci_readl(&xhci->cap_regs->hcs_params1);
>>   	xhci_dbg(xhci, "HCSPARAMS 1: 0x%x\n",
>>   			(unsigned int) temp);
>>   	xhci_dbg(xhci, "  Max device slots: %u\n",
>> @@ -79,7 +79,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>   	xhci_dbg(xhci, "  Max ports: %u\n",
>>   			(unsigned int) HCS_MAX_PORTS(temp));
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
>> +	temp = xhci_readl(&xhci->cap_regs->hcs_params2);
>>   	xhci_dbg(xhci, "HCSPARAMS 2: 0x%x\n",
>>   			(unsigned int) temp);
>>   	xhci_dbg(xhci, "  Isoc scheduling threshold: %u\n",
>> @@ -87,7 +87,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>   	xhci_dbg(xhci, "  Maximum allowed segments in event ring: %u\n",
>>   			(unsigned int) HCS_ERST_MAX(temp));
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
>> +	temp = xhci_readl(&xhci->cap_regs->hcs_params3);
>>   	xhci_dbg(xhci, "HCSPARAMS 3 0x%x:\n",
>>   			(unsigned int) temp);
>>   	xhci_dbg(xhci, "  Worst case U1 device exit latency: %u\n",
>> @@ -95,14 +95,14 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
>>   	xhci_dbg(xhci, "  Worst case U2 device exit latency: %u\n",
>>   			(unsigned int) HCS_U2_LATENCY(temp));
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
>> +	temp = xhci_readl(&xhci->cap_regs->hcc_params);
>>   	xhci_dbg(xhci, "HCC PARAMS 0x%x:\n", (unsigned int) temp);
>>   	xhci_dbg(xhci, "  HC generates %s bit addresses\n",
>>   			HCC_64BIT_ADDR(temp) ? "64" : "32");
>>   	/* FIXME */
>>   	xhci_dbg(xhci, "  FIXME: more HCCPARAMS debugging\n");
>>   
>> -	temp = xhci_readl(xhci, &xhci->cap_regs->run_regs_off);
>> +	temp = xhci_readl(&xhci->cap_regs->run_regs_off);
>>   	xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
>>   }
>>   
>> @@ -110,7 +110,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci)
>>   {
>>   	u32 temp;
>>   
>> -	temp = xhci_readl(xhci, &xhci->op_regs->command);
>> +	temp = xhci_readl(&xhci->op_regs->command);
>>   	xhci_dbg(xhci, "USBCMD 0x%x:\n", temp);
>>   	xhci_dbg(xhci, "  HC is %s\n",
>>   			(temp & CMD_RUN) ? "running" : "being stopped");
>> @@ -128,7 +128,7 @@ static void xhci_print_status(struct xhci_hcd *xhci)
>>   {
>>   	u32 temp;
>>   
>> -	temp = xhci_readl(xhci, &xhci->op_regs->status);
>> +	temp = xhci_readl(&xhci->op_regs->status);
>>   	xhci_dbg(xhci, "USBSTS 0x%x:\n", temp);
>>   	xhci_dbg(xhci, "  Event ring is %sempty\n",
>>   			(temp & STS_EINT) ? "not " : "");
>> @@ -163,7 +163,7 @@ static void xhci_print_ports(struct xhci_hcd *xhci)
>>   		for (j = 0; j < NUM_PORT_REGS; ++j) {
>>   			xhci_dbg(xhci, "%p port %s reg = 0x%x\n",
>>   					addr, names[j],
>> -					(unsigned int) xhci_readl(xhci, addr));
>> +					(unsigned int) xhci_readl(addr));
>>   			addr++;
>>   		}
>>   	}
>> @@ -177,7 +177,7 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
>>   	u64 temp_64;
>>   
>>   	addr = &ir_set->irq_pending;
>> -	temp = xhci_readl(xhci, addr);
>> +	temp = xhci_readl(addr);
>>   	if (temp == XHCI_INIT_VALUE)
>>   		return;
>>   
>> @@ -187,17 +187,17 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
>>   			(unsigned int)temp);
>>   
>>   	addr = &ir_set->irq_control;
>> -	temp = xhci_readl(xhci, addr);
>> +	temp = xhci_readl(addr);
>>   	xhci_dbg(xhci, "  %p: ir_set.control = 0x%x\n", addr,
>>   			(unsigned int)temp);
>>   
>>   	addr = &ir_set->erst_size;
>> -	temp = xhci_readl(xhci, addr);
>> +	temp = xhci_readl(addr);
>>   	xhci_dbg(xhci, "  %p: ir_set.erst_size = 0x%x\n", addr,
>>   			(unsigned int)temp);
>>   
>>   	addr = &ir_set->rsvd;
>> -	temp = xhci_readl(xhci, addr);
>> +	temp = xhci_readl(addr);
>>   	if (temp != XHCI_INIT_VALUE)
>>   		xhci_dbg(xhci, "  WARN: %p: ir_set.rsvd = 0x%x\n",
>>   				addr, (unsigned int)temp);
>> @@ -219,12 +219,12 @@ void xhci_print_run_regs(struct xhci_hcd *xhci)
>>   	int i;
>>   
>>   	xhci_dbg(xhci, "xHCI runtime registers at %p:\n", xhci->run_regs);
>> -	temp = xhci_readl(xhci, &xhci->run_regs->microframe_index);
>> +	temp = xhci_readl(&xhci->run_regs->microframe_index);
>>   	xhci_dbg(xhci, "  %p: Microframe index = 0x%x\n",
>>   			&xhci->run_regs->microframe_index,
>>   			(unsigned int) temp);
>>   	for (i = 0; i < 7; ++i) {
>> -		temp = xhci_readl(xhci, &xhci->run_regs->rsvd[i]);
>> +		temp = xhci_readl(&xhci->run_regs->rsvd[i]);
>>   		if (temp != XHCI_INIT_VALUE)
>>   			xhci_dbg(xhci, "  WARN: %p: Rsvd[%i] = 0x%x\n",
>>   					&xhci->run_regs->rsvd[i],
>> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
>> index fae697e..22758e7 100644
>> --- a/drivers/usb/host/xhci-hub.c
>> +++ b/drivers/usb/host/xhci-hub.c
>> @@ -94,7 +94,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
>>   	 */
>>   	memset(port_removable, 0, sizeof(port_removable));
>>   	for (i = 0; i < ports; i++) {
>> -		portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
>> +		portsc = xhci_readl(xhci->usb2_ports[i]);
>>   		/* If a device is removable, PORTSC reports a 0, same as in the
>>   		 * hub descriptor DeviceRemovable bits.
>>   		 */
>> @@ -148,7 +148,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
>>   	port_removable = 0;
>>   	/* bit 0 is reserved, bit 1 is for port 1, etc. */
>>   	for (i = 0; i < ports; i++) {
>> -		portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
>> +		portsc = xhci_readl(xhci->usb3_ports[i]);
>>   		if (portsc & PORT_DEV_REMOVE)
>>   			port_removable |= 1 << (i + 1);
>>   	}
>> @@ -343,7 +343,7 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
>>   
>>   	/* Write 1 to disable the port */
>>   	xhci_writel(xhci, port_status | PORT_PE, addr);
>> -	port_status = xhci_readl(xhci, addr);
>> +	port_status = xhci_readl(addr);
>>   	xhci_dbg(xhci, "disable port, actual port %d status  = 0x%x\n",
>>   			wIndex, port_status);
>>   }
>> @@ -389,7 +389,7 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
>>   	}
>>   	/* Change bits are all write 1 to clear */
>>   	xhci_writel(xhci, port_status | status, addr);
>> -	port_status = xhci_readl(xhci, addr);
>> +	port_status = xhci_readl(addr);
>>   	xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
>>   			port_change_bit, wIndex, port_status);
>>   }
>> @@ -415,7 +415,7 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
>>   {
>>   	u32 temp;
>>   
>> -	temp = xhci_readl(xhci, port_array[port_id]);
>> +	temp = xhci_readl(port_array[port_id]);
>>   	temp = xhci_port_state_to_neutral(temp);
>>   	temp &= ~PORT_PLS_MASK;
>>   	temp |= PORT_LINK_STROBE | link_state;
>> @@ -427,7 +427,7 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
>>   {
>>   	u32 temp;
>>   
>> -	temp = xhci_readl(xhci, port_array[port_id]);
>> +	temp = xhci_readl(port_array[port_id]);
>>   	temp = xhci_port_state_to_neutral(temp);
>>   
>>   	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
>> @@ -454,7 +454,7 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
>>   {
>>   	u32 temp;
>>   
>> -	temp = xhci_readl(xhci, port_array[port_id]);
>> +	temp = xhci_readl(port_array[port_id]);
>>   	if (temp & port_bit) {
>>   		temp = xhci_port_state_to_neutral(temp);
>>   		temp |= port_bit;
>> @@ -707,12 +707,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   		/* Set the U1 and U2 exit latencies. */
>>   		memcpy(buf, &usb_bos_descriptor,
>>   				USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
>> -		temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
>> +		temp = xhci_readl(&xhci->cap_regs->hcs_params3);
>>   		buf[12] = HCS_U1_LATENCY(temp);
>>   		put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
>>   
>>   		/* Indicate whether the host has LTM support. */
>> -		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
>> +		temp = xhci_readl(&xhci->cap_regs->hcc_params);
>>   		if (HCC_LTC(temp))
>>   			buf[8] |= USB_LTM_SUPPORT;
>>   
>> @@ -722,7 +722,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   		if (!wIndex || wIndex > max_ports)
>>   			goto error;
>>   		wIndex--;
>> -		temp = xhci_readl(xhci, port_array[wIndex]);
>> +		temp = xhci_readl(port_array[wIndex]);
>>   		if (temp == 0xffffffff) {
>>   			retval = -ENODEV;
>>   			break;
>> @@ -749,7 +749,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   		if (!wIndex || wIndex > max_ports)
>>   			goto error;
>>   		wIndex--;
>> -		temp = xhci_readl(xhci, port_array[wIndex]);
>> +		temp = xhci_readl(port_array[wIndex]);
>>   		if (temp == 0xffffffff) {
>>   			retval = -ENODEV;
>>   			break;
>> @@ -758,7 +758,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   		/* FIXME: What new port features do we need to support? */
>>   		switch (wValue) {
>>   		case USB_PORT_FEAT_SUSPEND:
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			if ((temp & PORT_PLS_MASK) != XDEV_U0) {
>>   				/* Resume the port to U0 first */
>>   				xhci_set_link_state(xhci, port_array, wIndex,
>> @@ -771,7 +771,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   			 * a port unless the port reports that it is in the
>>   			 * enabled (PED = ‘1’,PLS < ‘3’) state.
>>   			 */
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
>>   				|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
>>   				xhci_warn(xhci, "USB core suspending device "
>> @@ -796,11 +796,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   			msleep(10); /* wait device to enter */
>>   			spin_lock_irqsave(&xhci->lock, flags);
>>   
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			bus_state->suspended_ports |= 1 << wIndex;
>>   			break;
>>   		case USB_PORT_FEAT_LINK_STATE:
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   
>>   			/* Disable port */
>>   			if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
>> @@ -815,7 +815,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   					PORT_CEC;
>>   				xhci_writel(xhci, temp | PORT_PE,
>>   					port_array[wIndex]);
>> -				temp = xhci_readl(xhci, port_array[wIndex]);
>> +				temp = xhci_readl(port_array[wIndex]);
>>   				break;
>>   			}
>>   
>> @@ -824,7 +824,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   				xhci_dbg(xhci, "Enable port %d\n", wIndex);
>>   				xhci_set_link_state(xhci, port_array, wIndex,
>>   						link_state);
>> -				temp = xhci_readl(xhci, port_array[wIndex]);
>> +				temp = xhci_readl(port_array[wIndex]);
>>   				break;
>>   			}
>>   
>> @@ -858,7 +858,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   			msleep(20); /* wait device to enter */
>>   			spin_lock_irqsave(&xhci->lock, flags);
>>   
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			if (link_state == USB_SS_PORT_LS_U3)
>>   				bus_state->suspended_ports |= 1 << wIndex;
>>   			break;
>> @@ -872,7 +872,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   			xhci_writel(xhci, temp | PORT_POWER,
>>   					port_array[wIndex]);
>>   
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n", wIndex, temp);
>>   
>>   			spin_unlock_irqrestore(&xhci->lock, flags);
>> @@ -887,13 +887,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   			temp = (temp | PORT_RESET);
>>   			xhci_writel(xhci, temp, port_array[wIndex]);
>>   
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
>>   			break;
>>   		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
>>   			xhci_set_remote_wake_mask(xhci, port_array,
>>   					wIndex, wake_mask);
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			xhci_dbg(xhci, "set port remote wake mask, "
>>   					"actual port %d status  = 0x%x\n",
>>   					wIndex, temp);
>> @@ -902,12 +902,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   			temp |= PORT_WR;
>>   			xhci_writel(xhci, temp, port_array[wIndex]);
>>   
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			break;
>>   		case USB_PORT_FEAT_U1_TIMEOUT:
>>   			if (hcd->speed != HCD_USB3)
>>   				goto error;
>> -			temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
>> +			temp = xhci_readl(port_array[wIndex] + PORTPMSC);
>>   			temp &= ~PORT_U1_TIMEOUT_MASK;
>>   			temp |= PORT_U1_TIMEOUT(timeout);
>>   			xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
>> @@ -915,7 +915,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   		case USB_PORT_FEAT_U2_TIMEOUT:
>>   			if (hcd->speed != HCD_USB3)
>>   				goto error;
>> -			temp = xhci_readl(xhci, port_array[wIndex] + PORTPMSC);
>> +			temp = xhci_readl(port_array[wIndex] + PORTPMSC);
>>   			temp &= ~PORT_U2_TIMEOUT_MASK;
>>   			temp |= PORT_U2_TIMEOUT(timeout);
>>   			xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
>> @@ -924,13 +924,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   			goto error;
>>   		}
>>   		/* unblock any posted writes */
>> -		temp = xhci_readl(xhci, port_array[wIndex]);
>> +		temp = xhci_readl(port_array[wIndex]);
>>   		break;
>>   	case ClearPortFeature:
>>   		if (!wIndex || wIndex > max_ports)
>>   			goto error;
>>   		wIndex--;
>> -		temp = xhci_readl(xhci, port_array[wIndex]);
>> +		temp = xhci_readl(port_array[wIndex]);
>>   		if (temp == 0xffffffff) {
>>   			retval = -ENODEV;
>>   			break;
>> @@ -939,7 +939,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>   		temp = xhci_port_state_to_neutral(temp);
>>   		switch (wValue) {
>>   		case USB_PORT_FEAT_SUSPEND:
>> -			temp = xhci_readl(xhci, port_array[wIndex]);
>> +			temp = xhci_readl(port_array[wIndex]);
>>   			xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
>>   			xhci_dbg(xhci, "PORTSC %04x\n", temp);
>>   			if (temp & PORT_RESET)
>> @@ -1044,7 +1044,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
>>   	spin_lock_irqsave(&xhci->lock, flags);
>>   	/* For each port, did anything change?  If so, set that bit in buf. */
>>   	for (i = 0; i < max_ports; i++) {
>> -		temp = xhci_readl(xhci, port_array[i]);
>> +		temp = xhci_readl(port_array[i]);
>>   		if (temp == 0xffffffff) {
>>   			retval = -ENODEV;
>>   			break;
>> @@ -1098,7 +1098,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
>>   		u32 t1, t2;
>>   		int slot_id;
>>   
>> -		t1 = xhci_readl(xhci, port_array[port_index]);
>> +		t1 = xhci_readl(port_array[port_index]);
>>   		t2 = xhci_port_state_to_neutral(t1);
>>   
>>   		if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
>> @@ -1140,7 +1140,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
>>   
>>   			/* Get the port power control register address. */
>>   			addr = port_array[port_index] + PORTPMSC;
>> -			tmp = xhci_readl(xhci, addr);
>> +			tmp = xhci_readl(addr);
>>   			tmp |= PORT_RWE;
>>   			xhci_writel(xhci, tmp, addr);
>>   		}
>> @@ -1173,7 +1173,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
>>   	}
>>   
>>   	/* delay the irqs */
>> -	temp = xhci_readl(xhci, &xhci->op_regs->command);
>> +	temp = xhci_readl(&xhci->op_regs->command);
>>   	temp &= ~CMD_EIE;
>>   	xhci_writel(xhci, temp, &xhci->op_regs->command);
>>   
>> @@ -1184,7 +1184,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
>>   		u32 temp;
>>   		int slot_id;
>>   
>> -		temp = xhci_readl(xhci, port_array[port_index]);
>> +		temp = xhci_readl(port_array[port_index]);
>>   		if (DEV_SUPERSPEED(temp))
>>   			temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
>>   		else
>> @@ -1232,20 +1232,20 @@ int xhci_bus_resume(struct usb_hcd *hcd)
>>   			 * the port power control register address.
>>   			 */
>>   			addr = port_array[port_index] + PORTPMSC;
>> -			tmp = xhci_readl(xhci, addr);
>> +			tmp = xhci_readl(addr);
>>   			tmp &= ~PORT_RWE;
>>   			xhci_writel(xhci, tmp, addr);
>>   		}
>>   	}
>>   
>> -	(void) xhci_readl(xhci, &xhci->op_regs->command);
>> +	(void) xhci_readl(&xhci->op_regs->command);
>>   
>>   	bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
>>   	/* re-enable irqs */
>> -	temp = xhci_readl(xhci, &xhci->op_regs->command);
>> +	temp = xhci_readl(&xhci->op_regs->command);
>>   	temp |= CMD_EIE;
>>   	xhci_writel(xhci, temp, &xhci->op_regs->command);
>> -	temp = xhci_readl(xhci, &xhci->op_regs->command);
>> +	temp = xhci_readl(&xhci->op_regs->command);
>>   
>>   	spin_unlock_irqrestore(&xhci->lock, flags);
>>   	return 0;
>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
>> index 53b972c..e7a974b 100644
>> --- a/drivers/usb/host/xhci-mem.c
>> +++ b/drivers/usb/host/xhci-mem.c
>> @@ -1995,7 +1995,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
>>   	}
>>   
>>   	/* Port offset and count in the third dword, see section 7.2 */
>> -	temp = xhci_readl(xhci, addr + 2);
>> +	temp = xhci_readl(addr + 2);
>>   	port_offset = XHCI_EXT_PORT_OFF(temp);
>>   	port_count = XHCI_EXT_PORT_COUNT(temp);
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>> @@ -2078,7 +2078,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
>>   	int cap_count = 0;
>>   
>>   	addr = &xhci->cap_regs->hcc_params;
>> -	offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
>> +	offset = XHCI_HCC_EXT_CAPS(xhci_readl(addr));
>>   	if (offset == 0) {
>>   		xhci_err(xhci, "No Extended Capability registers, "
>>   				"unable to set up roothub.\n");
>> @@ -2115,7 +2115,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
>>   	/* count extended protocol capability entries for later caching */
>>   	do {
>>   		u32 cap_id;
>> -		cap_id = xhci_readl(xhci, tmp_addr);
>> +		cap_id = xhci_readl(tmp_addr);
>>   		if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
>>   			cap_count++;
>>   		tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id);
>> @@ -2129,7 +2129,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
>>   	while (1) {
>>   		u32 cap_id;
>>   
>> -		cap_id = xhci_readl(xhci, addr);
>> +		cap_id = xhci_readl(addr);
>>   		if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
>>   			xhci_add_in_port(xhci, num_ports, addr,
>>   					(u8) XHCI_EXT_PORT_MAJOR(cap_id),
>> @@ -2234,7 +2234,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>   	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
>>   	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
>>   
>> -	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
>> +	page_size = xhci_readl(&xhci->op_regs->page_size);
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"Supported page size register = 0x%x", page_size);
>>   	for (i = 0; i < 16; i++) {
>> @@ -2257,10 +2257,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>   	 * Program the Number of Device Slots Enabled field in the CONFIG
>>   	 * register with the max value of slots the HC can handle.
>>   	 */
>> -	val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
>> +	val = HCS_MAX_SLOTS(xhci_readl(&xhci->cap_regs->hcs_params1));
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"// xHC can handle at most %d device slots.", val);
>> -	val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
>> +	val2 = xhci_readl(&xhci->op_regs->config_reg);
>>   	val |= (val2 & ~HCS_SLOTS_MASK);
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"// Setting Max device slots reg = 0x%x.", val);
>> @@ -2341,7 +2341,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>   	 */
>>   	xhci->cmd_ring_reserved_trbs++;
>>   
>> -	val = xhci_readl(xhci, &xhci->cap_regs->db_off);
>> +	val = xhci_readl(&xhci->cap_regs->db_off);
>>   	val &= DBOFF_MASK;
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"// Doorbell array is located at offset 0x%x"
>> @@ -2392,7 +2392,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>   	}
>>   
>>   	/* set ERST count with the number of entries in the segment table */
>> -	val = xhci_readl(xhci, &xhci->ir_set->erst_size);
>> +	val = xhci_readl(&xhci->ir_set->erst_size);
>>   	val &= ERST_SIZE_MASK;
>>   	val |= ERST_NUM_SEGS;
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>> @@ -2439,7 +2439,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
>>   	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
>>   	 * U3 (device suspend).
>>   	 */
>> -	temp = xhci_readl(xhci, &xhci->op_regs->dev_notification);
>> +	temp = xhci_readl(&xhci->op_regs->dev_notification);
>>   	temp &= ~DEV_NOTE_MASK;
>>   	temp |= DEV_NOTE_FWAKE;
>>   	xhci_writel(xhci, temp, &xhci->op_regs->dev_notification);
>> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
>> index 411da1f..32da035 100644
>> --- a/drivers/usb/host/xhci-ring.c
>> +++ b/drivers/usb/host/xhci-ring.c
>> @@ -287,7 +287,7 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
>>   	xhci_dbg(xhci, "// Ding dong!\n");
>>   	xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
>>   	/* Flush PCI posted writes */
>> -	xhci_readl(xhci, &xhci->dba->doorbell[0]);
>> +	xhci_readl(&xhci->dba->doorbell[0]);
>>   }
>>   
>>   static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
>> @@ -1675,7 +1675,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
>>   	faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
>>   			port_id);
>>   
>> -	temp = xhci_readl(xhci, port_array[faked_port_index]);
>> +	temp = xhci_readl(port_array[faked_port_index]);
>>   	if (hcd->state == HC_STATE_SUSPENDED) {
>>   		xhci_dbg(xhci, "resume root hub\n");
>>   		usb_hcd_resume_root_hub(hcd);
>> @@ -1684,7 +1684,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
>>   	if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
>>   		xhci_dbg(xhci, "port resume event for port %d\n", port_id);
>>   
>> -		temp1 = xhci_readl(xhci, &xhci->op_regs->command);
>> +		temp1 = xhci_readl(&xhci->op_regs->command);
>>   		if (!(temp1 & CMD_RUN)) {
>>   			xhci_warn(xhci, "xHC is not running.\n");
>>   			goto cleanup;
>> @@ -2754,7 +2754,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
>>   
>>   	spin_lock(&xhci->lock);
>>   	/* Check if the xHC generated the interrupt, or the irq is shared */
>> -	status = xhci_readl(xhci, &xhci->op_regs->status);
>> +	status = xhci_readl(&xhci->op_regs->status);
>>   	if (status == 0xffffffff)
>>   		goto hw_died;
>>   
>> @@ -2783,7 +2783,7 @@ hw_died:
>>   	if (hcd->irq) {
>>   		u32 irq_pending;
>>   		/* Acknowledge the PCI interrupt */
>> -		irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>> +		irq_pending = xhci_readl(&xhci->ir_set->irq_pending);
>>   		irq_pending |= IMAN_IP;
>>   		xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
>>   	}
>> @@ -3854,7 +3854,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
>>   	if (ret)
>>   		return ret;
>>   
>> -	start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
>> +	start_frame = xhci_readl(&xhci->run_regs->microframe_index);
>>   	start_frame &= 0x3fff;
>>   
>>   	urb->start_frame = start_frame;
>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
>> index 49b6edb..8da2fd5 100644
>> --- a/drivers/usb/host/xhci.c
>> +++ b/drivers/usb/host/xhci.c
>> @@ -60,7 +60,7 @@ int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
>>   	u32	result;
>>   
>>   	do {
>> -		result = xhci_readl(xhci, ptr);
>> +		result = xhci_readl(ptr);
>>   		if (result == ~(u32)0)		/* card removed */
>>   			return -ENODEV;
>>   		result &= mask;
>> @@ -82,11 +82,11 @@ void xhci_quiesce(struct xhci_hcd *xhci)
>>   	u32 mask;
>>   
>>   	mask = ~(XHCI_IRQS);
>> -	halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
>> +	halted = xhci_readl(&xhci->op_regs->status) & STS_HALT;
>>   	if (!halted)
>>   		mask &= ~CMD_RUN;
>>   
>> -	cmd = xhci_readl(xhci, &xhci->op_regs->command);
>> +	cmd = xhci_readl(&xhci->op_regs->command);
>>   	cmd &= mask;
>>   	xhci_writel(xhci, cmd, &xhci->op_regs->command);
>>   }
>> @@ -124,7 +124,7 @@ static int xhci_start(struct xhci_hcd *xhci)
>>   	u32 temp;
>>   	int ret;
>>   
>> -	temp = xhci_readl(xhci, &xhci->op_regs->command);
>> +	temp = xhci_readl(&xhci->op_regs->command);
>>   	temp |= (CMD_RUN);
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
>>   			temp);
>> @@ -158,14 +158,14 @@ int xhci_reset(struct xhci_hcd *xhci)
>>   	u32 state;
>>   	int ret, i;
>>   
>> -	state = xhci_readl(xhci, &xhci->op_regs->status);
>> +	state = xhci_readl(&xhci->op_regs->status);
>>   	if ((state & STS_HALT) == 0) {
>>   		xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
>>   		return 0;
>>   	}
>>   
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC");
>> -	command = xhci_readl(xhci, &xhci->op_regs->command);
>> +	command = xhci_readl(&xhci->op_regs->command);
>>   	command |= CMD_RESET;
>>   	xhci_writel(xhci, command, &xhci->op_regs->command);
>>   
>> @@ -422,7 +422,7 @@ static void compliance_mode_recovery(unsigned long arg)
>>   	xhci = (struct xhci_hcd *)arg;
>>   
>>   	for (i = 0; i < xhci->num_usb3_ports; i++) {
>> -		temp = xhci_readl(xhci, xhci->usb3_ports[i]);
>> +		temp = xhci_readl(xhci->usb3_ports[i]);
>>   		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
>>   			/*
>>   			 * Compliance Mode Detected. Letting USB Core
>> @@ -611,19 +611,19 @@ int xhci_run(struct usb_hcd *hcd)
>>   
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"// Set the interrupt modulation register");
>> -	temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
>> +	temp = xhci_readl(&xhci->ir_set->irq_control);
>>   	temp &= ~ER_IRQ_INTERVAL_MASK;
>>   	temp |= (u32) 160;
>>   	xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
>>   
>>   	/* Set the HCD state before we enable the irqs */
>> -	temp = xhci_readl(xhci, &xhci->op_regs->command);
>> +	temp = xhci_readl(&xhci->op_regs->command);
>>   	temp |= (CMD_EIE);
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"// Enable interrupts, cmd = 0x%x.", temp);
>>   	xhci_writel(xhci, temp, &xhci->op_regs->command);
>>   
>> -	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>> +	temp = xhci_readl(&xhci->ir_set->irq_pending);
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"// Enabling event ring interrupter %p by writing 0x%x to irq_pending",
>>   			xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
>> @@ -698,9 +698,9 @@ void xhci_stop(struct usb_hcd *hcd)
>>   
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"// Disabling event ring interrupts");
>> -	temp = xhci_readl(xhci, &xhci->op_regs->status);
>> +	temp = xhci_readl(&xhci->op_regs->status);
>>   	xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
>> -	temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>> +	temp = xhci_readl(&xhci->ir_set->irq_pending);
>>   	xhci_writel(xhci, ER_IRQ_DISABLE(temp),
>>   			&xhci->ir_set->irq_pending);
>>   	xhci_print_ir_set(xhci, 0);
>> @@ -709,7 +709,7 @@ void xhci_stop(struct usb_hcd *hcd)
>>   	xhci_mem_cleanup(xhci);
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"xhci_stop completed - status = %x",
>> -			xhci_readl(xhci, &xhci->op_regs->status));
>> +			xhci_readl(&xhci->op_regs->status));
>>   }
>>   
>>   /*
>> @@ -736,21 +736,21 @@ void xhci_shutdown(struct usb_hcd *hcd)
>>   
>>   	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
>>   			"xhci_shutdown completed - status = %x",
>> -			xhci_readl(xhci, &xhci->op_regs->status));
>> +			xhci_readl(&xhci->op_regs->status));
>>   }
>>   
>>   #ifdef CONFIG_PM
>>   static void xhci_save_registers(struct xhci_hcd *xhci)
>>   {
>> -	xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command);
>> -	xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
>> +	xhci->s3.command = xhci_readl(&xhci->op_regs->command);
>> +	xhci->s3.dev_nt = xhci_readl(&xhci->op_regs->dev_notification);
>>   	xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
>> -	xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
>> -	xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
>> +	xhci->s3.config_reg = xhci_readl(&xhci->op_regs->config_reg);
>> +	xhci->s3.erst_size = xhci_readl(&xhci->ir_set->erst_size);
>>   	xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
>>   	xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
>> -	xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>> -	xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
>> +	xhci->s3.irq_pending = xhci_readl(&xhci->ir_set->irq_pending);
>> +	xhci->s3.irq_control = xhci_readl(&xhci->ir_set->irq_control);
>>   }
>>   
>>   static void xhci_restore_registers(struct xhci_hcd *xhci)
>> @@ -858,7 +858,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
>>   	/* skipped assuming that port suspend has done */
>>   
>>   	/* step 2: clear Run/Stop bit */
>> -	command = xhci_readl(xhci, &xhci->op_regs->command);
>> +	command = xhci_readl(&xhci->op_regs->command);
>>   	command &= ~CMD_RUN;
>>   	xhci_writel(xhci, command, &xhci->op_regs->command);
>>   	if (xhci_handshake(xhci, &xhci->op_regs->status,
>> @@ -873,7 +873,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
>>   	xhci_save_registers(xhci);
>>   
>>   	/* step 4: set CSS flag */
>> -	command = xhci_readl(xhci, &xhci->op_regs->command);
>> +	command = xhci_readl(&xhci->op_regs->command);
>>   	command |= CMD_CSS;
>>   	xhci_writel(xhci, command, &xhci->op_regs->command);
>>   	if (xhci_handshake(xhci, &xhci->op_regs->status,
>> @@ -939,7 +939,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>   		xhci_set_cmd_ring_deq(xhci);
>>   		/* step 3: restore state and start state*/
>>   		/* step 3: set CRS flag */
>> -		command = xhci_readl(xhci, &xhci->op_regs->command);
>> +		command = xhci_readl(&xhci->op_regs->command);
>>   		command |= CMD_CRS;
>>   		xhci_writel(xhci, command, &xhci->op_regs->command);
>>   		if (xhci_handshake(xhci, &xhci->op_regs->status,
>> @@ -948,7 +948,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>   			spin_unlock_irq(&xhci->lock);
>>   			return -ETIMEDOUT;
>>   		}
>> -		temp = xhci_readl(xhci, &xhci->op_regs->status);
>> +		temp = xhci_readl(&xhci->op_regs->status);
>>   	}
>>   
>>   	/* If restore operation fails, re-initialize the HC during resume */
>> @@ -972,9 +972,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>   		xhci_cleanup_msix(xhci);
>>   
>>   		xhci_dbg(xhci, "// Disabling event ring interrupts\n");
>> -		temp = xhci_readl(xhci, &xhci->op_regs->status);
>> +		temp = xhci_readl(&xhci->op_regs->status);
>>   		xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
>> -		temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
>> +		temp = xhci_readl(&xhci->ir_set->irq_pending);
>>   		xhci_writel(xhci, ER_IRQ_DISABLE(temp),
>>   				&xhci->ir_set->irq_pending);
>>   		xhci_print_ir_set(xhci, 0);
>> @@ -982,7 +982,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>   		xhci_dbg(xhci, "cleaning up memory\n");
>>   		xhci_mem_cleanup(xhci);
>>   		xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
>> -			    xhci_readl(xhci, &xhci->op_regs->status));
>> +			    xhci_readl(&xhci->op_regs->status));
>>   
>>   		/* USB core calls the PCI reinit and start functions twice:
>>   		 * first with the primary HCD, and then with the secondary HCD.
>> @@ -1011,7 +1011,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>   	}
>>   
>>   	/* step 4: set Run/Stop bit */
>> -	command = xhci_readl(xhci, &xhci->op_regs->command);
>> +	command = xhci_readl(&xhci->op_regs->command);
>>   	command |= CMD_RUN;
>>   	xhci_writel(xhci, command, &xhci->op_regs->command);
>>   	xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
>> @@ -1452,7 +1452,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
>>   	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
>>   	if (ret || !urb->hcpriv)
>>   		goto done;
>> -	temp = xhci_readl(xhci, &xhci->op_regs->status);
>> +	temp = xhci_readl(&xhci->op_regs->status);
>>   	if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
>>   		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
>>   				"HW died, freeing TD.");
>> @@ -3593,7 +3593,7 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
>>   
>>   	spin_lock_irqsave(&xhci->lock, flags);
>>   	/* Don't disable the slot if the host controller is dead. */
>> -	state = xhci_readl(xhci, &xhci->op_regs->status);
>> +	state = xhci_readl(&xhci->op_regs->status);
>>   	if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
>>   			(xhci->xhc_state & XHCI_STATE_HALTED)) {
>>   		xhci_free_virt_device(xhci, udev->slot_id);
>> @@ -4102,12 +4102,12 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
>>   			PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
>>   	if (ret != -ETIMEDOUT) {
>>   		/* enter L1 successfully */
>> -		temp = xhci_readl(xhci, addr);
>> +		temp = xhci_readl(addr);
>>   		xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n",
>>   				port_num, temp);
>>   		ret = 0;
>>   	} else {
>> -		temp = xhci_readl(xhci, pm_addr);
>> +		temp = xhci_readl(pm_addr);
>>   		xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n",
>>   				port_num, temp & PORT_L1S_MASK);
>>   		ret = -EINVAL;
>> @@ -4125,7 +4125,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
>>   
>>   	/* Check PORTSC to make sure the device is in the right state */
>>   	if (!ret) {
>> -		temp = xhci_readl(xhci, addr);
>> +		temp = xhci_readl(addr);
>>   		xhci_dbg(xhci, "resumed port %d status 0x%x\n",	port_num, temp);
>>   		if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) ||
>>   				(temp & PORT_PLS_MASK) != XDEV_U0) {
>> @@ -4183,7 +4183,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
>>   	port_array = xhci->usb2_ports;
>>   	port_num = udev->portnum - 1;
>>   	pm_addr = port_array[port_num] + PORTPMSC;
>> -	pm_val = xhci_readl(xhci, pm_addr);
>> +	pm_val = xhci_readl(pm_addr);
>>   	hlpm_addr = port_array[port_num] + PORTHLPMC;
>>   	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
>>   
>> @@ -4225,7 +4225,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
>>   			hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
>>   			xhci_writel(xhci, hlpm_val, hlpm_addr);
>>   			/* flush write */
>> -			xhci_readl(xhci, hlpm_addr);
>> +			xhci_readl(hlpm_addr);
>>   		} else {
>>   			hird = xhci_calculate_hird_besl(xhci, udev);
>>   		}
>> @@ -4233,16 +4233,16 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
>>   		pm_val &= ~PORT_HIRD_MASK;
>>   		pm_val |= PORT_HIRD(hird) | PORT_RWE;
>>   		xhci_writel(xhci, pm_val, pm_addr);
>> -		pm_val = xhci_readl(xhci, pm_addr);
>> +		pm_val = xhci_readl(pm_addr);
>>   		pm_val |= PORT_HLE;
>>   		xhci_writel(xhci, pm_val, pm_addr);
>>   		/* flush write */
>> -		xhci_readl(xhci, pm_addr);
>> +		xhci_readl(pm_addr);
>>   	} else {
>>   		pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
>>   		xhci_writel(xhci, pm_val, pm_addr);
>>   		/* flush write */
>> -		xhci_readl(xhci, pm_addr);
>> +		xhci_readl(pm_addr);
>>   		if (udev->usb2_hw_lpm_besl_capable) {
>>   			spin_unlock_irqrestore(&xhci->lock, flags);
>>   			mutex_lock(hcd->bandwidth_mutex);
>> @@ -4843,7 +4843,7 @@ int xhci_get_frame(struct usb_hcd *hcd)
>>   {
>>   	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>>   	/* EHCI mods by the periodic size.  Why? */
>> -	return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
>> +	return xhci_readl(&xhci->run_regs->microframe_index) >> 3;
>>   }
>>   
>>   int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
>> @@ -4887,16 +4887,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
>>   
>>   	xhci->cap_regs = hcd->regs;
>>   	xhci->op_regs = hcd->regs +
>> -		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
>> +		HC_LENGTH(xhci_readl(&xhci->cap_regs->hc_capbase));
>>   	xhci->run_regs = hcd->regs +
>> -		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
>> +		(xhci_readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
>>   	/* Cache read-only capability registers */
>> -	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
>> -	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
>> -	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
>> -	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
>> +	xhci->hcs_params1 = xhci_readl(&xhci->cap_regs->hcs_params1);
>> +	xhci->hcs_params2 = xhci_readl(&xhci->cap_regs->hcs_params2);
>> +	xhci->hcs_params3 = xhci_readl(&xhci->cap_regs->hcs_params3);
>> +	xhci->hcc_params = xhci_readl(&xhci->cap_regs->hc_capbase);
>>   	xhci->hci_version = HC_VERSION(xhci->hcc_params);
>> -	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
>> +	xhci->hcc_params = xhci_readl(&xhci->cap_regs->hcc_params);
>>   	xhci_print_registers(xhci);
>>   
>>   	get_quirks(dev, xhci);
>> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
>> index 46aa148..3acb044 100644
>> --- a/drivers/usb/host/xhci.h
>> +++ b/drivers/usb/host/xhci.h
>> @@ -1586,8 +1586,7 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
>>   
>>   /* TODO: copied from ehci.h - can be refactored? */
>>   /* xHCI spec says all registers are little endian */
>> -static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
>> -		__le32 __iomem *regs)
>> +static inline unsigned int xhci_readl(__le32 __iomem *regs)
>>   {
>>   	return readl(regs);
>>   }
>> -- 
>> 1.7.9.5
>>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ