lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130904141710.GD8726@dhcp-26-207.brq.redhat.com>
Date:	Wed, 4 Sep 2013 16:17:11 +0200
From:	Alexander Gordeev <agordeev@...hat.com>
To:	Tejun Heo <tj@...nel.org>
Cc:	linux-kernel@...r.kernel.org, x86@...nel.org,
	linux-pci@...r.kernel.org, linux-ide@...r.kernel.org,
	Ingo Molnar <mingo@...nel.org>, Joerg Roedel <joro@...tes.org>,
	Jan Beulich <JBeulich@...e.com>,
	Bjorn Helgaas <bhelgaas@...gle.com>
Subject: [PATCH v2 3/4] AHCI: Conserve interrupts with
 pci_enable_msi_block_part() interface

Make use of the new pci_enable_msi_block_part() interface
and conserve on othewise wasted interrupt resources for 10
of 16 unused MSI vectors on Intel chipsets.
    
Signed-off-by: Alexander Gordeev <agordeev@...hat.com>

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index db4380d..41f9c08 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1091,26 +1091,39 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 {}
 #endif
 
-int ahci_init_interrupts(struct pci_dev *pdev, struct ahci_host_priv *hpriv)
+static int ahci_get_mrsm(struct ahci_host_priv *hpriv)
+{
+	void __iomem *mmio = hpriv->mmio;
+	u32 ctl = readl(mmio + HOST_CTL);
+
+	return (ctl & HOST_MRSM);
+}
+
+int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
+			 struct ahci_host_priv *hpriv)
 {
 	int rc;
-	unsigned int maxvec;
+	unsigned int n_msis;
 
-	if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) {
-		rc = pci_enable_msi_block_auto(pdev, &maxvec);
-		if (rc > 0) {
-			if ((rc == maxvec) || (rc == 1))
-				return rc;
-			/*
-			 * Assume that advantage of multipe MSIs is negated,
-			 * so fallback to single MSI mode to save resources
-			 */
-			pci_disable_msi(pdev);
-			if (!pci_enable_msi(pdev))
-				return 1;
-		}
+	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
+		goto intx;
+
+	for (n_msis = roundup_pow_of_two(n_ports);
+	     n_msis <= AHCI_MAX_PORTS; n_msis *= 2) {
+		rc = pci_enable_msi_block_part(pdev, n_ports, n_msis);
+		if (rc < 0)
+			goto intx;
+		if (rc)
+			break;
+		if (!ahci_get_mrsm(hpriv))
+			return n_msis;
+		pci_disable_msi(pdev);
 	}
 
+	if (!pci_enable_msi(pdev))
+		return 1;
+
+intx:
 	pci_intx(pdev, 1);
 	return 0;
 }
@@ -1277,10 +1290,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar];
 
-	n_msis = ahci_init_interrupts(pdev, hpriv);
-	if (n_msis > 1)
-		hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
-
 	/* save initial config */
 	ahci_pci_save_initial_config(pdev, hpriv);
 
@@ -1327,6 +1336,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
 
+	n_msis = ahci_init_interrupts(pdev, n_ports, hpriv);
+	if (n_msis > 1)
+		hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
+
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	if (!host)
 		return -ENOMEM;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 1145637..19bc846 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -91,6 +91,7 @@ enum {
 	/* HOST_CTL bits */
 	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
 	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
+	HOST_MRSM		= (1 << 2),  /* MSI Revert to Single Message */
 	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
 
 	/* HOST_CAP bits */

-- 
Regards,
Alexander Gordeev
agordeev@...hat.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ