| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <002201cea9e1$5e99da40$1bcd8ec0$%han@samsung.com>
Date: Thu, 05 Sep 2013 11:41:05 +0900
From: Jingoo Han <jg1.han@...sung.com>
To: 'Andrew Morton' <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, 'Richard Purdie' <rpurdie@...ys.net>,
'Milo Kim' <milo.kim@...com>,
'Daniel Jeong' <gshark.jeong@...il.com>,
'Jingoo Han' <jg1.han@...sung.com>
Subject: [PATCH 1/6] backlight: lp855x_bl: support new LP8555 device
LP8555 is one of LP855x family device.
This device needs pre_init_device() and post_init_device() driver structure.
It's same as LP8557, so the device configuration code is shared with LP8557.
Backlight outputs are generated from dual DC-DC boost converters.
It's configurable EPROM settings which are defined in the platform data.
Driver documentation and device tree bindings are updated.
Signed-off-by: Milo Kim <milo.kim@...com>
---
Documentation/backlight/lp855x-driver.txt | 5 ++--
.../devicetree/bindings/video/backlight/lp855x.txt | 29 +++++++++++++++++++-
drivers/video/backlight/Kconfig | 4 +--
drivers/video/backlight/lp855x_bl.c | 17 ++++++++++--
include/linux/platform_data/lp855x.h | 19 +++++++++++++
5 files changed, 67 insertions(+), 7 deletions(-)
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
index 1c732f0..01bce24 100644
--- a/Documentation/backlight/lp855x-driver.txt
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -4,7 +4,8 @@ Kernel driver lp855x
Backlight driver for LP855x ICs
Supported chips:
- Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
+ Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+ LP8557
Author: Milo(Woogyom) Kim <milo.kim@...com>
@@ -24,7 +25,7 @@ Value : pwm based or register based
2) chip_id
The lp855x chip id.
-Value : lp8550/lp8551/lp8552/lp8553/lp8556/lp8557
+Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
Platform data for lp855x
------------------------
diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
index 1482103..96e83a5 100644
--- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
@@ -2,7 +2,7 @@ lp855x bindings
Required properties:
- compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
- "ti,lp8556", "ti,lp8557"
+ "ti,lp8555", "ti,lp8556", "ti,lp8557"
- reg: I2C slave address (u8)
- dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
@@ -15,6 +15,33 @@ Optional properties:
Example:
+ /* LP8555 */
+ backlight@2c {
+ compatible = "ti,lp8555";
+ reg = <0x2c>;
+
+ dev-ctrl = /bits/ 8 <0x00>;
+ pwm-period = <10000>;
+
+ /* 4V OV, 4 output LED0 string enabled */
+ rom_14h {
+ rom-addr = /bits/ 8 <0x14>;
+ rom-val = /bits/ 8 <0xcf>;
+ };
+
+ /* Heavy smoothing, 24ms ramp time step */
+ rom_15h {
+ rom-addr = /bits/ 8 <0x15>;
+ rom-val = /bits/ 8 <0xc7>;
+ };
+
+ /* 4 output LED1 string enabled */
+ rom_19h {
+ rom-addr = /bits/ 8 <0x19>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ };
+
/* LP8556 */
backlight@2c {
compatible = "ti,lp8556";
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index d4a7a35..a65dd06 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -388,8 +388,8 @@ config BACKLIGHT_LP855X
tristate "Backlight driver for TI LP855X"
depends on BACKLIGHT_CLASS_DEVICE && I2C
help
- This supports TI LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
- backlight driver.
+ This supports TI LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+ LP8557 backlight driver.
config BACKLIGHT_LP8788
tristate "Backlight driver for TI LP8788 MFD"
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index c0b41f1..c952175 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -26,13 +26,15 @@
#define LP8556_EPROM_START 0xA0
#define LP8556_EPROM_END 0xAF
-/* LP8557 Registers */
+/* LP8555/7 Registers */
#define LP8557_BL_CMD 0x00
#define LP8557_BL_MASK 0x01
#define LP8557_BL_ON 0x01
#define LP8557_BL_OFF 0x00
#define LP8557_BRIGHTNESS_CTRL 0x04
#define LP8557_CONFIG 0x10
+#define LP8555_EPROM_START 0x10
+#define LP8555_EPROM_END 0x7A
#define LP8557_EPROM_START 0x10
#define LP8557_EPROM_END 0x1E
@@ -111,6 +113,10 @@ static bool lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
start = LP8556_EPROM_START;
end = LP8556_EPROM_END;
break;
+ case LP8555:
+ start = LP8555_EPROM_START;
+ end = LP8555_EPROM_END;
+ break;
case LP8557:
start = LP8557_EPROM_START;
end = LP8557_EPROM_END;
@@ -165,9 +171,14 @@ static int lp855x_configure(struct lp855x *lp)
struct lp855x_platform_data *pd = lp->pdata;
switch (lp->chip_id) {
- case LP8550 ... LP8556:
+ case LP8550:
+ case LP8551:
+ case LP8552:
+ case LP8553:
+ case LP8556:
lp->cfg = &lp855x_dev_cfg;
break;
+ case LP8555:
case LP8557:
lp->cfg = &lp8557_dev_cfg;
break;
@@ -470,6 +481,7 @@ static const struct of_device_id lp855x_dt_ids[] = {
{ .compatible = "ti,lp8551", },
{ .compatible = "ti,lp8552", },
{ .compatible = "ti,lp8553", },
+ { .compatible = "ti,lp8555", },
{ .compatible = "ti,lp8556", },
{ .compatible = "ti,lp8557", },
{ }
@@ -481,6 +493,7 @@ static const struct i2c_device_id lp855x_ids[] = {
{"lp8551", LP8551},
{"lp8552", LP8552},
{"lp8553", LP8553},
+ {"lp8555", LP8555},
{"lp8556", LP8556},
{"lp8557", LP8557},
{ }
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index ea32005..1b2ba24 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -40,6 +40,17 @@
#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG
#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG
+/* CONFIG register - LP8555 */
+#define LP8555_PWM_STANDBY BIT(7)
+#define LP8555_PWM_FILTER BIT(6)
+#define LP8555_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset
+ when the backlight turns on */
+#define LP8555_OFF_OPENLEDS BIT(2)
+#define LP8555_PWM_CONFIG LP8555_PWM_ONLY
+#define LP8555_I2C_CONFIG LP8555_I2C_ONLY
+#define LP8555_COMB1_CONFIG LP8555_COMBINED1
+#define LP8555_COMB2_CONFIG LP8555_COMBINED2
+
/* DEVICE CONTROL register - LP8556 */
#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT)
#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT)
@@ -65,6 +76,7 @@ enum lp855x_chip_id {
LP8551,
LP8552,
LP8553,
+ LP8555,
LP8556,
LP8557,
};
@@ -89,6 +101,13 @@ enum lp8553_brighntess_source {
LP8553_I2C_ONLY = LP8550_I2C_ONLY,
};
+enum lp8555_brightness_source {
+ LP8555_PWM_ONLY,
+ LP8555_I2C_ONLY,
+ LP8555_COMBINED1, /* Brightness register with shaped PWM */
+ LP8555_COMBINED2, /* PWM with shaped brightness register */
+};
+
enum lp8556_brightness_source {
LP8556_PWM_ONLY,
LP8556_COMBINED1, /* pwm + i2c before the shaper block */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists