[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130911021618.GA2657@roeck-us.net>
Date: Tue, 10 Sep 2013 19:16:18 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: linux-kernel@...r.kernel.org
Cc: MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCH v2 2/6] extcon-gpio: Use gpio driver/chip debounce if
supported
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
---
v2: rephrase patch subject
call gpio_set_debounce before registering extcon device,
and set debounce_jiffies only if the call was not successful
drivers/extcon/extcon-gpio.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 77d35a7..e5a4405 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -100,7 +100,13 @@ static int gpio_extcon_probe(struct platform_device *pdev)
extcon_data->state_off = pdata->state_off;
if (pdata->state_on && pdata->state_off)
extcon_data->edev.print_state = extcon_gpio_print_state;
- extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
+ if (pdata->debounce) {
+ ret = gpio_set_debounce(extcon_data->gpio,
+ pdata->debounce * 1000);
+ if (ret < 0)
+ extcon_data->debounce_jiffies =
+ msecs_to_jiffies(pdata->debounce);
+ }
ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
if (ret < 0)
--
1.7.9.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists