linux-kernel - [RFC PATCH 0/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 12 Sep 2013 21:09:07 +0530
From:	Sricharan R <r.sricharan@...com>
To:	<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-doc@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-omap@...r.kernel.org>
CC:	<tglx@...utronix.de>, <linus.walleij@...aro.org>,
	<santosh.shilimkar@...com>, <linux@....linux.org.uk>,
	<tony@...mide.com>, <rnayak@...com>, <r.sricharan@...com>
Subject: [RFC PATCH 0/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver

Some socs have a large number of interrupts requests to service
the needs of its many peripherals and subsystems. All of the interrupt
requests lines from the subsystems are not needed at the same
time, so they have to be muxed to the controllers appropriately.
In such places a interrupt controllers are preceded by an
IRQ CROSSBAR that provides flexibility in muxing the device interrupt
requests to the controller inputs.

This series models the crossbar IP as a cascaded irqchip controller.
The peripheral crossbar inputs are mapped on to the crossbar irq-domain.
The driver then allocates a 'free' irq line and maps that to the
actual interrupt controller's domain. So every external peripheral interrupt
is routed through the crossbar handler.

This series adds a crossbar driver and the DT bindings for the
same. Also the DT nodes for DRA7xx SOC which has a IRQ
crossbar has been added here.

Sricharan R (4):
  DRIVERS: IRQCHIP: Add crossbar irqchip driver
  ARM: DTS: DRA: Add crossbar device binding
  ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar
    inputs.
  ARM: DRA: Kconfig: Enable crossbar irqchip driver for DRA7xx

 .../devicetree/bindings/arm/omap/irq-crossbar.txt  |   39 ++
 arch/arm/boot/dts/dra7.dtsi                        |  104 ++---
 arch/arm/mach-omap2/Kconfig                        |    1 +
 drivers/irqchip/Kconfig                            |    9 +
 drivers/irqchip/Makefile                           |    1 +
 drivers/irqchip/irq-crossbar.c                     |  407 ++++++++++++++++++++
 6 files changed, 517 insertions(+), 44 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/omap/irq-crossbar.txt
 create mode 100644 drivers/irqchip/irq-crossbar.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/