lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <460ac80ae0afb99ba681bedcbd3863c0ddae0ea8.1379063063.git.viresh.kumar@linaro.org>
Date:	Fri, 13 Sep 2013 18:32:24 +0530
From:	Viresh Kumar <viresh.kumar@...aro.org>
To:	rjw@...k.pl
Cc:	linaro-kernel@...ts.linaro.org, patches@...aro.org,
	cpufreq@...r.kernel.org, linux-pm@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Viresh Kumar <viresh.kumar@...aro.org>,
	Santosh Shilimkar <santosh.shilimkar@...com>
Subject: [PATCH 198/228] cpufreq: omap: remove calls to cpufreq_notify_transition()

Most of the drivers do following in their ->target_index() routines:

	struct cpufreq_freqs freqs;
	freqs.old = old freq...
	freqs.new = new freq...

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

	/* Change rate here */

	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.

Earlier patches have added support in cpufreq core to do cpufreq notification on
frequency change, this one removes it from this driver.

Some related minor cleanups are also done along with it.

Cc: Santosh Shilimkar <santosh.shilimkar@...com>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
 drivers/cpufreq/omap-cpufreq.c | 39 ++++++++++++++-------------------------
 1 file changed, 14 insertions(+), 25 deletions(-)

diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 0653887..e92d72e 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -53,15 +53,15 @@ static unsigned int omap_getspeed(unsigned int cpu)
 
 static int omap_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	int r, ret = 0;
-	struct cpufreq_freqs freqs;
+	int r, ret;
 	struct opp *opp;
 	unsigned long freq, volt = 0, volt_old = 0, tol = 0;
+	unsigned int old_freq, new_freq;
 
-	freqs.old = omap_getspeed(policy->cpu);
-	freqs.new = freq_table[index].frequency;
+	old_freq = omap_getspeed(policy->cpu);
+	new_freq = freq_table[index].frequency;
 
-	freq = freqs.new * 1000;
+	freq = new_freq * 1000;
 	ret = clk_round_rate(mpu_clk, freq);
 	if (IS_ERR_VALUE(ret)) {
 		dev_warn(mpu_dev,
@@ -77,7 +77,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
-				__func__, freqs.new);
+				__func__, new_freq);
 			return -EINVAL;
 		}
 		volt = opp_get_voltage(opp);
@@ -87,43 +87,32 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
 	}
 
 	dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n", 
-		freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
-		freqs.new / 1000, volt ? volt / 1000 : -1);
-
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+		old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+		new_freq / 1000, volt ? volt / 1000 : -1);
 
 	/* scaling up?  scale voltage before frequency */
-	if (mpu_reg && (freqs.new > freqs.old)) {
+	if (mpu_reg && (new_freq > old_freq)) {
 		r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
 		if (r < 0) {
 			dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
 				 __func__);
-			freqs.new = freqs.old;
-			goto done;
+			return r;
 		}
 	}
 
-	ret = clk_set_rate(mpu_clk, freqs.new * 1000);
+	ret = clk_set_rate(mpu_clk, new_freq * 1000);
 
 	/* scaling down?  scale voltage after frequency */
-	if (mpu_reg && (freqs.new < freqs.old)) {
+	if (mpu_reg && (new_freq < old_freq)) {
 		r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
 		if (r < 0) {
 			dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
 				 __func__);
-			ret = clk_set_rate(mpu_clk, freqs.old * 1000);
-			freqs.new = freqs.old;
-			goto done;
+			clk_set_rate(mpu_clk, old_freq * 1000);
+			return r;
 		}
 	}
 
-	freqs.new = omap_getspeed(policy->cpu);
-
-done:
-	/* notifiers */
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
 	return ret;
 }
 
-- 
1.7.12.rc2.18.g61b472e

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ