| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1379503383-17086-3-git-send-email-zubair.lutfullah@gmail.com>
Date: Wed, 18 Sep 2013 16:23:03 +0500
From: Zubair Lutfullah <zubair.lutfullah@...il.com>
To: jic23@....ac.uk, dmitry.torokhov@...il.com
Cc: linux-iio@...r.kernel.org, linux-input@...r.kernel.org,
linux-kernel@...r.kernel.org, bigeasy@...utronix.de,
gregkh@...uxfoundation.org, zubair.lutfullah@...il.com
Subject: [PATCH 2/2] iio: ti_am335x_adc: Add continuous sampling support
Previously the driver had only one-shot reading functionality.
This patch adds continuous sampling support to the driver.
Continuous sampling starts when buffer is enabled.
HW IRQ wakes worker thread that pushes samples to userspace.
Sampling stops when buffer is disabled by userspace.
Patil Rachna (TI) laid the ground work for ADC HW register access.
Russ Dill (TI) fixed bugs in the driver relevant to FIFOs and IRQs.
I fixed channel scanning so multiple ADC channels can be read
simultaneously and pushed to userspace.
Restructured the driver to fit IIO ABI.
And added INDIO_BUFFER_HARDWARE mode.
Signed-off-by: Zubair Lutfullah <zubair.lutfullah@...il.com>
Acked-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Russ Dill <Russ.Dill@...com>
Acked-by: Lee Jones <lee.jones@...aro.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
---
drivers/iio/adc/ti_am335x_adc.c | 216 +++++++++++++++++++++++++++++++++-
include/linux/mfd/ti_am335x_tscadc.h | 9 ++
2 files changed, 220 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index a952538..b4b2ea0 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -28,12 +28,19 @@
#include <linux/iio/driver.h>
#include <linux/mfd/ti_am335x_tscadc.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
struct tiadc_device {
struct ti_tscadc_dev *mfd_tscadc;
int channels;
u8 channel_line[8];
u8 channel_step[8];
+ int buffer_en_ch_steps;
+ u32 *data;
};
static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
@@ -56,8 +63,14 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
return step_en;
}
-static void tiadc_step_config(struct tiadc_device *adc_dev)
+static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
{
+ return 1 << adc_dev->channel_step[chan];
+}
+
+static void tiadc_step_config(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
unsigned int stepconfig;
int i, steps;
@@ -72,7 +85,11 @@ static void tiadc_step_config(struct tiadc_device *adc_dev)
*/
steps = TOTAL_STEPS - adc_dev->channels;
- stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
+ if (iio_buffer_enabled(indio_dev))
+ stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
+ | STEPCONFIG_MODE_SWCNT;
+ else
+ stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
for (i = 0; i < adc_dev->channels; i++) {
int chan;
@@ -85,7 +102,177 @@ static void tiadc_step_config(struct tiadc_device *adc_dev)
adc_dev->channel_step[i] = steps;
steps++;
}
+}
+
+static irqreturn_t tiadc_irq_h(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ unsigned int status, config;
+ status = tiadc_readl(adc_dev, REG_IRQSTATUS);
+
+ /*
+ * ADC and touchscreen share the IRQ line.
+ * FIFO0 interrupts are used by TSC. Handle FIFO1 IRQs here only
+ */
+ if (status & IRQENB_FIFO1OVRRUN) {
+ /* FIFO Overrun. Clear flag. Disable/Enable ADC to recover */
+ config = tiadc_readl(adc_dev, REG_CTRL);
+ config &= ~(CNTRLREG_TSCSSENB);
+ tiadc_writel(adc_dev, REG_CTRL, config);
+ tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
+ | IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+ tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
+ return IRQ_HANDLED;
+ } else if (status & IRQENB_FIFO1THRES) {
+ /* Disable irq and wake worker thread */
+ tiadc_writel(adc_dev, REG_IRQCLR, IRQENB_FIFO1THRES);
+ return IRQ_WAKE_THREAD;
+ }
+
+ return IRQ_NONE;
+}
+
+static irqreturn_t tiadc_worker_h(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ int i, k, fifo1count, read;
+ u32 *data = adc_dev->data;
+
+ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+ for (k = 0; k < fifo1count; k = k + i) {
+ for (i = 0; i < (indio_dev->scan_bytes)/4; i++) {
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+ data[i] = read & FIFOREAD_DATA_MASK;
+ }
+ iio_push_to_buffers(indio_dev, (u8 *) data);
+ }
+ tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
+ tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
+
+ return IRQ_HANDLED;
+}
+
+static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ int i, fifo1count, read;
+
+ tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
+ IRQENB_FIFO1OVRRUN |
+ IRQENB_FIFO1UNDRFLW));
+
+ /* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
+ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+ for (i = 0; i < fifo1count; i++)
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+
+ return iio_sw_buffer_preenable(indio_dev);
+}
+
+static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ struct iio_buffer *buffer = indio_dev->buffer;
+ unsigned int enb = 0;
+ u8 bit;
+
+ adc_dev->data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (adc_dev->data == NULL)
+ return -ENOMEM;
+
+ tiadc_step_config(indio_dev);
+ for_each_set_bit(bit, buffer->scan_mask, adc_dev->channels)
+ enb |= (get_adc_step_bit(adc_dev, bit) << 1);
+ adc_dev->buffer_en_ch_steps = enb;
+
+ am335x_tsc_se_set(adc_dev->mfd_tscadc, enb);
+
+ tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES
+ | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
+ tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES
+ | IRQENB_FIFO1OVRRUN);
+
+ return 0;
+}
+
+static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ int fifo1count, i, read;
+
+ tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
+ IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+ am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
+
+ /* Flush FIFO of leftover data in the time it takes to disable adc */
+ fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+ for (i = 0; i < fifo1count; i++)
+ read = tiadc_readl(adc_dev, REG_FIFO1);
+
+ return 0;
+}
+
+static int tiadc_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct tiadc_device *adc_dev = iio_priv(indio_dev);
+
+ tiadc_step_config(indio_dev);
+ kfree(adc_dev->data);
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
+ .preenable = &tiadc_buffer_preenable,
+ .postenable = &tiadc_buffer_postenable,
+ .predisable = &tiadc_buffer_predisable,
+ .postdisable = &tiadc_buffer_postdisable,
+};
+
+int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
+ irqreturn_t (*pollfunc_bh)(int irq, void *p),
+ irqreturn_t (*pollfunc_th)(int irq, void *p),
+ int irq,
+ unsigned long flags,
+ const struct iio_buffer_setup_ops *setup_ops)
+{
+ int ret;
+
+ indio_dev->buffer = iio_kfifo_allocate(indio_dev);
+ if (!indio_dev->buffer)
+ return -ENOMEM;
+
+ ret = devm_request_threaded_irq(indio_dev->dev.parent,
+ irq,
+ pollfunc_th, pollfunc_bh,
+ flags, indio_dev->name,
+ indio_dev);
+ if (ret)
+ goto error_kfifo_free;
+
+ indio_dev->setup_ops = setup_ops;
+ indio_dev->modes |= INDIO_BUFFER_HARDWARE;
+
+ ret = iio_buffer_register(indio_dev,
+ indio_dev->channels,
+ indio_dev->num_channels);
+ if (ret)
+ goto error_kfifo_free;
+
+ return 0;
+
+error_kfifo_free:
+ iio_kfifo_free(indio_dev->buffer);
+ return ret;
+}
+
+static void tiadc_iio_buffered_hardware_remove(struct iio_dev *indio_dev)
+{
+ iio_kfifo_free(indio_dev->buffer);
+ iio_buffer_unregister(indio_dev);
}
static const char * const chan_name_ain[] = {
@@ -120,6 +307,7 @@ static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
chan->channel = adc_dev->channel_line[i];
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
chan->datasheet_name = chan_name_ain[chan->channel];
+ chan->scan_index = i;
chan->scan_type.sign = 'u';
chan->scan_type.realbits = 12;
chan->scan_type.storagebits = 32;
@@ -147,6 +335,10 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
u32 step_en;
unsigned long timeout = jiffies + usecs_to_jiffies
(IDLE_TIMEOUT * adc_dev->channels);
+
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
step_en = get_adc_step_mask(adc_dev);
am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
@@ -237,20 +429,33 @@ static int tiadc_probe(struct platform_device *pdev)
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &tiadc_info;
- tiadc_step_config(adc_dev);
+ tiadc_step_config(indio_dev);
+ tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
err = tiadc_channel_init(indio_dev, adc_dev->channels);
if (err < 0)
return err;
- err = iio_device_register(indio_dev);
+ err = tiadc_iio_buffered_hardware_setup(indio_dev,
+ &tiadc_worker_h,
+ &tiadc_irq_h,
+ adc_dev->mfd_tscadc->irq,
+ IRQF_SHARED,
+ &tiadc_buffer_setup_ops);
+
if (err)
goto err_free_channels;
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto err_buffer_unregister;
+
platform_set_drvdata(pdev, indio_dev);
return 0;
+err_buffer_unregister:
+ tiadc_iio_buffered_hardware_remove(indio_dev);
err_free_channels:
tiadc_channels_remove(indio_dev);
return err;
@@ -263,6 +468,7 @@ static int tiadc_remove(struct platform_device *pdev)
u32 step_en;
iio_device_unregister(indio_dev);
+ tiadc_iio_buffered_hardware_remove(indio_dev);
tiadc_channels_remove(indio_dev);
step_en = get_adc_step_mask(adc_dev);
@@ -301,7 +507,7 @@ static int tiadc_resume(struct device *dev)
restore &= ~(CNTRLREG_POWERDOWN);
tiadc_writel(adc_dev, REG_CTRL, restore);
- tiadc_step_config(adc_dev);
+ tiadc_step_config(indio_dev);
return 0;
}
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index db1791b..7d98562 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -46,16 +46,24 @@
/* Step Enable */
#define STEPENB_MASK (0x1FFFF << 0)
#define STEPENB(val) ((val) << 0)
+#define ENB(val) (1 << (val))
+#define STPENB_STEPENB STEPENB(0x1FFFF)
+#define STPENB_STEPENB_TC STEPENB(0x1FFF)
/* IRQ enable */
#define IRQENB_HW_PEN BIT(0)
#define IRQENB_FIFO0THRES BIT(2)
+#define IRQENB_FIFO0OVRRUN BIT(3)
+#define IRQENB_FIFO0UNDRFLW BIT(4)
#define IRQENB_FIFO1THRES BIT(5)
+#define IRQENB_FIFO1OVRRUN BIT(6)
+#define IRQENB_FIFO1UNDRFLW BIT(7)
#define IRQENB_PENUP BIT(9)
/* Step Configuration */
#define STEPCONFIG_MODE_MASK (3 << 0)
#define STEPCONFIG_MODE(val) ((val) << 0)
+#define STEPCONFIG_MODE_SWCNT STEPCONFIG_MODE(1)
#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2)
#define STEPCONFIG_AVG_MASK (7 << 2)
#define STEPCONFIG_AVG(val) ((val) << 2)
@@ -124,6 +132,7 @@
#define MAX_CLK_DIV 7
#define TOTAL_STEPS 16
#define TOTAL_CHANNELS 8
+#define FIFO1_THRESHOLD 19
/*
* ADC runs at 3MHz, and it takes
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists