| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFp+6iGGSqVtCK+NBGB1ZUy_8yUgfUzpS7_xG56Dfx25tkLOuw@mail.gmail.com>
Date: Fri, 20 Sep 2013 17:11:11 +0530
From: Vivek Gautam <gautamvivek1987@...il.com>
To: Kamil Debski <k.debski@...sung.com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Kyungmin Park <kyungmin.park@...sung.com>,
Kishon Vijay Abraham I <kishon@...com>,
Tomasz Figa <t.figa@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>
Subject: Re: [RFC] [PATCH] phy: Add new Exynos USB PHY driver
On Wed, Sep 11, 2013 at 4:57 PM, Kamil Debski <k.debski@...sung.com> wrote:
> Add a new driver for the Exynos USB PHY. The new driver uses the generic
> PHY framework.
>
> Signed-off-by: Kamil Debski <k.debski@...sung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
> Cc: Kishon Vijay Abraham I <kishon@...com>
> Cc: Tomasz Figa <t.figa@...sung.com>
> Cc: Sylwester Nawrocki <s.nawrocki@...sung.com>
> Cc: Marek Szyprowski <m.szyprowski@...sung.com>
> ---
>
> Hi,
>
> This patch adds a new drive for USB PHYs for Samsung SoCs. The driver is using
> the Generic PHY Framework created by Kishon Vijay Abrahan I. It can be found
> here https://lkml.org/lkml/2013/8/21/29.
> This patch adds support to Exynos4 family of SoCs. Support for Exynos3 and
> Exynos5 is planned to be added in the near future.
>
> I welcome your comments.
How do you plan to put support for exynos5 series. I can see you have
made separate files for exynos4210 and 4212.
Now for exynos5250 and above, we should be able to re-use some of the
functions like "4212_rate_to_clk()" and "4212_iso()".
Let me know if i can help with something for exynos5 stuff.
[...]
>
> Best wishes,
> Kamil Debski
>
> ---
> .../devicetree/bindings/phy/samsung-usbphy.txt | 48 +++
> drivers/phy/Kconfig | 23 ++
> drivers/phy/Makefile | 3 +
> drivers/phy/phy-exynos-usb.c | 245 ++++++++++++++
> drivers/phy/phy-exynos-usb.h | 95 ++++++
> drivers/phy/phy-exynos4210-usb.c | 315 ++++++++++++++++++
> drivers/phy/phy-exynos4212-usb.c | 349 ++++++++++++++++++++
> 7 files changed, 1078 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/samsung-usbphy.txt
> create mode 100644 drivers/phy/phy-exynos-usb.c
> create mode 100644 drivers/phy/phy-exynos-usb.h
> create mode 100644 drivers/phy/phy-exynos4210-usb.c
> create mode 100644 drivers/phy/phy-exynos4212-usb.c
>
> diff --git a/Documentation/devicetree/bindings/phy/samsung-usbphy.txt b/Documentation/devicetree/bindings/phy/samsung-usbphy.txt
> new file mode 100644
> index 0000000..f618e8d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/samsung-usbphy.txt
> @@ -0,0 +1,48 @@
> +Samsung S5P/EXYNOS SoC series USB PHY
> +-------------------------------------------------
> +
> +Required properties:
> +- compatible : should be one of the listed compatibles:
> + - "samsung,exynos4210-usbphy"
> + - "samsung,exynos4212-usbphy"
> +- reg : a list of registers used by phy driver
> + - first and obligatory is the location of phy modules registers
> + - second and also required is the location of isolation registers
> + (isolation registers control the physical connection between the in
> + SoC modules and outside of the SoC, this also can be called enable
> + control in the documentation of the SoC)
> + - third is the location of the mode switch register, this only applies
> + to SoCs that have such a feature; mode switching enables to have
> + both host and device used the same SoC pins and is commonly used
> + when OTG is supported
> +- #phy-cells : from the generic phy bindings, must be 1;
> +
> +The second cell in the PHY specifier identifies the PHY its meaning is SoC
> +dependent. For the currently supported SoCs (Exynos 4210 and Exynos 4212) it
> +is as follows:
> + 0 - USB device,
> + 1 - USB host,
> + 2 - HSIC0,
> + 3 - HSIC1,
> +
> +Example:
> +
> +For Exynos 4412 (compatible with Exynos 4212):
> +
> +exynos_usbphy: exynos-usbphy@...B0000 {
> + compatible = "samsung,exynos4212-usbphy";
> + reg = <0x125B0000 0x100>, <0x10020704 0x0c>, <0x1001021c 0x4>;
> + clocks = <&clock 305>, <&clock 2>, <&clock 2>, <&clock 2>,
> + <&clock 2>;
> + clock-names = "phy", "device", "host", "hsic0", "hsic1";
> + status = "okay";
> + #phy-cells = <1>;
> +};
> +
> +Then the PHY can be used in other nodes such as:
> +
> +ehci@...80000 {
> + status = "okay";
> + phys = <&exynos_usbphy 2>;
> + phy-names = "hsic0";
> +};
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 108c5f6..af3c422 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -21,4 +21,27 @@ config PHY_EXYNOS_MIPI_VIDEO
> Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung
> S5P and EXYNOS SoCs.
>
> +config PHY_EXYNOS_USB
> + tristate "Samsung USB PHY driver (using the Generic PHY Framework)"
> + help
> + Samsung USB PHY driver
> +
> + Enable this to support Samsung USB phy helper driver for Samsung SoCs.
> + This driver provides common interface to interact, for Samsung
> + USB 2.0 PHY driver.
> +
> +config PHY_EXYNOS4210_USB
> + bool "Support for Exynos 4210"
> + depends on PHY_EXYNOS_USB
> + depends on CPU_EXYNOS4210
> + help
> + Enable USB PHY support for Exynos 4210
> +
> +config PHY_EXYNOS4212_USB
> + bool "Support for Exynos 4212"
> + depends on PHY_EXYNOS_USB
> + depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> + help
> + Enable USB PHY support for Exynos 4212
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 71d8841..d75f932 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -4,3 +4,6 @@
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> +obj-$(CONFIG_PHY_EXYNOS_USB) += phy-exynos-usb.o
> +obj-$(CONFIG_PHY_EXYNOS4210_USB) += phy-exynos4210-usb.o
> +obj-$(CONFIG_PHY_EXYNOS4212_USB) += phy-exynos4212-usb.o
> diff --git a/drivers/phy/phy-exynos-usb.c b/drivers/phy/phy-exynos-usb.c
> new file mode 100644
> index 0000000..b15a19f
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-usb.c
> @@ -0,0 +1,245 @@
> +/*
> + * Samsung S5P/EXYNOS SoC series USB PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Kamil Debski <k.debski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include "phy-exynos-usb.h"
> +
> +static int exynos_uphy_power_on(struct phy *phy)
> +{
> + struct uphy_instance *inst = phy_get_drvdata(phy);
> + struct uphy_driver *drv = inst->drv;
> + int ret;
> +
> + dev_info(drv->dev, "Request to power_on \"%s\" usb phy\n",
> + inst->cfg->label);
> + ret = clk_prepare_enable(drv->clk);
> + if (ret)
> + return ret;
> + if (inst->cfg->power_on) {
> + spin_lock(&drv->lock);
> + ret = inst->cfg->power_on(inst);
> + spin_unlock(&drv->lock);
> + }
> + clk_disable_unprepare(drv->clk);
> + return ret;
> +}
> +
> +static int exynos_uphy_power_off(struct phy *phy)
> +{
> + struct uphy_instance *inst = phy_get_drvdata(phy);
> + struct uphy_driver *drv = inst->drv;
> + int ret;
> +
> + dev_info(drv->dev, "Request to power_off \"%s\" usb phy\n",
> + inst->cfg->label);
> + ret = clk_prepare_enable(drv->clk);
> + if (ret)
> + return ret;
> + if (inst->cfg->power_off) {
> + spin_lock(&drv->lock);
> + ret = inst->cfg->power_off(inst);
> + spin_unlock(&drv->lock);
> + }
> + clk_disable_unprepare(drv->clk);
> + return ret;
> +}
> +
> +static struct phy_ops exynos_uphy_ops = {
> + .power_on = exynos_uphy_power_on,
> + .power_off = exynos_uphy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct phy *exynos_uphy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct uphy_driver *drv;
> +
> + drv = dev_get_drvdata(dev);
> + if (!drv)
> + return ERR_PTR(-EINVAL);
> +
> + if (WARN_ON(args->args[0] >= drv->cfg->num_phys))
> + return ERR_PTR(-ENODEV);
> +
> + return drv->uphy_instances[args->args[0]].phy;
> +}
> +
> +static const struct of_device_id exynos_uphy_of_match[];
> +
> +static int exynos_uphy_probe(struct platform_device *pdev)
> +{
> + struct uphy_driver *drv;
> + struct device *dev = &pdev->dev;
> + struct resource *mem;
> + struct phy_provider *phy_provider;
> +
> + const struct of_device_id *match;
> + const struct uphy_config *cfg;
> + struct clk *clk;
> +
> + int i;
> +
> + match = of_match_node(exynos_uphy_of_match, pdev->dev.of_node);
> + if (!match) {
> + dev_err(dev, "of_match_node() failed\n");
> + return -EINVAL;
> + }
> + cfg = match->data;
> + if (!cfg) {
> + dev_err(dev, "Failed to get configuration\n");
> + return -EINVAL;
> + }
> +
> + drv = devm_kzalloc(dev, sizeof(struct uphy_driver) +
> + cfg->num_phys * sizeof(struct uphy_instance), GFP_KERNEL);
> +
> + if (!drv) {
> + dev_err(dev, "Failed to allocate memory\n");
> + return -ENOMEM;
> + }
> +
> + dev_set_drvdata(dev, drv);
> + spin_lock_init(&drv->lock);
> +
> + drv->cfg = cfg;
> + drv->dev = dev;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + drv->reg_phy = devm_ioremap_resource(dev, mem);
> + if (IS_ERR(drv->reg_phy)) {
> + dev_err(dev, "Failed to map register memory (phy)\n");
> + return PTR_ERR(drv->reg_phy);
> + }
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + drv->reg_isol = devm_ioremap_resource(dev, mem);
> + if (IS_ERR(drv->reg_isol)) {
> + dev_err(dev, "Failed to map register memory (isolation)\n");
> + return PTR_ERR(drv->reg_isol);
> + }
> +
> + switch (drv->cfg->cpu) {
> + case TYPE_EXYNOS4210:
> + case TYPE_EXYNOS4212:
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> + drv->reg_mode = devm_ioremap_resource(dev, mem);
> + if (IS_ERR(drv->reg_mode)) {
> + dev_err(dev, "Failed to map register memory (mode switch)\n");
> + return PTR_ERR(drv->reg_mode);
> + }
> + break;
> + default:
> + break;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev,
> + exynos_uphy_xlate);
> + if (IS_ERR(phy_provider)) {
> + dev_err(drv->dev, "Failed to register phy provider\n");
> + return PTR_ERR(phy_provider);
> + }
> +
> + drv->clk = devm_clk_get(dev, "phy");
> + if (IS_ERR(drv->clk)) {
> + dev_err(dev, "Failed to get clock of phy controller\n");
> + return PTR_ERR(drv->clk);
> + }
> +
> + for (i = 0; i < drv->cfg->num_phys; i++) {
> + char *label = drv->cfg->phys[i].label;
> + struct uphy_instance *p = &drv->uphy_instances[i];
> +
> + dev_info(dev, "Creating phy \"%s\"\n", label);
> + p->phy = devm_phy_create(dev, &exynos_uphy_ops, NULL);
> + if (IS_ERR(p->phy)) {
> + dev_err(drv->dev, "Failed to create uphy \"%s\"\n",
> + label);
> + return PTR_ERR(p->phy);
> + }
> +
> + p->cfg = &drv->cfg->phys[i];
> + p->drv = drv;
> + phy_set_drvdata(p->phy, p);
> +
> + clk = clk_get(dev, p->cfg->label);
> + if (IS_ERR(clk)) {
> + dev_err(dev, "Failed to get clock of \"%s\" phy\n",
> + p->cfg->label);
> + return PTR_ERR(drv->clk);
> + }
> +
> + p->rate = clk_get_rate(clk);
> +
> + if (p->cfg->rate_to_clk) {
> + p->clk = p->cfg->rate_to_clk(p->rate);
> + if (p->clk == CLKSEL_ERROR) {
> + dev_err(dev, "Clock rate (%ld) not supported\n",
> + p->rate);
> + clk_put(clk);
> + return -EINVAL;
> + }
> + }
> + clk_put(clk);
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PHY_EXYNOS4210_USB
> +extern const struct uphy_config exynos4210_uphy_config;
> +#endif
> +
> +#ifdef CONFIG_PHY_EXYNOS4212_USB
> +extern const struct uphy_config exynos4212_uphy_config;
> +#endif
> +
> +static const struct of_device_id exynos_uphy_of_match[] = {
> +#ifdef CONFIG_PHY_EXYNOS4210_USB
> + {
> + .compatible = "samsung,exynos4210-usbphy",
> + .data = &exynos4210_uphy_config,
> + },
> +#endif
> +#ifdef CONFIG_PHY_EXYNOS4212_USB
> + {
> + .compatible = "samsung,exynos4212-usbphy",
> + .data = &exynos4212_uphy_config,
> + },
> +#endif
> + { },
> +};
> +
> +static struct platform_driver exynos_uphy_driver = {
> + .probe = exynos_uphy_probe,
> + .driver = {
> + .of_match_table = exynos_uphy_of_match,
> + .name = "exynos-usbphy-new",
> + .owner = THIS_MODULE,
> + }
> +};
> +
> +module_platform_driver(exynos_uphy_driver);
> +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver");
> +MODULE_AUTHOR("Kamil Debski <k.debski@...sung.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:exynos-uphy-new");
> +
> diff --git a/drivers/phy/phy-exynos-usb.h b/drivers/phy/phy-exynos-usb.h
> new file mode 100644
> index 0000000..597a02e
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-usb.h
> @@ -0,0 +1,95 @@
> +/*
> + * Samsung S5P/EXYNOS SoC series USB PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Kamil Debski <k.debski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _PHY_SAMSUNG_NEW_H
> +#define _PHY_SAMSUNG_NEW_H
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +
> +#define CLKSEL_ERROR -1
> +
> +#ifndef KHZ
> +#define KHZ 1000
> +#endif
> +
> +#ifndef MHZ
> +#define MHZ (KHZ * KHZ)
> +#endif
> +
> +enum phy_type {
> + PHY_DEVICE,
> + PHY_HOST,
> +};
> +
> +enum samsung_cpu_type {
> + TYPE_S3C64XX,
> + TYPE_EXYNOS4210,
> + TYPE_EXYNOS4212,
> + TYPE_EXYNOS5250,
> +};
> +
> +enum uphy_state {
> + STATE_OFF,
> + STATE_ON,
> +};
> +
> +struct uphy_driver;
> +struct uphy_instance;
> +struct uphy_config;
> +
> +struct uphy_instance {
> + struct uphy_driver *drv;
> + struct phy *phy;
> + const struct common_phy *cfg;
> + enum uphy_state state;
> + int ref_cnt;
> + u32 clk;
> + unsigned long rate;
> +};
> +
> +struct uphy_driver {
> + struct device *dev;
> + spinlock_t lock;
> + void __iomem *reg_phy;
> + void __iomem *reg_isol;
> + void __iomem *reg_mode;
> + const struct uphy_config *cfg;
> + struct clk *clk;
> + struct uphy_instance uphy_instances[0];
> +};
> +
> +struct common_phy {
> + char *label;
> + enum phy_type type;
> + unsigned int id;
> + u32 (*rate_to_clk)(unsigned long);
> + int (*power_on)(struct uphy_instance *);
> + int (*power_off)(struct uphy_instance *);
> +};
> +
> +
> +struct uphy_config {
> + enum samsung_cpu_type cpu;
> + int num_phys;
> + const struct common_phy *phys;
> +};
> +
> +#endif
> +
> diff --git a/drivers/phy/phy-exynos4210-usb.c b/drivers/phy/phy-exynos4210-usb.c
> new file mode 100644
> index 0000000..4b849e7
> --- /dev/null
> +++ b/drivers/phy/phy-exynos4210-usb.c
> @@ -0,0 +1,315 @@
> +/*
> + * Samsung S5P/EXYNOS SoC series USB PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Kamil Debski <k.debski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include "phy-exynos-usb.h"
> +
> +/* Exynos USB PHY registers */
> +
> +/* PHY power control */
> +#define EXYNOS_4210_UPHYPWR 0x0
> +
> +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND (1 << 0)
> +#define EXYNOS_4210_UPHYPWR_PHY0_PWR (1 << 3)
> +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR (1 << 4)
> +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP (1 << 5)
> +#define EXYNOS_4210_UPHYPWR_PHY0 ( \
> + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \
> + EXYNOS_4210_UPHYPWR_PHY0_PWR | \
> + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \
> + EXYNOS_4210_UPHYPWR_PHY0_SLEEP)
> +
> +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND (1 << 6)
> +#define EXYNOS_4210_UPHYPWR_PHY1_PWR (1 << 7)
> +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP (1 << 8)
> +#define EXYNOS_4210_UPHYPWR_PHY1 ( \
> + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \
> + EXYNOS_4210_UPHYPWR_PHY1_PWR | \
> + EXYNOS_4210_UPHYPWR_PHY1_SLEEP)
> +
> +#define EXYNOS_4210_UPHYPWR_HSCI0_SUSPEND (1 << 9)
> +#define EXYNOS_4210_UPHYPWR_HSCI0_SLEEP (1 << 10)
> +#define EXYNOS_4210_UPHYPWR_HSCI0 ( \
> + EXYNOS_4210_UPHYPWR_HSCI0_SUSPEND | \
> + EXYNOS_4210_UPHYPWR_HSCI0_SLEEP)
> +
> +#define EXYNOS_4210_UPHYPWR_HSCI1_SUSPEND (1 << 11)
> +#define EXYNOS_4210_UPHYPWR_HSCI1_SLEEP (1 << 12)
> +#define EXYNOS_4210_UPHYPWR_HSCI1 ( \
> + EXYNOS_4210_UPHYPWR_HSCI1_SUSPEND | \
> + EXYNOS_4210_UPHYPWR_HSCI1_SLEEP)
> +
> +/* PHY clock control */
> +#define EXYNOS_4210_UPHYCLK 0x4
> +
> +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
> +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
> +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
> +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
> +
> +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP (0x1 << 2)
> +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON (0x1 << 4)
> +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON (0x1 << 7)
> +
> +/* PHY reset control */
> +#define EXYNOS_4210_UPHYRST 0x8
> +
> +#define EXYNOS_4210_URSTCON_PHY0 (1 << 0)
> +#define EXYNOS_4210_URSTCON_OTG_HLINK (1 << 1)
> +#define EXYNOS_4210_URSTCON_OTG_PHYLINK (1 << 2)
> +#define EXYNOS_4210_URSTCON_PHY1_ALL (1 << 3)
> +#define EXYNOS_4210_URSTCON_PHY1_P0 (1 << 4)
> +#define EXYNOS_4210_URSTCON_PHY1_P1P2 (1 << 5)
> +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL (1 << 6)
> +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 (1 << 7)
> +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 (1 << 8)
> +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 (1 << 9)
> +
> +/* Isolation, configured in the power management unit */
> +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x0
> +#define EXYNOS_4210_USB_ISOL_DEVICE (1 << 0)
> +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x4
> +#define EXYNOS_4210_USB_ISOL_HOST (1 << 0)
> +
> +/* USBYPHY1 Floating prevention */
> +#define EXYNOS_4210_UPHY1CON 0x34
> +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1
> +
> +enum exynos4210_phy_id {
> + EXYNOS4210_DEVICE,
> + EXYNOS4210_HOST,
> + EXYNOS4210_HSIC0,
> + EXYNOS4210_HSIC1,
> + EXYNOS4210_NUM_PHYS,
> +};
> +
> +/* exynos4210_rate_to_clk() converts the supplied clock rate to the value that
> + * can be written to the phy register. */
> +static u32 exynos4210_rate_to_clk(unsigned long rate)
> +{
> + unsigned int clksel;
> +
> + switch (rate) {
> + case 12 * MHZ:
> + clksel = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ;
> + break;
> + case 24 * MHZ:
> + clksel = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ;
> + break;
> + case 48 * MHZ:
> + clksel = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ;
> + break;
> + default:
> + clksel = CLKSEL_ERROR;
> + }
> +
> + return clksel;
> +}
> +
> +static void exynos4210_isol(struct uphy_instance *inst, bool on)
> +{
> + struct uphy_driver *drv = inst->drv;
> + u32 offset;
> + u32 mask;
> + u32 tmp;
> +
> + if (!drv->reg_isol)
> + return;
> +
> + switch (inst->cfg->id) {
> + case EXYNOS4210_DEVICE:
> + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET;
> + mask = EXYNOS_4210_USB_ISOL_DEVICE;
> + break;
> + case EXYNOS4210_HOST:
> + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET;
> + mask = EXYNOS_4210_USB_ISOL_HOST;
> + break;
> + default:
> + return;
> + };
> +
> + tmp = readl(drv->reg_isol + offset);
> + if (on)
> + tmp &= ~mask;
> + else
> + tmp |= mask;
> + writel(tmp, drv->reg_isol + offset);
> +}
> +
> +static void exynos4210_phy_pwr(struct uphy_instance *inst, bool on)
> +{
> + struct uphy_driver *drv = inst->drv;
> + u32 rstbits = 0;
> + u32 phypwr = 0;
> + u32 rst;
> + u32 pwr;
> +
> + switch (inst->cfg->id) {
> + case EXYNOS4210_DEVICE:
> + phypwr = EXYNOS_4210_UPHYPWR_PHY0;
> + rstbits = EXYNOS_4210_URSTCON_PHY0;
> + break;
> + case EXYNOS4210_HOST:
> + phypwr = EXYNOS_4210_UPHYPWR_PHY1;
> + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL |
> + EXYNOS_4210_URSTCON_PHY1_P0 |
> + EXYNOS_4210_URSTCON_PHY1_P1P2 |
> + EXYNOS_4210_URSTCON_HOST_LINK_ALL |
> + EXYNOS_4210_URSTCON_HOST_LINK_P0;
> + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON);
> + break;
> + case EXYNOS4210_HSIC0:
> + phypwr = EXYNOS_4210_UPHYPWR_HSCI0;
> + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
> + EXYNOS_4210_URSTCON_HOST_LINK_P1;
> + break;
> + case EXYNOS4210_HSIC1:
> + phypwr = EXYNOS_4210_UPHYPWR_HSCI1;
> + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
> + EXYNOS_4210_URSTCON_HOST_LINK_P2;
> + break;
> + };
> +
> + if (on) {
> + writel(inst->clk, drv->reg_phy + EXYNOS_4210_UPHYCLK);
> +
> + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
> + pwr &= ~phypwr;
> + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
> +
> + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST);
> + rst |= rstbits;
> + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
> + udelay(10);
> + rst &= ~rstbits;
> + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
> + } else {
> + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
> + pwr |= phypwr;
> + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
> + }
> +}
> +
> +static int exynos4210_power_on(struct uphy_instance *inst)
> +{
> + struct uphy_driver *drv = inst->drv;
> +
> + if (inst->state == STATE_ON) {
> + dev_err(drv->dev, "usb phy \"%s\" already on",
> + inst->cfg->label);
> + return -ENODEV;
> + }
> + inst->state = STATE_ON;
> + inst->ref_cnt++;
> + if (inst->ref_cnt > 1)
> + return 0;
> +
> + exynos4210_isol(inst, 0);
> + exynos4210_phy_pwr(inst, 1);
> +
> + /* Power on the device, as it is necessary for HSIC to work */
> + if (inst->cfg->id == EXYNOS4210_HOST) {
> + struct uphy_instance *device =
> + &drv->uphy_instances[EXYNOS4210_DEVICE];
> + device->ref_cnt++;
> + if (device->ref_cnt > 1)
> + return 0;
> + exynos4210_phy_pwr(device, 1);
> + exynos4210_isol(device, 0);
> + }
> +
> + return 0;
> +}
> +
> +static int exynos4210_power_off(struct uphy_instance *inst)
> +{
> + struct uphy_driver *drv = inst->drv;
> +
> + if (inst->state == STATE_OFF) {
> + dev_err(drv->dev, "usb phy \"%s\" already off",
> + inst->cfg->label);
> + return -EINVAL;
> + }
> +
> + inst->state = STATE_OFF;
> + inst->ref_cnt++;
> + if (inst->ref_cnt > 0)
> + return 0;
> +
> + exynos4210_phy_pwr(inst, 0);
> + exynos4210_isol(inst, 1);
> +
> + if (inst->cfg->id == EXYNOS4210_HOST) {
> + struct uphy_instance *device =
> + &drv->uphy_instances[EXYNOS4210_DEVICE];
> + device->ref_cnt--;
> + if (device->ref_cnt > 0)
> + return 0;
> + exynos4210_phy_pwr(device, 0);
> + exynos4210_isol(device, 1);
> + }
> +
> + return 0;
> +}
> +
> +
> +static const struct common_phy exynos4210_phys[] = {
> + {
> + .label = "device",
> + .type = PHY_DEVICE,
> + .id = EXYNOS4210_DEVICE,
> + .rate_to_clk = exynos4210_rate_to_clk,
> + .power_on = exynos4210_power_on,
> + .power_off = exynos4210_power_off,
> + },
> + {
> + .label = "host",
> + .type = PHY_HOST,
> + .id = EXYNOS4210_HOST,
> + .rate_to_clk = exynos4210_rate_to_clk,
> + .power_on = exynos4210_power_on,
> + .power_off = exynos4210_power_off,
> + },
> + {
> + .label = "hsic0",
> + .type = PHY_HOST,
> + .id = EXYNOS4210_HSIC0,
> + .rate_to_clk = exynos4210_rate_to_clk,
> + .power_on = exynos4210_power_on,
> + .power_off = exynos4210_power_off,
> + },
> + {
> + .label = "hsic1",
> + .type = PHY_HOST,
> + .id = EXYNOS4210_HSIC1,
> + .rate_to_clk = exynos4210_rate_to_clk,
> + .power_on = exynos4210_power_on,
> + .power_off = exynos4210_power_off,
> + },
> + {},
> +};
> +
> +const struct uphy_config exynos4210_uphy_config = {
> + .cpu = TYPE_EXYNOS4210,
> + .num_phys = EXYNOS4210_NUM_PHYS,
> + .phys = exynos4210_phys,
> +};
> +
> diff --git a/drivers/phy/phy-exynos4212-usb.c b/drivers/phy/phy-exynos4212-usb.c
> new file mode 100644
> index 0000000..80480a4
> --- /dev/null
> +++ b/drivers/phy/phy-exynos4212-usb.c
> @@ -0,0 +1,349 @@
> +/*
> + * Samsung S5P/EXYNOS SoC series USB PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Kamil Debski <k.debski@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include "phy-exynos-usb.h"
> +
> +/* Exynos USB PHY registers */
> +
> +/* PHY power control */
> +#define EXYNOS_4212_UPHYPWR 0x0
> +
> +#define EXYNOS_4212_UPHYPWR_DEV_SUSPEND (1 << 0)
> +#define EXYNOS_4212_UPHYPWR_DEV_PWR (1 << 3)
> +#define EXYNOS_4212_UPHYPWR_DEV_OTG_PWR (1 << 4)
> +#define EXYNOS_4212_UPHYPWR_DEV_SLEEP (1 << 5)
> +#define EXYNOS_4212_UPHYPWR_DEV ( \
> + EXYNOS_4212_UPHYPWR_DEV_SUSPEND | \
> + EXYNOS_4212_UPHYPWR_DEV_PWR | \
> + EXYNOS_4212_UPHYPWR_DEV_OTG_PWR | \
> + EXYNOS_4212_UPHYPWR_DEV_SLEEP)
> +
> +#define EXYNOS_4212_UPHYPWR_HOST_SUSPEND (1 << 6)
> +#define EXYNOS_4212_UPHYPWR_HOST_PWR (1 << 7)
> +#define EXYNOS_4212_UPHYPWR_HOST_SLEEP (1 << 8)
> +#define EXYNOS_4212_UPHYPWR_HOST ( \
> + EXYNOS_4212_UPHYPWR_HOST_SUSPEND | \
> + EXYNOS_4212_UPHYPWR_HOST_PWR | \
> + EXYNOS_4212_UPHYPWR_HOST_SLEEP)
> +
> +#define EXYNOS_4212_UPHYPWR_HSCI0_SUSPEND (1 << 9)
> +#define EXYNOS_4212_UPHYPWR_HSCI0_PWR (1 << 10)
> +#define EXYNOS_4212_UPHYPWR_HSCI0_SLEEP (1 << 11)
> +#define EXYNOS_4212_UPHYPWR_HSCI0 ( \
> + EXYNOS_4212_UPHYPWR_HSCI0_SUSPEND | \
> + EXYNOS_4212_UPHYPWR_HSCI0_PWR | \
> + EXYNOS_4212_UPHYPWR_HSCI0_SLEEP)
> +
> +#define EXYNOS_4212_UPHYPWR_HSCI1_SUSPEND (1 << 12)
> +#define EXYNOS_4212_UPHYPWR_HSCI1_PWR (1 << 13)
> +#define EXYNOS_4212_UPHYPWR_HSCI1_SLEEP (1 << 14)
> +#define EXYNOS_4212_UPHYPWR_HSCI1 ( \
> + EXYNOS_4212_UPHYPWR_HSCI1_SUSPEND | \
> + EXYNOS_4212_UPHYPWR_HSCI1_PWR | \
> + EXYNOS_4212_UPHYPWR_HSCI1_SLEEP)
> +
> +/* PHY clock control */
> +#define EXYNOS_4212_UPHYCLK 0x4
> +
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_MASK (0x7 << 0)
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0)
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0)
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0)
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0)
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0)
> +#define EXYNOS_4212_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0)
> +
> +#define EXYNOS_4212_UPHYCLK_PHY0_ID_PULLUP (0x1 << 3)
> +#define EXYNOS_4212_UPHYCLK_PHY0_COMMON_ON (0x1 << 4)
> +#define EXYNOS_4212_UPHYCLK_PHY1_COMMON_ON (0x1 << 7)
> +
> +#define EXYNOS_4212_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10)
> +#define EXYNOS_4212_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10)
> +#define EXYNOS_4212_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10)
> +#define EXYNOS_4212_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10)
> +#define EXYNOS_4212_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10)
> +#define EXYNOS_4212_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10)
> +
> +/* PHY reset control */
> +#define EXYNOS_4212_UPHYRST 0x8
> +
> +#define EXYNOS_4212_URSTCON_DEVICE (1 << 0)
> +#define EXYNOS_4212_URSTCON_OTG_HLINK (1 << 1)
> +#define EXYNOS_4212_URSTCON_OTG_PHYLINK (1 << 2)
> +#define EXYNOS_4212_URSTCON_HOST_PHY (1 << 3)
> +#define EXYNOS_4212_URSTCON_PHY1 (1 << 4)
> +#define EXYNOS_4212_URSTCON_HSIC0 (1 << 5)
> +#define EXYNOS_4212_URSTCON_HSIC1 (1 << 6)
> +#define EXYNOS_4212_URSTCON_HOST_LINK_ALL (1 << 7)
> +#define EXYNOS_4212_URSTCON_HOST_LINK_P0 (1 << 8)
> +#define EXYNOS_4212_URSTCON_HOST_LINK_P1 (1 << 9)
> +#define EXYNOS_4212_URSTCON_HOST_LINK_P2 (1 << 10)
> +
> +/* Isolation, configured in the power management unit */
> +#define EXYNOS_4212_USB_ISOL_OFFSET 0x0
> +#define EXYNOS_4212_USB_ISOL_OTG (1 << 0)
> +#define EXYNOS_4212_USB_ISOL_HSIC0_OFFSET 0x4
> +#define EXYNOS_4212_USB_ISOL_HSIC0 (1 << 0)
> +#define EXYNOS_4212_USB_ISOL_HSIC1_OFFSET 0x8
> +#define EXYNOS_4212_USB_ISOL_HSIC1 (1 << 0)
> +
> +enum exynos4x12_phy_id {
> + EXYNOS4212_DEVICE,
> + EXYNOS4212_HOST,
> + EXYNOS4212_HSIC0,
> + EXYNOS4212_HSIC1,
> + EXYNOS4212_NUM_PHYS,
> +};
> +
> +/* exynos4212_rate_to_clk() converts the supplied clock rate to the value that
> + * can be written to the phy register. */
> +static u32 exynos4212_rate_to_clk(unsigned long rate)
> +{
> + unsigned int clksel;
> +
> + /* EXYNOS_4212_UPHYCLK_PHYFSEL_MASK */
> +
> + switch (rate) {
> + case 9600 * KHZ:
> + clksel = EXYNOS_4212_UPHYCLK_PHYFSEL_9MHZ6;
> + break;
> + case 10 * MHZ:
> + clksel = EXYNOS_4212_UPHYCLK_PHYFSEL_10MHZ;
> + break;
> + case 12 * MHZ:
> + clksel = EXYNOS_4212_UPHYCLK_PHYFSEL_12MHZ;
> + break;
> + case 19200 * KHZ:
> + clksel = EXYNOS_4212_UPHYCLK_PHYFSEL_19MHZ2;
> + break;
> + case 20 * MHZ:
> + clksel = EXYNOS_4212_UPHYCLK_PHYFSEL_20MHZ;
> + break;
> + case 24 * MHZ:
> + clksel = EXYNOS_4212_UPHYCLK_PHYFSEL_24MHZ;
> + break;
> + case 50 * MHZ:
> + clksel = EXYNOS_4212_UPHYCLK_PHYFSEL_50MHZ;
> + break;
> + default:
> + clksel = CLKSEL_ERROR;
> + }
> +
> + return clksel;
> +}
> +
> +static void exynos4212_isol(struct uphy_instance *inst, bool on)
> +{
> + struct uphy_driver *drv = inst->drv;
> + u32 offset;
> + u32 mask;
> + u32 tmp;
> +
> + if (!drv->reg_isol)
> + return;
> +
> + switch (inst->cfg->id) {
> + case EXYNOS4212_DEVICE:
> + offset = EXYNOS_4212_USB_ISOL_OFFSET;
> + mask = EXYNOS_4212_USB_ISOL_OTG;
> + break;
> + case EXYNOS4212_HOST:
> + offset = EXYNOS_4212_USB_ISOL_OFFSET;
> + mask = EXYNOS_4212_USB_ISOL_OTG;
> + break;
> + case EXYNOS4212_HSIC0:
> + offset = EXYNOS_4212_USB_ISOL_HSIC0_OFFSET;
> + mask = EXYNOS_4212_USB_ISOL_HSIC0;
> + break;
> + case EXYNOS4212_HSIC1:
> + offset = EXYNOS_4212_USB_ISOL_HSIC1_OFFSET;
> + mask = EXYNOS_4212_USB_ISOL_HSIC1;
> + break;
> + default:
> + return;
> + };
> +
> + tmp = readl(drv->reg_isol + offset);
> + if (on)
> + tmp &= ~mask;
> + else
> + tmp |= mask;
> + writel(tmp, drv->reg_isol + offset);
> +}
> +
> +static void exynos4212_phy_pwr(struct uphy_instance *inst, bool on)
> +{
> + struct uphy_driver *drv = inst->drv;
> + u32 rstbits = 0;
> + u32 phypwr = 0;
> + u32 rst;
> + u32 pwr;
> +
> + switch (inst->cfg->id) {
> + case EXYNOS4212_DEVICE:
> + phypwr = EXYNOS_4212_UPHYPWR_DEV;
> + rstbits = EXYNOS_4212_URSTCON_DEVICE;
> + break;
> + case EXYNOS4212_HOST:
> + phypwr = EXYNOS_4212_UPHYPWR_HOST;
> + rstbits = EXYNOS_4212_URSTCON_HOST_PHY;
> + break;
> + case EXYNOS4212_HSIC0:
> + phypwr = EXYNOS_4212_UPHYPWR_HSCI0;
> + rstbits = EXYNOS_4212_URSTCON_HSIC1 |
> + EXYNOS_4212_URSTCON_HOST_LINK_P0 |
> + EXYNOS_4212_URSTCON_HOST_PHY;
> + break;
> + case EXYNOS4212_HSIC1:
> + phypwr = EXYNOS_4212_UPHYPWR_HSCI1;
> + rstbits = EXYNOS_4212_URSTCON_HSIC1 |
> + EXYNOS_4212_URSTCON_HOST_LINK_P1;
> + break;
> + };
> +
> + if (on) {
> + writel(inst->clk, drv->reg_phy + EXYNOS_4212_UPHYCLK);
> +
> + pwr = readl(drv->reg_phy + EXYNOS_4212_UPHYPWR);
> + pwr &= ~phypwr;
> + writel(pwr, drv->reg_phy + EXYNOS_4212_UPHYPWR);
> +
> + rst = readl(drv->reg_phy + EXYNOS_4212_UPHYRST);
> + rst |= rstbits;
> + writel(rst, drv->reg_phy + EXYNOS_4212_UPHYRST);
> + udelay(10);
> + rst &= ~rstbits;
> + writel(rst, drv->reg_phy + EXYNOS_4212_UPHYRST);
> + } else {
> + pwr = readl(drv->reg_phy + EXYNOS_4212_UPHYPWR);
> + pwr |= phypwr;
> + writel(pwr, drv->reg_phy + EXYNOS_4212_UPHYPWR);
> + }
> +}
> +
> +static int exynos4212_power_on(struct uphy_instance *inst)
> +{
> + struct uphy_driver *drv = inst->drv;
> +
> + if (inst->state == STATE_ON) {
> + dev_err(drv->dev, "usb phy \"%s\" already on",
> + inst->cfg->label);
> + return -ENODEV;
> + }
> +
> + inst->state = STATE_ON;
> + inst->ref_cnt++;
> + if (inst->ref_cnt > 1)
> + return 0;
> +
> + exynos4212_isol(inst, 0);
> + exynos4212_phy_pwr(inst, 1);
> +
> + /* Power on the device, as it is necessary for HSIC to work */
> + if (inst->cfg->id == EXYNOS4212_HSIC0) {
> + struct uphy_instance *device =
> + &drv->uphy_instances[EXYNOS4212_DEVICE];
> + device->ref_cnt++;
> + if (device->ref_cnt > 1)
> + return 0;
> + exynos4212_phy_pwr(device, 1);
> + exynos4212_isol(device, 0);
> + }
> +
> + return 0;
> +}
> +
> +static int exynos4212_power_off(struct uphy_instance *inst)
> +{
> + struct uphy_driver *drv = inst->drv;
> +
> + if (inst->state == STATE_OFF) {
> + dev_err(drv->dev, "usb phy \"%s\" already off",
> + inst->cfg->label);
> + return -EINVAL;
> + }
> +
> + inst->state = STATE_OFF;
> + inst->ref_cnt--;
> +
> + if (inst->ref_cnt > 0)
> + return 0;
> +
> + exynos4212_phy_pwr(inst, 0);
> + exynos4212_isol(inst, 1);
> +
> + if (inst->cfg->id == EXYNOS4212_HSIC0) {
> + struct uphy_instance *device =
> + &drv->uphy_instances[EXYNOS4212_DEVICE];
> + device->ref_cnt--;
> + if (device->ref_cnt > 0)
> + return 0;
> + exynos4212_phy_pwr(device, 0);
> + exynos4212_isol(device, 1);
> + }
> +
> + return 0;
> +}
> +
> +
> +static const struct common_phy exynos4212_phys[] = {
> + {
> + .label = "device",
> + .type = PHY_DEVICE,
> + .id = EXYNOS4212_DEVICE,
> + .rate_to_clk = exynos4212_rate_to_clk,
> + .power_on = exynos4212_power_on,
> + .power_off = exynos4212_power_off,
> + },
> + {
> + .label = "host",
> + .type = PHY_HOST,
> + .id = EXYNOS4212_HOST,
> + .rate_to_clk = exynos4212_rate_to_clk,
> + .power_on = exynos4212_power_on,
> + .power_off = exynos4212_power_off,
> + },
> + {
> + .label = "hsic0",
> + .type = PHY_HOST,
> + .id = EXYNOS4212_HSIC0,
> + .rate_to_clk = exynos4212_rate_to_clk,
> + .power_on = exynos4212_power_on,
> + .power_off = exynos4212_power_off,
> + },
> + {
> + .label = "hsic1",
> + .type = PHY_HOST,
> + .id = EXYNOS4212_HSIC1,
> + .rate_to_clk = exynos4212_rate_to_clk,
> + .power_on = exynos4212_power_on,
> + .power_off = exynos4212_power_off,
> + },
> + {},
> +};
> +
> +const struct uphy_config exynos4212_uphy_config = {
> + .cpu = TYPE_EXYNOS4212,
> + .num_phys = EXYNOS4212_NUM_PHYS,
> + .phys = exynos4212_phys,
> +};
> +
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Best Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists