| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1379868332-2808-1-git-send-email-sebastian.hesselbarth@gmail.com>
Date: Sun, 22 Sep 2013 18:45:32 +0200
From: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc: Olof Johansson <olof@...om.net>, Arnd Bergmann <arnd@...db.de>,
Alessandro Rubini <rubini@...pv.it>,
Linus Walleij <linus.walleij@...aro.org>,
STEricsson <STEricsson_nomadik_linux@...t.st.com>,
Mike Turquette <mturquette@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 02/26] clk: nomadik: move src init out of nomadik_clk_init
nomadik_clk_init currently also maps system reset controller base address
used by clocks and registers a reboot notifier. To allow further cleanup of
nomadik clk setup, this moves system reset controller setup from
nomadik_clk_init to its own function.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
---
Changelog:
v1->v2:
- adapt to clk-nomadik changes
Cc: Olof Johansson <olof@...om.net>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Alessandro Rubini <rubini@...pv.it>
Cc: Linus Walleij <linus.walleij@...aro.org>
Cc: STEricsson <STEricsson_nomadik_linux@...t.st.com>
Cc: Mike Turquette <mturquette@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
drivers/clk/clk-nomadik.c | 144 +++++++++++++++++++++++----------------------
1 file changed, 74 insertions(+), 70 deletions(-)
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 4d978a3..06b29c26 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -62,6 +62,79 @@ static DEFINE_SPINLOCK(src_lock);
/* Base address of the SRC */
static void __iomem *src_base;
+static int nomadik_clk_reboot_handler(struct notifier_block *this,
+ unsigned long code,
+ void *unused)
+{
+ u32 val;
+
+ /* The main chrystal need to be enabled for reboot to work */
+ val = readl(src_base + SRC_XTALCR);
+ val &= ~SRC_XTALCR_MXTALOVER;
+ val |= SRC_XTALCR_MXTALEN;
+ pr_crit("force-enabling MXTALO\n");
+ writel(val, src_base + SRC_XTALCR);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block nomadik_clk_reboot_notifier = {
+ .notifier_call = nomadik_clk_reboot_handler,
+};
+
+static const struct of_device_id nomadik_src_match[] __initconst = {
+ { .compatible = "stericsson,nomadik-src" },
+ { /* sentinel */ }
+};
+
+static void nomadik_src_init(void)
+{
+ struct device_node *np;
+ u32 val;
+
+ np = of_find_matching_node(NULL, nomadik_src_match);
+ if (!np) {
+ pr_crit("no matching node for SRC, aborting clock init\n");
+ return;
+ }
+ src_base = of_iomap(np, 0);
+ if (!src_base) {
+ pr_err("%s: must have src parent node with REGS (%s)\n",
+ __func__, np->name);
+ return;
+ }
+
+ /* Set all timers to use the 2.4 MHz TIMCLK */
+ val = readl(src_base + SRC_CR);
+ val |= SRC_CR_T0_ENSEL;
+ val |= SRC_CR_T1_ENSEL;
+ val |= SRC_CR_T2_ENSEL;
+ val |= SRC_CR_T3_ENSEL;
+ val |= SRC_CR_T4_ENSEL;
+ val |= SRC_CR_T5_ENSEL;
+ val |= SRC_CR_T6_ENSEL;
+ val |= SRC_CR_T7_ENSEL;
+ writel(val, src_base + SRC_CR);
+
+ val = readl(src_base + SRC_XTALCR);
+ pr_info("SXTALO is %s\n",
+ (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
+ pr_info("MXTAL is %s\n",
+ (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
+ if (of_property_read_bool(np, "disable-sxtalo")) {
+ /* The machine uses an external oscillator circuit */
+ val |= SRC_XTALCR_SXTALDIS;
+ pr_info("disabling SXTALO\n");
+ }
+ if (of_property_read_bool(np, "disable-mxtalo")) {
+ /* Disable this too: also run by external oscillator */
+ val |= SRC_XTALCR_MXTALOVER;
+ val &= ~SRC_XTALCR_MXTALEN;
+ pr_info("disabling MXTALO\n");
+ }
+ writel(val, src_base + SRC_XTALCR);
+ register_reboot_notifier(&nomadik_clk_reboot_notifier);
+}
+
/**
* struct clk_pll1 - Nomadik PLL1 clock
* @hw: corresponding clock hardware entry
@@ -487,11 +560,6 @@ static void __init of_nomadik_src_clk_setup(struct device_node *np)
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
-static const struct of_device_id nomadik_src_match[] __initconst = {
- { .compatible = "stericsson,nomadik-src" },
- { /* sentinel */ }
-};
-
static const struct of_device_id nomadik_src_clk_match[] __initconst = {
{
.compatible = "fixed-clock",
@@ -516,72 +584,8 @@ static const struct of_device_id nomadik_src_clk_match[] __initconst = {
{ /* sentinel */ }
};
-static int nomadik_clk_reboot_handler(struct notifier_block *this,
- unsigned long code,
- void *unused)
-{
- u32 val;
-
- /* The main chrystal need to be enabled for reboot to work */
- val = readl(src_base + SRC_XTALCR);
- val &= ~SRC_XTALCR_MXTALOVER;
- val |= SRC_XTALCR_MXTALEN;
- pr_crit("force-enabling MXTALO\n");
- writel(val, src_base + SRC_XTALCR);
- return NOTIFY_OK;
-}
-
-static struct notifier_block nomadik_clk_reboot_notifier = {
- .notifier_call = nomadik_clk_reboot_handler,
-};
-
void __init nomadik_clk_init(void)
{
- struct device_node *np;
- u32 val;
-
- np = of_find_matching_node(NULL, nomadik_src_match);
- if (!np) {
- pr_crit("no matching node for SRC, aborting clock init\n");
- return;
- }
- src_base = of_iomap(np, 0);
- if (!src_base) {
- pr_err("%s: must have src parent node with REGS (%s)\n",
- __func__, np->name);
- return;
- }
-
- /* Set all timers to use the 2.4 MHz TIMCLK */
- val = readl(src_base + SRC_CR);
- val |= SRC_CR_T0_ENSEL;
- val |= SRC_CR_T1_ENSEL;
- val |= SRC_CR_T2_ENSEL;
- val |= SRC_CR_T3_ENSEL;
- val |= SRC_CR_T4_ENSEL;
- val |= SRC_CR_T5_ENSEL;
- val |= SRC_CR_T6_ENSEL;
- val |= SRC_CR_T7_ENSEL;
- writel(val, src_base + SRC_CR);
-
- val = readl(src_base + SRC_XTALCR);
- pr_info("SXTALO is %s\n",
- (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
- pr_info("MXTAL is %s\n",
- (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
- if (of_property_read_bool(np, "disable-sxtalo")) {
- /* The machine uses an external oscillator circuit */
- val |= SRC_XTALCR_SXTALDIS;
- pr_info("disabling SXTALO\n");
- }
- if (of_property_read_bool(np, "disable-mxtalo")) {
- /* Disable this too: also run by external oscillator */
- val |= SRC_XTALCR_MXTALOVER;
- val &= ~SRC_XTALCR_MXTALEN;
- pr_info("disabling MXTALO\n");
- }
- writel(val, src_base + SRC_XTALCR);
- register_reboot_notifier(&nomadik_clk_reboot_notifier);
-
+ nomadik_src_init();
of_clk_init(nomadik_src_clk_match);
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists