| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <524376A0.7020405@linaro.org>
Date: Thu, 26 Sep 2013 01:49:52 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
CC: Thomas Gleixner <tglx@...utronix.de>, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kernel@...gutronix.de,
John Stultz <john.stultz@...aro.org>
Subject: Re: [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs
On 09/25/2013 05:32 PM, Uwe Kleine-König wrote:
> Hello Daniel,
>
> On Wed, Sep 25, 2013 at 04:33:24PM +0200, Daniel Lezcano wrote:
>> On 09/16/2013 11:44 AM, Uwe Kleine-König wrote:
>>> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
>>> ---
>>> I'm not sure that the way I implemented if a given timer is used as
>>> clock_source or clock_event_device is robust. Does it need locking?
>>> The reason to create a timer device for each timer instead of a single
>>> device of all of them is that it makes it cleaner to specify irqs and
>>> clks which each timer has one of each respectively. I didn't find an
>>> example, but while looking I wondered if in zevio-timer.c a single timer
>>> can really support both clock_event and clocksource.
>>>
>>> I guess for inclusion I need to write a document describing the
>>> of-binding. I will include that in the next iteration.
>>
>> Right and a nice description of the timer would be valuable.
> in the binding document or the commit log?
commit log.
>> The first letter of the description should be in capital "Provide".
>>
>>> checkpatch wails that the description of CLKSRC_EFM32 is too short. I
>>> think it's OK though.
>>>
>>> Best regards
>>> Uwe
>>>
>>> drivers/clocksource/Kconfig | 8 ++
>>> drivers/clocksource/Makefile | 1 +
>>> drivers/clocksource/time-efm32.c | 274 +++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 283 insertions(+)
>>> create mode 100644 drivers/clocksource/time-efm32.c
>>>
>>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>>> index 41c6946..410b152 100644
>>> --- a/drivers/clocksource/Kconfig
>>> +++ b/drivers/clocksource/Kconfig
>>> @@ -70,6 +70,14 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
>>> help
>>> Use the always on PRCMU Timer as sched_clock
>>>
>>> +config CLKSRC_EFM32
>>> + bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
>>> + depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
>>> + default ARCH_EFM32
>>> + help
>>> + Support to use the timers of EFM32 SoCs as clock source and clock
>>> + event device.
>>> +
>>
>> No option for the timer. It must be selected by the platform.
> It is. If ARCH_EFM32=y there is no prompt and the "default ARCH_EFM32"
> makes it true.
ok, with that but if ARCH_EFM32=no, you can enable it manually. AFAIK,
we want to prevent this and let the correct arch to enable it.
John ?
>>> config ARM_ARCH_TIMER
>>> bool
>>> select CLKSRC_OF if OF
>>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>>> index 704d6d3..33621ef 100644
>>> --- a/drivers/clocksource/Makefile
>>> +++ b/drivers/clocksource/Makefile
>>> @@ -27,6 +27,7 @@ obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
>>> obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
>>> obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o
>>> obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
>>> +obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
>>> obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
>>> obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
>>> obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
>>> diff --git a/drivers/clocksource/time-efm32.c b/drivers/clocksource/time-efm32.c
>>> new file mode 100644
>>> index 0000000..6ead8d7
>>> --- /dev/null
>>> +++ b/drivers/clocksource/time-efm32.c
>>> @@ -0,0 +1,274 @@
>>> +/*
>>> + * Copyright (C) 2013 Pengutronix
>>> + * Uwe Kleine-Koenig <u.kleine-koenig@...gutronix.de>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify it under
>>> + * the terms of the GNU General Public License version 2 as published by the
>>> + * Free Software Foundation.
>>> + */
>>> +
>>> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>>> +
>>> +#include <linux/kernel.h>
>>> +#include <linux/clocksource.h>
>>> +#include <linux/clockchips.h>
>>> +#include <linux/irq.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/of_irq.h>
>>> +#include <linux/clk.h>
>>> +
>>> +#define TIMERn_CTRL 0x00
>>> +#define TIMERn_CTRL_PRESC(val) (((val) & 0xf) << 24)
>>
>> You can replace all binary shift with the BIT macro.
> The BIT macro only can define values that have a single bit set. So it
> doesn't help for the definition of the TIMERn_CTRL_PRESC macro and most
> others. And then I prefer to have a common way to define the register
> descriptions.
Ok.
>>> +#define TIMERn_CTRL_PRESC_1024 TIMERn_CTRL_PRESC(10)
>>> +#define TIMERn_CTRL_CLKSEL(val) (((val) & 0x3) << 16)
>>> +#define TIMERn_CTRL_CLKSEL_PRESCHFPERCLK TIMERn_CTRL_CLKSEL(0)
>>> +#define TIMERn_CTRL_OSMEN 0x00000010
>>> +#define TIMERn_CTRL_MODE(val) (((val) & 0x3) << 0)
>>> +#define TIMERn_CTRL_MODE_UP TIMERn_CTRL_MODE(0)
>>> +#define TIMERn_CTRL_MODE_DOWN TIMERn_CTRL_MODE(1)
>>> +
>>> +#define TIMERn_CMD 0x04
>>> +#define TIMERn_CMD_START 0x1
>>> +#define TIMERn_CMD_STOP 0x2
>>> +
>>> +#define TIMERn_IEN 0x0c
>>> +#define TIMERn_IF 0x10
>>> +#define TIMERn_IFS 0x14
>>> +#define TIMERn_IFC 0x18
>>> +#define TIMERn_IRQ_UF 0x2
>>> +#define TIMERn_IRQ_OF 0x1
>>
>> I see a wrong alignment with the values. May be it is due to my mailer.
> Maybe that's because the patch has one char more (the +) before the
> tabs, that make things look wrong sometimes. In the file it looks ok.
Ok.
>>> +
>>> +#define TIMERn_TOP 0x1c
>>> +#define TIMERn_CNT 0x24
>>> +
>>> +#define TIMER_CLOCKSOURCE 0
>>> +#define TIMER_CLOCKEVENT 1
>>
>> I don't see these macro used anywhere.
> Right, pre-dt cruft.
>
>>> +struct efm32_clock_event_ddata {
>>
>> The structure name looks a bit long to me.
>>
>>> + struct clock_event_device evtdev;
>>> + void __iomem *base;
>>> + unsigned periodic_top;
>>> +};
>>> +static void efm32_clock_event_set_mode(enum clock_event_mode mode,
>>> + struct clock_event_device *evtdev)
>>> +{
>>> + struct efm32_clock_event_ddata *ddata =
>>> + container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
>>
>> Wouldn't be worth to check the previous mode of the timer before
>> switching to a mode where it is already ?
> This isn't a hot path, is it? IIRC this function is called exactly
> twice. And I think it still needs stopping at least in some cases. Then
> it's more complicated and so not worth the effort.
Ok.
>>> + switch (mode) {
>>> + case CLOCK_EVT_MODE_PERIODIC:
>>> + writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
>>> + writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
>>> + writel_relaxed(TIMERn_CTRL_PRESC_1024 |
>>> + TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
>>> + TIMERn_CTRL_MODE_DOWN,
>>> + ddata->base + TIMERn_CTRL);
>>> + writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
>>> + break;
>>> +
>>> + case CLOCK_EVT_MODE_ONESHOT:
>>> + writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
>>> + writel_relaxed(TIMERn_CTRL_PRESC_1024 |
>>> + TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
>>> + TIMERn_CTRL_OSMEN |
>>> + TIMERn_CTRL_MODE_DOWN,
>>> + ddata->base + TIMERn_CTRL);
>>> + break;
>>
>> IMO, these two routines are similar enough to factor them out in a
>> single function.
> I don't know what you want here? A #define for the common bits? I like
> being explicit here to not have to jump around to verify the settings
> with the hardware reference manual.
Never mind, I missed one line when reading the CLOCK_EVT_MODE_PERIODIC
and the CLOCK_EVT_MODE_ONESHOT blocks. At the first glance, they looked
very similar and I thought they can be factored out into a function.
>>> + case CLOCK_EVT_MODE_UNUSED:
>>> + case CLOCK_EVT_MODE_SHUTDOWN:
>>> + writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
>>> + break;
>>> +
>>> + case CLOCK_EVT_MODE_RESUME:
>>> + break;
>>> + }
>>> +}
>>> +
>>> +static int efm32_clock_event_set_next_event(unsigned long evt,
>>> + struct clock_event_device *evtdev)
>>> +{
>>> + struct efm32_clock_event_ddata *ddata =
>>> + container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
>>> +
>>> + writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
>>> + writel_relaxed(evt, ddata->base + TIMERn_CNT);
>>> + writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static irqreturn_t efm32_clock_event_handler(int irq, void *dev_id)
>>> +{
>>> + struct efm32_clock_event_ddata *ddata = dev_id;
>>> +
>>> + writel_relaxed(TIMERn_IRQ_UF, ddata->base + TIMERn_IFC);
>>> +
>>> + ddata->evtdev.event_handler(&ddata->evtdev);
>>> +
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> +static struct efm32_clock_event_ddata clock_event_ddata = {
>>> + .evtdev = {
>>> + .name = "efm32 clockevent",
>>> + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_MODE_PERIODIC,
>>> + .set_mode = efm32_clock_event_set_mode,
>>> + .set_next_event = efm32_clock_event_set_next_event,
>>> + .rating = 200,
>>> + },
>>> +};
>>> +
>>> +static struct irqaction efm32_clock_event_irq = {
>>> + .name = "efm32 clockevent",
>>> + .flags = IRQF_TIMER,
>>> + .handler = efm32_clock_event_handler,
>>> + .dev_id = &clock_event_ddata,
>>> +};
>>
>> Function name looks a bit long.
> Which function? I prefer having a unique prefix for the driver + an
> accurate description. All lines affected by "efm32_clock_event_handler"
> don't even need to be broken, so IMO it's OK like that.
Well, replacing clock_event/clockevent by clkevt and clocksource by
clksrc would have made the functions name shorter. But it is a personal
preference, feel free to ignore it if you prefer your naming convention.
[ ... ]
>>> +
>>> +static void __init efm32_timer_init(struct device_node *np)
>>> +{
>>> + static int has_clocksource, has_clockevent;
>>> + int ret;
>>> +
>>> + if (!has_clocksource) {
>>> + ret = efm32_clocksource_init(np);
>>> + if (!ret) {
>>> + has_clocksource = 1;
>>> + return;
>>> + }
>>> + }
>>> +
>>> + if (!has_clockevent) {
>>> + ret = efm32_clockevent_init(np);
>>> + if (!ret) {
>>> + has_clockevent = 1;
>>> + return;
>>> + }
>>> + }
>>> +}
>>
>> I don't get the purpose of this initialization, can you explain ?
> An efm32 SoC has four timer blocks. A single block can only be used for
> one of clocksource or clockevent device and having more than one
> clocksource or clockevent device doesn't make sense. So this routine
> asserts that the first timer is used as clocksource and the second as
> clockevent device. The others are unused.
Shouldn't be up to the dt to give the timers you want ?
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists