[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <52430871.6040003@samsung.com>
Date: Wed, 25 Sep 2013 17:59:45 +0200
From: Tomasz Stanislawski <t.stanislaws@...sung.com>
To: Mateusz Krawczuk <m.krawczuk@...tner.samsung.com>
Cc: m.chehab@...sung.com, t.figa@...sung.com,
kyungmin.park@...sung.com, b.zolnierkie@...sung.com,
s.nawrocki@...sung.com, linux-arm-kernel@...ts.infradead.org,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 3/4] media: s5p-tv: Fix sdo driver to work with CCF
Rename to 'media: s5p-tv: sdo: integrate with CCF'
On 09/21/2013 05:00 PM, Mateusz Krawczuk wrote:
> Replace clk_enable by clock_enable_prepare and clk_disable with clk_disable_unprepare.
> Clock prepare is required by Clock Common Framework, and old clock driver didn`t support it.
> Without it Common Clock Framework prints a warning.
>
> Signed-off-by: Mateusz Krawczuk <m.krawczuk@...tner.samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
> ---
> drivers/media/platform/s5p-tv/sdo_drv.c | 20 ++++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/media/platform/s5p-tv/sdo_drv.c b/drivers/media/platform/s5p-tv/sdo_drv.c
> index e49ac6c..17272e1 100644
> --- a/drivers/media/platform/s5p-tv/sdo_drv.c
> +++ b/drivers/media/platform/s5p-tv/sdo_drv.c
> @@ -208,9 +208,9 @@ static int sdo_streamon(struct sdo_device *sdev)
> clk_get_rate(sdev->fout_vpll));
> /* enable clock in SDO */
> sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
> - ret = clk_enable(sdev->dacphy);
> + ret = clk_prepare_enable(sdev->dacphy);
> if (ret < 0) {
> - dev_err(sdev->dev, "clk_enable(dacphy) failed\n");
> + dev_err(sdev->dev, "clk_prepare_enable(dacphy) failed\n");
> goto fail;
> }
> /* enable DAC */
> @@ -229,7 +229,7 @@ static int sdo_streamoff(struct sdo_device *sdev)
> int tries;
>
> sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
> - clk_disable(sdev->dacphy);
> + clk_disable_unprepare(sdev->dacphy);
> sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
> for (tries = 100; tries; --tries) {
> if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
> @@ -273,7 +273,7 @@ static int sdo_runtime_suspend(struct device *dev)
> dev_info(dev, "suspend\n");
> regulator_disable(sdev->vdet);
> regulator_disable(sdev->vdac);
> - clk_disable(sdev->sclk_dac);
> + clk_disable_unprepare(sdev->sclk_dac);
> return 0;
> }
>
> @@ -285,7 +285,7 @@ static int sdo_runtime_resume(struct device *dev)
>
> dev_info(dev, "resume\n");
>
> - ret = clk_enable(sdev->sclk_dac);
> + ret = clk_prepare_enable(sdev->sclk_dac);
> if (ret < 0)
> return ret;
>
> @@ -318,7 +318,7 @@ static int sdo_runtime_resume(struct device *dev)
> vdac_r_dis:
> regulator_disable(sdev->vdac);
> dac_clk_dis:
> - clk_disable(sdev->sclk_dac);
> + clk_disable_unprepare(sdev->sclk_dac);
> return ret;
> }
>
> @@ -424,7 +424,11 @@ static int sdo_probe(struct platform_device *pdev)
> }
>
> /* enable gate for dac clock, because mixer uses it */
> - clk_enable(sdev->dac);
> + ret = clk_prepare_enable(sdev->dac);
> + if (ret < 0) {
> + dev_err(dev, "clk_prepare_enable(dac) failed\n");
> + goto fail_fout_vpll;
> + }
>
> /* configure power management */
> pm_runtime_enable(dev);
> @@ -463,7 +467,7 @@ static int sdo_remove(struct platform_device *pdev)
> struct sdo_device *sdev = sd_to_sdev(sd);
>
> pm_runtime_disable(&pdev->dev);
> - clk_disable(sdev->dac);
> + clk_disable_unprepare(sdev->dac);
> clk_put(sdev->fout_vpll);
> clk_put(sdev->dacphy);
> clk_put(sdev->dac);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists