lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:	Tue, 01 Oct 2013 14:30:26 -0600
From:	Stephen Warren <swarren@...dotorg.org>
To:	Laxman Dewangan <ldewangan@...dia.com>
CC:	lee.jones@...aro.org, sameo@...ux.intel.com, broonie@...nel.org,
	linus.walleij@...aro.org, akpm@...ux-foundation.org,
	devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
	rtc-linux@...glegroups.com, rob.herring@...xeda.com,
	mark.rutland@....com, pawel.moll@....com, rob@...dley.net,
	ijc+devicetree@...lion.org.uk, grant.likely@...aro.org
Subject: Re: [PATCH V4 2/3] pincntrl: add support for AMS AS3722 pin control
 driver

On 09/24/2013 11:47 AM, Laxman Dewangan wrote:
> The AS3722 is a compact system PMU suitable for mobile phones, tablets etc.
> 
> Add a driver to support accessing the GPIO, pinmux and pin configuration
> of 8 GPIO pins found on the AMS AS3722 through pin control driver and
> gpiolib.
> 
> The driver will register itself as the pincontrol driver and gpio driver.

> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-as3722.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-as3722.txt

> +AMS AS3722 Pincontrol

This binding document doesn't appear to define any compatible value. I
think there should be one binding document per compatible value, rather
than splitting up the documentation of a particular binding into lots of
different files. As such, shouldn't this documentation all be part of
Documentation/devicetree/bindings/regulator/as3722-regulator.txt?

> +DT node contains the different subnode for pin control to represent

Which "DT node"? This paragraph doesn't make much sense...

> +different states. Each of these subnodes represents some desired
> +configuration for a list of pins. This configuration can include the
> +mux function to select on those pin(s), and various pin configuration
> +parameters, such as pull-up, open drain.

I think that paragraph is meant to say the following, as part of
as3722-regulator.txt:

==========
Optional sub-nodes:

- pinmux: Represents the pinmux configuration of the AS3722 GPIO pins.
This node contains pin configuration nodes, as defined by
pinctrl-bindings.txt
==========

(and then go on to describe the required/optional properties within the
pin configuration nodes)

> +Valid values for pin names are:

I would say "pin property" rather than "pin names" here, to make it
obvious where these values are used.

> +	gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7
> +
> +Valid value of function names are:

Similarly, "function property" here. (and values for not value of).

Other than that, this binding looks reasonable.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ