| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20131002214044.4343.24022@quantum>
Date: Wed, 02 Oct 2013 14:40:44 -0700
From: Mike Turquette <mturquette@...aro.org>
To: Sylwester Nawrocki <sylvester.nawrocki@...il.com>,
linux@....linux.org.uk
Cc: Sylwester Nawrocki <s.nawrocki@...sung.com>,
linux-arm-kernel@...ts.infradead.org, jiada_wang@...tor.com,
kyungmin.park@...sung.com, myungjoo.ham@...sung.com,
t.figa@...sung.com, g.liakhovetski@....de,
laurent.pinchart@...asonboard.com, linux-kernel@...r.kernel.org,
linux-mips@...ux-mips.org, linux-sh@...r.kernel.org
Subject: Re: [PATCH v6 0/5] clk: clock deregistration support
Quoting Sylwester Nawrocki (2013-09-24 14:38:44)
> On 08/30/2013 04:53 PM, Sylwester Nawrocki wrote:
> > This patch series implements clock deregistration in the common clock
> > framework. Comparing to v5 it only includes further corrections of NULL
> > clock handling.
> [...]
> > clk: Provide not locked variant of of_clk_get_from_provider()
> > clkdev: Fix race condition in clock lookup from device tree
> > clk: Add common __clk_get(), __clk_put() implementations
> > clk: Assign module owner of a clock being registered
> > clk: Implement clk_unregister
>
> Hi Mike, Russell,
>
> Would you have any further comments/suggestions on this series ?
I don't have any further comments. The changes look good to me and push
things in the right direction. I'll wait for Laurent's feedback on the
omap3isp driver implications though.
Regards,
Mike
>
> I have inspected all callers of clk_register() and all should be fine
> with regards to dereferencing dev->driver. The first argument to this
> function is either NULL or clk_register() is being called in drivers'
> probe() callback, which ensures dev->driver won't change due to holding
> dev->mutex.
>
> The only issue I found might be at the omap3isp driver, which provides
> clock to its sub-drivers and takes reference on the sub-driver modules.
> When sub-driver calls clk_get() all modules would get locked in memory,
> due to circular reference. One solution to that could be to pass NULL
> struct device pointer, as in the below patch.
>
> ---------8<------------------
> From ca5963041aad67e31324cb5d4d5e2cfce1706d4f Mon Sep 17 00:00:00 2001
> From: Sylwester Nawrocki <s.nawrocki@...sung.com>
> Date: Thu, 19 Sep 2013 23:52:04 +0200
> Subject: [PATCH] omap3isp: Pass NULL device pointer to clk_register()
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@...sung.com>
> ---
> drivers/media/platform/omap3isp/isp.c | 15 ++++++++++-----
> drivers/media/platform/omap3isp/isp.h | 1 +
> 2 files changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/omap3isp/isp.c
> b/drivers/media/platform/omap3isp/isp.c
> index df3a0ec..d7f3c98 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -290,9 +290,11 @@ static int isp_xclk_init(struct isp_device *isp)
> struct clk_init_data init;
> unsigned int i;
>
> + for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i)
> + isp->xclks[i] = ERR_PTR(-EINVAL);
> +
> for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i) {
> struct isp_xclk *xclk = &isp->xclks[i];
> - struct clk *clk;
>
> xclk->isp = isp;
> xclk->id = i == 0 ? ISP_XCLK_A : ISP_XCLK_B;
> @@ -306,9 +308,9 @@ static int isp_xclk_init(struct isp_device *isp)
>
> xclk->hw.init = &init;
>
> - clk = devm_clk_register(isp->dev, &xclk->hw);
> - if (IS_ERR(clk))
> - return PTR_ERR(clk);
> + xclk->clk = clk_register(NULL, &xclk->hw);
> + if (IS_ERR(xclk->clk))
> + return PTR_ERR(xclk->clk);
>
> if (pdata->xclks[i].con_id == NULL &&
> pdata->xclks[i].dev_id == NULL)
> @@ -320,7 +322,7 @@ static int isp_xclk_init(struct isp_device *isp)
>
> xclk->lookup->con_id = pdata->xclks[i].con_id;
> xclk->lookup->dev_id = pdata->xclks[i].dev_id;
> - xclk->lookup->clk = clk;
> + xclk->lookup->clk = xclk->clk;
>
> clkdev_add(xclk->lookup);
> }
> @@ -335,6 +337,9 @@ static void isp_xclk_cleanup(struct isp_device *isp)
> for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i) {
> struct isp_xclk *xclk = &isp->xclks[i];
>
> + if (!IS_ERR(xclk->clk))
> + clk_unregister(xclk->clk);
> +
> if (xclk->lookup)
> clkdev_drop(xclk->lookup);
> }
> diff --git a/drivers/media/platform/omap3isp/isp.h
> b/drivers/media/platform/omap3isp/isp.h
> index cd3eff4..1498f2b 100644
> --- a/drivers/media/platform/omap3isp/isp.h
> +++ b/drivers/media/platform/omap3isp/isp.h
> @@ -135,6 +135,7 @@ struct isp_xclk {
> struct isp_device *isp;
> struct clk_hw hw;
> struct clk_lookup *lookup;
> + struct clk *clk;
> enum isp_xclk_id id;
>
> spinlock_t lock; /* Protects enabled and divider */
> --
> ---------8<------------------
>
>
> Alternatively an additional argument could be added to the clk_register*()
> functions. Something like:
>
> ---------8<------------------
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 27f8c42..ef934ac 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1837,7 +1837,8 @@ struct clk *__clk_register(struct device *dev,
> struct clk_hw *hw)
> }
> EXPORT_SYMBOL_GPL(__clk_register);
>
> -static int _clk_register(struct device *dev, struct clk_hw *hw, struct
> clk *clk)
> +static int _clk_register(struct device *dev, struct clk_hw *hw, struct
> clk *clk,
> + struct module *owner)
> {
> int i, ret;
>
> @@ -1877,6 +1878,8 @@ static int _clk_register(struct device *dev,
> struct clk_hw *hw, struct clk *clk)
> }
> }
>
> + clk->owner = owner;
> +
> ret = __clk_init(dev, clk);
> if (!ret)
> return 0;
> @@ -1892,7 +1895,7 @@ fail_name:
> }
>
> /**
> - * clk_register - allocate a new clock, register it and return an
> opaque cookie
> + * ___clk_register - allocate a new clock, register it and return an
> opaque cookie
> * @dev: device that is registering this clock
> * @hw: link to hardware-specific clock data
> *
> @@ -1902,7 +1905,8 @@ fail_name:
> * rest of the clock API. In the event of an error clk_register will
> return an
> * error code; drivers must test for an error code after calling
> clk_register.
> */
> -struct clk *clk_register(struct device *dev, struct clk_hw *hw)
> +struct clk *___clk_register(struct device *dev, struct clk_hw *hw,
> + struct module *owner)
> {
> int ret;
> struct clk *clk;
> @@ -1914,7 +1918,7 @@ struct clk *clk_register(struct device *dev,
> struct clk_hw *hw)
> goto fail_out;
> }
>
> - ret = _clk_register(dev, hw, clk);
> + ret = _clk_register(dev, hw, clk, owner);
> if (!ret)
> return clk;
>
> @@ -1922,7 +1926,7 @@ struct clk *clk_register(struct device *dev,
> struct clk_hw *hw)
> fail_out:
> return ERR_PTR(ret);
> }
> -EXPORT_SYMBOL_GPL(clk_register);
> +EXPORT_SYMBOL_GPL(___clk_register);
>
> /*
> * Free memory allocated for a clock.
> @@ -2040,7 +2044,8 @@ static void devm_clk_release(struct device *dev,
> void *res)
> * automatically clk_unregister()ed on driver detach. See
> clk_register() for
> * more information.
> */
> -struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw)
> +struct clk *__devm_clk_register(struct device *dev, struct clk_hw *hw,
> + struct module *owner)
> {
> struct clk *clk;
> int ret;
> @@ -2049,7 +2054,7 @@ struct clk *devm_clk_register(struct device *dev,
> struct clk_hw *hw)
> if (!clk)
> return ERR_PTR(-ENOMEM);
>
> - ret = _clk_register(dev, hw, clk);
> + ret = _clk_register(dev, hw, clk, owner);
> if (!ret) {
> devres_add(dev, clk);
> } else {
> @@ -2059,7 +2064,7 @@ struct clk *devm_clk_register(struct device *dev,
> struct clk_hw *hw)
>
> return clk;
> }
> -EXPORT_SYMBOL_GPL(devm_clk_register);
> +EXPORT_SYMBOL_GPL(__devm_clk_register);
>
> static int devm_clk_match(struct device *dev, void *res, void *data)
> {
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 13623f3..c656ebf 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -31,6 +31,7 @@
> #define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate
> change */
>
> struct clk_hw;
> +struct module;
>
> /**
> * struct clk_ops - Callback operations for hardware clocks; these are to
> @@ -436,8 +437,21 @@ struct clk *clk_register_composite(struct device
> *dev, const char *name,
> * rest of the clock API. In the event of an error clk_register will
> return an
> * error code; drivers must test for an error code after calling
> clk_register.
> */
> -struct clk *clk_register(struct device *dev, struct clk_hw *hw);
> -struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
> +struct clk *___clk_register(struct device *dev, struct clk_hw *hw,
> + struct module *owner);
> +
> +static inline struct clk *clk_register(struct device *dev, struct
> clk_hw *hw)
> +{
> + return ___clk_register(dev, hw, THIS_MODULE);
> +}
> +
> +struct clk *__devm_clk_register(struct device *dev, struct clk_hw *hw,
> + struct module *owner);
> +static inline struct clk *devm_clk_register(struct device *dev,
> + struct clk_hw *hw)
> +{
> + return __devm_clk_register(dev, hw, THIS_MODULE);
> +}
>
> void clk_unregister(struct clk *clk);
> void devm_clk_unregister(struct device *dev, struct clk *clk);
>
> ---------8<------------------
>
> Similarly it would need to be done for the remaining clk_register*()
> functions,
> which have much longer arguments list.
>
> It's a bit messy, since there is already __clk_register() function with
> double
> underscore prefix. Perhaps that could be renamed to something else so
> all the
> functions taking struct module * parameter are prefixed with double
> underscore.
>
>
> I would squash patches 3/5 and 4/5 in the next iteration, if it is decided
> to keep using dev->driver->owner.
>
> --
> Thanks,
> Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists