| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA6KcBBPEc4abvJthxv_LzwBGWwiwE=2Tmamndhgq2B_3GHfRA@mail.gmail.com> Date: Thu, 3 Oct 2013 16:57:33 -0700 From: Matthew Dharm <mdharm-usb@...-eyed-alien.net> To: Ron Brickle <rb19495@...il.com> Cc: Larry Finger <Larry.Finger@...inger.net>, USB Mass Storage on Linux <usb-storage@...ts.one-eyed-alien.net>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org> Subject: Re: [usb-storage] Re: [opensuse-factory] huawei usb dongle e173 not working on tumbleweed Ron -- We're going to need the version numbers of both the kernel and the usb_modeswitch utility from both openSUSE 12.3 and Tumbleweed if we're going to make any sense of the situation. Matt On Thu, Oct 3, 2013 at 4:50 PM, Ron Brickle <rb19495@...il.com> wrote: > On Thu, 2013-10-03 at 12:07 -0500, Larry Finger wrote: >> On 10/03/2013 02:13 AM, Ron Brickle wrote: >> > On Wed, 2013-10-02 at 22:56 -0500, Larry Finger wrote: >> >> On 10/02/2013 09:02 PM, Ron Brickle wrote: >> >>> Hi I have been trying to get my huawei usb dongle working on Tumbleweed >> >>> but to no avail so in desperation I am sending this email. it works >> >>> fine on 12.3 opensuse so hopefully you can fix this problem I tried to >> >>> get it working from help from the tumbleweed forum it is recognized in >> >>> lsusb but doesn show in network-manager >> >>> regards and thanks Ron Brickle >> >> >> >> Firmware? >> >> >> >> A device present in lsusb only means that it is connected to the USB system. For >> >> NM to have it, any firmware must be present, the wifi-enable switch for *ALL* >> >> devices must be on, the device must be recognized by some driver, and that >> >> driver must load and initialize correctly. From the information you provided, it >> >> is impossible to tell where it is failing. >> >> >> >> Larry >> >> >> >> Hi i just put this in terminal as normal user then as root >> > >> > rpm -ql usb_modeswitch-data|grep 1446 >> > it returns no answer and it should be this I am told if so the driver >> > isnt installed for this usb modem TargetVendor= 0x12d1 >> > TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" >> > >> > MessageContent="55534243123456780000000000000011062000000100000000000000000000" >> > is this any help >> > regards ron >> > lsusb gives thisron@...ktop:~> rpm -ql usb_modeswitch-data|grep 1446 >> > ron@...ktop:~> lsusb >> > Bus 001 Device 002: ID 8087:8008 Intel Corp. >> > Bus 002 Device 002: ID 8087:8000 Intel Corp. >> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> > Bus 001 Device 003: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 >> > Bus 002 Device 003: ID 174c:2074 ASMedia Technology Inc. >> > Bus 002 Device 004: ID 2109:2812 >> > Bus 002 Device 007: ID 12d1:1446 Huawei Technologies Co., Ltd. >> > E1552/E1800/E173 (HSPA modem) >> > Bus 002 Device 005: ID 046d:c526 Logitech, Inc. Nano Receiver >> > Bus 002 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver >> > and usb-devices gives this >> > Bus=02 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 >> > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 >> > P: Vendor=12d1 ProdID=1446 Rev=00.00 >> > S: Manufacturer=HUAWEI Technology >> > S: Product=HUAWEI Mobile >> > C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA >> > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 >> > Driver=usb-storage >> > I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 >> > Driver=usb-storage >> > thanks for your reply regards ron >> >> From the usb-devices output, the device obviously needs to be mode switched. >> >> There may be a regression from the openSUSE 12.3 kernel (probably 3.7) to the >> one used by Tumbleweed. The usb-storage drivers are maintinaed by Matthew Dharm >> <mdharm-usb@...-eyed-alien.net>. I suggest you contact him with a Cc to >> linux-usb@...r.kernel.org, usb-storage@...ts.one-eyed-alien.net, and >> linux-kernel@...r.kernel.org and and state your problem, that it worked in >> kernel 3.7, but fails in the kernel 3.XX with the XX replaced by the version >> returned by 'uname -r'. >> >> Larry >> >> > > > -- > You received this message because you are subscribed to the Google Groups "USB Mass Storage on Linux" group. > To unsubscribe from this group and stop receiving emails from it, send an email to usb-storage+unsubscribe@...ts.one-eyed-alien.net. > To post to this group, send email to usb-storage@...ts.one-eyed-alien.net. > Visit this group at http://groups.google.com/a/lists.one-eyed-alien.net/group/usb-storage/. > For more options, visit https://groups.google.com/a/lists.one-eyed-alien.net/groups/opt_out. -- Matthew Dharm Maintainer, USB Mass Storage driver for Linux -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists