[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.12.0-rc2-00154-g12c6060 (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-8) ) #3 PREEMPT Tue Sep 24 07:59:40 CST 2013 [ 0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c8-0924/devel-cairo-x86_64-201309240752/.vmlinuz-12c6060d1380098bb69fad0c26200557d0763355-20130924080006-9-ant branch=linux-devel/devel-cairo-x86_64-201309240752 BOOT_IMAGE=/kernel/x86_64-randconfig-c8-0924/12c6060d1380098bb69fad0c26200557d0763355/vmlinuz-3.12.0-rc2-00154-g12c6060 noapic nolapic nohz=off [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [ffff8800000fdab0] [ 0.000000] mpc: fdac0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02892000, 0x02892fff] PGTABLE [ 0.000000] BRK [0x02893000, 0x02893fff] PGTABLE [ 0.000000] BRK [0x02894000, 0x02894fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff] [ 0.000000] [mem 0x0e600000-0x0e7fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff] [ 0.000000] [mem 0x0c000000-0x0e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff] [ 0.000000] [mem 0x0e800000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x02895000, 0x02895fff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 127328(97%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 00040 [ 0.000000] ACPI: SSDT 000000000ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] [ffffea0000000000-ffffea00003fffff] PMD -> [ffff88000d400000-ffff88000d7fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 61438 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] mpc: fdac0-fdbe4 [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is ISA [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 09 [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 10, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 14, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 18, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 1c, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 20, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 24, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 28, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 1 [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x10000000-0xfffbffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64391 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c8-0924/devel-cairo-x86_64-201309240752/.vmlinuz-12c6060d1380098bb69fad0c26200557d0763355-20130924080006-9-ant branch=linux-devel/devel-cairo-x86_64-201309240752 BOOT_IMAGE=/kernel/x86_64-randconfig-c8-0924/12c6060d1380098bb69fad0c26200557d0763355/vmlinuz-3.12.0-rc2-00154-g12c6060 noapic nolapic nohz=off [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 199380K/261744K available (7567K kernel code, 2906K rwdata, 2968K rodata, 804K init, 10896K bss, 62364K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] ODEBUG: 4 of 4 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3191.927 MHz processor [ 0.011000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.85 BogoMIPS (lpj=3191927) [ 0.012426] pid_max: default: 32768 minimum: 301 [ 0.029855] Mount-cache hash table entries: 256 [ 0.143260] Initializing cgroup subsys debug [ 0.147443] Initializing cgroup subsys devices [ 0.150293] Initializing cgroup subsys perf_event [ 0.167436] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.167436] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.167436] tlb_flushall_shift: -1 [ 0.168305] CPU: AMD QEMU Virtual CPU version 1.6.0 (fam: 06, model: 02, stepping: 03) [ 0.245000] ACPI: Core revision 20130823 [ 0.559362] ACPI: All ACPI Tables successfully acquired [ 0.562530] ACPI: setting ELCR to 0200 (from 0c00) [ 0.629805] Performance Events: [ 0.632379] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.633230] no hardware sampling interrupt available. [ 0.636411] Broken PMU hardware detected, using software events only. [ 0.637255] Failed to access perfctr msr (MSR c0010004 is 0) [ 0.772435] Apic disabled [ 0.782333] NMI watchdog: disabled (cpu0): hardware events not enabled [ 1.120816] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 1.168489] regulator-dummy: no parameters [ 1.206306] NET: Registered protocol family 16 [ 1.269598] cpuidle: using governor ladder [ 1.272419] cpuidle: using governor menu [ 1.292314] ACPI: bus type PCI registered [ 1.297358] PCI: Using configuration type 1 for base access [ 4.525792] bio: create slab at 0 [ 4.635276] ACPI: Added _OSI(Module Device) [ 4.638502] ACPI: Added _OSI(Processor Device) [ 4.639398] ACPI: Added _OSI(3.0 _SCP Extensions) [ 4.642399] ACPI: Added _OSI(Processor Aggregator Device) [ 5.672414] ACPI: EC: Look up EC in DSDT [ 8.032361] ACPI: Interpreter enabled [ 8.052334] ACPI: (supports S0 S4 S5) [ 8.055280] ACPI: Using PIC for interrupt routing [ 8.071733] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 11.827000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 11.829930] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 11.924758] PCI host bridge to bus 0000:00 [ 11.927571] pci_bus 0000:00: root bus resource [bus 00-ff] [ 11.930452] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 11.932281] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 11.934328] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 11.935189] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 11.943482] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 12.038199] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 12.124189] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 12.151354] pci 0000:00:01.1: reg 0x20: [io 0xc1e0-0xc1ef] [ 12.232439] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 12.247830] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 12.249196] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 12.326362] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 12.333379] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 12.337560] pci 0000:00:02.0: reg 0x14: [mem 0xfebe0000-0xfebe0fff] [ 12.356350] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 12.431190] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 12.438252] pci 0000:00:03.0: reg 0x10: [io 0xc1c0-0xc1df] [ 12.443328] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff] [ 12.475335] pci 0000:00:03.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref] [ 12.554215] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 12.561269] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff] [ 12.567280] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f] [ 12.587288] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref] [ 12.661682] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 12.670793] pci 0000:00:05.0: reg 0x10: [io 0xc040-0xc07f] [ 12.675253] pci 0000:00:05.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff] [ 12.767431] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 12.774277] pci 0000:00:06.0: reg 0x10: [io 0xc080-0xc0bf] [ 12.779334] pci 0000:00:06.0: reg 0x14: [mem 0xfebe3000-0xfebe3fff] [ 12.894319] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 12.902361] pci 0000:00:07.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 12.916345] pci 0000:00:07.0: reg 0x14: [mem 0xfebe4000-0xfebe4fff] [ 13.080573] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 13.093371] pci 0000:00:08.0: reg 0x10: [io 0xc100-0xc13f] [ 13.104319] pci 0000:00:08.0: reg 0x14: [mem 0xfebe5000-0xfebe5fff] [ 13.269746] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 13.284395] pci 0000:00:09.0: reg 0x10: [io 0xc140-0xc17f] [ 13.292357] pci 0000:00:09.0: reg 0x14: [mem 0xfebe6000-0xfebe6fff] [ 13.454460] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 13.469372] pci 0000:00:0a.0: reg 0x10: [io 0xc180-0xc1bf] [ 13.483313] pci 0000:00:0a.0: reg 0x14: [mem 0xfebe7000-0xfebe7fff] [ 13.671348] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 13.683547] pci 0000:00:0b.0: reg 0x10: [mem 0xfebe8000-0xfebe800f] [ 13.860268] pci_bus 0000:00: on NUMA node 0 [ 14.249382] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 14.315279] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 14.373401] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 14.429315] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 14.463301] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 14.677000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 14.683343] ACPI: \_SB_.PCI0: notify handler is installed [ 14.737394] Found 1 acpi root devices [ 14.850000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 14.853550] vgaarb: loaded [ 14.855381] vgaarb: bridge control possible 0000:00:02.0 [ 14.911282] ACPI: bus type USB registered [ 14.925539] usbcore: registered new interface driver usbfs [ 14.934427] usbcore: registered new interface driver hub [ 14.950565] usbcore: registered new device driver usb [ 14.990300] pps_core: LinuxPPS API ver. 1 registered [ 14.992475] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 14.997405] PTP clock support registered [ 15.010221] EDAC MC: Ver: 3.0.0 [ 15.045421] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 17.041811] Advanced Linux Sound Architecture Driver Initialized. [ 17.042344] PCI: Using ACPI for IRQ routing [ 17.046207] PCI: pci_cache_line_size set to 64 bytes [ 17.060875] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 17.062645] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 17.163353] Switched to clocksource hpet [ 17.194346] FS-Cache: Loaded [ 17.203252] CacheFiles: Loaded [ 17.214180] pnp: PnP ACPI init [ 17.219351] ACPI: bus type PNP registered [ 17.253337] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 17.270162] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 17.288284] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 17.304155] pnp 00:03: [dma 2] [ 17.314029] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 17.335377] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 17.360270] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 17.472266] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 17.526716] pnp: PnP ACPI: found 7 devices [ 17.529228] ACPI: bus type PNP unregistered [ 17.999246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 18.003147] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 18.005142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 18.007682] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 18.017384] NET: Registered protocol family 1 [ 18.024521] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 18.027298] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 18.033494] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 18.038227] pci 0000:00:02.0: Boot video device [ 18.045295] PCI: CLS 0 bytes, default 64 [ 18.142364] Unpacking initramfs... [ 166.852441] Freeing initrd memory: 23656K (ffff88000e8d6000 - ffff88000fff0000) [ 167.703715] PCLMULQDQ-NI instructions are not detected. [ 167.707113] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 167.711478] AVX or AES-NI instructions are not detected. [ 167.718356] AVX instructions are not detected. [ 167.722155] AVX instructions are not detected. [ 167.724103] AVX instructions are not detected. [ 167.725394] AVX instructions are not detected. [ 167.911182] tsc: Refined TSC clocksource calibration: 3191.889 MHz [ 167.920661] Switched to clocksource tsc [ 169.108276] zbud: loaded [ 169.285373] VFS: Disk quotas dquot_6.5.2 [ 169.329288] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 170.052349] NTFS driver 2.1.30 [Flags: R/W]. [ 170.145396] fuse init (API version 7.22) [ 170.328266] JFS: nTxBlock = 1742, nTxLock = 13939 [ 170.549415] SGI XFS with security attributes, large block/inode numbers, debug enabled [ 171.009441] NILFS version 2 loaded [ 171.998491] GFS2 installed [ 172.003268] msgmni has been set to 435 [ 172.868281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 172.871099] io scheduler noop registered [ 172.872391] io scheduler deadline registered (default) [ 172.876355] io scheduler cfq registered [ 172.931132] xz_dec_test: module loaded [ 172.932384] xz_dec_test: Create a device node with 'mknod xz_dec_test c 249 0' and write .xz files to it. [ 172.934104] rbtree testing -> 759395 cycles [ 198.225405] augmented rbtree testing -> 1198977 cycles [ 239.068233] no IO addresses supplied [ 239.138180] ipmi message handler version 39.2 [ 239.152397] ipmi device interface [ 239.177113] IPMI System Interface driver. [ 239.207183] ipmi_si: Adding default-specified kcs state machine [ 239.211244] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 239.219210] ipmi_si: Interface detection failed [ 239.240207] ipmi_si: Adding default-specified smic state machine [ 239.243352] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 239.257283] ipmi_si: Interface detection failed [ 239.263398] ipmi_si: Adding default-specified bt state machine [ 239.267152] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 239.273295] ipmi_si: Interface detection failed [ 239.315223] ipmi_si: Unable to find any System Interface(s) [ 239.317603] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 239.395171] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 239.409250] ACPI: Power Button [PWRF] [ 247.970237] [sched_delayed] sched: RT throttling activated [ 254.565382] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 254.581353] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 254.719242] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 254.924572] STMicroelectronics ASC driver initialized [ 254.962139] serial: Freescale lpuart driver [ 255.023301] Non-volatile memory driver v1.3 [ 255.129385] smapi::smapi_init, ERROR invalid usSmapiID [ 255.132124] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 255.137359] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 255.143243] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 255.157271] SyncLink PC Card driver $Revision: 4.34 $, tty major#244 [ 255.170299] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 255.175243] Hangcheck: Using getrawmonotonic(). [ 255.194593] [drm] Initialized drm 1.1.0 20060810 [ 255.204093] usbcore: registered new interface driver udl [ 255.228255] dummy-irq: no IRQ given. Use irq=N [ 255.335383] usbcore: registered new interface driver viperboard [ 255.406358] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 255.441296] platform physmap-flash.0: failed to claim resource 0 [ 255.473116] slram: not enough parameters. [ 255.618347] ftl_cs: FTL header not found. [ 255.856364] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 255.864346] ehci-pci: EHCI PCI platform driver [ 255.887241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 255.890213] ohci-pci: OHCI PCI platform driver [ 255.911343] ohci-platform: OHCI generic platform driver [ 255.958197] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 255.961135] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 255.981553] usbcore: registered new interface driver usblp [ 255.990229] usbcore: registered new interface driver cdc_wdm [ 255.998589] usbcore: registered new interface driver usbtmc [ 256.012213] usbcore: registered new interface driver mdc800 [ 256.015172] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 256.045346] usbcore: registered new interface driver usbserial [ 256.054345] usbcore: registered new interface driver usbserial_generic [ 256.075271] usbserial: USB Serial support registered for generic [ 256.084093] usbcore: registered new interface driver ark3116 [ 256.094199] usbserial: USB Serial support registered for ark3116 [ 256.102289] usbcore: registered new interface driver belkin_sa [ 256.113265] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 256.130583] usbcore: registered new interface driver ch341 [ 256.146246] usbserial: USB Serial support registered for ch341-uart [ 256.155167] usbcore: registered new interface driver cyberjack [ 256.164098] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 256.182363] usbcore: registered new interface driver cypress_m8 [ 256.199247] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 256.231203] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 256.264179] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 256.280583] usbcore: registered new interface driver usb_debug [ 256.304156] usbserial: USB Serial support registered for debug [ 256.313106] usbcore: registered new interface driver digi_acceleport [ 256.322120] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 256.335093] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 256.352380] usbcore: registered new interface driver empeg [ 256.367278] usbserial: USB Serial support registered for empeg [ 256.375553] usbcore: registered new interface driver ftdi_sio [ 256.393266] usbserial: USB Serial support registered for FTDI USB Serial Device [ 256.402263] usbcore: registered new interface driver ipw [ 256.411270] usbserial: USB Serial support registered for IPWireless converter [ 256.426247] usbcore: registered new interface driver ir_usb [ 256.436196] usbserial: USB Serial support registered for IR Dongle [ 256.445155] usbcore: registered new interface driver iuu_phoenix [ 256.454198] usbserial: USB Serial support registered for iuu_phoenix [ 256.463174] usbcore: registered new interface driver keyspan [ 256.472274] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 256.484244] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 256.493565] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 256.504246] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 256.530360] usbcore: registered new interface driver mct_u232 [ 256.553115] usbserial: USB Serial support registered for MCT U232 [ 256.561560] usbcore: registered new interface driver mos7720 [ 256.570248] usbserial: USB Serial support registered for Moschip 2 port adapter [ 256.585122] usbcore: registered new interface driver mos7840 [ 256.594181] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 256.605359] usbcore: registered new interface driver navman [ 256.613573] usbserial: USB Serial support registered for navman [ 256.628591] usbcore: registered new interface driver omninet [ 256.643151] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 256.669176] usbcore: registered new interface driver option [ 256.677346] usbserial: USB Serial support registered for GSM modem (1-port) [ 256.698556] usbcore: registered new interface driver pl2303 [ 256.711595] usbserial: USB Serial support registered for pl2303 [ 256.725332] usbcore: registered new interface driver qcaux [ 256.734378] usbserial: USB Serial support registered for qcaux [ 256.752375] usbcore: registered new interface driver quatech2 [ 256.772592] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver [ 256.781272] usbcore: registered new interface driver safe_serial [ 256.791332] usbserial: USB Serial support registered for safe_serial [ 256.809203] usbcore: registered new interface driver sierra [ 256.817267] usbserial: USB Serial support registered for Sierra USB modem [ 256.831558] usbcore: registered new interface driver usb_serial_simple [ 256.846122] usbserial: USB Serial support registered for zio [ 256.854569] usbserial: USB Serial support registered for funsoft [ 256.875384] usbserial: USB Serial support registered for flashloader [ 256.893357] usbserial: USB Serial support registered for vivopay [ 256.914596] usbserial: USB Serial support registered for moto_modem [ 256.929572] usbserial: USB Serial support registered for hp4x [ 256.949273] usbserial: USB Serial support registered for suunto [ 256.958357] usbserial: USB Serial support registered for siemens_mpi [ 256.975354] usbcore: registered new interface driver spcp8x5 [ 256.985202] usbserial: USB Serial support registered for SPCP8x5 [ 256.994591] usbcore: registered new interface driver visor [ 257.013353] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 257.026221] usbserial: USB Serial support registered for Sony Clie 5.0 [ 257.041189] usbserial: USB Serial support registered for Sony Clie 3.5 [ 257.050220] usbcore: registered new interface driver xsens_mt [ 257.058336] usbserial: USB Serial support registered for xsens_mt [ 257.067376] usbcore: registered new interface driver zte_ev [ 257.076552] usbserial: USB Serial support registered for zte_ev [ 257.092289] usbcore: registered new interface driver adutux [ 257.101249] usbcore: registered new interface driver cypress_cy7c63 [ 257.110181] usbcore: registered new interface driver cytherm [ 257.119201] usbcore: registered new interface driver emi26 - firmware loader [ 257.149587] usbcore: registered new interface driver emi62 - firmware loader [ 257.154247] driver ftdi-elan [ 257.204088] usbcore: registered new interface driver ftdi-elan [ 257.221302] usbcore: registered new interface driver idmouse [ 257.230374] usbcore: registered new interface driver usblcd [ 257.239554] usbcore: registered new interface driver usbled [ 257.255363] usbcore: registered new interface driver legousbtower [ 257.270215] usbcore: registered new interface driver rio500 [ 257.280229] usbcore: registered new interface driver usb_ehset_test [ 257.290208] usbcore: registered new interface driver trancevibrator [ 257.300279] usbcore: registered new interface driver usbsevseg [ 257.477263] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 257.490204] dummy_hcd dummy_hcd.0: Dummy host controller [ 257.512288] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 257.647195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 257.655127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 257.666153] usb usb1: Product: Dummy host controller [ 257.669558] usb usb1: Manufacturer: Linux 3.12.0-rc2-00154-g12c6060 dummy_hcd [ 257.676368] usb usb1: SerialNumber: dummy_hcd.0 [ 257.896601] hub 1-0:1.0: USB hub found [ 265.380163] hub 1-0:1.0: 1 port detected [ 265.698335] udc dummy_udc.0: registering UDC driver [g_audio] [ 265.713267] g_audio gadget: adding config #1 'Linux USB Audio Gadget'/ffffffff81cafa80 [ 265.750597] g_audio gadget: unable to open sound control device file: /dev/snd/controlC0 [ 265.766217] g_audio gadget: we need at least one control device [ 265.770028] g_audio gadget: cfg 1/ffffffff81cafa80 speeds: [ 265.782278] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012 [ 265.789182] g_audio gadget: g_audio ready [ 265.799105] dummy_udc dummy_udc.0: binding gadget driver 'g_audio' [ 265.814292] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 265.829337] dummy_hcd dummy_hcd.0: port status 0x00010101 has changes [ 265.897126] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 266.051613] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 266.065271] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 266.100796] g_audio gadget: resume [ 266.119225] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 266.215117] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 266.296283] mousedev: PS/2 mouse device common for all mice [ 266.310611] g_audio gadget: resume [ 266.315342] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 266.341208] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 266.390253] dummy_udc dummy_udc.0: set_address = 2 [ 266.478500] usb 1-1: no configurations [ 266.481989] usb 1-1: can't read configurations, error -22 [ 266.486113] g_audio gadget: suspend [ 266.520970] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 266.537210] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 266.553203] g_audio gadget: resume [ 266.554191] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 266.567254] mk712: device not present [ 266.570524] usbcore: registered new interface driver usbtouchscreen [ 266.602510] rtc_cmos 00:00: RTC can wake from S4 [ 266.609855] usb 1-1: new high-speed USB device number 3 using dummy_hcd [ 266.621015] rtc (null): alarm rollover: day [ 266.630096] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 266.634971] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 266.665204] g_audio gadget: resume [ 266.666281] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 266.703053] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 266.717290] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 266.726903] dummy_udc dummy_udc.0: set_address = 3 [ 266.744295] usb 1-1: no configurations [ 266.758281] usb 1-1: can't read configurations, error -22 [ 266.769364] g_audio gadget: suspend [ 266.772330] i2c /dev entries driver [ 266.814400] i2c-parport-light: adapter type unspecified [ 266.823434] usbcore: registered new interface driver i2c-tiny-usb [ 266.847327] pps pps0: new PPS source ktimer [ 266.852153] pps pps0: ktimer PPS source registered [ 266.855252] Driver for 1-wire Dallas network protocol. [ 266.864243] g_audio gadget: resume [ 266.867226] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 266.887280] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 266.907205] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 266.944390] usb 1-1: new high-speed USB device number 4 using dummy_hcd [ 266.951899] dummy_udc dummy_udc.0: set_address = 4 [ 266.991289] usb 1-1: no configurations [ 266.994654] usb 1-1: can't read configurations, error -22 [ 266.996296] g_audio gadget: suspend [ 267.067318] g_audio gadget: resume [ 267.073354] dummy_hcd dummy_hcd.0: port status 0x00100503 has changes [ 267.138290] usb 1-1: new high-speed USB device number 5 using dummy_hcd [ 267.144177] dummy_udc dummy_udc.0: set_address = 5 [ 267.182202] f71882fg: Not a Fintek device [ 267.186206] usb 1-1: no configurations [ 267.187902] usb 1-1: can't read configurations, error -22 [ 267.191198] f71882fg: Not a Fintek device [ 267.195398] g_audio gadget: suspend [ 267.205257] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 267.362042] sch56xx_common: Unsupported device id: 0xff [ 267.363382] sch56xx_common: Unsupported device id: 0xff [ 267.382939] usbcore: registered new interface driver pcwd_usb [ 267.384047] acquirewdt: WDT driver for Acquire single board computer initialising [ 267.396035] acquirewdt: I/O address 0x0043 already in use [ 267.397993] acquirewdt: probe of acquirewdt failed with error -5 [ 267.403138] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=1) [ 267.404887] ib700wdt: WDT driver for IB700 single board computer initialising [ 267.416357] ib700wdt: failed to register misc device [ 267.418254] ib700wdt: probe of ib700wdt failed with error -16 [ 267.420029] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 267.422076] wafer5823wdt: cannot register miscdev on minor=130 (err=-16) [ 267.425980] sc1200wdt: build 20020303 [ 267.428287] sc1200wdt: io parameter must be specified [ 267.431204] pc87413_wdt: Version 1.1 at io 0x2E [ 267.432523] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 267.435017] sbc60xxwdt: cannot register miscdev on minor=130 (err=-16) [ 267.436960] sbc8360: failed to register misc device [ 267.438794] cpu5wdt: misc_register failed [ 267.439495] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 267.441021] w83697ug_wdt: No W83697UG/UF could be found [ 267.442984] w83877f_wdt: cannot register miscdev on minor=130 (err=-16) [ 267.444343] w83977f_wdt: driver v1.00 [ 267.446068] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 267.447945] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 267.455906] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 267.457356] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 267.474798] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) [ 267.494000] sdhci: Secure Digital Host Controller Interface driver [ 267.497554] sdhci: Copyright(c) Pierre Ossman [ 267.499025] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 267.529525] usbcore: registered new interface driver vub300 [ 267.535523] usbcore: registered new interface driver ushc [ 267.537083] sdhci-pltfm: SDHCI platform and OF driver helper [ 267.602219] ledtrig-cpu: registered to indicate activity on CPUs [ 267.656654] BUG: unable to handle kernel NULL pointer dereference at 0000000000000248 [ 267.656689] IP: [] dma_supported+0x9/0xa0 [ 267.656689] PGD 0 [ 267.656689] Oops: 0000 [#1] PREEMPT [ 267.656689] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-00154-g12c6060 #3 [ 267.656689] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 267.656689] task: ffff88000d868000 ti: ffff88000d864000 task.ti: ffff88000d864000 [ 267.656689] RIP: 0010:[] [] dma_supported+0x9/0xa0 [ 267.656689] RSP: 0000:ffff88000d865cb0 EFLAGS: 00000202 [ 267.656689] RAX: ffffffff814c0b90 RBX: 00000000fffffffb RCX: 0000000000000001 [ 267.656689] RDX: 0000000000000780 RSI: 00000000ffffffff RDI: 0000000000000010 [ 267.656689] RBP: ffff88000d865cb0 R08: 0000000000000001 R09: 0000000000000001 [ 267.656689] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 267.656689] R13: ffff88000f5eb400 R14: ffffffff81c85240 R15: 0000000000000000 [ 267.656689] FS: 0000000000000000(0000) GS:ffffffff81a6b000(0000) knlGS:0000000000000000 [ 267.656689] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 267.656689] CR2: 0000000000000248 CR3: 0000000001a5c000 CR4: 00000000000006b0 [ 267.656689] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 267.656689] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 267.656689] Stack: [ 267.656689] ffff88000d865cd8 ffffffff816878d6 ffff88000f5eb410 ffffffff81d00128 [ 267.656689] ffff88000f5eb400 ffff88000d865d08 ffffffff814c0bce ffffffff814bf06e [ 267.656689] ffff88000f5eb410 ffff88000f5eb410 ffffffff81d00128 ffff88000d865d30 [ 267.656689] Call Trace: [ 267.656689] [] dcdbas_probe+0x46/0xb0 [ 267.656689] [] platform_drv_probe+0x3e/0x70 [ 267.656689] [] ? driver_sysfs_add+0x6e/0xa0 [ 267.656689] [] really_probe+0xc5/0x1e0 [ 267.656689] [] ? driver_probe_device+0x20/0x20 [ 267.656689] [] __device_attach+0x55/0x70 [ 267.656689] [] bus_for_each_drv+0x5e/0xb0 [ 267.656689] [] device_attach+0x78/0x90 [ 267.656689] [] bus_probe_device+0x35/0xd0 [ 267.656689] [] device_add+0x4ad/0x720 [ 267.656689] [] platform_device_add+0x180/0x210 [ 267.656689] [] platform_device_register_full+0xb0/0x110 [ 267.656689] [] ? dcdrbu_init+0x15a/0x15a [ 267.656689] [] dcdbas_init+0x26/0x51 [ 267.656689] [] do_one_initcall+0x7d/0x115 [ 267.656689] [] kernel_init_freeable+0x143/0x1cf [ 267.656689] [] ? do_early_param+0x8a/0x8a [ 267.656689] [] ? rest_init+0xc0/0xc0 [ 267.656689] [] kernel_init+0x9/0x170 [ 267.656689] [] ret_from_fork+0x7a/0xb0 [ 267.656689] [] ? rest_init+0xc0/0xc0 [ 267.656689] Code: 0c 48 0f bd c6 8d 70 01 e8 05 24 0f 00 48 8b 5d f0 4c 8b 65 f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 85 ff 48 89 e5 74 0c <48> 8b 87 38 02 00 00 48 85 c0 75 0b 48 8b 05 3c e0 a5 00 0f 1f [ 267.656689] RIP [] dma_supported+0x9/0xa0 [ 267.656689] RSP [ 267.656689] CR2: 0000000000000248 [ 267.751209] ---[ end trace a1914743e6b14bdd ]--- [ 267.753573] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 267.753573] [ 267.753573] Rebooting in 10 seconds.. BUG: kernel boot oops Elapsed time: 285 qemu-system-x86_64 -kernel /kernel/x86_64-randconfig-c8-0924/12c6060d1380098bb69fad0c26200557d0763355/vmlinuz-3.12.0-rc2-00154-g12c6060 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c8-0924/devel-cairo-x86_64-201309240752/.vmlinuz-12c6060d1380098bb69fad0c26200557d0763355-20130924080006-9-ant branch=linux-devel/devel-cairo-x86_64-201309240752 BOOT_IMAGE=/kernel/x86_64-randconfig-c8-0924/12c6060d1380098bb69fad0c26200557d0763355/vmlinuz-3.12.0-rc2-00154-g12c6060 noapic nolapic nohz=off' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::20439-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -drive file=/fs/sdc1/disk0-ant-16343,media=disk,if=virtio -drive file=/fs/sdc1/disk1-ant-16343,media=disk,if=virtio -drive file=/fs/sdc1/disk2-ant-16343,media=disk,if=virtio -drive file=/fs/sdc1/disk3-ant-16343,media=disk,if=virtio -drive file=/fs/sdc1/disk4-ant-16343,media=disk,if=virtio -drive file=/fs/sdc1/disk5-ant-16343,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-ant-lkp-16343 -serial file:/dev/shm/kboot/serial-ant-lkp-16343 -daemonize -display none -monitor null