Message-ID: <5252CA97.6060601@ti.com>
Date:	Mon, 7 Oct 2013 10:52:07 -0400
From:	Eduardo Valentin <eduardo.valentin@...com>
To:	Wendy Ng <wendy.ng@...adcom.com>
CC:	Eduardo Valentin <eduardo.valentin@...com>,
	Mark Rutland <Mark.Rutland@....com>,
	Rob Herring <rob.herring@...xeda.com>,
	Stephen Warren <swarren@...dotorg.org>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-pm@...r.kernel.org>, Christian Daudt <bcm@...thebug.org>,
	Markus Mayer <mmayer@...adcom.com>
Subject: Re: [PATCH 1/3] thermal: bcm281xx: Add thermal driver

On 04-10-2013 18:17, Wendy Ng wrote:
> Hello Eduardo,
> 

Hello Wendy,

> I have rebased my work on the top of yours and tried out the new way of
> registering the thermal zone.    The new method is certainly making
> things easier for me to create a new thermal zone device driver.  But I
> have some questions and I hope to hear back from you before I upload my
> new patch set that is based on your changes.

Great that you gave it a shot. Thanks for that.

> 
> 1. I found that the hwmon sysfs interface is no longer created when I
> call thermal_zone_of_sensor_register() to register my thermal sensor.  I
> believe it is because you purposely hard-coded 'no_hwmon' to true.  
> Would it be possible to let the users to control this option as part of
> the sensor register function?

Hmmm.. I also thought of allowing the thermal to hwmon interface
configurable. But the interface gets created in different path from the
sensor registration, which makes things a bit harder. The zones are
probed while parsing the DT file. While the sensors get linked,
thermal_zone_of_sensor_register(), typically when sensors are probed.

Do you have a real use case for using the thermal to hwmon interface?
Durgadoss (original author) and Rui were considering deprecating and
finally removing it. If yes, it is time to rise your voice here.

> 
> 2. The of_thermal_get_temp() output parameter 'temp' is an unsigned
> value in order to conforms with the thermal framework 'get_temp'
> function prototype.  But the new sensor interface 'get_temp' callback
> function (defined in __thermal_zone struct) expects 'temp' to be
> signed.  So technically, a negative value can be returned from the
> underlying sensor function.  Should some checks be added to
> of_thermal_get_temp() to ensure that a negative value (i.e. a very large
> unsigned value) won't be passed back to the thermal framework?  Or
> should the 'get_temp' function prototype in __thermal_zone struct be
> changed with 'unsigned' temperature value and it will be the
> responsibility of the underlying function to do the check?
> 

I could for sure, add a warning inside of_thermal_get_temp(). But in
general, I believe the thermal framework has to cover for signed
temperature values, even if typical usage is on positive temperature
range. Mainly for correct temperature representation.


> 3. Your documentation (thermal.txt) seems to suggest that the
> 'cooling-attachments' are one of the required properties for
> 'thermal-zones' node in the device tree binding files.  However, I don't

Hmm... That was not the intention.

> have any cooling device ready in my current patch series yet and
> therefore I tried to leave out the 'cooling-attachments' node from the
> 'thermal-zones' node.  It seems to be working just find and I can
> register the sensor and read out the temperature once the target
> platform has been booted up.  Is this your expectation that people can
> leave the 'cooling-attachments' node out?    I want to make sure I can
> still submit a new patch set for this series with just the functionality
> of reading out the temperature from the thermal sensor.

So, let me try to clarify a couple of things. First thing is that the
cooling-attachments has been renamed to cooling-maps, just a new naming
convention.  Also, there are thermal zones that do not have
cooling-maps, they just describe thermal shutdown by software, thermal
zones with only CRITICAL trip points, for instance. For this reason,
thermal zones must be probed properly without cooling-maps. I need to
double check the documentation in this case, I believe.

> 
> Thanks,
> -Wendy
> 
> On 9/23/2013 4:46 PM, Eduardo Valentin wrote:
>> On 23-09-2013 18:43, Wendy Ng wrote:
>>> On 9/23/2013 11:19 AM, Eduardo Valentin wrote:
>>>> On 23-09-2013 13:51, Wendy Ng wrote:
>>>>> This adds the support for reading out temperature from Broadcom
>>>>> bcm281xx
>>>>> SoCs.
>>>>>
>>>>> Signed-off-by: Wendy Ng <wendy.ng@...adcom.com>
>>>>> Reviewed-by: Markus Mayer <mmayer@...adcom.com>
>>>>> Reviewed-by: Christian Daudt <csd@...adcom.com>
>>>>> ---
>>>>>    .../bindings/thermal/bcm-kona-thermal.txt          |   18 +++
>>>>>    drivers/thermal/Kconfig                            |   10 ++
>>>>>    drivers/thermal/Makefile                           |    1 +
>>>>>    drivers/thermal/bcm_thermal.c                      |  170
>>>>> ++++++++++++++++++++
>>>>>    4 files changed, 199 insertions(+)
>>>>>    create mode 100644
>>>>> Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>>>>>    create mode 100644 drivers/thermal/bcm_thermal.c
>>>>>
>>>>> diff --git
>>>>> a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>>>>> b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>>>>> new file mode 100644
>>>>> index 0000000..acca99e
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>>>>> @@ -0,0 +1,18 @@
>>>>> +* Broadcom Kona Thermal Management Unit
>>>>> +
>>>>> +This version is for the BCM281xx family of SoCs.
>>>>> +
>>>>> +Required properties:
>>>>> +- compatible : "brcm,bcm11351-thermal", "brcm,kona-thermal"
>>>>> +- reg : Address range of the thermal register
>>>>> +- thermal-name: this entry must be specified and it will be passed
>>>>> into
>>>>> +thermal_zone_device_register().  This name will also be reported
>>>>> under Hwmon
>>>>> +sysfs 'name' attribute.
>>>>> +
>>>>> +Example:
>>>>> +    thermal@...08000 {
>>>>> +        compatible = "brcm,bcm11351-thermal", "brcm,kona-thermal";
>>>>> +        reg = <0x34008000 0x0024>;
>>>>> +        thermal-name = "bcm_kona_therm";
>>>>> +        status = "disabled";
>>>>> +    };
>>>>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>>>>> index dbfc390..7f823f0 100644
>>>>> --- a/drivers/thermal/Kconfig
>>>>> +++ b/drivers/thermal/Kconfig
>>>>> @@ -134,6 +134,16 @@ config KIRKWOOD_THERMAL
>>>>>          Support for the Kirkwood thermal sensor driver into the Linux
>>>>> thermal
>>>>>          framework. Only kirkwood 88F6282 and 88F6283 have this
>>>>> sensor.
>>>>>    +config BCM_THERMAL
>>>>> +    tristate "Temperature sensor on Broadcom BCM281xx family of SoCs"
>>>>> +    depends on ARCH_BCM
>>>>> +    default y
>>>>> +    help
>>>>> +      If you say yes here you get support for TMU (Thermal Management
>>>>> +      Unit) on Broadcom BCM281xx family of SoCs. This provides
>>>>> thermal
>>>>> +      monitoring of CPU clusters, graphics, and SoC glue, but does
>>>>> not
>>>>> +      include monitoring of charger temperature.
>>>>> +
>>>>>    config DOVE_THERMAL
>>>>>        tristate "Temperature sensor on Marvell Dove SoCs"
>>>>>        depends on ARCH_DOVE
>>>>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
>>>>> index 584b363..3ea8c1c 100644
>>>>> --- a/drivers/thermal/Makefile
>>>>> +++ b/drivers/thermal/Makefile
>>>>> @@ -21,6 +21,7 @@ obj-$(CONFIG_SPEAR_THERMAL)    += spear_thermal.o
>>>>>    obj-$(CONFIG_RCAR_THERMAL)    += rcar_thermal.o
>>>>>    obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
>>>>>    obj-y                += samsung/
>>>>> +obj-$(CONFIG_BCM_THERMAL)       += bcm_thermal.o
>>>>>    obj-$(CONFIG_DOVE_THERMAL)      += dove_thermal.o
>>>>>    obj-$(CONFIG_DB8500_THERMAL)    += db8500_thermal.o
>>>>>    obj-$(CONFIG_ARMADA_THERMAL)    += armada_thermal.o
>>>>> diff --git a/drivers/thermal/bcm_thermal.c
>>>>> b/drivers/thermal/bcm_thermal.c
>>>>> new file mode 100644
>>>>> index 0000000..131d3c4
>>>>> --- /dev/null
>>>>> +++ b/drivers/thermal/bcm_thermal.c
>>>>> @@ -0,0 +1,170 @@
>>>>> +/*
>>>>> + * Copyright 2013 Broadcom Corporation.
>>>>> + *
>>>>> + * This program is free software; you can redistribute it and/or
>>>>> modify
>>>>> + * it under the terms of the GNU General Public License, version 2,
>>>>> + * as published by the Free Software Foundation (the "GPL").
>>>>> + *
>>>>> + * This program is distributed in the hope that it will be useful,
>>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>>> + * GNU General Public License for more details.
>>>>> + *
>>>>> + * A copy of the GPL is available at
>>>>> http://www.broadcom.com/licenses/GPLv2.php,
>>>>> + * or by writing to the Free Software Foundation, Inc.,
>>>>> + * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
>>>>> + */
>>>>> +
>>>>> +/**
>>>>> +*  Broadcom Thermal Management Unit - bcm_tmu
>>>>> +*/
>>>>> +#include <linux/module.h>
>>>>> +#include <linux/err.h>
>>>>> +#include <linux/kernel.h>
>>>>> +#include <linux/platform_device.h>
>>>>> +#include <linux/io.h>
>>>>> +#include <linux/thermal.h>
>>>>> +#include <linux/of.h>
>>>>> +
>>>>> +/* From TMON Register Database */
>>>>> +#define TMON_TEMP_VAL_OFFSET            0x0000001c
>>>>> +#define TMON_TEMP_VAL_TEMP_VAL_SHIFT        0
>>>>> +#define TMON_TEMP_VAL_TEMP_VAL_MASK        0x000003ff
>>>>> +
>>>>> +/* Broadcom Thermal Zone Device Structure */
>>>>> +struct bcm_thermal_zone_priv {
>>>>> +    char name[THERMAL_NAME_LENGTH];
>>>>> +    void __iomem *base;
>>>>> +};
>>>>> +
>>>>> +/* Temperature conversion function for TMON block */
>>>>> +static long raw_to_mcelsius(u32 raw)
>>>>> +{
>>>>> +    /*
>>>>> +     * According to Broadcom internal Analog Module Specification
>>>>> +     * the formula for converting TMON block output to temperature in
>>>>> +     * degree Celsius is:
>>>>> +     *    T = 428 - (0.561 * raw)
>>>>> +     * Note: the valid operating range for the TMON block is -40C to
>>>>> 125C
>>>>> +     */
>>>>> +    return 428000 - (561 * (long)raw);
>>>>> +}
>>>>> +
>>>>> +/* Get temperature callback function for thermal zone */
>>>>> +static int bcm_get_temp(struct thermal_zone_device *thermal,
>>>>> +            unsigned long *temp)
>>>>> +{
>>>>> +    u32 raw;
>>>>> +    long mcelsius;
>>>>> +    struct bcm_thermal_zone_priv *priv = thermal->devdata;
>>>>> +
>>>>> +    if (!priv) {
>>>>> +        pr_err("%s: thermal zone number %d devdata not
>>>>> initialized.\n",
>>>>> +            __func__, thermal->id);
>>>>> +        return -EINVAL;
>>>>> +    }
>>>>> +
>>>>> +    raw = (readl(priv->base + TMON_TEMP_VAL_OFFSET)
>>>>> +        & TMON_TEMP_VAL_TEMP_VAL_MASK) >>
>>>>> TMON_TEMP_VAL_TEMP_VAL_SHIFT;
>>>>> +
>>>>> +    pr_debug("%s: thermal zone number %d raw temp 0x%x\n", __func__,
>>>>> +        thermal->id, raw);
>>>>> +
>>>>> +    mcelsius = raw_to_mcelsius(raw);
>>>>> +
>>>>> +    /*
>>>>> +     * Since 'mcelsius' might be negative, we need to limit it to
>>>>> smallest
>>>>> +     * unsigned value before returning it to thermal framework.
>>>>> +     */
>>>>> +    if (mcelsius < 0)
>>>>> +        *temp = 0;
>>>>> +    else
>>>>> +        *temp = mcelsius;
>>>>> +
>>>>> +    pr_debug("%s: thermal zone number %d final temp %d\n", __func__,
>>>>> +        thermal->id, (int) *temp);
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +/* Operation callback functions for thermal zone */
>>>>> +static struct thermal_zone_device_ops bcm_dev_ops = {
>>>>> +    .get_temp = bcm_get_temp,
>>>>> +};
>>>>> +
>>>>> +static const struct of_device_id bcm_tmu_match_table[] = {
>>>>> +    { .compatible = "brcm,kona-thermal" },
>>>>> +    {},
>>>>> +};
>>>>> +MODULE_DEVICE_TABLE(of, bcm_tmu_match_table);
>>>>> +
>>>>> +static int bcm_tmu_probe(struct platform_device *pdev)
>>>>> +{
>>>>> +    struct thermal_zone_device *thermal = NULL;
>>>>> +    struct bcm_thermal_zone_priv *priv;
>>>>> +    struct resource *res;
>>>>> +    const char *str;
>>>>> +
>>>>> +    priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>>>>> +    if (!priv) {
>>>>> +        dev_err(&pdev->dev, "Failed to malloc priv.\n");
>>>>> +        return -ENOMEM;
>>>>> +    }
>>>>> +
>>>>> +    /* Obtain the tmu name from device tree file */
>>>>> +    if (of_property_read_string(pdev->dev.of_node, "thermal-name",
>>>> Hello Wendy,
>>>>
>>>> I would prefer we wait until the work for thermal data [1] gets
>>>> accepted
>>>> before accepting this driver, specially because you are adding device
>>>> specific DT entry to help in your registration with the thermal
>>>> framework. With the mentioned work you wont need it at all.
>>>>
>>>> All best,
>>>>
>>>> [1] - http://lkml.org/lkml/2013/9/15/122
>>> Hello Eduardo,
>>>
>>> Since your changes are quite extensive, would you recommend me to get
>>> your 16 patches into my local workspace and try to integrate the code
>>> from my patches on the top of your patches at this time?  Or should I
>>> wait until your patches get accepted.
>> Hello again Wendy,
>>
>> The only part I am concerned is the device tree entry you are creating
>> for your device/driver. That could be obsolete in near future with the
>> work I am doing currently.
>>
>> The work is, as you mentioned, quite extensive, but should make things
>> easier for device driver writer. If you want, of course, it would be
>> great if you could rebase your work on top of mine and try it out on
>> your side and let me know the outcome.
>>
>> Comments on the proposed binding and documentation is also welcome. Let
>> me know if there is something that it is not clear.
>>
>>> Thanks,
>>> -Wendy
>>>>> +            &str) == 0) {
>>>>> +        strlcpy(priv->name, str, sizeof(priv->name));
>>>>> +    } else {
>>>>> +        dev_err(&pdev->dev, "Failed to get thermal-name from DT.\n");
>>>>> +        return -EINVAL;
>>>>> +    }
>>>>> +
>>>>> +    res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>> +    priv->base = devm_ioremap_resource(&pdev->dev, res);
>>>>> +    if (IS_ERR(priv->base))
>>>>> +        return PTR_ERR(priv->base);
>>>>> +
>>>>> +    thermal = thermal_zone_device_register(priv->name, 0, 0, priv,
>>>>> +                        &bcm_dev_ops, NULL, 0, 0);
>>>>> +    if (IS_ERR(thermal)) {
>>>>> +        dev_err(&pdev->dev,
>>>>> +            "Failed to register Broadcom thermal zone device.\n");
>>>>> +        return PTR_ERR(thermal);
>>>>> +    }
>>>>> +
>>>>> +    platform_set_drvdata(pdev, thermal);
>>>>> +
>>>>> +    dev_info(&pdev->dev, "Broadcom Thermal Monitor Initialized.\n");
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +static int bcm_tmu_remove(struct platform_device *pdev)
>>>>> +{
>>>>> +    struct thermal_zone_device *broadcom_thermal =
>>>>> +        platform_get_drvdata(pdev);
>>>>> +
>>>>> +    thermal_zone_device_unregister(broadcom_thermal);
>>>>> +
>>>>> +    dev_info(&pdev->dev, "Broadcom Thermal Monitor
>>>>> Uninitialized.\n");
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +static struct platform_driver bcm_tmu_driver = {
>>>>> +    .driver = {
>>>>> +        .name = "bcm-thermal",
>>>>> +        .owner = THIS_MODULE,
>>>>> +        .of_match_table = bcm_tmu_match_table,
>>>>> +    },
>>>>> +    .probe = bcm_tmu_probe,
>>>>> +    .remove = bcm_tmu_remove,
>>>>> +};
>>>>> +
>>>>> +module_platform_driver(bcm_tmu_driver);
>>>>> +
>>>>> +MODULE_DESCRIPTION("Broadcom Thermal Driver");
>>>>> +MODULE_AUTHOR("Broadcom");
>>>>> +MODULE_LICENSE("GPL v2");
>>>>> +MODULE_ALIAS("platform:bcm-thermal");
>>>>>
>>
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


Download attachment "signature.asc" of type "application/pgp-signature" (296 bytes)

Powered by blists - more mailing lists