lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5252DBE5.101@overkiz.com>
Date:	Mon, 07 Oct 2013 18:05:57 +0200
From:	boris brezillon <b.brezillon@...rkiz.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>,
	Grant Likely <grant.likely@...aro.org>,
	Rob Herring <rob.herring@...xeda.com>,
	Rob Landley <rob@...dley.net>,
	Andrew Victor <linux@...im.org.za>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Russell King <linux@....linux.org.uk>,
	Mike Turquette <mturquette@...aro.org>,
	Felipe Balbi <balbi@...com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Ludovic Desroches <ludovic.desroches@...el.com>,
	Josh Wu <josh.wu@...el.com>,
	Richard Genoud <richard.genoud@...il.com>
CC:	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 02/19] ARM: at91: add Kconfig options for common clk
 support

On 07/10/2013 17:12, Nicolas Ferre wrote:
> On 08/08/2013 07:02, Boris BREZILLON :
>> This patch adds the following Kconfig options to prepare the 
>> transition to
>> common clk framework:
>>
>> - AT91_USE_OLD_CLK: this option is selected by every SoC which does not
>>    support new at91 clks based on common clk framework (SoC which 
>> does not
>>    define the clock tree in its device tree).
>>    This options is also selected when the user choose non dt boards 
>> support
>>    (new at91 clks can only be registered from a device tree definition).
>>
>> - COMMON_CLK_AT91: this option cannot be selected directly. Instead 
>> it is
>
> I would have prefered to keep "AT91" as a prefix => "AT91_COMMON_CLK"
> But it is not so important.
>
>>    enabled if these 3 conditions are met:
>>     * at least one of the selected SoCs have a PMC (Power Management
>>       Controller) Unit
>>     * device tree support is enabled
>>     * the old at91 clk implementation is disabled (every selected SoC 
>> define
>>       its clks in its device tree and non dt boards support is disabled)
>>
>> - OLD_CLK_AT91: this option cannot be selected directly. Instead it is
>
> Here also.

I'll change the names of these options.

>
>>    enabled if these 2 conditions are met:
>>     * at least one of the selected SoCs have a PMC (Power Management
>>       Controller) Unit
>>     * at least one of the selected SoCs does not define its clks in its
>>       device tree or non dt-boards support is enabled
>>
>> This patch selects AT91_USE_OLD_CLK in all currently supported SoCs. 
>> These
>> selects will be removed after clk definitions are properly added in each
>> soc's device tree.
>> It also selects AT91_USE_OLD_CLK in all non-dt boards support.
>>
>> AT91_PMC_UNIT references are replaced by OLD_CLK_AT91, because PMC 
>> Unit is
>> enabled for both old and common clk implementations, and old clk
>> implementation should not be compiled if COMMON_CLK is enabled.
>>
>> To avoid future link errors, a new stub is created for 
>> at91_dt_clock_init
>> function if OLD_CLK_AT91 is disabled.
>>
>> A new check is added in dt init functions (setup.c) to prepare for SoCs
>> supporting new clk implementation. These SoCs won't setup the
>> register_clocks callback (clk registration is done using of_clk_init).
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
>> ---
>>   arch/arm/mach-at91/Kconfig        |   21 +++++++++++++++++++++
>>   arch/arm/mach-at91/Kconfig.non_dt |    6 ++++++
>>   arch/arm/mach-at91/Makefile       |    2 +-
>>   arch/arm/mach-at91/generic.h      |    3 ++-
>>   arch/arm/mach-at91/setup.c        |    6 ++++--
>>   5 files changed, 34 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index 699b71e..85b53a4 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -6,10 +6,22 @@ config HAVE_AT91_DBGU0
>>   config HAVE_AT91_DBGU1
>>       bool
>>
>> +config AT91_USE_OLD_CLK
>> +    bool
>> +
>>   config AT91_PMC_UNIT
>>       bool
>>       default !ARCH_AT91X40
>>
>> +config COMMON_CLK_AT91
>> +    bool
>> +    default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
>> +    select COMMON_CLK
>> +
>> +config OLD_CLK_AT91
>> +    bool
>> +    default AT91_PMC_UNIT && AT91_USE_OLD_CLK
>> +
>>   config AT91_SAM9_ALT_RESET
>>       bool
>>       default !ARCH_AT91X40
>> @@ -65,6 +77,7 @@ config SOC_SAMA5D3
>>       select SOC_SAMA5
>>       select HAVE_FB_ATMEL
>>       select HAVE_AT91_DBGU1
>> +    select AT91_USE_OLD_CLK
>>       help
>>         Select this if you are using one of Atmel's SAMA5D3 family SoC.
>>         This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
>> @@ -78,11 +91,13 @@ config SOC_AT91RM9200
>>       select HAVE_AT91_DBGU0
>>       select MULTI_IRQ_HANDLER
>>       select SPARSE_IRQ
>> +    select AT91_USE_OLD_CLK
>>
>>   config SOC_AT91SAM9260
>>       bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
>>       select HAVE_AT91_DBGU0
>>       select SOC_AT91SAM9
>> +    select AT91_USE_OLD_CLK
>>       help
>>         Select this if you are using one of Atmel's AT91SAM9260, 
>> AT91SAM9XE
>>         or AT91SAM9G20 SoC.
>> @@ -92,6 +107,7 @@ config SOC_AT91SAM9261
>>       select HAVE_AT91_DBGU0
>>       select HAVE_FB_ATMEL
>>       select SOC_AT91SAM9
>> +    select AT91_USE_OLD_CLK
>>       help
>>         Select this if you are using one of Atmel's AT91SAM9261 or 
>> AT91SAM9G10 SoC.
>>
>> @@ -100,18 +116,21 @@ config SOC_AT91SAM9263
>>       select HAVE_AT91_DBGU1
>>       select HAVE_FB_ATMEL
>>       select SOC_AT91SAM9
>> +    select AT91_USE_OLD_CLK
>>
>>   config SOC_AT91SAM9RL
>>       bool "AT91SAM9RL"
>>       select HAVE_AT91_DBGU0
>>       select HAVE_FB_ATMEL
>>       select SOC_AT91SAM9
>> +    select AT91_USE_OLD_CLK
>>
>>   config SOC_AT91SAM9G45
>>       bool "AT91SAM9G45 or AT91SAM9M10 families"
>>       select HAVE_AT91_DBGU1
>>       select HAVE_FB_ATMEL
>>       select SOC_AT91SAM9
>> +    select AT91_USE_OLD_CLK
>>       help
>>         Select this if you are using one of Atmel's AT91SAM9G45 
>> family SoC.
>>         This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and 
>> AT91SAM9M11.
>> @@ -121,6 +140,7 @@ config SOC_AT91SAM9X5
>>       select HAVE_AT91_DBGU0
>>       select HAVE_FB_ATMEL
>>       select SOC_AT91SAM9
>> +    select AT91_USE_OLD_CLK
>>       help
>>         Select this if you are using one of Atmel's AT91SAM9x5 family 
>> SoC.
>>         This means that your SAM9 name finishes with a '5' (except if 
>> it is
>> @@ -133,6 +153,7 @@ config SOC_AT91SAM9N12
>>       select HAVE_AT91_DBGU0
>>       select HAVE_FB_ATMEL
>>       select SOC_AT91SAM9
>> +    select AT91_USE_OLD_CLK
>>       help
>>         Select this if you are using Atmel's AT91SAM9N12 SoC.
>>
>> diff --git a/arch/arm/mach-at91/Kconfig.non_dt 
>> b/arch/arm/mach-at91/Kconfig.non_dt
>> index ca900be..b736b57 100644
>> --- a/arch/arm/mach-at91/Kconfig.non_dt
>> +++ b/arch/arm/mach-at91/Kconfig.non_dt
>> @@ -12,26 +12,32 @@ config ARCH_AT91_NONE
>>   config ARCH_AT91RM9200
>>       bool "AT91RM9200"
>>       select SOC_AT91RM9200
>> +    select AT91_USE_OLD_CLK
>>
>>   config ARCH_AT91SAM9260
>>       bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
>>       select SOC_AT91SAM9260
>> +    select AT91_USE_OLD_CLK
>>
>>   config ARCH_AT91SAM9261
>>       bool "AT91SAM9261 or AT91SAM9G10"
>>       select SOC_AT91SAM9261
>> +    select AT91_USE_OLD_CLK
>>
>>   config ARCH_AT91SAM9263
>>       bool "AT91SAM9263"
>>       select SOC_AT91SAM9263
>> +    select AT91_USE_OLD_CLK
>>
>>   config ARCH_AT91SAM9RL
>>       bool "AT91SAM9RL"
>>       select SOC_AT91SAM9RL
>> +    select AT91_USE_OLD_CLK
>>
>>   config ARCH_AT91SAM9G45
>>       bool "AT91SAM9G45"
>>       select SOC_AT91SAM9G45
>> +    select AT91_USE_OLD_CLK
>>
>>   config ARCH_AT91X40
>>       bool "AT91x40"
>> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
>> index 3b0a953..8539411 100644
>> --- a/arch/arm/mach-at91/Makefile
>> +++ b/arch/arm/mach-at91/Makefile
>> @@ -7,7 +7,7 @@ obj-m        :=
>>   obj-n        :=
>>   obj-        :=
>>
>> -obj-$(CONFIG_AT91_PMC_UNIT)    += clock.o
>> +obj-$(CONFIG_OLD_CLK_AT91)    += clock.o
>>   obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
>>   obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
>>   obj-$(CONFIG_AT91_SAM9_TIME)    += at91sam926x_time.o
>> diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
>> index dc6e2f5..375c42e 100644
>> --- a/arch/arm/mach-at91/generic.h
>> +++ b/arch/arm/mach-at91/generic.h
>> @@ -44,11 +44,12 @@ extern void at91sam926x_pit_init(void);
>>   extern void at91x40_timer_init(void);
>>
>>    /* Clocks */
>> -#ifdef CONFIG_AT91_PMC_UNIT
>> +#ifdef CONFIG_OLD_CLK_AT91
>>   extern int __init at91_clock_init(unsigned long main_clock);
>>   extern int __init at91_dt_clock_init(void);
>>   #else
>>   static int inline at91_clock_init(unsigned long main_clock) { 
>> return 0; }
>> +static int inline at91_dt_clock_init(void) { return 0; }
>>   #endif
>>   struct device;
>>
>> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
>> index 41aa68b..06052fc 100644
>> --- a/arch/arm/mach-at91/setup.c
>> +++ b/arch/arm/mach-at91/setup.c
>> @@ -483,7 +483,8 @@ void __init at91rm9200_dt_initialize(void)
>>       at91_dt_clock_init();
>>
>>       /* Register the processor-specific clocks */
>> -    at91_boot_soc.register_clocks();
>> +    if (at91_boot_soc.register_clocks)
>> +        at91_boot_soc.register_clocks();
>>
>>       at91_boot_soc.init();
>>   }
>> @@ -498,7 +499,8 @@ void __init at91_dt_initialize(void)
>>       at91_dt_clock_init();
>>
>>       /* Register the processor-specific clocks */
>> -    at91_boot_soc.register_clocks();
>> +    if (at91_boot_soc.register_clocks)
>> +        at91_boot_soc.register_clocks();
>>
>>       if (at91_boot_soc.init)
>>           at91_boot_soc.init();
>>
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ