| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5254AB6A.1090600@ti.com>
Date: Tue, 8 Oct 2013 21:03:38 -0400
From: Eduardo Valentin <eduardo.valentin@...com>
To: Jacob Pan <jacob.jun.pan@...ux.intel.com>
CC: Zhang Rui <rui.zhang@...el.com>,
Linux PM <linux-pm@...r.kernel.org>,
Eduardo Valentin <eduardo.valentin@...com>,
LKML <linux-kernel@...r.kernel.org>,
Rafael Wysocki <rafael.j.wysocki@...el.com>
Subject: Re: [PATCH] tools/thermal: Introduce tmon, a tool for thermal subsystem
On 08-10-2013 15:03, Jacob Pan wrote:
> Increasingly, Linux is running on thermally constrained devices. The simple
> thermal relationship between processor and fan has become past for modern
> computers.
>
> As hardware vendors cope with the thermal constraints on their products,
> more sensors are added, new cooling capabilities are introduced. The
> complexity of the thermal relationship can grow exponentially among cooling
> devices, zones, sensors, and trip points. They can also change dynamically.
>
> To expose such relationship to the userspace, Linux generic thermal layer
> introduced sysfs entry at /sys/class/thermal with a matrix of symbolic
> links, trip point bindings, and device instances. To traverse such
> matrix by hand is not a trivial task. Testing is also difficult in that
> thermal conditions are often exception cases that hard to reach in
> normal operations.
>
> TMON is conceived as a tool to help visualize, tune, and test the
> complex thermal subsystem.
Jacob,
Very nice initiative. Thanks for providing tools on thermal area. We are
lacking them. I have been using the linaro thermal testing scripts for
smoking testing the systems I am working on. But I have been considering
writing a ncurses based tool for long time. It is good anyway that you
have started and even shared it already.
I gave a very quick shot on my OMAP4460 panda board and tmon is crashing
with segfault:
> TMON v1.0
>
> ┌──────────────────────────────────────────────────────────────────────────────┐
> │Thermal Zones: cpu_therm00 │
> │Trip Points: CP │
> └──────────────────────────────────────────────────────────────────────────────┘
> ┌──────────────────────────────────────────────────────────────────────────────┐
> │ID Cooling Dev Cur Max Thermal Zone Binding │
> │00 thermal-cpuf 0 3 Segmentation fault │
> └─────────────────────────────────────────────────[root@(none) ~]# ────────────┘
> [root@(none) ~]# ./tmontmon ───────────────────────────────────────────────────┐
> │ 10 20 30 40 50 60 │
> │cpu_th 0:[ 0][> │
> └──────────────────────────────────────────────────────────────────────────────┘
>
>
I believe it is while updating the progress bar you've written to
represent temperature on the thermal zone temperature.
I still need to have a proper look on your code though. Looks like you
do not add it to tools/Makefile?
Also, please copy people that get_maintainer.pl -f tools/ outputs:
./scripts/get_maintainer.pl -f tools/
Arnaldo Carvalho de Melo <acme@...hat.com> (commit_signer:724/902=80%)
Namhyung Kim <namhyung@...nel.org> (commit_signer:237/902=26%)
Jiri Olsa <jolsa@...hat.com> (commit_signer:219/902=24%)
David Ahern <dsahern@...il.com> (commit_signer:69/902=8%)
Adrian Hunter <adrian.hunter@...el.com> (commit_signer:59/902=
>
> Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> ---
> tools/thermal/tmon/Makefile | 47 ++++
> tools/thermal/tmon/README | 50 ++++
> tools/thermal/tmon/pid.c | 131 +++++++++
> tools/thermal/tmon/sysfs.c | 585 +++++++++++++++++++++++++++++++++++++++
> tools/thermal/tmon/tmon.8 | 142 ++++++++++
> tools/thermal/tmon/tmon.c | 350 ++++++++++++++++++++++++
> tools/thermal/tmon/tmon.h | 204 ++++++++++++++
> tools/thermal/tmon/tui.c | 631 +++++++++++++++++++++++++++++++++++++++++++
> 8 files changed, 2140 insertions(+)
> create mode 100644 tools/thermal/tmon/Makefile
> create mode 100644 tools/thermal/tmon/README
> create mode 100644 tools/thermal/tmon/pid.c
> create mode 100644 tools/thermal/tmon/sysfs.c
> create mode 100644 tools/thermal/tmon/tmon.8
> create mode 100644 tools/thermal/tmon/tmon.c
> create mode 100644 tools/thermal/tmon/tmon.h
> create mode 100644 tools/thermal/tmon/tui.c
>
> diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile
> new file mode 100644
> index 0000000..c17131b
> --- /dev/null
> +++ b/tools/thermal/tmon/Makefile
> @@ -0,0 +1,47 @@
> +VERSION = 1.0
> +
> +BINDIR=usr/bin
> +WARNFLAGS=-Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int
> +CFLAGS= -O1 ${WARNFLAGS} -fstack-protector
> +CC=gcc
> +
> +CFLAGS+=-D VERSION=\"$(VERSION)\"
> +LDFLAGS+=
> +TARGET=tmon
> +
> +INSTALL_PROGRAM=install -m 755 -p
> +DEL_FILE=rm -f
> +
> +INSTALL_CONFIGFILE=install -m 644 -p
> +CONFIG_FILE=
> +CONFIG_PATH=
> +
> +
> +OBJS = tmon.o tui.o sysfs.o pid.o
> +OBJS +=
> +
> +tmon: $(OBJS) Makefile tmon.h
> + $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lncursesw -lm -lpanel -lpthread
> +
> +valgrind: tmon
> + sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET) 1> /dev/null
> +
> +install:
> + - mkdir -p $(INSTALL_ROOT)/$(BINDIR)
> + - $(INSTALL_PROGRAM) "$(TARGET)" "$(INSTALL_ROOT)/$(BINDIR)/$(TARGET)"
> + - mkdir -p $(INSTALL_ROOT)/$(CONFIG_PATH)
> + - $(INSTALL_CONFIGFILE) "$(CONFIG_FILE)" "$(INSTALL_ROOT)/$(CONFIG_PATH)"
> +
> +uninstall:
> + $(DEL_FILE) "$(INSTALL_ROOT)/$(BINDIR)/$(TARGET)"
> + $(CONFIG_FILE) "$(CONFIG_PATH)"
> +
> +
> +clean:
> + find . -name "*.o" | xargs $(DEL_FILE)
> + rm -f $(TARGET)
> +
> +dist:
> + git tag v$(VERSION)
> + git archive --format=tar --prefix="$(TARGET)-$(VERSION)/" v$(VERSION) | \
> + gzip > $(TARGET)-$(VERSION).tar.gz
> diff --git a/tools/thermal/tmon/README b/tools/thermal/tmon/README
> new file mode 100644
> index 0000000..4579498
> --- /dev/null
> +++ b/tools/thermal/tmon/README
> @@ -0,0 +1,50 @@
> +TMON - A Monitoring and Testing Tool for Linux kernel thermal subsystem
> +
> +Why TMON?
> +==========
> +Increasingly, Linux is running on thermally constrained devices. The simple
> +thermal relationship between processor and fan has become past for modern
> +computers.
> +
> +As hardware vendors cope with the thermal constraints on their products, more
> +and more sensors are added, new cooling capabilities are introduced. The
> +complexity of the thermal relationship can grow exponentially among cooling
> +devices, zones, sensors, and trip points. They can also change dynamically.
> +
> +To expose such relationship to the userspace, Linux generic thermal layer
> +introduced sysfs entry at /sys/class/thermal with a matrix of symbolic
> +links, trip point bindings, and device instances. To traverse such
> +matrix by hand is not a trivial task. Testing is also difficult in that
> +thermal conditions are often exception cases that hard to reach in
> +normal operations.
> +
> +TMON is conceived as a tool to help visualize, tune, and test the
> +complex thermal subsystem.
> +
> +Files
> +=====
> + tmon.c : main function for set up and configurations.
> + tui.c : handles ncurses based user interface
> + sysfs.c : access to the generic thermal sysfs
> + pid.c : a proportional-integral-derivative (PID) controller
> + that can be used for thermal relationship training.
> +
> +Requirements
> +============
> +Depends on ncurses
> +
> +Build
> +=========
> +$ make
> +$ sudo ./tmon -h
> +Usage: tmon [OPTION...]
> + -c, --control cooling device in control
> + -d, --daemon run as daemon, no TUI
> + -l, --log log data to /var/tmp/tmon.log
> + -h, --help show this help message
> + -t, --time-interval set time interval for sampling
> + -v, --version show version
> + -g, --debug debug message in syslog
> +
> +1. For monitoring only:
> +$ sudo ./tmon
> diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c
> new file mode 100644
> index 0000000..fd7e9e9
> --- /dev/null
> +++ b/tools/thermal/tmon/pid.c
> @@ -0,0 +1,131 @@
> +/*
> + * pid.c PID controller for testing cooling devices
> + *
> + *
> + *
> + * Copyright (C) 2012 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 or later as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Author Name Jacob Pan <jacob.jun.pan@...ux.intel.com>
> + *
> + */
> +
> +#include <unistd.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <stdint.h>
> +#include <sys/types.h>
> +#include <dirent.h>
> +#include <libintl.h>
> +#include <ctype.h>
> +#include <assert.h>
> +#include <time.h>
> +#include <limits.h>
> +#include <math.h>
> +#include <sys/stat.h>
> +#include <syslog.h>
> +
> +#include "tmon.h"
> +
> +/**************************************************************************
> + * PID (Proportional-Integral-Derivative) controller is commonly used in
> + * linear control system, consider the the process.
> + * G(s) = U(s)/E(s)
> + * kp = proportional gain
> + * ki = integral gain
> + * kd = derivative gain
> + * Ts
> + * We use type C Alan Bradley equation which takes set point off the
> + * output dependency in P and D term.
> + *
> + * y[k] = y[k-1] - kp*(x[k] - x[k-1]) + Ki*Ts*e[k] - Kd*(x[k]
> + * - 2*x[k-1]+x[k-2])/Ts
> + *
> + *
> + ***********************************************************************/
> +struct pid_params p_param;
> +/* cached data from previous loop */
> +static double xk_1, xk_2; /* input temperature x[k-#] */
> +
> +/*
> + * TODO: make PID parameters tuned automatically,
> + * 1. use CPU burn to produce open loop unit step response
> + * 2. calculate PID based on Ziegler-Nichols rule
> + *
> + * add a flag for tuning PID
> + */
> +int init_thermal_controller(void)
> +{
> + int ret = 0;
> +
> + /* init pid params */
> + p_param.ts = ticktime;
> + /* TODO: get it from TUI tuning tab */
> + p_param.kp = .36;
> + p_param.ki = 5.0;
> + p_param.kd = 0.19;
> +
> + p_param.t_target = target_temp_user;
> +
> + return ret;
> +}
> +
> +void controller_reset(void)
> +{
> + /* TODO: relax control data when not over thermal limit */
> + syslog(LOG_DEBUG, "TC inactive, relax p-state\n");
> + p_param.y_k = 0.0;
> + xk_1 = 0.0;
> + xk_2 = 0.0;
> + set_ctrl_state(0);
> +}
> +
> +/* To be called at time interval Ts. Type C PID controller.
> + * y[k] = y[k-1] - kp*(x[k] - x[k-1]) + Ki*Ts*e[k] - Kd*(x[k]
> + * - 2*x[k-1]+x[k-2])/Ts
> + * TODO: add low pass filter for D term
> + */
> +#define GUARD_BAND (2)
> +void controller_handler(const double xk, double *yk)
> +{
> + double ek;
> + double p_term, i_term, d_term;
> +
> + ek = p_param.t_target - xk; /* error */
> + if (ek >= 3.0) {
> + syslog(LOG_DEBUG, "PID: %3.1f Below set point %3.1f, stop\n",
> + xk, p_param.t_target);
> + controller_reset();
> + *yk = 0.0;
> + return;
> + }
> + /* compute intermediate PID terms */
> + p_term = -p_param.kp * (xk - xk_1);
> + i_term = p_param.kp * p_param.ki * p_param.ts * ek;
> + d_term = -p_param.kp * p_param.kd * (xk - 2 * xk_1 + xk_2) / p_param.ts;
> + /* compute output */
> + *yk += p_term + i_term + d_term;
> + /* update sample data */
> + xk_1 = xk;
> + xk_2 = xk_1;
> +
> + /* clamp output adjustment range */
> + if (*yk < -LIMIT_HIGH)
> + *yk = -LIMIT_HIGH;
> + else if (*yk > -LIMIT_LOW)
> + *yk = -LIMIT_LOW;
> +
> + p_param.y_k = *yk;
> +
> + set_ctrl_state(lround(fabs(p_param.y_k)));
> +
> +}
> diff --git a/tools/thermal/tmon/sysfs.c b/tools/thermal/tmon/sysfs.c
> new file mode 100644
> index 0000000..54e24b3
> --- /dev/null
> +++ b/tools/thermal/tmon/sysfs.c
> @@ -0,0 +1,585 @@
> +/*
> + * sysfs.c sysfs ABI access functions for TMON program
> + *
> + * Copyright (C) 2013 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 or later as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Author: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> + *
> + */
> +#include <unistd.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <stdint.h>
> +#include <dirent.h>
> +#include <libintl.h>
> +#include <ctype.h>
> +#include <time.h>
> +#include <syslog.h>
> +#include <sys/time.h>
> +#include <errno.h>
> +
> +#include "tmon.h"
> +
> +struct tmon_platform_data ptdata;
> +const char *trip_type_name[] = {
> + "critical",
> + "hot",
> + "passive",
> + "active",
> +};
> +
> +int sysfs_set_ulong(char *path, char *filename, unsigned long val)
> +{
> + FILE *fd;
> + int ret = -1;
> + char filepath[256];
> +
> + snprintf(filepath, 256, "%s/%s", path, filename);
> +
> + fd = fopen(filepath, "w");
> + if (!fd) {
> + syslog(LOG_ERR, "Err: open %s: %s\n", __func__, filepath);
> + return ret;
> + }
> + ret = fprintf(fd, "%lu", val);
> + fclose(fd);
> +
> + return 0;
> +}
> +
> +/* history of thermal data, used for control algo */
> +#define NR_THERMAL_RECORDS 3
> +struct thermal_data_record trec[NR_THERMAL_RECORDS];
> +int cur_thermal_record; /* index to the trec array */
> +
> +static int sysfs_get_ulong(char *path, char *filename, unsigned long *p_ulong)
> +{
> + FILE *fd;
> + int ret = -1;
> + char filepath[256];
> +
> + snprintf(filepath, 256, "%s/%s", path, filename);
> +
> + fd = fopen(filepath, "r");
> + if (!fd) {
> + syslog(LOG_ERR, "Err: open %s: %s\n", __func__, filepath);
> + return ret;
> + }
> + ret = fscanf(fd, "%lu", p_ulong);
> + fclose(fd);
> +
> + return 0;
> +}
> +
> +static int sysfs_get_string(char *path, char *filename, char *str)
> +{
> + FILE *fd;
> + int ret = -1;
> + char filepath[256];
> +
> + snprintf(filepath, 256, "%s/%s", path, filename);
> +
> + fd = fopen(filepath, "r");
> + if (!fd) {
> + syslog(LOG_ERR, "Err: open %s: %s\n", __func__, filepath);
> + return ret;
> + }
> + ret = fscanf(fd, "%256s", str);
> + fclose(fd);
> +
> + return ret;
> +}
> +
> +/* get states of the cooling device instance */
> +static int probe_cdev(struct cdev_info *cdi, char *path)
> +{
> + sysfs_get_string(path, "type", cdi->type);
> + sysfs_get_ulong(path, "max_state", &cdi->max_state);
> + sysfs_get_ulong(path, "cur_state", &cdi->cur_state);
> +
> + syslog(LOG_INFO, "%s: %s: type %s, max %lu, curr %lu inst %d\n",
> + __func__, path,
> + cdi->type, cdi->max_state, cdi->cur_state, cdi->instance);
> +
> + return 0;
> +}
> +
> +static int str_to_trip_type(char *name)
> +{
> + int i;
> +
> + for (i = 0; i < NR_THERMAL_TRIP_TYPE; i++) {
> + if (!strcmp(name, trip_type_name[i]))
> + return i;
> + }
> +
> + return -ENOENT;
> +}
> +
> +/* scan and fill in trip point info for a thermal zone and trip point id */
> +static int get_trip_point_data(char *tz_path, int tzid, int tpid)
> +{
> + char filename[256];
> + char temp_str[256];
> + int trip_type;
> +
> + if (tpid >= MAX_NR_TRIP)
> + return -EINVAL;
> + /* check trip point type */
> + snprintf(filename, sizeof(filename), "trip_point_%d_type", tpid);
> + sysfs_get_string(tz_path, filename, temp_str);
> + trip_type = str_to_trip_type(temp_str);
> + if (trip_type < 0) {
> + syslog(LOG_ERR, "%s:%s no matching type\n", __func__, temp_str);
> + return -ENOENT;
> + }
> + ptdata.tzi[tzid].tp[tpid].type = trip_type;
> + syslog(LOG_INFO, "%s:tz:%d tp:%d:type:%s type id %d\n", __func__, tzid,
> + tpid, temp_str, trip_type);
> +
> + /* TODO: check attribute */
> +
> + return 0;
> +}
> +
> +/* return instance id for file format such as trip_point_4_temp */
> +static int get_instance_id(char *name, int pos, int skip)
> +{
> + char *ch;
> + int i = 0;
> +
> + ch = strtok(name, "_");
> + while (ch != NULL) {
> + ++i;
> + syslog(LOG_INFO, "%s:%s:%s:%d", __func__, name, ch, i);
> + ch = strtok(NULL, "_");
> + if (pos == i)
> + return atol(ch + skip);
> + }
> +
> + return -1;
> +}
> +
> +/* Find trip point info of a thermal zone */
> +static int find_tzone_tp(char *tz_name, char *d_name, struct tz_info *tzi,
> + int tz_id)
> +{
> + int tp_id;
> + unsigned long temp_ulong;
> +
> + if (strstr(d_name, "trip_point") &&
> + strstr(d_name, "temp")) {
> + /* check if trip point temp is non-zero
> + * ignore 0/invalid trip points
> + */
> + sysfs_get_ulong(tz_name, d_name, &temp_ulong);
> + if (temp_ulong < MAX_TEMP_KC) {
> + tzi->nr_trip_pts++;
> + /* found a valid trip point */
> + tp_id = get_instance_id(d_name, 2, 0);
> + syslog(LOG_DEBUG, "tzone %s trip %d temp %lu tpnode %s",
> + tz_name, tp_id, temp_ulong, d_name);
> + if (tp_id < 0 || tp_id >= MAX_NR_TRIP) {
> + syslog(LOG_ERR, "Failed to find TP inst %s\n",
> + d_name);
> + return -1;
> + }
> + get_trip_point_data(tz_name, tz_id, tp_id);
> + tzi->tp[tp_id].temp = temp_ulong;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/* check cooling devices for binding info. */
> +static int find_tzone_cdev(struct dirent *nl, char *tz_name,
> + struct tz_info *tzi, int tz_id, int cid)
> +{
> + unsigned long trip_instance = 0;
> + char cdev_name_linked[256];
> + char cdev_name[256];
> + char cdev_trip_name[256];
> + int cdev_id;
> +
> + if (nl->d_type == DT_LNK) {
> + syslog(LOG_DEBUG, "TZ%d: cdev: %s cid %d\n", tz_id, nl->d_name,
> + cid);
> + tzi->nr_cdev++;
> + if (tzi->nr_cdev > ptdata.nr_cooling_dev) {
> + syslog(LOG_ERR, "Err: Too many cdev? %d\n",
> + tzi->nr_cdev);
> + return -EINVAL;
> + }
> + /* find the link to real cooling device record binding */
> + snprintf(cdev_name, 256, "%s/%s", tz_name, nl->d_name);
> + memset(cdev_name_linked, 0, sizeof(cdev_name_linked));
> + if (readlink(cdev_name, cdev_name_linked,
> + sizeof(cdev_name_linked) - 1) != -1) {
> + cdev_id = get_instance_id(cdev_name_linked, 1,
> + sizeof("device") - 1);
> + syslog(LOG_DEBUG, "cdev %s linked to %s : %d\n",
> + cdev_name, cdev_name_linked, cdev_id);
> + tzi->cdev_binding |= (1 << cdev_id);
> +
> + /* find the trip point in which the cdev is binded to
> + * in this tzone
> + */
> + snprintf(cdev_trip_name, 256, "%s%s", nl->d_name,
> + "_trip_point");
> + sysfs_get_ulong(tz_name, cdev_trip_name,
> + &trip_instance);
> + /* validate trip point range, e.g. trip could return -1
> + * when passive is enabled
> + */
> + if (trip_instance > MAX_NR_TRIP)
> + trip_instance = 0;
> + tzi->trip_binding[cdev_id] |= 1 << trip_instance;
> + syslog(LOG_DEBUG, "cdev %s -> trip:%lu: 0x%lx %d\n",
> + cdev_name, trip_instance,
> + tzi->trip_binding[cdev_id],
> + cdev_id);
> +
> +
> + }
> + return 0;
> + }
> +
> + return -ENODEV;
> +}
> +
> +
> +
> +/*****************************************************************************
> + * Before calling scan_tzones, thermal sysfs must be probed to determine
> + * the number of thermal zones and cooling devices.
> + * We loop through each thermal zone and fill in tz_info struct, i.e.
> + * ptdata.tzi[]
> +root@...ob-chiefriver:~# tree -d /sys/class/thermal/thermal_zone0
> +/sys/class/thermal/thermal_zone0
> +|-- cdev0 -> ../cooling_device4
> +|-- cdev1 -> ../cooling_device3
> +|-- cdev10 -> ../cooling_device7
> +|-- cdev11 -> ../cooling_device6
> +|-- cdev12 -> ../cooling_device5
> +|-- cdev2 -> ../cooling_device2
> +|-- cdev3 -> ../cooling_device1
> +|-- cdev4 -> ../cooling_device0
> +|-- cdev5 -> ../cooling_device12
> +|-- cdev6 -> ../cooling_device11
> +|-- cdev7 -> ../cooling_device10
> +|-- cdev8 -> ../cooling_device9
> +|-- cdev9 -> ../cooling_device8
> +|-- device -> ../../../LNXSYSTM:00/device:62/LNXTHERM:00
> +|-- power
> +`-- subsystem -> ../../../../class/thermal
> +*****************************************************************************/
> +static int scan_tzones(void)
> +{
> + DIR *dir;
> + struct dirent **namelist;
> + char tz_name[256];
> + int i, j, n, k = 0;
> +
> + if (!ptdata.nr_tz_sensor) {
> + syslog(LOG_ERR, "No thermal zones found!\n");
> + return -1;
> + }
> +
> + for (i = 0; i <= ptdata.max_tz_instance; i++) {
> + memset(tz_name, 0, sizeof(tz_name));
> + snprintf(tz_name, 256, "%s/%s%d", THERMAL_SYSFS, TZONE, i);
> +
> + dir = opendir(tz_name);
> + if (!dir) {
> + syslog(LOG_INFO, "Thermal zone %s skipped\n", tz_name);
> + continue;
> + }
> + /* keep track of valid tzones */
> + n = scandir(tz_name, &namelist, 0, alphasort);
> + if (n < 0)
> + syslog(LOG_ERR, "scandir failed in %s", tz_name);
> + else {
> + sysfs_get_string(tz_name, "type", ptdata.tzi[k].type);
> + ptdata.tzi[k].instance = i;
> + /* detect trip points and cdev attached to this tzone */
> + j = 0; /* index for cdev */
> + ptdata.tzi[k].nr_cdev = 0;
> + ptdata.tzi[k].nr_trip_pts = 0;
> + while (n--) {
> + char *temp_str;
> +
> + if (find_tzone_tp(tz_name, namelist[n]->d_name,
> + &ptdata.tzi[k], k))
> + break;
> + temp_str = strstr(namelist[n]->d_name, "cdev");
> + if (!temp_str) {
> + free(namelist[n]);
> + continue;
> + }
> + if (!find_tzone_cdev(namelist[n], tz_name,
> + &ptdata.tzi[k], i, j))
> + j++; /* increment cdev index */
> + free(namelist[n]);
> + }
> + free(namelist);
> + }
> + /*TODO: reverse trip points */
> + closedir(dir);
> + syslog(LOG_INFO, "TZ %d has %d cdev\n", i,
> + ptdata.tzi[k].nr_cdev);
> + k++;
> + }
> +
> + return 0;
> +}
> +
> +static int scan_cdevs(void)
> +{
> + DIR *dir;
> + struct dirent **namelist;
> + char cdev_name[256];
> + int i, n, k = 0;
> +
> + for (i = 0; i <= ptdata.max_cdev_instance; i++) {
> + memset(cdev_name, 0, sizeof(cdev_name));
> + snprintf(cdev_name, 256, "%s/%s%d", THERMAL_SYSFS, CDEV, i);
> +
> + dir = opendir(cdev_name);
> + if (!dir) {
> + syslog(LOG_INFO, "Cooling dev %s skipped\n", cdev_name);
> + /* there is a gap in cooling device id, check again
> + * for the same index.
> + */
> + continue;
> + }
> +
> + n = scandir(cdev_name, &namelist, 0, alphasort);
> + if (n < 0)
> + syslog(LOG_ERR, "scandir failed in %s", cdev_name);
> + else {
> + sysfs_get_string(cdev_name, "type", ptdata.cdi[k].type);
> + ptdata.cdi[k].instance = i;
> + if (strstr(ptdata.cdi[k].type, ctrl_cdev)) {
> + ptdata.cdi[k].flag |= CDEV_FLAG_IN_CONTROL;
> + syslog(LOG_DEBUG, "control cdev id %d\n", i);
> + }
> + while (n--)
> + free(namelist[n]);
> + free(namelist);
> + }
> + closedir(dir);
> + k++;
> + }
> + return 0;
> +}
> +
> +
> +int probe_thermal_sysfs(void)
> +{
> + DIR *dir;
> + struct dirent **namelist;
> + int n;
> +
> + dir = opendir(THERMAL_SYSFS);
> + if (!dir) {
> + syslog(LOG_ERR, "No thermal sysfs\n");
> + return -1;
> + }
> + n = scandir(THERMAL_SYSFS, &namelist, 0, alphasort);
> + if (n < 0)
> + syslog(LOG_ERR, "scandir failed in thermal sysfs");
> + else {
> + /* detect number of thermal zones and cooling devices */
> + while (n--) {
> + int inst;
> +
> + if (strstr(namelist[n]->d_name, CDEV)) {
> + inst = get_instance_id(namelist[n]->d_name, 1,
> + sizeof("device") - 1);
> + /* keep track of the max cooling device since
> + * there may be gaps.
> + */
> + if (inst > ptdata.max_cdev_instance)
> + ptdata.max_cdev_instance = inst;
> +
> + syslog(LOG_DEBUG, "found cdev: %s %d %d\n",
> + namelist[n]->d_name,
> + ptdata.nr_cooling_dev,
> + ptdata.max_cdev_instance);
> + ptdata.nr_cooling_dev++;
> + } else if (strstr(namelist[n]->d_name, TZONE)) {
> + inst = get_instance_id(namelist[n]->d_name, 1,
> + sizeof("zone") - 1);
> + if (inst > ptdata.max_tz_instance)
> + ptdata.max_tz_instance = inst;
> +
> + syslog(LOG_DEBUG, "found tzone: %s %d %d\n",
> + namelist[n]->d_name,
> + ptdata.nr_tz_sensor,
> + ptdata.max_tz_instance);
> + ptdata.nr_tz_sensor++;
> + }
> + free(namelist[n]);
> + }
> + free(namelist);
> + }
> + syslog(LOG_INFO, "found %d tzone(s), %d cdev(s), target zone %d\n",
> + ptdata.nr_tz_sensor, ptdata.nr_cooling_dev,
> + target_thermal_zone);
> + closedir(dir);
> +
> + ptdata.tzi = calloc(sizeof(struct tz_info), ptdata.nr_tz_sensor+1);
> + if (!ptdata.tzi) {
> + syslog(LOG_ERR, "Err: allocate tz_info\n");
> + return -1;
> + }
> +
> + ptdata.cdi = calloc(sizeof(struct cdev_info), ptdata.nr_cooling_dev+1);
> + if (!ptdata.cdi) {
> + syslog(LOG_ERR, "Err: allocate cdev_info\n");
> + return -1;
> + }
> +
> + /* now probe tzones */
> + if (scan_tzones())
> + return -1;
> + if (scan_cdevs())
> + return -1;
> + return 0;
> +}
> +
> +/* convert sysfs zone instance to zone array index */
> +int zone_instance_to_index(int zone_inst)
> +{
> + int i;
> +
> + for (i = 0; i < ptdata.nr_tz_sensor; i++)
> + if (ptdata.tzi[i].instance == zone_inst)
> + return i;
> + return -ENOENT;
> +}
> +
> +/* read temperature of all thermal zones */
> +int update_thermal_data()
> +{
> + int i;
> + char tz_name[256];
> + static unsigned long samples;
> +
> + if (!ptdata.nr_tz_sensor) {
> + syslog(LOG_ERR, "No thermal zones found!\n");
> + return -1;
> + }
> +
> + /* circular buffer for keeping historic data */
> + if (cur_thermal_record >= NR_THERMAL_RECORDS)
> + cur_thermal_record = 0;
> + gettimeofday(&trec[cur_thermal_record].tv, NULL);
> + if (tmon_log) {
> + fprintf(tmon_log, "%lu ", ++samples);
> + fprintf(tmon_log, "%3.1f ", p_param.t_target);
> + }
> + for (i = 0; i < ptdata.nr_tz_sensor; i++) {
> + memset(tz_name, 0, sizeof(tz_name));
> + snprintf(tz_name, 256, "%s/%s%d", THERMAL_SYSFS, TZONE,
> + ptdata.tzi[i].instance);
> + sysfs_get_ulong(tz_name, "temp",
> + &trec[cur_thermal_record].temp[i]);
> + if (tmon_log)
> + fprintf(tmon_log, "%lu ",
> + trec[cur_thermal_record].temp[i]/1000);
> + }
> + for (i = 0; i < ptdata.nr_cooling_dev; i++) {
> + char cdev_name[256];
> + unsigned long val;
> +
> + snprintf(cdev_name, 256, "%s/%s%d", THERMAL_SYSFS, CDEV,
> + ptdata.cdi[i].instance);
> + probe_cdev(&ptdata.cdi[i], cdev_name);
> + val = ptdata.cdi[i].cur_state;
> + if (val > 1000000)
> + val = 0;
> + if (tmon_log)
> + fprintf(tmon_log, "%lu ", val);
> + }
> +
> + if (tmon_log) {
> + fprintf(tmon_log, "\n");
> + fflush(tmon_log);
> + }
> +
> + return 0;
> +}
> +
> +void set_ctrl_state(unsigned long state)
> +{
> + char ctrl_cdev_path[256];
> + int i;
> + unsigned long cdev_state;
> +
> + if (no_control)
> + return;
> + /* set all ctrl cdev to the same state */
> + for (i = 0; i < ptdata.nr_cooling_dev; i++) {
> + if (ptdata.cdi[i].flag & CDEV_FLAG_IN_CONTROL) {
> + if (ptdata.cdi[i].max_state < 10) {
> + syslog(LOG_WARNING,
> + "not enough states in control cdev\n");
> + return;
> + }
> + /* scale to percentage of max_state */
> + cdev_state = state * ptdata.cdi[i].max_state/100;
> + syslog(LOG_DEBUG,
> + "ctrl cdev %d set state %lu scaled to %lu\n",
> + ptdata.cdi[i].instance, state, cdev_state);
> + snprintf(ctrl_cdev_path, 256, "%s/%s%d", THERMAL_SYSFS,
> + CDEV, ptdata.cdi[i].instance);
> + syslog(LOG_DEBUG, "ctrl cdev path %s", ctrl_cdev_path);
> + sysfs_set_ulong(ctrl_cdev_path, "cur_state",
> + cdev_state);
> + }
> + }
> +}
> +
> +void get_ctrl_state(unsigned long *state)
> +{
> + char ctrl_cdev_path[256];
> + int ctrl_cdev_id = -1;
> + int i;
> +
> + /* TODO: take average of all ctrl types. also consider change based on
> + * uevent. Take the first reading for now.
> + */
> + for (i = 0; i < ptdata.nr_cooling_dev; i++) {
> + if (ptdata.cdi[i].flag & CDEV_FLAG_IN_CONTROL) {
> + ctrl_cdev_id = ptdata.cdi[i].instance;
> + syslog(LOG_INFO, "ctrl cdev %d get state\n",
> + ptdata.cdi[i].instance);
> + break;
> + }
> + }
> + if (ctrl_cdev_id == -1) {
> + *state = 0;
> + return;
> + }
> + snprintf(ctrl_cdev_path, 256, "%s/%s%d", THERMAL_SYSFS,
> + CDEV, ctrl_cdev_id);
> + sysfs_get_ulong(ctrl_cdev_path, "cur_state", state);
> +}
> +
> +void free_thermal_data(void)
> +{
> + free(ptdata.tzi);
> + free(ptdata.cdi);
> +}
> diff --git a/tools/thermal/tmon/tmon.8 b/tools/thermal/tmon/tmon.8
> new file mode 100644
> index 0000000..0be727c
> --- /dev/null
> +++ b/tools/thermal/tmon/tmon.8
> @@ -0,0 +1,142 @@
> +.TH TMON 8
> +.SH NAME
> +\fBtmon\fP - A monitoring and testing tool for Linux kernel thermal subsystem
> +
> +.SH SYNOPSIS
> +.ft B
> +.B tmon
> +.RB [ Options ]
> +.br
> +.SH DESCRIPTION
> +\fBtmon \fP can be used to visualize thermal relationship and
> +real-time thermal data; tune
> +and test cooling devices and sensors; collect thermal data for offline
> +analysis and plot. \fBtmon\fP must be run as root in order to control device
> +states via sysfs.
> +.PP
> +\fBFunctions\fP
> +.PP
> +.nf
> +1. Thermal relationships:
> +- show thermal zone information
> +- show cooling device information
> +- show trip point binding within each thermal zone
> +- show trip point and cooling device instance bindings
> +.PP
> +2. Real time data display
> +- show temperature of all thermal zones w.r.t. its trip points and types
> +- show states of all cooling devices
> +.PP
> +3. Thermal relationship learning and device tuning
> +- with a built-in Proportional Integral Derivative (\fBPID\fP)
> +controller, user can pair a cooling device to a thermal sensor for
> +testing the effectiveness and learn about the thermal distance between the two
> +- allow manual control of cooling device states and target temperature
> +.PP
> +4. Data logging in /var/tmp/tmon.log
> +- contains thermal configuration data, i.e. cooling device, thermal
> + zones, and trip points. Can be used for data collection in remote
> + debugging.
> +- log real-time thermal data into space separated format that can be
> + directly consumed by plotting tools such as Rscript.
> +
> +.SS Options
> +.PP
> +The \fB-c --control\fP option sets a cooling device type to control temperature
> +of a thermal zone
> +.PP
> +The \fB-d --daemon\fP option runs \fBtmon \fP as daemon without user interface
> +.PP
> +The \fB-g --debug\fP option allow debug messages to be stored in syslog
> +.PP
> +The \fB-h --help\fP option shows help message
> +.PP
> +The \fB-l --log\fP option write data to /var/tmp/tmon.log
> +.PP
> +The \fB-t --time-interval\fP option sets the polling interval in seconds
> +.PP
> +The \fB-v --version\fP option shows the version of \fBtmon \fP
> +.PP
> +The \fB-z --zone\fP option sets the target therma zone instance to be controlled
> +.PP
> +
> +.SH FIELD DESCRIPTIONS
> +.nf
> +.PP
> +\fBP \fP passive cooling trip point type
> +\fBA \fP active cooling trip point type (fan)
> +\fBC \fP critical trip point type
> +\fBA \fP hot trip point type
> +\fBkp \fP proportional gain of \fBPID\fP controller
> +\fBki \fP integral gain of \fBPID\fP controller
> +\fBkd \fP derivative gain of \fBPID\fP controller
> +
> +.SH REQUIREMENT
> +Build depends on ncurses
> +.PP
> +Runtime depends on window size large enough to show the number of
> +devices found on the system.
> +
> +.PP
> +
> +.SH INTERACTIVE COMMANDS
> +.pp
> +.nf
> +\fBCtrl-C, q/Q\fP stops \fBtmon\fP
> +\fBTAB\fP shows tuning pop up panel, choose a letter to modify
> +
> +.SH EXAMPLES
> +Without any parameters, tmon is in monitoring only mode and refresh
> +screen every 1 second.
> +.PP
> +1. For monitoring only:
> +.nf
> +$ sudo ./tmon
> +
> +2. Use Processor cooling device to control thermal zone 0 at default 65C.
> +$ sudo ./tmon -c Processor -z 0
> +
> +3. Use intel_powerclamp(idle injection) cooling device to control thermal zone 1
> +$ sudo ./tmon -c intel_powerclamp -z 1
> +
> +4. Turn on debug and collect data log at /var/tmp/tmon.log
> +$ sudo ./tmon -g -l
> +
> +For example, the log below shows PID controller was adjusting current states
> +for all cooling devices with "Processor" type such that thermal zone 0
> +can stay below 65 dC.
> +
> +#---------- THERMAL DATA LOG STARTED -----------
> +Samples TargetTemp acpitz0 acpitz1 Fan0 Fan1 Fan2 Fan3 Fan4 Fan5
> +Fan6 Fan7 Fan8 Fan9 Processor10 Processor11 Processor12 Processor13
> +LCD14 intel_powerclamp15 1 65.0 65 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0 2
> +65.0 66 65 0 0 0 0 0 0 0 0 0 0 4 4 4 4 6 0 3 65.0 60 54 0 0 0 0 0 0 0 0
> +0 0 4 4 4 4 6 0 4 65.0 53 53 0 0 0 0 0 0 0 0 0 0 4 4 4 4 6 0
> +5 65.0 52 52 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0
> +6 65.0 53 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0
> +7 65.0 68 70 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0
> +8 65.0 68 68 0 0 0 0 0 0 0 0 0 0 5 5 5 5 6 0
> +9 65.0 68 68 0 0 0 0 0 0 0 0 0 0 6 6 6 6 6 0
> +10 65.0 67 67 0 0 0 0 0 0 0 0 0 0 7 7 7 7 6 0
> +11 65.0 67 67 0 0 0 0 0 0 0 0 0 0 8 8 8 8 6 0
> +12 65.0 67 67 0 0 0 0 0 0 0 0 0 0 8 8 8 8 6 0
> +13 65.0 67 67 0 0 0 0 0 0 0 0 0 0 9 9 9 9 6 0
> +14 65.0 66 66 0 0 0 0 0 0 0 0 0 0 10 10 10 10 6 0
> +15 65.0 66 67 0 0 0 0 0 0 0 0 0 0 10 10 10 10 6 0
> +16 65.0 66 66 0 0 0 0 0 0 0 0 0 0 11 11 11 11 6 0
> +17 65.0 66 66 0 0 0 0 0 0 0 0 0 0 11 11 11 11 6 0
> +18 65.0 64 61 0 0 0 0 0 0 0 0 0 0 11 11 11 11 6 0
> +19 65.0 60 59 0 0 0 0 0 0 0 0 0 0 12 12 12 12 6 0
> +
> +Data can be read directly into an array by an example R-script below:
> +
> +#!/usr/bin/Rscript
> +tdata <- read.table("/var/tmp/tmon.log", header=T, comment.char="#")
> +attach(tdata)
> +jpeg("tmon.jpg")
> +X11()
> +g_range <- range(0, intel_powerclamp15, TargetTemp, acpitz0)
> +plot( Samples, intel_powerclamp15, col="blue", ylim=g_range, axes=FALSE, ann=FALSE)
> +par(new=TRUE)
> +lines(TargetTemp, type="o", pch=22, lty=2, col="red")
> +dev.off()
> diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c
> new file mode 100644
> index 0000000..5f13fb1
> --- /dev/null
> +++ b/tools/thermal/tmon/tmon.c
> @@ -0,0 +1,350 @@
> +/*
> + * tmon.c Thermal Monitor (TMON) main function and entry point
> + *
> + * Copyright (C) 2012 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 or later as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Author: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> + *
> + */
> +
> +#include <getopt.h>
> +#include <unistd.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <ncurses.h>
> +#include <ctype.h>
> +#include <time.h>
> +#include <signal.h>
> +#include <limits.h>
> +#include <sys/time.h>
> +#include <pthread.h>
> +#include <math.h>
> +#include <stdarg.h>
> +#include <syslog.h>
> +
> +#include "tmon.h"
> +
> +unsigned long ticktime = 1; /* seconds */
> +unsigned long no_control = 1; /* monitoring only or use cooling device for
> + * temperature control.
> + */
> +double time_elapsed = 0.0;
> +unsigned long target_temp_user = 65; /* can be select by tui later */
> +int dialogue_on;
> +int tmon_exit;
> +static short daemon_mode;
> +static int logging; /* for recording thermal data to a file */
> +static int debug_on;
> +FILE *tmon_log;
> +char ctrl_cdev[CDEV_NAME_SIZE]; /*cooling device used for the PID controller */
> +int target_thermal_zone; /* user selected target zone instance */
> +static void start_daemon_mode(void);
> +
> +pthread_t event_tid;
> +pthread_mutex_t input_lock;
> +void usage()
> +{
> + printf("Usage: tmon [OPTION...]\n");
> + printf(" -c, --control cooling device in control\n");
> + printf(" -d, --daemon run as daemon, no TUI\n");
> + printf(" -g, --debug debug message in syslog\n");
> + printf(" -h, --help show this help message\n");
> + printf(" -l, --log log data to /var/tmp/tmon.log\n");
> + printf(" -t, --time-interval sampling time interval, > 1 sec.\n");
> + printf(" -v, --version show version\n");
> + printf(" -z, --zone target thermal zone id\n");
> +
> + exit(0);
> +}
> +
> +void version()
> +{
> + printf("TMON version %s\n", VERSION);
> + exit(EXIT_SUCCESS);
> +}
> +
> +static void tmon_cleanup(void)
> +{
> +
> + syslog(LOG_INFO, "TMON exit cleanup\n");
> + fflush(stdout);
> + refresh();
> + if (tmon_log)
> + fclose(tmon_log);
> + if (event_tid) {
> + pthread_mutex_lock(&input_lock);
> + pthread_cancel(event_tid);
> + pthread_mutex_unlock(&input_lock);
> + pthread_mutex_destroy(&input_lock);
> + }
> + closelog();
> + /* relax control knobs, undo throttling */
> + set_ctrl_state(0);
> +
> + keypad(stdscr, FALSE);
> + echo();
> + nocbreak();
> + close_windows();
> + endwin();
> + free_thermal_data();
> +
> + exit(1);
> +}
> +
> +
> +static void tmon_sig_handler(int sig)
> +{
> + syslog(LOG_INFO, "TMON caught signal %d\n", sig);
> + refresh();
> + switch (sig) {
> + case SIGTERM:
> + printf("sigterm, exit and clean up\n");
> + fflush(stdout);
> + break;
> + case SIGKILL:
> + printf("sigkill, exit and clean up\n");
> + fflush(stdout);
> + break;
> + case SIGINT:
> + printf("ctrl-c, exit and clean up\n");
> + fflush(stdout);
> + break;
> + default:
> + break;
> + }
> + tmon_exit = true;
> +}
> +
> +
> +static void start_syslog(void)
> +{
> + if (debug_on)
> + setlogmask(LOG_UPTO(LOG_DEBUG));
> + else
> + setlogmask(LOG_UPTO(LOG_ERR));
> + openlog("tmon.log", LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL0);
> + syslog(LOG_NOTICE, "TMON started by User %d", getuid());
> +}
> +
> +static void prepare_logging(void)
> +{
> + int i;
> +
> + if (!logging)
> + return;
> + /* open local data log file */
> + tmon_log = fopen(TMON_LOG_FILE, "w+");
> + if (!tmon_log) {
> + syslog(LOG_ERR, "failed to open log file %s\n", TMON_LOG_FILE);
> + return;
> + }
> +
> + fprintf(tmon_log, "#----------- THERMAL SYSTEM CONFIG -------------\n");
> + for (i = 0; i < ptdata.nr_tz_sensor; i++) {
> + char binding_str[33]; /* size of long + 1 */
> + int j;
> +
> + memset(binding_str, 0, sizeof(binding_str));
> + for (j = 0; j < 32; j++)
> + binding_str[j] = (ptdata.tzi[i].cdev_binding & 1<<j) ?
> + '1' : '0';
> +
> + fprintf(tmon_log, "#thermal zone %s%02d cdevs binding: %32s\n",
> + ptdata.tzi[i].type,
> + ptdata.tzi[i].instance,
> + binding_str);
> + for (j = 0; j < ptdata.tzi[i].nr_trip_pts; j++) {
> + fprintf(tmon_log, "#\tTP%02d type:%s, temp:%lu\n", j,
> + trip_type_name[ptdata.tzi[i].tp[j].type],
> + ptdata.tzi[i].tp[j].temp);
> + }
> +
> + }
> +
> + for (i = 0; i < ptdata.nr_cooling_dev; i++)
> + fprintf(tmon_log, "#cooling devices%02d: %s\n",
> + i, ptdata.cdi[i].type);
> +
> + fprintf(tmon_log, "#---------- THERMAL DATA LOG STARTED -----------\n");
> + fprintf(tmon_log, "Samples TargetTemp ");
> + for (i = 0; i < ptdata.nr_tz_sensor; i++) {
> + fprintf(tmon_log, "%s%d ", ptdata.tzi[i].type,
> + ptdata.tzi[i].instance);
> + }
> + for (i = 0; i < ptdata.nr_cooling_dev; i++)
> + fprintf(tmon_log, "%s%d ", ptdata.cdi[i].type,
> + ptdata.cdi[i].instance);
> +
> + fprintf(tmon_log, "\n");
> +}
> +
> +static struct option opts[] = {
> + { "control", 1, NULL, 'c' },
> + { "daemon", 0, NULL, 'd' },
> + { "time-interval", 1, NULL, 't' },
> + { "log", 0, NULL, 'l' },
> + { "help", 0, NULL, 'h' },
> + { "version", 0, NULL, 'v' },
> + { "debug", 0, NULL, 'g' },
> + { 0, 0, NULL, 0 }
> +};
> +
> +
> +int main(int argc, char **argv)
> +{
> + int err = 0;
> + int id2 = 0, c;
> + double yk = 0.0; /* controller output */
> + int target_tz_index;
> +
> + if (geteuid() != 0) {
> + printf("TMON needs to be run as root\n");
> + exit(EXIT_FAILURE);
> + }
> +
> + while ((c = getopt_long(argc, argv, "c:dlht:vgz:", opts, &id2)) != -1) {
> + switch (c) {
> + case 'c':
> + no_control = 0;
> + strncpy(ctrl_cdev, optarg, CDEV_NAME_SIZE);
> + break;
> + case 'd':
> + start_daemon_mode();
> + printf("Run TMON in daemon mode\n");
> + break;
> + case 't':
> + ticktime = strtod(optarg, NULL);
> + if (ticktime < 1)
> + ticktime = 1;
> + break;
> + case 'l':
> + printf("Logging data to /var/tmp/tmon.log\n");
> + logging = 1;
> + break;
> + case 'h':
> + usage();
> + break;
> + case 'v':
> + version();
> + break;
> + case 'g':
> + debug_on = 1;
> + break;
> + case 'z':
> + target_thermal_zone = strtod(optarg, NULL);
> + break;
> + default:
> + break;
> + }
> + }
> + if (pthread_mutex_init(&input_lock, NULL) != 0) {
> + printf("\n mutex init failed\n");
> + return 1;
> + }
> + start_syslog();
> + if (signal(SIGINT, tmon_sig_handler) == SIG_ERR)
> + syslog(LOG_DEBUG, "Cannot handle SIGINT\n");
> + if (signal(SIGTERM, tmon_sig_handler) == SIG_ERR)
> + syslog(LOG_DEBUG, "Cannot handle SIGINT\n");
> +
> + if (probe_thermal_sysfs()) {
> + closelog();
> + return -1;
> + }
> + initialize_curses();
> + setup_windows();
> + signal(SIGWINCH, resize_handler);
> + show_title_bar();
> + show_sensors_w();
> + show_cooling_device();
> + update_thermal_data();
> + show_data_w();
> + prepare_logging();
> + init_thermal_controller();
> +
> + nodelay(stdscr, TRUE);
> + err = pthread_create(&event_tid, NULL, &handle_tui_events, NULL);
> + if (err != 0) {
> + printf("\ncan't create thread :[%s]", strerror(err));
> + tmon_cleanup();
> + exit(EXIT_FAILURE);
> + }
> +
> + /* validate range of user selected target zone, default to the first
> + * instance if out of range
> + */
> + target_tz_index = zone_instance_to_index(target_thermal_zone);
> + if (target_tz_index < 0) {
> + target_thermal_zone = ptdata.tzi[0].instance;
> + syslog(LOG_ERR, "target zone is not found, default to %d\n",
> + target_thermal_zone);
> + }
> + while (1) {
> + sleep(ticktime);
> + show_title_bar();
> + show_sensors_w();
> + update_thermal_data();
> + if (!dialogue_on) {
> + show_data_w();
> + show_cooling_device();
> + }
> + cur_thermal_record++;
> + time_elapsed += ticktime;
> + controller_handler(trec[0].temp[target_tz_index] / 1000,
> + &yk);
> + trec[0].pid_out_pct = yk;
> + if (!dialogue_on)
> + show_control_w();
> + if (tmon_exit)
> + break;
> + }
> + tmon_cleanup();
> + return 0;
> +}
> +
> +static void start_daemon_mode()
> +{
> + daemon_mode = 1;
> + /* fork */
> + pid_t sid, pid = fork();
> + if (pid < 0) {
> + exit(EXIT_FAILURE);
> + } else if (pid > 0)
> + /* kill parent */
> + exit(EXIT_SUCCESS);
> +
> + /* disable TUI, it may not be necessary, but saves some resource */
> + disable_tui();
> +
> + /* change the file mode mask */
> + umask(0);
> +
> + /* new SID for the daemon process */
> + sid = setsid();
> + if (sid < 0)
> + exit(EXIT_FAILURE);
> +
> + /* change working directory */
> + if ((chdir("/")) < 0)
> + exit(EXIT_FAILURE);
> +
> +
> + sleep(10);
> +
> + close(STDIN_FILENO);
> + close(STDOUT_FILENO);
> + close(STDERR_FILENO);
> +
> +}
> diff --git a/tools/thermal/tmon/tmon.h b/tools/thermal/tmon/tmon.h
> new file mode 100644
> index 0000000..9e3c49c
> --- /dev/null
> +++ b/tools/thermal/tmon/tmon.h
> @@ -0,0 +1,204 @@
> +/*
> + * tmon.h contains data structures and constants used by TMON
> + *
> + * Copyright (C) 2012 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 or later as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Author Name Jacob Pan <jacob.jun.pan@...ux.intel.com>
> + *
> + */
> +
> +#ifndef TMON_H
> +#define TMON_H
> +
> +#define MAX_DISP_TEMP 125
> +#define MAX_CTRL_TEMP 105
> +#define MIN_CTRL_TEMP 40
> +#define MAX_NR_TZONE 16
> +#define MAX_NR_CDEV 32
> +#define MAX_NR_TRIP 16
> +#define MAX_NR_CDEV_TRIP 12 /* number of cooling devices that can bind
> + * to a thermal zone trip.
> + */
> +#define MAX_TEMP_KC 140000
> +/* starting char position to draw sensor data, such as tz names
> + * trip point list, etc.
> + */
> +#define DATA_LEFT_ALIGN 10
> +#define NR_LINES_TZDATA 1
> +#define TMON_LOG_FILE "/var/tmp/tmon.log"
> +
> +extern unsigned long ticktime;
> +extern double time_elapsed;
> +extern unsigned long target_temp_user;
> +extern int dialogue_on;
> +extern char ctrl_cdev[];
> +extern pthread_mutex_t input_lock;
> +extern int tmon_exit;
> +extern int target_thermal_zone;
> +/* use fixed size record to simplify data processing and transfer
> + * TBD: more info to be added, e.g. programmable trip point data.
> +*/
> +struct thermal_data_record {
> + struct timeval tv;
> + unsigned long temp[MAX_NR_TZONE];
> + double pid_out_pct;
> +};
> +
> +struct cdev_info {
> + char type[64];
> + int instance;
> + unsigned long max_state;
> + unsigned long cur_state;
> + unsigned long flag;
> +};
> +
> +enum trip_type {
> + THERMAL_TRIP_CRITICAL,
> + THERMAL_TRIP_HOT,
> + THERMAL_TRIP_PASSIVE,
> + THERMAL_TRIP_ACTIVE,
> + NR_THERMAL_TRIP_TYPE,
> +};
> +
> +struct trip_point {
> + enum trip_type type;
> + unsigned long temp;
> + unsigned long hysteresis;
> + int attribute; /* programmability etc. */
> +};
> +
> +/* thermal zone configuration information, binding with cooling devices could
> + * change at runtime.
> + */
> +struct tz_info {
> + char type[256]; /* e.g. acpitz */
> + int instance;
> + int passive; /* active zone has passive node to force passive mode */
> + int nr_cdev; /* number of cooling device binded */
> + int nr_trip_pts;
> + struct trip_point tp[MAX_NR_TRIP];
> + unsigned long cdev_binding; /* bitmap for attached cdevs */
> + /* cdev bind trip points, allow one cdev bind to multiple trips */
> + unsigned long trip_binding[MAX_NR_CDEV];
> +};
> +
> +struct tmon_platform_data {
> + int nr_tz_sensor;
> + int nr_cooling_dev;
> + /* keep track of instance ids since there might be gaps */
> + int max_tz_instance;
> + int max_cdev_instance;
> + struct tz_info *tzi;
> + struct cdev_info *cdi;
> +};
> +
> +struct control_ops {
> + void (*set_ratio)(unsigned long ratio);
> + unsigned long (*get_ratio)(unsigned long ratio);
> +
> +};
> +
> +enum cdev_types {
> + CDEV_TYPE_PROC,
> + CDEV_TYPE_FAN,
> + CDEV_TYPE_MEM,
> + CDEV_TYPE_NR,
> +};
> +
> +/* REVISIT: the idea is to group sensors if possible, e.g. on intel mid
> + * we have "skin0", "skin1", "sys", "msicdie"
> + * on DPTF enabled systems, we might have PCH, TSKN, TAMB, etc.
> + */
> +enum tzone_types {
> + TZONE_TYPE_ACPI,
> + TZONE_TYPE_PCH,
> + TZONE_TYPE_NR,
> +};
> +
> +/* limit the output of PID controller adjustment */
> +#define LIMIT_HIGH (95)
> +#define LIMIT_LOW (2)
> +
> +struct pid_params {
> + double kp; /* Controller gain from Dialog Box */
> + double ki; /* Time-constant for I action from Dialog Box */
> + double kd; /* Time-constant for D action from Dialog Box */
> + double ts;
> + double k_lpf;
> +
> + double t_target;
> + double y_k;
> +};
> +
> +extern int init_thermal_controller(void);
> +extern void controller_handler(const double xk, double *yk);
> +
> +extern struct tmon_platform_data ptdata;
> +extern struct pid_params p_param;
> +
> +extern FILE *tmon_log;
> +extern int cur_thermal_record; /* index to the trec array */
> +extern struct thermal_data_record trec[];
> +extern const char *trip_type_name[];
> +extern unsigned long no_control;
> +
> +extern void initialize_curses(void);
> +extern void show_controller_stats(char *line);
> +extern void show_title_bar(void);
> +extern void setup_windows(void);
> +extern void disable_tui(void);
> +extern void show_sensors_w(void);
> +extern void show_data_w(void);
> +extern void write_status_bar(int x, char *line);
> +extern void show_control_w();
> +
> +extern void show_cooling_device(void);
> +extern void show_dialogue(void);
> +extern int update_thermal_data(void);
> +
> +extern int probe_thermal_sysfs(void);
> +extern void free_thermal_data(void);
> +extern void resize_handler(int sig);
> +extern void set_ctrl_state(unsigned long state);
> +extern void get_ctrl_state(unsigned long *state);
> +extern void *handle_tui_events(void *arg);
> +extern int sysfs_set_ulong(char *path, char *filename, unsigned long val);
> +extern int zone_instance_to_index(int zone_inst);
> +extern void close_windows(void);
> +
> +#define PT_COLOR_DEFAULT 1
> +#define PT_COLOR_HEADER_BAR 2
> +#define PT_COLOR_ERROR 3
> +#define PT_COLOR_RED 4
> +#define PT_COLOR_YELLOW 5
> +#define PT_COLOR_GREEN 6
> +#define PT_COLOR_BRIGHT 7
> +#define PT_COLOR_BLUE 8
> +
> +/* each thermal zone uses 12 chars, 8 for name, 2 for instance, 2 space
> + * also used to list trip points in forms of AAAC, which represents
> + * A: Active
> + * C: Critical
> + */
> +#define TZONE_RECORD_SIZE 12
> +#define TZ_LEFT_ALIGN 32
> +#define CDEV_NAME_SIZE 20
> +#define CDEV_FLAG_IN_CONTROL (1 << 0)
> +
> +/* dialogue box starts */
> +#define DIAG_X 48
> +#define DIAG_Y 8
> +#define THERMAL_SYSFS "/sys/class/thermal"
> +#define CDEV "cooling_device"
> +#define TZONE "thermal_zone"
> +#define TDATA_LEFT 16
> +#endif /* TMON_H */
> diff --git a/tools/thermal/tmon/tui.c b/tools/thermal/tmon/tui.c
> new file mode 100644
> index 0000000..957ecf3
> --- /dev/null
> +++ b/tools/thermal/tmon/tui.c
> @@ -0,0 +1,631 @@
> +/*
> + * tui.c ncurses text user interface for TMON program
> + *
> + * Copyright (C) 2013 Intel Corporation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 or later as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Author: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> + *
> + */
> +
> +#include <unistd.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <stdint.h>
> +#include <ncurses.h>
> +#include <time.h>
> +#include <syslog.h>
> +#include <panel.h>
> +#include <pthread.h>
> +#include <signal.h>
> +
> +#include "tmon.h"
> +
> +static PANEL *data_panel;
> +static PANEL *dialogue_panel;
> +static PANEL *top;
> +
> +static WINDOW *title_bar_window;
> +static WINDOW *tz_sensor_window;
> +static WINDOW *cooling_device_window;
> +static WINDOW *control_window;
> +static WINDOW *status_bar_window;
> +static WINDOW *thermal_data_window;
> +static WINDOW *dialogue_window;
> +
> +char status_bar_slots[10][40];
> +static void draw_hbar(WINDOW *win, int y, int start, int len,
> + unsigned long pattern, bool end);
> +
> +static int maxx, maxy;
> +static int maxwidth = 200;
> +
> +#define TITLE_BAR_HIGHT 1
> +#define SENSOR_WIN_HIGHT 4 /* one row for tz name, one for trip points */
> +
> +
> +/* daemon mode flag (set by startup parameter -d) */
> +static int tui_disabled;
> +
> +static void close_panel(PANEL *p)
> +{
> + if (p) {
> + del_panel(p);
> + p = NULL;
> + }
> +}
> +
> +static void close_window(WINDOW *win)
> +{
> + if (win) {
> + delwin(win);
> + win = NULL;
> + }
> +}
> +
> +void close_windows(void)
> +{
> + if (tui_disabled)
> + return;
> + /* must delete panels before their attached windows */
> + if (dialogue_window)
> + close_panel(dialogue_panel);
> + if (cooling_device_window)
> + close_panel(data_panel);
> +
> + close_window(title_bar_window);
> + close_window(tz_sensor_window);
> + close_window(status_bar_window);
> + close_window(cooling_device_window);
> + close_window(control_window);
> + close_window(thermal_data_window);
> + close_window(dialogue_window);
> +
> +}
> +
> +void write_status_bar(int x, char *line)
> +{
> + mvwprintw(status_bar_window, 0, x, "%s", line);
> + wrefresh(status_bar_window);
> +}
> +
> +void setup_windows(void)
> +{
> + int y_begin = 1;
> +
> + if (tui_disabled)
> + return;
> +
> + getmaxyx(stdscr, maxy, maxx);
> + resizeterm(maxy, maxx);
> +
> + title_bar_window = subwin(stdscr, TITLE_BAR_HIGHT, maxx, 0, 0);
> + y_begin += TITLE_BAR_HIGHT;
> +
> + tz_sensor_window = subwin(stdscr, SENSOR_WIN_HIGHT, maxx, y_begin, 0);
> + y_begin += SENSOR_WIN_HIGHT;
> +
> + cooling_device_window = subwin(stdscr, ptdata.nr_cooling_dev + 3, maxx,
> + y_begin, 0);
> + y_begin += ptdata.nr_cooling_dev + 3; /* 2 lines for border */
> + /* two lines to show borders, one line per tz show trip point position
> + * and value.
> + * dialogue window is a pop-up, when needed it lays on top of cdev win
> + */
> +
> + dialogue_window = subwin(stdscr, ptdata.nr_cooling_dev+5, maxx-50,
> + DIAG_Y, DIAG_X);
> +
> + thermal_data_window = subwin(stdscr, ptdata.nr_tz_sensor *
> + NR_LINES_TZDATA + 3, maxx, y_begin, 0);
> + y_begin += ptdata.nr_tz_sensor * NR_LINES_TZDATA + 3;
> + control_window = subwin(stdscr, 4, maxx, y_begin, 0);
> +
> + scrollok(cooling_device_window, TRUE);
> + maxwidth = maxx - 18;
> + status_bar_window = subwin(stdscr, 1, maxx, maxy-1, 0);
> +
> + strcpy(status_bar_slots[0], " Ctrl-c - Quit ");
> + strcpy(status_bar_slots[1], " TAB - Tuning ");
> + wmove(status_bar_window, 1, 30);
> +
> + /* prepare panels for dialogue, if panel already created then we must
> + * be doing resizing, so just replace windows with new ones, old ones
> + * should have been deleted by close_window
> + */
> + data_panel = new_panel(cooling_device_window);
> + if (!data_panel)
> + syslog(LOG_DEBUG, "No data panel\n");
> + else {
> + if (dialogue_window) {
> + dialogue_panel = new_panel(dialogue_window);
> + if (!dialogue_panel)
> + syslog(LOG_DEBUG, "No dialogue panel\n");
> + else {
> + /* Set up the user pointer to the next panel*/
> + set_panel_userptr(data_panel, dialogue_panel);
> + set_panel_userptr(dialogue_panel, data_panel);
> + top = data_panel;
> + }
> + } else
> + syslog(LOG_INFO, "no dialogue win, term too small\n");
> + }
> + doupdate();
> + werase(stdscr);
> + refresh();
> +}
> +
> +void resize_handler(int sig)
> +{
> + /* start over when term gets resized, but first we clean up */
> + close_windows();
> + endwin();
> + refresh();
> + clear();
> + getmaxyx(stdscr, maxy, maxx); /* get the new screen size */
> + setup_windows();
> + /* rate limit */
> + sleep(1);
> + syslog(LOG_DEBUG, "SIG %d, term resized to %d x %d\n",
> + sig, maxy, maxx);
> + signal(SIGWINCH, resize_handler);
> +}
> +
> +const char cdev_title[] = " COOLING DEVICES ";
> +void show_cooling_device(void)
> +{
> + int i, j, x, y = 0;
> +
> + if (tui_disabled || !cooling_device_window)
> + return;
> +
> + werase(cooling_device_window);
> +
> + wattron(cooling_device_window, A_BOLD);
> + mvwprintw(cooling_device_window, 0, maxx/2 - sizeof(cdev_title),
> + cdev_title);
> +
> + mvwprintw(cooling_device_window, 1, 1,
> + "ID Cooling Dev Cur Max Thermal Zone Binding");
> + wattroff(cooling_device_window, A_BOLD);
> + for (j = 0; j < ptdata.nr_cooling_dev; j++) {
> + /* draw cooling device list on the left in the order of
> + * cooling device instances. skip unused idr.
> + */
> + mvwprintw(cooling_device_window, j + 2, 1,
> + "%02d %12.12s%6d %6d",
> + ptdata.cdi[j].instance,
> + ptdata.cdi[j].type,
> + ptdata.cdi[j].cur_state,
> + ptdata.cdi[j].max_state);
> + }
> +
> + /* show cdev binding, y is the global cooling device instance */
> + for (i = 0; i < ptdata.nr_tz_sensor; i++) {
> + int tz_inst = ptdata.tzi[i].instance;
> + for (j = 0; j < ptdata.nr_cooling_dev; j++) {
> + int cdev_inst;
> + y = j;
> + x = tz_inst * TZONE_RECORD_SIZE + TZ_LEFT_ALIGN;
> +
> + draw_hbar(cooling_device_window, y+2, x,
> + TZONE_RECORD_SIZE-1, ACS_VLINE, false);
> +
> + /* draw a column of spaces to separate thermal zones */
> + mvwprintw(cooling_device_window, y+2, x-1, " ");
> + if (ptdata.tzi[i].cdev_binding) {
> + cdev_inst = ptdata.cdi[j].instance;
> + unsigned long trip_binding =
> + ptdata.tzi[i].trip_binding[cdev_inst];
> + int k = 0; /* per zone trip point id that
> + * binded to this cdev, one to
> + * many possible based on the
> + * binding bitmask.
> + */
> + syslog(LOG_DEBUG,
> + "bind tz%d cdev%d tp%lx %d cdev%lx\n",
> + i, j, trip_binding, y,
> + ptdata.tzi[i].cdev_binding);
> + /* draw each trip binding for the cdev */
> + while (trip_binding >>= 1) {
> + k++;
> + if (!(trip_binding & 1))
> + continue;
> + /* draw '*' to show binding */
> + mvwprintw(cooling_device_window,
> + y + 2,
> + x + ptdata.tzi[i].nr_trip_pts -
> + k - 1, "*");
> + }
> + }
> + }
> + }
> + wborder(cooling_device_window, 0, 0, 0, 0, 0, 0, 0, 0);
> + wrefresh(cooling_device_window);
> +}
> +
> +const char DIAG_TITLE[] = "[ TUNABLES ]";
> +#define DIAG_DEV_ROWS 5
> +void show_dialogue(void)
> +{
> + int j, x = 0, y = 0;
> + WINDOW *w = dialogue_window;
> +
> + if (tui_disabled || !w)
> + return;
> +
> + werase(w);
> + box(w, 0, 0);
> + mvwprintw(w, 0, maxx/4, DIAG_TITLE);
> + /* list all the available tunables */
> + for (j = 0; j <= ptdata.nr_cooling_dev; j++) {
> + y = j % DIAG_DEV_ROWS;
> + if (y == 0 && j != 0)
> + x += 20;
> + if (j == ptdata.nr_cooling_dev)
> + /* save last choice for target temp */
> + mvwprintw(w, y+1, x+1, "%C-%.12s", 'A'+j, "Set Temp");
> + else
> + mvwprintw(w, y+1, x+1, "%C-%.10s-%2d", 'A'+j,
> + ptdata.cdi[j].type, ptdata.cdi[j].instance);
> + }
> + wattron(w, A_BOLD);
> + mvwprintw(w, DIAG_DEV_ROWS+1, 1, "Enter Choice [A-Z]?");
> + wattroff(w, A_BOLD);
> + /* y size of dialogue win is nr cdev + 5, so print legend
> + * at the bottom line
> + */
> + mvwprintw(w, ptdata.nr_cooling_dev+3, 1,
> + "Legend: A=Active, P=Passive, C=Critical");
> +
> + wrefresh(dialogue_window);
> +}
> +
> +void write_dialogue_win(char *buf, int y, int x)
> +{
> + WINDOW *w = dialogue_window;
> +
> + mvwprintw(w, y, x, "%s", buf);
> +}
> +
> +const char control_title[] = " CONTROLS ";
> +void show_control_w(void)
> +{
> + unsigned long state;
> +
> + get_ctrl_state(&state);
> +
> + if (tui_disabled || !control_window)
> + return;
> +
> + werase(control_window);
> + wattron(control_window, A_BOLD);
> + mvwprintw(control_window, 0, maxx/2 - sizeof(control_title),
> + control_title);
> + wattroff(control_window, A_BOLD);
> +
> + mvwprintw(control_window, 1, 1, "PID gain: kp=%2.2f ki=%2.2f, kd=%2.2f",
> + p_param.kp, p_param.ki, p_param.kd);
> +
> + mvwprintw(control_window, 2, 1,
> + "Target Temp: %2.1f, Zone: %d, Control Device: %.12s, PID output: %2.2f, state: %d",
> + target_thermal_zone, ctrl_cdev,
> + p_param.t_target, p_param.y_k, state);
> + /* draw border last such that everything is within boundary */
> + wborder(control_window, 0, 0, 0, 0, 0, 0, 0, 0);
> + wrefresh(control_window);
> +}
> +
> +void initialize_curses(void)
> +{
> + if (tui_disabled)
> + return;
> +
> + initscr();
> + start_color();
> + keypad(stdscr, TRUE); /* enable keyboard mapping */
> + nonl(); /* tell curses not to do NL->CR/NL on output */
> + cbreak(); /* take input chars one at a time */
> + noecho(); /* dont echo input */
> + curs_set(0); /* turn off cursor */
> + use_default_colors();
> +
> + init_pair(PT_COLOR_DEFAULT, COLOR_WHITE, COLOR_BLACK);
> + init_pair(PT_COLOR_HEADER_BAR, COLOR_BLACK, COLOR_WHITE);
> + init_pair(PT_COLOR_ERROR, COLOR_BLACK, COLOR_RED);
> + init_pair(PT_COLOR_RED, COLOR_WHITE, COLOR_RED);
> + init_pair(PT_COLOR_YELLOW, COLOR_WHITE, COLOR_YELLOW);
> + init_pair(PT_COLOR_GREEN, COLOR_WHITE, COLOR_GREEN);
> + init_pair(PT_COLOR_BLUE, COLOR_WHITE, COLOR_BLUE);
> + init_pair(PT_COLOR_BRIGHT, COLOR_WHITE, COLOR_BLACK);
> +
> +}
> +
> +void show_title_bar(void)
> +{
> + int i;
> + int x = 0;
> +
> + if (tui_disabled || !title_bar_window)
> + return;
> +
> + wattrset(title_bar_window, COLOR_PAIR(PT_COLOR_HEADER_BAR));
> + wbkgd(title_bar_window, COLOR_PAIR(PT_COLOR_HEADER_BAR));
> + werase(title_bar_window);
> +
> + mvwprintw(title_bar_window, 0, 0,
> + " TMON v%s", VERSION);
> +
> + wrefresh(title_bar_window);
> +
> + werase(status_bar_window);
> +
> + for (i = 0; i < 10; i++) {
> + if (strlen(status_bar_slots[i]) == 0)
> + continue;
> + wattron(status_bar_window, A_REVERSE);
> + mvwprintw(status_bar_window, 0, x, "%s", status_bar_slots[i]);
> + wattroff(status_bar_window, A_REVERSE);
> + x += strlen(status_bar_slots[i]) + 1;
> + }
> + wrefresh(status_bar_window);
> +}
> +
> +static void handle_input_val(int ch)
> +{
> + char buf[32];
> + int val;
> + char path[256];
> + WINDOW *w = dialogue_window;
> +
> + echo();
> + keypad(w, TRUE);
> + wgetnstr(w, buf, 31);
> + val = atoi(buf);
> +
> + if (ch == ptdata.nr_cooling_dev) {
> + snprintf(buf, 31, "Invalid Temp %d! %d-%d", val,
> + MIN_CTRL_TEMP, MAX_CTRL_TEMP);
> + if (val < MIN_CTRL_TEMP || val > MAX_CTRL_TEMP)
> + write_status_bar(40, buf);
> + else {
> + p_param.t_target = val;
> + snprintf(buf, 31, "Set New Target Temp %d", val);
> + write_status_bar(40, buf);
> + }
> + } else {
> + snprintf(path, 256, "%s/%s%d", THERMAL_SYSFS,
> + CDEV, ptdata.cdi[ch].instance);
> + sysfs_set_ulong(path, "cur_state", val);
> + }
> + noecho();
> + dialogue_on = 0;
> + show_data_w();
> + show_control_w();
> +
> + top = (PANEL *)panel_userptr(top);
> + top_panel(top);
> +}
> +
> +static void handle_input_choice(int ch)
> +{
> + char buf[48];
> + int base = 0;
> + int cdev_id = 0;
> +
> + if ((ch >= 'A' && ch <= 'A' + ptdata.nr_cooling_dev) ||
> + (ch >= 'a' && ch <= 'a' + ptdata.nr_cooling_dev)) {
> + base = (ch < 'a') ? 'A' : 'a';
> + cdev_id = ch - base;
> + if (ptdata.nr_cooling_dev == cdev_id)
> + snprintf(buf, sizeof(buf), "New Target Temp:");
> + else
> + snprintf(buf, sizeof(buf), "New Value for %.10s-%2d: ",
> + ptdata.cdi[cdev_id].type,
> + ptdata.cdi[cdev_id].instance);
> + write_dialogue_win(buf, DIAG_DEV_ROWS+2, 2);
> + handle_input_val(cdev_id);
> + } else {
> + snprintf(buf, sizeof(buf), "Invalid selection %d", ch);
> + write_dialogue_win(buf, 8, 2);
> + }
> +}
> +
> +void *handle_tui_events(void *arg)
> +{
> + int ch;
> +
> + keypad(cooling_device_window, TRUE);
> + while ((ch = wgetch(cooling_device_window)) != EOF) {
> + if (tmon_exit)
> + break;
> + /* when term size is too small, no dialogue panels are set.
> + * we need to filter out such cases.
> + */
> + if (!data_panel || !dialogue_panel ||
> + !cooling_device_window ||
> + !dialogue_window) {
> +
> + continue;
> + }
> + pthread_mutex_lock(&input_lock);
> + if (dialogue_on) {
> + handle_input_choice(ch);
> + /* top panel filter */
> + if (ch == 'q' || ch == 'Q')
> + ch = 0;
> + }
> + switch (ch) {
> + case KEY_LEFT:
> + box(cooling_device_window, 10, 0);
> + break;
> + case 9: /* TAB */
> + top = (PANEL *)panel_userptr(top);
> + top_panel(top);
> + if (top == dialogue_panel) {
> + dialogue_on = 1;
> + show_dialogue();
> + } else {
> + dialogue_on = 0;
> + /* force refresh */
> + show_data_w();
> + show_control_w();
> + }
> + break;
> + case 'q':
> + case 'Q':
> + tmon_exit = 1;
> + break;
> + }
> + update_panels();
> + doupdate();
> + pthread_mutex_unlock(&input_lock);
> + }
> +
> + if (arg)
> + *(int *)arg = 0; /* make gcc happy */
> +
> + return NULL;
> +}
> +
> +/* draw a horizontal bar in given pattern */
> +static void draw_hbar(WINDOW *win, int y, int start, int len, unsigned long ptn,
> + bool end)
> +{
> + mvwaddch(win, y, start, ptn);
> + whline(win, ptn, len);
> + if (end)
> + mvwaddch(win, y, MAX_DISP_TEMP+TDATA_LEFT, ']');
> +}
> +
> +static char trip_type_to_char(int type)
> +{
> + switch (type) {
> + case THERMAL_TRIP_CRITICAL: return 'C';
> + case THERMAL_TRIP_HOT: return 'H';
> + case THERMAL_TRIP_PASSIVE: return 'P';
> + case THERMAL_TRIP_ACTIVE: return 'A';
> + default:
> + return '?';
> + }
> +}
> +
> +/* fill a string with trip point type and value in one line
> + * e.g. P(56) C(106)
> + * maintain the distance one degree per char
> + */
> +static void draw_tp_line(int tz, int y)
> +{
> + int j;
> + int x;
> +
> + for (j = 0; j < ptdata.tzi[tz].nr_trip_pts; j++) {
> + x = ptdata.tzi[tz].tp[j].temp / 1000;
> + mvwprintw(thermal_data_window, y + 0, x + TDATA_LEFT,
> + "%c%d", trip_type_to_char(ptdata.tzi[tz].tp[j].type),
> + x);
> + syslog(LOG_INFO, "%s:tz %d tp %d temp = %lu\n", __func__,
> + tz, j, ptdata.tzi[tz].tp[j].temp);
> + }
> +}
> +
> +const char data_win_title[] = " THERMAL DATA ";
> +void show_data_w(void)
> +{
> + int i;
> +
> +
> + if (tui_disabled || !thermal_data_window)
> + return;
> +
> + werase(thermal_data_window);
> + wattron(thermal_data_window, A_BOLD);
> + mvwprintw(thermal_data_window, 0, maxx/2 - sizeof(data_win_title),
> + data_win_title);
> + wattroff(thermal_data_window, A_BOLD);
> + /* draw a line as ruler */
> + for (i = 10; i < MAX_DISP_TEMP; i += 10)
> + mvwprintw(thermal_data_window, 1, i+TDATA_LEFT, "%2d", i);
> +
> + for (i = 0; i < ptdata.nr_tz_sensor; i++) {
> + int temp = trec[cur_thermal_record].temp[i] / 1000;
> + int y = 0;
> +
> + y = i * NR_LINES_TZDATA + 2;
> + /* y at tz temp data line */
> + mvwprintw(thermal_data_window, y, 1, "%6.6s%2d:[%3d][",
> + ptdata.tzi[i].type,
> + ptdata.tzi[i].instance, temp);
> + draw_hbar(thermal_data_window, y, TDATA_LEFT, temp, ACS_RARROW,
> + true);
> + draw_tp_line(i, y);
> + }
> + wborder(thermal_data_window, 0, 0, 0, 0, 0, 0, 0, 0);
> + wrefresh(thermal_data_window);
> +}
> +
> +const char tz_title[] = "THERMAL ZONES/SENSORS";
> +
> +void show_sensors_w(void)
> +{
> + int i, j;
> + char buffer[512];
> +
> + if (tui_disabled || !tz_sensor_window)
> + return;
> +
> + werase(tz_sensor_window);
> +
> + memset(buffer, 0, sizeof(buffer));
> + wattron(tz_sensor_window, A_BOLD);
> + mvwprintw(tz_sensor_window, 0, maxx/2 - sizeof(tz_title), tz_title);
> + mvwprintw(tz_sensor_window, 1, 1, "Thermal Zones:");
> + wattroff(tz_sensor_window, A_BOLD);
> +
> + mvwprintw(tz_sensor_window, 1, TZ_LEFT_ALIGN, "%s", buffer);
> + /* fill trip points for each tzone */
> + wattron(tz_sensor_window, A_BOLD);
> + mvwprintw(tz_sensor_window, 2, 1, "Trip Points:");
> + wattroff(tz_sensor_window, A_BOLD);
> +
> + /* draw trip point from low to high for each tz */
> + for (i = 0; i < ptdata.nr_tz_sensor; i++) {
> + int inst = ptdata.tzi[i].instance;
> +
> + mvwprintw(tz_sensor_window, 1,
> + TZ_LEFT_ALIGN+TZONE_RECORD_SIZE * inst, "%.9s%02d",
> + ptdata.tzi[i].type, ptdata.tzi[i].instance);
> + for (j = ptdata.tzi[i].nr_trip_pts - 1; j >= 0; j--) {
> + /* loop through all trip points */
> + char type;
> + int tp_pos;
> + /* reverse the order here since trips are sorted
> + * in ascending order in terms of temperature.
> + */
> + tp_pos = ptdata.tzi[i].nr_trip_pts - j - 1;
> +
> + type = trip_type_to_char(ptdata.tzi[i].tp[j].type);
> + mvwaddch(tz_sensor_window, 2,
> + inst * TZONE_RECORD_SIZE + TZ_LEFT_ALIGN +
> + tp_pos, type);
> + syslog(LOG_DEBUG, "draw tz %d tp %d ch:%c\n",
> + inst, j, type);
> + }
> + }
> + wborder(tz_sensor_window, 0, 0, 0, 0, 0, 0, 0, 0);
> + wrefresh(tz_sensor_window);
> +}
> +
> +void disable_tui(void)
> +{
> + tui_disabled = 1;
> +}
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
Download attachment "signature.asc" of type "application/pgp-signature" (296 bytes)
Powered by blists - more mailing lists