[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <2386580.3V2pzai3k2@amdc1032>
Date: Wed, 09 Oct 2013 16:03:54 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
Cc: linux-pm@...r.kernel.org, naveenkrishna.ch@...il.com,
rui.zhang@...el.com, eduardo.valentin@...com,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
amit.daniel@...sung.com, kgene.kim@...sung.com,
devicetree@...r.kernel.org,
Lukasz Majewski <l.majewski@...sung.com>
Subject: Re: [PATCH 1/3 v4] thermal: samsung: correct the fall interrupt en,
status bit fields
Hi,
All patches (#1-#3) look good to me, FWIW you can add:
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Please note that (at least) patch #3 conflicts with Lukasz's EXYNOS4412
fixup patchset:
https://lkml.org/lkml/2013/10/9/35
It is up to Eduardo to resolve this but it probably would be better to
merge EXYNOS4412 fixes first and then add EXYNOS5420 support. This would
require you to port patch #3 over Lukasz's patchset though.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
On Wednesday, October 09, 2013 05:38:27 PM Naveen Krishna Chatradhi wrote:
> The FALL interrupt related en, status bits are available at an offset of
> 16 on INTEN, INTSTAT registers and at an offset of
> 12 on INTCLEAR register.
>
> This patch corrects the same for exyns5250 and exynos5440
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
> ---
> Changes since v1:
> Changes since v2:
> Changes since v3:
> None
>
> drivers/thermal/samsung/exynos_tmu.c | 2 +-
> drivers/thermal/samsung/exynos_tmu.h | 2 ++
> drivers/thermal/samsung/exynos_tmu_data.c | 2 ++
> drivers/thermal/samsung/exynos_tmu_data.h | 3 ++-
> 4 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index b43afda..af69209 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -265,7 +265,7 @@ skip_calib_data:
> data->base + reg->threshold_th1);
>
> writel((reg->inten_rise_mask << reg->inten_rise_shift) |
> - (reg->inten_fall_mask << reg->inten_fall_shift),
> + (reg->inten_fall_mask << reg->intclr_fall_shift),
> data->base + reg->tmu_intclear);
>
> /* if last threshold limit is also present */
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index b364c9e..7c6c34a 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -134,6 +134,7 @@ enum soc_type {
> * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
> * @tmu_intstat: Register containing the interrupt status values.
> * @tmu_intclear: Register for clearing the raised interrupt status.
> + * @intclr_fall_shift: shift bits for interrupt clear fall 0
> * @emul_con: TMU emulation controller register.
> * @emul_temp_shift: shift bits of emulation temperature.
> * @emul_time_shift: shift bits of emulation time.
> @@ -204,6 +205,7 @@ struct exynos_tmu_registers {
> u32 tmu_intstat;
>
> u32 tmu_intclear;
> + u32 intclr_fall_shift;
>
> u32 emul_con;
> u32 emul_temp_shift;
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 9002499..23fea23 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -122,6 +122,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
> .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
> .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
> .emul_con = EXYNOS_EMUL_CON,
> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
> @@ -210,6 +211,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
> .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
> .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
> .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
> .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
> .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index dc7feb5..8788a87 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -69,9 +69,10 @@
> #define EXYNOS_TMU_RISE_INT_MASK 0x111
> #define EXYNOS_TMU_RISE_INT_SHIFT 0
> #define EXYNOS_TMU_FALL_INT_MASK 0x111
> -#define EXYNOS_TMU_FALL_INT_SHIFT 12
> +#define EXYNOS_TMU_FALL_INT_SHIFT 16
> #define EXYNOS_TMU_CLEAR_RISE_INT 0x111
> #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
> +#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> #define EXYNOS_TMU_TRIP_MODE_MASK 0x7
> #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists