Linux version 3.12.0-rc4-01668-gfd71a04-dirty (mingo@earth5) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #229484 Wed Oct 9 16:59:58 CEST 2013 KERNEL supported cpus: Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU CPU: vendor_id 'AuthenticAMD' unknown, using generic init. CPU: Your system may be unstable. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved console [earlyser0] enabled debug: ignoring loglevel setting. Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x3fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FFC0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 1 areas for low memory corruption initial memory mapped: [mem 0x00000000-0x037fffff] Base memory trampoline at [b009b000] 9b000 size 16384 init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x3f800000-0x3fbfffff] [mem 0x3f800000-0x3fbfffff] page 4k BRK [0x0335b000, 0x0335bfff] PGTABLE init_memory_mapping: [mem 0x38000000-0x3f7fffff] [mem 0x38000000-0x3f7fffff] page 4k BRK [0x0335c000, 0x0335cfff] PGTABLE BRK [0x0335d000, 0x0335dfff] PGTABLE BRK [0x0335e000, 0x0335efff] PGTABLE BRK [0x0335f000, 0x0335ffff] PGTABLE BRK [0x03360000, 0x03360fff] PGTABLE init_memory_mapping: [mem 0x00100000-0x37ffffff] [mem 0x00100000-0x37ffffff] page 4k init_memory_mapping: [mem 0x3fc00000-0x3ffeffff] [mem 0x3fc00000-0x3ffeffff] page 4k 0MB HIGHMEM available. 1023MB LOWMEM available. mapped low ram: 0 - 3fff0000 low ram: 0 - 3fff0000 Zone ranges: Normal [mem 0x00001000-0x3ffeffff] HighMem empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x3ffeffff] On node 0 totalpages: 262030 free_area_init_node: node 0, pgdat b2cac760, node_mem_map ef214024 Normal zone: 2304 pages used for memmap Normal zone: 0 pages reserved Normal zone: 262030 pages, LIFO batch:31 Using APIC driver default SFI: Simple Firmware Interface v0.81 http://simplefirmware.org No local APIC present or hardware disabled APIC: disable apic facility APIC: switched to apic NOOP ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic_noop.c:113 noop_apic_read+0x29/0x3f() CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0-rc4-01668-gfd71a04-dirty #229484 b286bb7c b2b4def8 b235a604 b2b4df28 b1028784 b286ec98 00000000 00000000 b286bb7c 00000071 b1015bba b1015bba 00000071 00000000 b2dc0000 b2b4df38 b102882f 00000009 00000000 b2b4df40 b1015bba b2b4df48 b10142e8 b2b4df58 Call Trace: [] dump_stack+0x16/0x18 [] warn_slowpath_common+0x73/0x89 [] ? noop_apic_read+0x29/0x3f [] warn_slowpath_null+0x1d/0x1f [] noop_apic_read+0x29/0x3f [] read_apic_id+0x14/0x1f [] init_apic_mappings+0xea/0x140 [] setup_arch+0xa45/0xab3 [] ? printk+0x38/0x3a [] start_kernel+0xb9/0x354 [] i386_start_kernel+0x12e/0x131 ---[ end trace a7919e7f17c0a725 ]--- nr_irqs_gsi: 16 e820: [mem 0x40000000-0xdfffffff] available for PCI devices pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259726 Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200,keep console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3 sysrq: sysrq always enabled. PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 1000788K/1048120K available (19921K kernel code, 1764K rwdata, 8020K rodata, 732K init, 5700K bss, 47332K reserved, 0K highmem) virtual kernel memory layout: fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf07f0000 - 0xff7fe000 ( 240 MB) lowmem : 0xb0000000 - 0xefff0000 (1023 MB) .init : 0xb2d05000 - 0xb2dbc000 ( 732 kB) .data : 0xb237475f - 0xb2d040e0 (9790 kB) .text : 0xb1000000 - 0xb237475f (19921 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. NR_IRQS:2304 nr_irqs:256 16 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic_noop.c:119 noop_apic_write+0x26/0x3b() CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 b286bb7c b2b4df4c b235a604 b2b4df7c b1028784 b286ec98 00000000 00000000 b286bb7c 00000077 b1015b7c b1015b7c 00000077 b2d91900 b2b54460 b2b4df8c b102882f 00000009 00000000 b2b4df94 b1015b7c b2b4df9c b2d0eb47 b2b4dfb4 Call Trace: [] dump_stack+0x16/0x18 [] warn_slowpath_common+0x73/0x89 [] ? noop_apic_write+0x26/0x3b [] warn_slowpath_null+0x1d/0x1f [] noop_apic_write+0x26/0x3b [] init_bsp_APIC+0x64/0xb4 [] init_ISA_irqs+0x16/0x46 [] native_init_IRQ+0xa/0x1ae [] init_IRQ+0x24/0x26 [] start_kernel+0x1f1/0x354 [] ? repair_env_string+0x5e/0x5e [] i386_start_kernel+0x12e/0x131 ---[ end trace a7919e7f17c0a726 ]--- CPU 0 irqstacks, hard=b008c000 soft=b008e000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3551 kB per task-struct memory footprint: 1152 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: A-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed| A-B-B-A deadlock: A-B-B-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed| A-B-B-C-C-A deadlock: A-B-B-C-C-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed| A-B-C-A-B-C deadlock: A-B-C-A-B-C deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed| A-B-B-C-C-D-D-A deadlock: A-B-B-C-C-D-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed| A-B-C-D-B-D-D-A deadlock: A-B-C-D-B-D-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed| A-B-C-D-B-C-D-A deadlock: A-B-C-D-B-C-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed| double unlock: double unlock: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | initialize held: initialize held: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | bad unlock order: bad unlock order: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: recursive read-lock: | | ok | ok | | |failed|failed| recursive read-lock #2: recursive read-lock #2: | | ok | ok | | |failed|failed| mixed read-write-lock: mixed read-write-lock: | |failed|failed| | |failed|failed| mixed write-read-lock: mixed write-read-lock: | |failed|failed| | |failed|failed| -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: hard-irqs-on + irq-safe-A/12:failed|failed|failed|failed| ok | ok | soft-irqs-on + irq-safe-A/12: soft-irqs-on + irq-safe-A/12:failed|failed|failed|failed| ok | ok | hard-irqs-on + irq-safe-A/21: hard-irqs-on + irq-safe-A/21:failed|failed|failed|failed| ok | ok | soft-irqs-on + irq-safe-A/21: soft-irqs-on + irq-safe-A/21:failed|failed|failed|failed| ok | ok | sirq-safe-A => hirqs-on/12: sirq-safe-A => hirqs-on/12:failed|failed|failed|failed| ok | ok | sirq-safe-A => hirqs-on/21: sirq-safe-A => hirqs-on/21:failed|failed|failed|failed| ok | ok | hard-safe-A + irqs-on/12: hard-safe-A + irqs-on/12:failed|failed|failed|failed| ok | ok | soft-safe-A + irqs-on/12: soft-safe-A + irqs-on/12:failed|failed|failed|failed| ok | ok | hard-safe-A + irqs-on/21: hard-safe-A + irqs-on/21:failed|failed|failed|failed| ok | ok | soft-safe-A + irqs-on/21: soft-safe-A + irqs-on/21:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #1/123: hard-safe-A + unsafe-B #1/123:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #1/123: soft-safe-A + unsafe-B #1/123:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #1/132: hard-safe-A + unsafe-B #1/132:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #1/132: soft-safe-A + unsafe-B #1/132:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #1/213: hard-safe-A + unsafe-B #1/213:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #1/213: soft-safe-A + unsafe-B #1/213:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #1/231: hard-safe-A + unsafe-B #1/231:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #1/231: soft-safe-A + unsafe-B #1/231:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #1/312: hard-safe-A + unsafe-B #1/312:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #1/312: soft-safe-A + unsafe-B #1/312:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #1/321: hard-safe-A + unsafe-B #1/321:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #1/321: soft-safe-A + unsafe-B #1/321:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #2/123: hard-safe-A + unsafe-B #2/123:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #2/123: soft-safe-A + unsafe-B #2/123:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #2/132: hard-safe-A + unsafe-B #2/132:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #2/132: soft-safe-A + unsafe-B #2/132:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #2/213: hard-safe-A + unsafe-B #2/213:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #2/213: soft-safe-A + unsafe-B #2/213:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #2/231: hard-safe-A + unsafe-B #2/231:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #2/231: soft-safe-A + unsafe-B #2/231:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #2/312: hard-safe-A + unsafe-B #2/312:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #2/312: soft-safe-A + unsafe-B #2/312:failed|failed|failed|failed| ok | ok | hard-safe-A + unsafe-B #2/321: hard-safe-A + unsafe-B #2/321:failed|failed|failed|failed| ok | ok | soft-safe-A + unsafe-B #2/321: soft-safe-A + unsafe-B #2/321:failed|failed|failed|failed| ok | ok | hard-irq lock-inversion/123: hard-irq lock-inversion/123:failed|failed|failed|failed| ok | ok | soft-irq lock-inversion/123: soft-irq lock-inversion/123:failed|failed|failed|failed| ok | ok | hard-irq lock-inversion/132: hard-irq lock-inversion/132:failed|failed|failed|failed| ok | ok | soft-irq lock-inversion/132: soft-irq lock-inversion/132:failed|failed|failed|failed| ok | ok | hard-irq lock-inversion/213: hard-irq lock-inversion/213:failed|failed|failed|failed| ok | ok | soft-irq lock-inversion/213: soft-irq lock-inversion/213:failed|failed|failed|failed| ok | ok | hard-irq lock-inversion/231: hard-irq lock-inversion/231:failed|failed|failed|failed| ok | ok | soft-irq lock-inversion/231: soft-irq lock-inversion/231:failed|failed|failed|failed| ok | ok | hard-irq lock-inversion/312: hard-irq lock-inversion/312:failed|failed|failed|failed| ok | ok | soft-irq lock-inversion/312: soft-irq lock-inversion/312:failed|failed|failed|failed| ok | ok | hard-irq lock-inversion/321: hard-irq lock-inversion/321:failed|failed|failed|failed| ok | ok | soft-irq lock-inversion/321: soft-irq lock-inversion/321:failed|failed|failed|failed| ok | ok | hard-irq read-recursion/123: hard-irq read-recursion/123: ok | ok | soft-irq read-recursion/123: soft-irq read-recursion/123: ok | ok | hard-irq read-recursion/132: hard-irq read-recursion/132: ok | ok | soft-irq read-recursion/132: soft-irq read-recursion/132: ok | ok | hard-irq read-recursion/213: hard-irq read-recursion/213: ok | ok | soft-irq read-recursion/213: soft-irq read-recursion/213: ok | ok | hard-irq read-recursion/231: hard-irq read-recursion/231: ok | ok | soft-irq read-recursion/231: soft-irq read-recursion/231: ok | ok | hard-irq read-recursion/312: hard-irq read-recursion/312: ok | ok | soft-irq read-recursion/312: soft-irq read-recursion/312: ok | ok | hard-irq read-recursion/321: hard-irq read-recursion/321: ok | ok | soft-irq read-recursion/321: soft-irq read-recursion/321: ok | ok | -------------------------------------------------------------------------- | Wound/wait tests | --------------------- ww api failures: ww api failures: ok | ok | ok | ok | ok | ok | ww contexts mixing: ww contexts mixing:failed|failed| ok | ok | finishing ww context: finishing ww context: ok | ok | ok | ok | ok | ok | ok | ok | locking mismatches: locking mismatches: ok | ok | ok | ok | ok | ok | EDEADLK handling: EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | spinlock nest unlocked: spinlock nest unlocked: ok | ok | ----------------------------------------------------- |block | try |context| ----------------------------------------------------- context: context:failed|failed| ok | ok | ok | ok | try: try:failed|failed| ok | ok |failed|failed| block: block:failed|failed| ok | ok |failed|failed| spinlock: spinlock:failed|failed| ok | ok |failed|failed| -------------------------------------------------------- 141 out of 253 testcases failed, as expected. | ---------------------------------------------------- tsc: Fast TSC calibration using PIT tsc: Detected 2010.210 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.42 BogoMIPS (lpj=2010210) 4020.42 BogoMIPS (lpj=2010210) pid_max: default: 32768 minimum: 301 Security Framework initialized TOMOYO Linux initialized AppArmor: AppArmor disabled by boot time parameter Mount-cache hash table entries: 512 mce: CPU supports 5 MCE banks mce: unknown CPU type - not enabling MCE support Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 tlb_flushall_shift: -1 Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 tlb_flushall_shift: -1 CPU: CPU: AuthenticAMD AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (fam: 0f, model: 23 (fam: 0f, model: 23, stepping: 02) , stepping: 02) calling set_real_mode_permissions+0x0/0x7c @ 1 initcall set_real_mode_permissions+0x0/0x7c returned 0 after 0 usecs calling trace_init_flags_sys_exit+0x0/0x11 @ 1 initcall trace_init_flags_sys_exit+0x0/0x11 returned 0 after 0 usecs calling trace_init_flags_sys_enter+0x0/0x11 @ 1 initcall trace_init_flags_sys_enter+0x0/0x11 returned 0 after 0 usecs calling init_hw_perf_events+0x0/0x4bb @ 1 Performance Events: Performance Events: no PMU driver, software events only. no PMU driver, software events only. initcall init_hw_perf_events+0x0/0x4bb returned 0 after 1953 usecs calling register_trigger_all_cpu_backtrace+0x0/0x13 @ 1 initcall register_trigger_all_cpu_backtrace+0x0/0x13 returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x17 @ 1 initcall spawn_ksoftirqd+0x0/0x17 returned 0 after 0 usecs calling init_workqueues+0x0/0x2cf @ 1 initcall init_workqueues+0x0/0x2cf returned 0 after 0 usecs calling relay_init+0x0/0x7 @ 1 initcall relay_init+0x0/0x7 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x18c @ 1 initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 976 usecs calling init_events+0x0/0x5d @ 1 initcall init_events+0x0/0x5d returned 0 after 0 usecs calling init_trace_printk+0x0/0x7 @ 1 initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs calling event_trace_memsetup+0x0/0x5a @ 1 initcall event_trace_memsetup+0x0/0x5a returned 0 after 0 usecs calling init_ftrace_syscalls+0x0/0x5e @ 1 initcall init_ftrace_syscalls+0x0/0x5e returned 0 after 976 usecs calling dynamic_debug_init+0x0/0x22c @ 1 initcall dynamic_debug_init+0x0/0x22c returned 0 after 2929 usecs enabled ExtINT on CPU#0 No ESR for 82489DX. Using local APIC timer interrupts. calibrating APIC timer ... Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/time/clockevents.c:49 clockevent_delta2ns+0x53/0xb7() CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 b2879283 b2879283 b010dedc b010dedc b235a604 b235a604 b010df0c b010df0c b1028784 b1028784 b286ec98 b286ec98 00000000 00000000 00000001 00000001 b2879283 b2879283 00000031 00000031 b10613a9 b10613a9 b10613a9 b10613a9 00000031 00000031 00000000 00000000 b2b5a120 b2b5a120 b010df1c b010df1c b102882f b102882f 00000009 00000009 00000000 00000000 b010df34 b010df34 b10613a9 b10613a9 00000000 00000000 00000000 00000000 7fffffff 7fffffff Call Trace: [] dump_stack+0x16/0x18 [] warn_slowpath_common+0x73/0x89 [] ? clockevent_delta2ns+0x53/0xb7 [] warn_slowpath_null+0x1d/0x1f [] clockevent_delta2ns+0x53/0xb7 [] setup_boot_APIC_clock+0x1e4/0x3d1 [] APIC_init_uniprocessor+0xef/0xfb [] kernel_init_freeable+0x5a/0x178 [] ? finish_task_switch.constprop.64+0x28/0x9d [] kernel_init+0xb/0xc3 [] ret_from_kernel_thread+0x1b/0x28 [] ? rest_init+0xb7/0xb7 ---[ end trace a7919e7f17c0a727 ]--- ..... delta 0 ..... mult: 1 ..... calibration result: 0 ..... CPU clock speed is 2009.0995 MHz. ..... host bus clock speed is 0.0000 MHz. APIC frequency too slow, disabling apic timer devtmpfs: initialized calling init_mmap_min_addr+0x0/0x11 @ 1 initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs calling net_ns_init+0x0/0x142 @ 1 initcall net_ns_init+0x0/0x142 returned 0 after 0 usecs calling reboot_init+0x0/0x7 @ 1 initcall reboot_init+0x0/0x7 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x1e @ 1 initcall init_lapic_sysfs+0x0/0x1e returned 0 after 0 usecs calling wq_sysfs_init+0x0/0x11 @ 1 initcall wq_sysfs_init+0x0/0x11 returned 0 after 0 usecs calling ksysfs_init+0x0/0x7a @ 1 initcall ksysfs_init+0x0/0x7a returned 0 after 0 usecs calling pm_init+0x0/0x7a @ 1 initcall pm_init+0x0/0x7a returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0xf @ 1 initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs calling init_wakeup_tracer+0x0/0x1d @ 1 initcall init_wakeup_tracer+0x0/0x1d returned 0 after 0 usecs calling event_trace_enable+0x0/0xf1 @ 1 initcall event_trace_enable+0x0/0xf1 returned 0 after 2929 usecs calling init_zero_pfn+0x0/0x25 @ 1 initcall init_zero_pfn+0x0/0x25 returned 0 after 0 usecs calling memory_failure_init+0x0/0x91 @ 1 initcall memory_failure_init+0x0/0x91 returned 0 after 0 usecs calling fsnotify_init+0x0/0x2c @ 1 initcall fsnotify_init+0x0/0x2c returned 0 after 0 usecs calling filelock_init+0x0/0x48 @ 1 initcall filelock_init+0x0/0x48 returned 0 after 0 usecs calling init_aout_binfmt+0x0/0x13 @ 1 initcall init_aout_binfmt+0x0/0x13 returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x28 @ 1 initcall init_misc_binfmt+0x0/0x28 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x13 @ 1 initcall init_elf_binfmt+0x0/0x13 returned 0 after 0 usecs calling debugfs_init+0x0/0x4c @ 1 initcall debugfs_init+0x0/0x4c returned 0 after 0 usecs calling securityfs_init+0x0/0x43 @ 1 initcall securityfs_init+0x0/0x43 returned 0 after 0 usecs calling calibrate_xor_blocks+0x0/0x189 @ 1 xor: measuring software checksum speed pIII_sse : 3716.000 MB/sec prefetch64-sse: 4840.000 MB/sec xor: using function: prefetch64-sse (4840.000 MB/sec) initcall calibrate_xor_blocks+0x0/0x189 returned 0 after 23437 usecs calling prandom_init+0x0/0x85 @ 1 initcall prandom_init+0x0/0x85 returned 0 after 0 usecs calling test_atomic64+0x0/0x629 @ 1 atomic64 test passed for i386+ platform with CX8 and with SSE initcall test_atomic64+0x0/0x629 returned 0 after 976 usecs calling sfi_sysfs_init+0x0/0xc3 @ 1 initcall sfi_sysfs_init+0x0/0xc3 returned 0 after 0 usecs calling virtio_init+0x0/0x22 @ 1 initcall virtio_init+0x0/0x22 returned 0 after 0 usecs calling regulator_init+0x0/0x69 @ 1 regulator-dummy: no parameters initcall regulator_init+0x0/0x69 returned 0 after 976 usecs calling early_resume_init+0x0/0x1c3 @ 1 RTC time: 20:27:31, date: 10/05/13 initcall early_resume_init+0x0/0x1c3 returned 0 after 976 usecs calling bsp_pm_check_init+0x0/0x11 @ 1 initcall bsp_pm_check_init+0x0/0x11 returned 0 after 0 usecs calling sock_init+0x0/0x89 @ 1 initcall sock_init+0x0/0x89 returned 0 after 0 usecs calling netpoll_init+0x0/0x39 @ 1 initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x197 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x197 returned 0 after 976 usecs calling olpc_init+0x0/0xfc @ 1 initcall olpc_init+0x0/0xfc returned 0 after 0 usecs calling bdi_class_init+0x0/0x3c @ 1 initcall bdi_class_init+0x0/0x3c returned 0 after 0 usecs calling kobject_uevent_init+0x0/0xf @ 1 initcall kobject_uevent_init+0x0/0xf returned 0 after 976 usecs calling gpiolib_sysfs_init+0x0/0x78 @ 1 initcall gpiolib_sysfs_init+0x0/0x78 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x14 @ 1 initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs calling pci_driver_init+0x0/0xf @ 1 initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs calling backlight_class_init+0x0/0x4c @ 1 initcall backlight_class_init+0x0/0x4c returned 0 after 0 usecs calling video_output_class_init+0x0/0x14 @ 1 initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs calling anatop_regulator_init+0x0/0x11 @ 1 initcall anatop_regulator_init+0x0/0x11 returned 0 after 0 usecs calling tty_class_init+0x0/0x2b @ 1 initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc9 @ 1 initcall vtconsole_class_init+0x0/0xc9 returned 0 after 976 usecs calling wakeup_sources_debugfs_init+0x0/0x2f @ 1 initcall wakeup_sources_debugfs_init+0x0/0x2f returned 0 after 0 usecs calling regmap_initcall+0x0/0xc @ 1 initcall regmap_initcall+0x0/0xc returned 0 after 0 usecs calling syscon_init+0x0/0x11 @ 1 initcall syscon_init+0x0/0x11 returned 0 after 0 usecs calling hsi_init+0x0/0xf @ 1 initcall hsi_init+0x0/0xf returned 0 after 976 usecs calling i2c_init+0x0/0x35 @ 1 initcall i2c_init+0x0/0x35 returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x2b4 @ 1 initcall arch_kdebugfs_init+0x0/0x2b4 returned 0 after 0 usecs calling init_pit_clocksource+0x0/0x15 @ 1 initcall init_pit_clocksource+0x0/0x15 returned 0 after 0 usecs calling mtrr_if_init+0x0/0x56 @ 1 initcall mtrr_if_init+0x0/0x56 returned 0 after 0 usecs calling kdump_buf_page_init+0x0/0x38 @ 1 initcall kdump_buf_page_init+0x0/0x38 returned 0 after 0 usecs calling olpc_ec_init_module+0x0/0x11 @ 1 initcall olpc_ec_init_module+0x0/0x11 returned 0 after 0 usecs calling pci_arch_init+0x0/0x55 @ 1 PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x55 returned 0 after 1953 usecs calling topology_init+0x0/0x13 @ 1 Missing cpus node, bailing out initcall topology_init+0x0/0x13 returned 0 after 976 usecs calling mtrr_init_finialize+0x0/0x30 @ 1 initcall mtrr_init_finialize+0x0/0x30 returned 0 after 0 usecs calling param_sysfs_init+0x0/0x2be @ 1 initcall param_sysfs_init+0x0/0x2be returned 0 after 37109 usecs calling pm_sysrq_init+0x0/0x16 @ 1 initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs calling default_bdi_init+0x0/0x78 @ 1 initcall default_bdi_init+0x0/0x78 returned 0 after 0 usecs calling init_bio+0x0/0xee @ 1 bio: create slab at 0 initcall init_bio+0x0/0xee returned 0 after 976 usecs calling fsnotify_notification_init+0x0/0x9c @ 1 initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs calling cryptomgr_init+0x0/0xf @ 1 initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs calling cryptd_init+0x0/0x80 @ 1 initcall cryptd_init+0x0/0x80 returned 0 after 0 usecs calling blk_settings_init+0x0/0x1d @ 1 initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2f @ 1 initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs calling blk_softirq_init+0x0/0x2a @ 1 initcall blk_softirq_init+0x0/0x2a returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x2a @ 1 initcall blk_iopoll_setup+0x0/0x2a returned 0 after 0 usecs calling genhd_device_init+0x0/0x6a @ 1 initcall genhd_device_init+0x0/0x6a returned 0 after 0 usecs calling blk_dev_integrity_init+0x0/0x2f @ 1 initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 usecs calling raid6_select_algo+0x0/0x1e9 @ 1 raid6: mmxx1 1648 MB/s raid6: mmxx2 2992 MB/s raid6: sse1x1 464 MB/s raid6: sse1x2 757 MB/s raid6: sse2x1 777 MB/s raid6: sse2x2 1312 MB/s raid6: int32x1 347 MB/s raid6: int32x2 546 MB/s raid6: int32x4 718 MB/s raid6: int32x8 714 MB/s raid6: using algorithm mmxx2 (2992 MB/s) raid6: using intx1 recovery algorithm initcall raid6_select_algo+0x0/0x1e9 returned 0 after 177734 usecs calling gpiolib_debugfs_init+0x0/0x2a @ 1 initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs calling max7300_init+0x0/0x11 @ 1 initcall max7300_init+0x0/0x11 returned 0 after 0 usecs calling max732x_init+0x0/0x11 @ 1 initcall max732x_init+0x0/0x11 returned 0 after 0 usecs calling mcp23s08_init+0x0/0x11 @ 1 initcall mcp23s08_init+0x0/0x11 returned 0 after 0 usecs calling pca953x_init+0x0/0x11 @ 1 initcall pca953x_init+0x0/0x11 returned 0 after 0 usecs calling pcf857x_init+0x0/0x11 @ 1 initcall pcf857x_init+0x0/0x11 returned 0 after 0 usecs calling sx150x_init+0x0/0x11 @ 1 initcall sx150x_init+0x0/0x11 returned 0 after 0 usecs calling tc3589x_gpio_init+0x0/0x11 @ 1 initcall tc3589x_gpio_init+0x0/0x11 returned 0 after 0 usecs calling gpio_twl4030_init+0x0/0x11 @ 1 initcall gpio_twl4030_init+0x0/0x11 returned 0 after 0 usecs calling wm8350_gpio_init+0x0/0x11 @ 1 initcall wm8350_gpio_init+0x0/0x11 returned 0 after 0 usecs calling pwm_debugfs_init+0x0/0x2a @ 1 initcall pwm_debugfs_init+0x0/0x2a returned 0 after 0 usecs calling pwm_sysfs_init+0x0/0x14 @ 1 initcall pwm_sysfs_init+0x0/0x14 returned 0 after 0 usecs calling pci_slot_init+0x0/0x3d @ 1 initcall pci_slot_init+0x0/0x3d returned 0 after 0 usecs calling fbmem_init+0x0/0x96 @ 1 initcall fbmem_init+0x0/0x96 returned 0 after 0 usecs calling pnp_init+0x0/0xf @ 1 initcall pnp_init+0x0/0xf returned 0 after 0 usecs calling regulator_fixed_voltage_init+0x0/0x11 @ 1 initcall regulator_fixed_voltage_init+0x0/0x11 returned 0 after 0 usecs calling pm8607_regulator_init+0x0/0x11 @ 1 initcall pm8607_regulator_init+0x0/0x11 returned 0 after 0 usecs calling ad5398_init+0x0/0x11 @ 1 initcall ad5398_init+0x0/0x11 returned 0 after 0 usecs calling as3711_regulator_init+0x0/0x11 @ 1 initcall as3711_regulator_init+0x0/0x11 returned 0 after 0 usecs calling da903x_regulator_init+0x0/0x11 @ 1 initcall da903x_regulator_init+0x0/0x11 returned 0 after 0 usecs calling gpio_regulator_init+0x0/0x11 @ 1 initcall gpio_regulator_init+0x0/0x11 returned 0 after 0 usecs calling isl6271a_init+0x0/0x11 @ 1 initcall isl6271a_init+0x0/0x11 returned 0 after 0 usecs calling lp3972_module_init+0x0/0x11 @ 1 initcall lp3972_module_init+0x0/0x11 returned 0 after 0 usecs calling lp8755_init+0x0/0x11 @ 1 initcall lp8755_init+0x0/0x11 returned 0 after 0 usecs calling max1586_pmic_init+0x0/0x11 @ 1 initcall max1586_pmic_init+0x0/0x11 returned 0 after 0 usecs calling max8649_init+0x0/0x11 @ 1 initcall max8649_init+0x0/0x11 returned 0 after 0 usecs calling max8660_init+0x0/0x11 @ 1 initcall max8660_init+0x0/0x11 returned 0 after 0 usecs calling max8998_pmic_init+0x0/0x11 @ 1 initcall max8998_pmic_init+0x0/0x11 returned 0 after 0 usecs calling tps51632_init+0x0/0x11 @ 1 initcall tps51632_init+0x0/0x11 returned 0 after 0 usecs calling pcf50633_regulator_init+0x0/0x11 @ 1 initcall pcf50633_regulator_init+0x0/0x11 returned 0 after 0 usecs calling tps6105x_regulator_init+0x0/0x11 @ 1 initcall tps6105x_regulator_init+0x0/0x11 returned 0 after 0 usecs calling tps62360_init+0x0/0x11 @ 1 initcall tps62360_init+0x0/0x11 returned 0 after 0 usecs calling tps_65023_init+0x0/0x11 @ 1 initcall tps_65023_init+0x0/0x11 returned 0 after 0 usecs calling tps65090_regulator_init+0x0/0x11 @ 1 initcall tps65090_regulator_init+0x0/0x11 returned 0 after 0 usecs calling tps65217_regulator_init+0x0/0x11 @ 1 initcall tps65217_regulator_init+0x0/0x11 returned 0 after 0 usecs calling tps65910_init+0x0/0x11 @ 1 initcall tps65910_init+0x0/0x11 returned 0 after 0 usecs calling twlreg_init+0x0/0x11 @ 1 initcall twlreg_init+0x0/0x11 returned 0 after 0 usecs calling wm831x_dcdc_init+0x0/0x8a @ 1 initcall wm831x_dcdc_init+0x0/0x8a returned 0 after 0 usecs calling wm831x_isink_init+0x0/0x30 @ 1 initcall wm831x_isink_init+0x0/0x30 returned 0 after 0 usecs calling wm831x_ldo_init+0x0/0x6a @ 1 initcall wm831x_ldo_init+0x0/0x6a returned 0 after 0 usecs calling wm8350_regulator_init+0x0/0x11 @ 1 initcall wm8350_regulator_init+0x0/0x11 returned 0 after 0 usecs calling misc_init+0x0/0xad @ 1 initcall misc_init+0x0/0xad returned 0 after 0 usecs calling tifm_init+0x0/0x8c @ 1 initcall tifm_init+0x0/0x8c returned 0 after 0 usecs calling pm860x_i2c_init+0x0/0x30 @ 1 initcall pm860x_i2c_init+0x0/0x30 returned 0 after 0 usecs calling pm800_i2c_init+0x0/0x11 @ 1 initcall pm800_i2c_init+0x0/0x11 returned 0 after 0 usecs calling tc3589x_init+0x0/0x11 @ 1 initcall tc3589x_init+0x0/0x11 returned 0 after 0 usecs calling wm8400_module_init+0x0/0x30 @ 1 initcall wm8400_module_init+0x0/0x30 returned 0 after 0 usecs calling wm831x_i2c_init+0x0/0x30 @ 1 initcall wm831x_i2c_init+0x0/0x30 returned 0 after 0 usecs calling wm8350_i2c_init+0x0/0x11 @ 1 initcall wm8350_i2c_init+0x0/0x11 returned 0 after 0 usecs calling tps6105x_init+0x0/0x11 @ 1 initcall tps6105x_init+0x0/0x11 returned 0 after 0 usecs calling tps6507x_i2c_init+0x0/0x11 @ 1 initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 0 usecs calling tps65217_init+0x0/0x11 @ 1 initcall tps65217_init+0x0/0x11 returned 0 after 0 usecs calling tps65910_i2c_init+0x0/0x11 @ 1 initcall tps65910_i2c_init+0x0/0x11 returned 0 after 0 usecs calling da903x_init+0x0/0x11 @ 1 initcall da903x_init+0x0/0x11 returned 0 after 0 usecs calling lp8788_init+0x0/0x11 @ 1 initcall lp8788_init+0x0/0x11 returned 0 after 0 usecs calling max77693_i2c_init+0x0/0x11 @ 1 initcall max77693_i2c_init+0x0/0x11 returned 0 after 0 usecs calling max8998_i2c_init+0x0/0x11 @ 1 initcall max8998_i2c_init+0x0/0x11 returned 0 after 0 usecs calling pcf50633_init+0x0/0x11 @ 1 initcall pcf50633_init+0x0/0x11 returned 0 after 0 usecs calling tps65090_init+0x0/0x11 @ 1 initcall tps65090_init+0x0/0x11 returned 0 after 0 usecs calling lm3533_i2c_init+0x0/0x11 @ 1 initcall lm3533_i2c_init+0x0/0x11 returned 0 after 0 usecs calling as3711_i2c_init+0x0/0x11 @ 1 initcall as3711_i2c_init+0x0/0x11 returned 0 after 0 usecs calling init_scsi+0x0/0x80 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x80 returned 0 after 976 usecs calling ata_init+0x0/0x2a1 @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x2a1 returned 0 after 976 usecs calling phy_init+0x0/0x28 @ 1 initcall phy_init+0x0/0x28 returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x32 @ 1 initcall init_pcmcia_cs+0x0/0x32 returned 0 after 0 usecs calling usb_init+0x0/0x146 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x146 returned 0 after 3906 usecs calling usb_phy_gen_xceiv_init+0x0/0x11 @ 1 initcall usb_phy_gen_xceiv_init+0x0/0x11 returned 0 after 0 usecs calling usb_udc_init+0x0/0x45 @ 1 initcall usb_udc_init+0x0/0x45 returned 0 after 0 usecs calling serio_init+0x0/0x2e @ 1 initcall serio_init+0x0/0x2e returned 0 after 0 usecs calling gameport_init+0x0/0x2e @ 1 initcall gameport_init+0x0/0x2e returned 0 after 0 usecs calling input_init+0x0/0xf9 @ 1 initcall input_init+0x0/0xf9 returned 0 after 0 usecs calling tca6416_keypad_init+0x0/0x11 @ 1 initcall tca6416_keypad_init+0x0/0x11 returned 0 after 0 usecs calling tca8418_keypad_init+0x0/0x11 @ 1 initcall tca8418_keypad_init+0x0/0x11 returned 0 after 0 usecs calling rtc_init+0x0/0x44 @ 1 initcall rtc_init+0x0/0x44 returned 0 after 0 usecs calling i2c_gpio_init+0x0/0x30 @ 1 initcall i2c_gpio_init+0x0/0x30 returned 0 after 0 usecs calling videodev_init+0x0/0x7f @ 1 Linux video capture interface: v2.00 initcall videodev_init+0x0/0x7f returned 0 after 976 usecs calling init_dvbdev+0x0/0xc2 @ 1 initcall init_dvbdev+0x0/0xc2 returned 0 after 0 usecs calling pps_init+0x0/0xa6 @ 1 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti initcall pps_init+0x0/0xa6 returned 0 after 1953 usecs calling ptp_init+0x0/0x8c @ 1 PTP clock support registered initcall ptp_init+0x0/0x8c returned 0 after 976 usecs calling power_supply_class_init+0x0/0x35 @ 1 initcall power_supply_class_init+0x0/0x35 returned 0 after 0 usecs calling hwmon_init+0x0/0xea @ 1 initcall hwmon_init+0x0/0xea returned 0 after 976 usecs calling mmc_init+0x0/0x80 @ 1 initcall mmc_init+0x0/0x80 returned 0 after 0 usecs calling leds_init+0x0/0x32 @ 1 initcall leds_init+0x0/0x32 returned 0 after 0 usecs calling iio_init+0x0/0x85 @ 1 initcall iio_init+0x0/0x85 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x44 @ 1 PCI: Probing PCI hardware PCI: root bus 00: using default resources PCI: Probing PCI hardware (bus 00) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 pci 0000:00:01.0: [10de:0050] type 00 class 0x060100 pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f] pci 0000:00:01.1: reg 0x20: [io 0x4c00-0x4c3f] pci 0000:00:01.1: reg 0x24: [io 0x4c40-0x4c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 pci 0000:00:02.0: reg 0x10: [mem 0xda004000-0xda004fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfeb000ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: [10de:0059] type 00 class 0x040100 pci 0000:00:04.0: reg 0x10: [io 0xdc00-0xdcff] pci 0000:00:04.0: reg 0x14: [io 0xe000-0xe0ff] pci 0000:00:04.0: reg 0x18: [mem 0xda003000-0xda003fff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 pci 0000:00:07.0: reg 0x10: [io 0x09f0-0x09f7] pci 0000:00:07.0: reg 0x14: [io 0x0bf0-0x0bf3] pci 0000:00:07.0: reg 0x18: [io 0x0970-0x0977] pci 0000:00:07.0: reg 0x1c: [io 0x0b70-0x0b73] pci 0000:00:07.0: reg 0x20: [io 0xd800-0xd80f] pci 0000:00:07.0: reg 0x24: [mem 0xda002000-0xda002fff] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 pci 0000:00:08.0: reg 0x10: [io 0x09e0-0x09e7] pci 0000:00:08.0: reg 0x14: [io 0x0be0-0x0be3] pci 0000:00:08.0: reg 0x18: [io 0x0960-0x0967] pci 0000:00:08.0: reg 0x1c: [io 0x0b60-0x0b63] pci 0000:00:08.0: reg 0x20: [io 0xc400-0xc40f] pci 0000:00:08.0: reg 0x24: [mem 0xda001000-0xda001fff] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401 pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000 pci 0000:00:0a.0: reg 0x10: [mem 0xda000000-0xda000fff] pci 0000:00:0a.0: reg 0x14: [io 0xb000-0xb007] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:00:09.0: PCI bridge to [bus 05] (subtractive decode) pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci 0000:00:0b.0: PCI bridge to [bus 04] pci 0000:00:0c.0: PCI bridge to [bus 03] pci 0000:00:0d.0: PCI bridge to [bus 02] pci 0000:01:00.0: [1002:5b60] type 00 class 0x030000 pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref] pci 0000:01:00.0: reg 0x14: [io 0xa000-0xa0ff] pci 0000:01:00.0: reg 0x18: [mem 0xd9000000-0xd900ffff] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:5b70] type 00 class 0x038000 pci 0000:01:00.1: reg 0x10: [mem 0xd9010000-0xd901ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:0e.0: PCI bridge to [bus 01] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 05 pci 0000:00:00.0: default IRQ router [10de:005e] PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff] initcall pci_subsys_init+0x0/0x44 returned 0 after 85937 usecs calling proto_init+0x0/0xf @ 1 initcall proto_init+0x0/0xf returned 0 after 0 usecs calling net_dev_init+0x0/0x197 @ 1 initcall net_dev_init+0x0/0x197 returned 0 after 0 usecs calling neigh_init+0x0/0xa4 @ 1 initcall neigh_init+0x0/0xa4 returned 0 after 0 usecs calling fib_rules_init+0x0/0xbd @ 1 initcall fib_rules_init+0x0/0xbd returned 0 after 0 usecs calling genl_init+0x0/0x76 @ 1 initcall genl_init+0x0/0x76 returned 0 after 0 usecs calling cipso_v4_init+0x0/0x76 @ 1 initcall cipso_v4_init+0x0/0x76 returned 0 after 0 usecs calling irda_init+0x0/0x88 @ 1 NET: Registered protocol family 23 initcall irda_init+0x0/0x88 returned 0 after 976 usecs calling bt_init+0x0/0x89 @ 1 Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized initcall bt_init+0x0/0x89 returned 0 after 5859 usecs calling atm_init+0x0/0xd0 @ 1 NET: Registered protocol family 8 NET: Registered protocol family 20 initcall atm_init+0x0/0xd0 returned 0 after 1953 usecs calling cfg80211_init+0x0/0xd7 @ 1 cfg80211: Calling CRDA to update world regulatory domain initcall cfg80211_init+0x0/0xd7 returned 0 after 1953 usecs calling wireless_nlevent_init+0x0/0xf @ 1 initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs calling ieee80211_init+0x0/0xa @ 1 initcall ieee80211_init+0x0/0xa returned 0 after 0 usecs calling netlbl_init+0x0/0x7d @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x7d returned 0 after 3906 usecs calling wpan_phy_class_init+0x0/0x33 @ 1 initcall wpan_phy_class_init+0x0/0x33 returned 0 after 0 usecs calling nfc_init+0x0/0x8f @ 1 nfc: nfc_init: NFC Core ver 0.1 NET: Registered protocol family 39 initcall nfc_init+0x0/0x8f returned 0 after 1953 usecs calling nfc_hci_init+0x0/0xa @ 1 initcall nfc_hci_init+0x0/0xa returned 0 after 0 usecs calling nmi_warning_debugfs+0x0/0x24 @ 1 initcall nmi_warning_debugfs+0x0/0x24 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x3b @ 1 Switched to clocksource pit initcall clocksource_done_booting+0x0/0x3b returned 0 after 1025 usecs calling tracer_init_debugfs+0x0/0x158 @ 1 initcall tracer_init_debugfs+0x0/0x158 returned 0 after 608 usecs calling init_trace_printk_function_export+0x0/0x33 @ 1 initcall init_trace_printk_function_export+0x0/0x33 returned 0 after 14 usecs calling event_trace_init+0x0/0x1bb @ 1 initcall event_trace_init+0x0/0x1bb returned 0 after 98030 usecs calling init_uprobe_trace+0x0/0x59 @ 1 initcall init_uprobe_trace+0x0/0x59 returned 0 after 28 usecs calling init_pipe_fs+0x0/0x3d @ 1 initcall init_pipe_fs+0x0/0x3d returned 0 after 103 usecs calling eventpoll_init+0x0/0x10d @ 1 initcall eventpoll_init+0x0/0x10d returned 0 after 42 usecs calling anon_inode_init+0x0/0x52 @ 1 initcall anon_inode_init+0x0/0x52 returned 0 after 62 usecs calling fscache_init+0x0/0x193 @ 1 FS-Cache: Loaded initcall fscache_init+0x0/0x193 returned 0 after 1112 usecs calling cachefiles_init+0x0/0x99 @ 1 CacheFiles: Loaded initcall cachefiles_init+0x0/0x99 returned 0 after 1510 usecs calling tomoyo_initerface_init+0x0/0x17c @ 1 initcall tomoyo_initerface_init+0x0/0x17c returned 0 after 200 usecs calling aa_create_aafs+0x0/0xa7 @ 1 initcall aa_create_aafs+0x0/0xa7 returned 0 after 4 usecs calling blk_scsi_ioctl_init+0x0/0x288 @ 1 initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 4 usecs calling dynamic_debug_init_debugfs+0x0/0x6a @ 1 initcall dynamic_debug_init_debugfs+0x0/0x6a returned 0 after 26 usecs calling pnp_system_init+0x0/0xf @ 1 initcall pnp_system_init+0x0/0xf returned 0 after 39 usecs calling pnpbios_init+0x0/0x337 @ 1 PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xb00fc550 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc580, dseg 0xf0000 pnp 00:00: [irq 2] pnp 00:00: [io 0x0020-0x0021] pnp 00:00: [io 0x00a0-0x00a1] pnp 00:00: Plug and Play BIOS device, IDs PNP0000 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f-0x0091] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active) pnp 00:02: [irq 0] pnp 00:02: [io 0x0040-0x0043] pnp 00:02: Plug and Play BIOS device, IDs PNP0100 (active) pnp 00:03: [irq 8] pnp 00:03: [io 0x0070-0x0071] pnp 00:03: Plug and Play BIOS device, IDs PNP0b00 (active) pnp 00:04: [irq 1] pnp 00:04: [io 0x0060] pnp 00:04: [io 0x0064] pnp 00:04: Plug and Play BIOS device, IDs PNP0303 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play BIOS device, IDs PNP0800 (active) pnp 00:06: [irq 13] pnp 00:06: [io 0x00f0-0x00ff] pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active) pnp 00:07: [mem 0x00000000-0x0009ffff] pnp 00:07: [mem 0xfffe0000-0xffffffff] pnp 00:07: [mem 0xfec00000-0xfec0ffff] pnp 00:07: [mem 0xfee00000-0xfeefffff] pnp 00:07: [mem 0xfefffc00-0xfeffffff] pnp 00:07: [mem 0x00100000-0x00ffffff] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved system 00:07: [mem 0xfffe0000-0xffffffff] has been reserved system 00:07: [mem 0xfec00000-0xfec0ffff] has been reserved system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved system 00:07: [mem 0xfefffc00-0xfeffffff] has been reserved system 00:07: [mem 0x00100000-0x00ffffff] could not be reserved system 00:07: Plug and Play BIOS device, IDs PNP0c01 (active) pnp 00:08: [mem 0x000f0000-0x000f3fff] pnp 00:08: [mem 0x000f4000-0x000f7fff] pnp 00:08: [mem 0x000f8000-0x000fbfff] pnp 00:08: [mem 0x000fc000-0x000fffff] system 00:08: [mem 0x000f0000-0x000f3fff] could not be reserved system 00:08: [mem 0x000f4000-0x000f7fff] could not be reserved system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved system 00:08: Plug and Play BIOS device, IDs PNP0c02 (active) pnp 00:09: [io 0x0290-0x029f] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x0cf8-0x0cff] pnp 00:09: Plug and Play BIOS device, IDs PNP0a03 (active) pnp 00:0b: [irq 4] pnp 00:0b: [io 0x03f8-0x03ff] pnp 00:0b: Plug and Play BIOS device, IDs PNP0501 (active) pnp 00:0c: [dma 2] pnp 00:0c: [io 0x03f0-0x03f5] pnp 00:0c: [io 0x03f7] pnp 00:0c: [irq 6] pnp 00:0c: Plug and Play BIOS device, IDs PNP0700 (active) pnp 00:0e: [dma 3] pnp 00:0e: [irq 7] pnp 00:0e: [io 0x0378-0x037f] pnp 00:0e: [io 0x0778-0x077f] pnp 00:0e: Plug and Play BIOS device, IDs PNP0401 (active) pnp 00:0f: [irq 10] pnp 00:0f: [io 0x0330-0x0333] pnp 00:0f: Plug and Play BIOS device, IDs PNPb006 (active) pnp 00:10: [io 0x0201] pnp 00:10: Plug and Play BIOS device, IDs PNPb02f (active) PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver initcall pnpbios_init+0x0/0x337 returned 0 after 76635 usecs calling chr_dev_init+0x0/0xc3 @ 1 initcall chr_dev_init+0x0/0xc3 returned 0 after 5687 usecs calling firmware_class_init+0x0/0x109 @ 1 initcall firmware_class_init+0x0/0x109 returned 0 after 29 usecs calling init_pcmcia_bus+0x0/0x5e @ 1 initcall init_pcmcia_bus+0x0/0x5e returned 0 after 55 usecs calling thermal_init+0x0/0xb5 @ 1 initcall thermal_init+0x0/0xb5 returned 0 after 85 usecs calling ssb_modinit+0x0/0x3f @ 1 initcall ssb_modinit+0x0/0x3f returned 0 after 39 usecs calling pcibios_assign_resources+0x0/0x8f @ 1 pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:0b.0: PCI bridge to [bus 04] pci 0000:00:0c.0: PCI bridge to [bus 03] pci 0000:00:0d.0: PCI bridge to [bus 02] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref] pci 0000:00:0e.0: PCI bridge to [bus 01] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] initcall pcibios_assign_resources+0x0/0x8f returned 0 after 16287 usecs calling sysctl_core_init+0x0/0x23 @ 1 initcall sysctl_core_init+0x0/0x23 returned 0 after 36 usecs calling inet_init+0x0/0x26f @ 1 NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) initcall inet_init+0x0/0x26f returned 0 after 8885 usecs calling ipv4_offload_init+0x0/0x4e @ 1 initcall ipv4_offload_init+0x0/0x4e returned 0 after 11 usecs calling af_unix_init+0x0/0x4d @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x4d returned 0 after 1086 usecs calling ipv6_offload_init+0x0/0x6b @ 1 initcall ipv6_offload_init+0x0/0x6b returned 0 after 4 usecs calling init_sunrpc+0x0/0x64 @ 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x64 returned 0 after 4243 usecs calling pci_apply_final_quirks+0x0/0x10f @ 1 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x10f returned 0 after 74263 usecs calling populate_rootfs+0x0/0x93 @ 1 initcall populate_rootfs+0x0/0x93 returned 0 after 307 usecs calling pci_iommu_init+0x0/0x34 @ 1 initcall pci_iommu_init+0x0/0x34 returned 0 after 4 usecs calling i8259A_init_ops+0x0/0x20 @ 1 initcall i8259A_init_ops+0x0/0x20 returned 0 after 4 usecs calling sbf_init+0x0/0xc9 @ 1 initcall sbf_init+0x0/0xc9 returned 0 after 4 usecs calling init_tsc_clocksource+0x0/0xac @ 1 initcall init_tsc_clocksource+0x0/0xac returned 0 after 24 usecs calling add_rtc_cmos+0x0/0x84 @ 1 initcall add_rtc_cmos+0x0/0x84 returned 0 after 5 usecs calling i8237A_init_ops+0x0/0x11 @ 1 initcall i8237A_init_ops+0x0/0x11 returned 0 after 4 usecs calling cache_sysfs_init+0x0/0x1c4 @ 1 initcall cache_sysfs_init+0x0/0x1c4 returned 0 after 4 usecs calling thermal_throttle_init_device+0x0/0xb8 @ 1 initcall thermal_throttle_init_device+0x0/0xb8 returned 0 after 4 usecs calling amd_ibs_init+0x0/0x1ce @ 1 initcall amd_ibs_init+0x0/0x1ce returned -19 after 4 usecs calling cpuid_init+0x0/0xe7 @ 1 initcall cpuid_init+0x0/0xe7 returned 0 after 188 usecs calling ioapic_init_ops+0x0/0x11 @ 1 initcall ioapic_init_ops+0x0/0x11 returned 0 after 4 usecs calling add_pcspkr+0x0/0x3c @ 1 initcall add_pcspkr+0x0/0x3c returned 0 after 67 usecs calling start_periodic_check_for_corruption+0x0/0x54 @ 1 Scanning for low memory corruption every 60 seconds initcall start_periodic_check_for_corruption+0x0/0x54 returned 0 after 1177 usecs calling add_bus_probe+0x0/0x21 @ 1 initcall add_bus_probe+0x0/0x21 returned 0 after 4 usecs calling sysfb_init+0x0/0x80 @ 1 initcall sysfb_init+0x0/0x80 returned 0 after 57 usecs calling start_pageattr_test+0x0/0x4b @ 1 initcall start_pageattr_test+0x0/0x4b returned 0 after 104 usecs calling pt_dump_init+0x0/0x6d @ 1 initcall pt_dump_init+0x0/0x6d returned 0 after 19 usecs calling aes_init+0x0/0xf @ 1 initcall aes_init+0x0/0xf returned 0 after 196 usecs calling init+0x0/0xf @ 1 initcall init+0x0/0xf returned 0 after 178 usecs calling init+0x0/0xf @ 1 initcall init+0x0/0xf returned 0 after 55 usecs calling aesni_init+0x0/0x32 @ 1 initcall aesni_init+0x0/0x32 returned -19 after 4 usecs calling crc32c_intel_mod_init+0x0/0x24 @ 1 initcall crc32c_intel_mod_init+0x0/0x24 returned -19 after 4 usecs calling crc32_pclmul_mod_init+0x0/0x31 @ 1 PCLMULQDQ-NI instructions are not detected. initcall crc32_pclmul_mod_init+0x0/0x31 returned -19 after 798 usecs calling net5501_init+0x0/0x104 @ 1 initcall net5501_init+0x0/0x104 returned 0 after 4 usecs calling goldfish_init+0x0/0x3f @ 1 initcall goldfish_init+0x0/0x3f returned 0 after 65 usecs calling iris_init+0x0/0xb1 @ 1 The force parameter has not been set to 1. The Iris poweroff handler will not be installed. initcall iris_init+0x0/0xb1 returned -19 after 1113 usecs calling olpc_create_platform_devices+0x0/0x1c @ 1 initcall olpc_create_platform_devices+0x0/0x1c returned 0 after 4 usecs calling scx200_init+0x0/0x23 @ 1 NatSemi SCx200 Driver initcall scx200_init+0x0/0x23 returned 0 after 1028 usecs calling proc_execdomains_init+0x0/0x27 @ 1 initcall proc_execdomains_init+0x0/0x27 returned 0 after 14 usecs calling ioresources_init+0x0/0x44 @ 1 initcall ioresources_init+0x0/0x44 returned 0 after 19 usecs calling uid_cache_init+0x0/0x81 @ 1 initcall uid_cache_init+0x0/0x81 returned 0 after 27 usecs calling init_posix_timers+0x0/0x1dd @ 1 initcall init_posix_timers+0x0/0x1dd returned 0 after 16 usecs calling init_posix_cpu_timers+0x0/0x9b @ 1 initcall init_posix_cpu_timers+0x0/0x9b returned 0 after 4 usecs calling init_sched_debug_procfs+0x0/0x30 @ 1 initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 12 usecs calling irq_gc_init_ops+0x0/0x11 @ 1 initcall irq_gc_init_ops+0x0/0x11 returned 0 after 4 usecs calling irq_debugfs_init+0x0/0x30 @ 1 initcall irq_debugfs_init+0x0/0x30 returned 0 after 16 usecs calling irq_pm_init_ops+0x0/0x11 @ 1 initcall irq_pm_init_ops+0x0/0x11 returned 0 after 17 usecs calling timekeeping_init_ops+0x0/0x11 @ 1 initcall timekeeping_init_ops+0x0/0x11 returned 0 after 4 usecs calling init_clocksource_sysfs+0x0/0x58 @ 1 initcall init_clocksource_sysfs+0x0/0x58 returned 0 after 108 usecs calling init_timer_list_procfs+0x0/0x30 @ 1 initcall init_timer_list_procfs+0x0/0x30 returned 0 after 12 usecs calling alarmtimer_init+0x0/0x168 @ 1 initcall alarmtimer_init+0x0/0x168 returned 0 after 109 usecs calling clockevents_init_sysfs+0x0/0x7a @ 1 initcall clockevents_init_sysfs+0x0/0x7a returned 0 after 150 usecs calling lockdep_proc_init+0x0/0x4a @ 1 initcall lockdep_proc_init+0x0/0x4a returned 0 after 19 usecs calling futex_init+0x0/0x61 @ 1 initcall futex_init+0x0/0x61 returned 0 after 17 usecs calling init_rttest+0x0/0x139 @ 1 Initializing RT-Tester: OK initcall init_rttest+0x0/0x139 returned 0 after 1478 usecs calling proc_dma_init+0x0/0x27 @ 1 initcall proc_dma_init+0x0/0x27 returned 0 after 12 usecs calling kallsyms_init+0x0/0x2a @ 1 initcall kallsyms_init+0x0/0x2a returned 0 after 18 usecs calling backtrace_regression_test+0x0/0xdb @ 1 ====[ backtrace testing ]=========== Testing a backtrace from process context. The following trace is a kernel self test and not a bug! CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 b1069b79 b1069b79 b010debc b010debc b235a604 b235a604 b010def8 b010def8 b1069ba8 b1069ba8 b2871e98 b2871e98 00000282 00000282 00d17a94 00d17a94 00000976 00000976 b2c82480 b2c82480 000006aa 000006aa b010def8 b010def8 b105c5f4 b105c5f4 00000001 00000001 00000000 00000000 00000000 00000000 b1069b79 b1069b79 000006aa 000006aa b010df78 b010df78 b2d05af4 b2d05af4 b2cc09a0 b2cc09a0 b2864daa b2864daa b1069b79 b1069b79 00000001 00000001 Call Trace: [] ? backtrace_test_irq_callback+0x14/0x14 [] dump_stack+0x16/0x18 [] backtrace_regression_test+0x2f/0xdb [] ? ktime_get+0x58/0xc6 [] ? backtrace_test_irq_callback+0x14/0x14 [] do_one_initcall+0x72/0x14e [] ? backtrace_test_irq_callback+0x14/0x14 [] ? parse_args+0x243/0x384 [] ? __usermodehelper_set_disable_depth+0x3c/0x42 [] kernel_init_freeable+0xd6/0x178 [] ? loglevel+0x2b/0x2b [] kernel_init+0xb/0xc3 [] ret_from_kernel_thread+0x1b/0x28 [] ? rest_init+0xb7/0xb7 Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 00000006 00000006 b012feb8 b012feb8 b235a604 b235a604 b012fec0 b012fec0 b1069b6d b1069b6d b012fecc b012fecc b102be74 b102be74 00000040 00000040 b012ff0c b012ff0c b102ba58 b102ba58 b012fedc b012fedc 00000046 00000046 b1049660 b1049660 b012ff58 b012ff58 00000286 00000286 b012ff48 b012ff48 04208040 04208040 fffb712d fffb712d 0000000a 0000000a 00000100 00000100 00000001 00000001 b0055a20 b0055a20 b2b5db40 b2b5db40 b01137a0 b01137a0 Call Trace: [] dump_stack+0x16/0x18 [] backtrace_test_irq_callback+0x8/0x14 [] tasklet_action+0x65/0x6a [] __do_softirq+0xa9/0x1e8 [] ? complete+0x42/0x4a [] run_ksoftirqd+0x17/0x3a [] smpboot_thread_fn+0x101/0x117 [] ? lg_global_unlock+0x29/0x29 [] kthread+0x8e/0x9a [] ret_from_kernel_thread+0x1b/0x28 [] ? __kthread_unpark+0x29/0x29 Testing a saved backtrace. The following trace is a kernel self test and not a bug! [] save_stack_trace+0x2a/0x44 [] save_stack_trace+0x2a/0x44 [] backtrace_regression_test+0xbe/0xdb [] backtrace_regression_test+0xbe/0xdb [] do_one_initcall+0x72/0x14e [] do_one_initcall+0x72/0x14e [] kernel_init_freeable+0xd6/0x178 [] kernel_init_freeable+0xd6/0x178 [] kernel_init+0xb/0xc3 [] kernel_init+0xb/0xc3 [] ret_from_kernel_thread+0x1b/0x28 [] ret_from_kernel_thread+0x1b/0x28 [] 0xffffffff [] 0xffffffff ====[ end of backtrace testing ]==== initcall backtrace_regression_test+0x0/0xdb returned 0 after 95106 usecs calling audit_init+0x0/0x14c @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1381004849.342:1): initialized initcall audit_init+0x0/0x14c returned 0 after 2452 usecs calling audit_watch_init+0x0/0x31 @ 1 initcall audit_watch_init+0x0/0x31 returned 0 after 13 usecs calling audit_tree_init+0x0/0x42 @ 1 initcall audit_tree_init+0x0/0x42 returned 0 after 10 usecs calling hung_task_init+0x0/0x56 @ 1 initcall hung_task_init+0x0/0x56 returned 0 after 44 usecs calling utsname_sysctl_init+0x0/0x11 @ 1 initcall utsname_sysctl_init+0x0/0x11 returned 0 after 19 usecs calling init_mmio_trace+0x0/0xf @ 1 initcall init_mmio_trace+0x0/0xf returned 0 after 5 usecs calling init_blk_tracer+0x0/0x54 @ 1 initcall init_blk_tracer+0x0/0x54 returned 0 after 6 usecs calling perf_event_sysfs_init+0x0/0x91 @ 1 initcall perf_event_sysfs_init+0x0/0x91 returned 0 after 184 usecs calling init_uprobes+0x0/0x4f @ 1 initcall init_uprobes+0x0/0x4f returned 0 after 18 usecs calling init_per_zone_wmark_min+0x0/0x9a @ 1 initcall init_per_zone_wmark_min+0x0/0x9a returned 0 after 68 usecs calling kswapd_init+0x0/0x13 @ 1 initcall kswapd_init+0x0/0x13 returned 0 after 46 usecs calling extfrag_debug_init+0x0/0x7d @ 1 initcall extfrag_debug_init+0x0/0x7d returned 0 after 40 usecs calling setup_vmstat+0x0/0x8a @ 1 initcall setup_vmstat+0x0/0x8a returned 0 after 35 usecs calling mm_sysfs_init+0x0/0x22 @ 1 initcall mm_sysfs_init+0x0/0x22 returned 0 after 8 usecs calling slab_proc_init+0x0/0x2a @ 1 initcall slab_proc_init+0x0/0x2a returned 0 after 11 usecs calling init_reserve_notifier+0x0/0x7 @ 1 initcall init_reserve_notifier+0x0/0x7 returned 0 after 4 usecs calling init_admin_reserve+0x0/0x25 @ 1 initcall init_admin_reserve+0x0/0x25 returned 0 after 4 usecs calling init_user_reserve+0x0/0x25 @ 1 initcall init_user_reserve+0x0/0x25 returned 0 after 4 usecs calling proc_vmalloc_init+0x0/0x2a @ 1 initcall proc_vmalloc_init+0x0/0x2a returned 0 after 12 usecs calling ksm_init+0x0/0x15b @ 1 initcall ksm_init+0x0/0x15b returned 0 after 114 usecs calling slab_proc_init+0x0/0x7 @ 1 initcall slab_proc_init+0x0/0x7 returned 0 after 3 usecs calling cpucache_init+0x0/0xcc @ 1 initcall cpucache_init+0x0/0xcc returned 0 after 4 usecs calling hugepage_init+0x0/0x125 @ 1 initcall hugepage_init+0x0/0x125 returned 0 after 146 usecs calling pfn_inject_init+0x0/0x131 @ 1 initcall pfn_inject_init+0x0/0x131 returned 0 after 95 usecs calling fcntl_init+0x0/0x2f @ 1 initcall fcntl_init+0x0/0x2f returned 0 after 15 usecs calling proc_filesystems_init+0x0/0x27 @ 1 initcall proc_filesystems_init+0x0/0x27 returned 0 after 12 usecs calling dio_init+0x0/0x32 @ 1 initcall dio_init+0x0/0x32 returned 0 after 14 usecs calling fsnotify_mark_init+0x0/0x46 @ 1 initcall fsnotify_mark_init+0x0/0x46 returned 0 after 253 usecs calling inotify_user_setup+0x0/0x78 @ 1 initcall inotify_user_setup+0x0/0x78 returned 0 after 25 usecs calling fanotify_user_setup+0x0/0x5a @ 1 initcall fanotify_user_setup+0x0/0x5a returned 0 after 24 usecs calling aio_setup+0x0/0x8a @ 1 initcall aio_setup+0x0/0x8a returned 0 after 30 usecs calling proc_locks_init+0x0/0x27 @ 1 initcall proc_locks_init+0x0/0x27 returned 0 after 12 usecs calling init_mbcache+0x0/0x11 @ 1 initcall init_mbcache+0x0/0x11 returned 0 after 4 usecs calling dquot_init+0x0/0xfb @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) initcall dquot_init+0x0/0xfb returned 0 after 1600 usecs calling init_v1_quota_format+0x0/0xf @ 1 initcall init_v1_quota_format+0x0/0xf returned 0 after 12 usecs calling init_v2_quota_format+0x0/0x1d @ 1 initcall init_v2_quota_format+0x0/0x1d returned 0 after 4 usecs calling proc_cmdline_init+0x0/0x27 @ 1 initcall proc_cmdline_init+0x0/0x27 returned 0 after 12 usecs calling proc_consoles_init+0x0/0x27 @ 1 initcall proc_consoles_init+0x0/0x27 returned 0 after 11 usecs calling proc_cpuinfo_init+0x0/0x27 @ 1 initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 12 usecs calling proc_devices_init+0x0/0x27 @ 1 initcall proc_devices_init+0x0/0x27 returned 0 after 13 usecs calling proc_interrupts_init+0x0/0x27 @ 1 initcall proc_interrupts_init+0x0/0x27 returned 0 after 11 usecs calling proc_loadavg_init+0x0/0x27 @ 1 initcall proc_loadavg_init+0x0/0x27 returned 0 after 12 usecs calling proc_meminfo_init+0x0/0x27 @ 1 initcall proc_meminfo_init+0x0/0x27 returned 0 after 11 usecs calling proc_stat_init+0x0/0x27 @ 1 initcall proc_stat_init+0x0/0x27 returned 0 after 12 usecs calling proc_uptime_init+0x0/0x27 @ 1 initcall proc_uptime_init+0x0/0x27 returned 0 after 11 usecs calling proc_version_init+0x0/0x27 @ 1 initcall proc_version_init+0x0/0x27 returned 0 after 11 usecs calling proc_softirqs_init+0x0/0x27 @ 1 initcall proc_softirqs_init+0x0/0x27 returned 0 after 11 usecs calling proc_kcore_init+0x0/0x7e @ 1 initcall proc_kcore_init+0x0/0x7e returned 0 after 20 usecs calling proc_kmsg_init+0x0/0x2a @ 1 initcall proc_kmsg_init+0x0/0x2a returned 0 after 12 usecs calling proc_page_init+0x0/0x4a @ 1 initcall proc_page_init+0x0/0x4a returned 0 after 19 usecs calling configfs_init+0x0/0xa8 @ 1 initcall configfs_init+0x0/0xa8 returned 0 after 23 usecs calling init_devpts_fs+0x0/0x52 @ 1 initcall init_devpts_fs+0x0/0x52 returned 0 after 82 usecs calling init_reiserfs_fs+0x0/0x70 @ 1 initcall init_reiserfs_fs+0x0/0x70 returned 0 after 27 usecs calling init_ext3_fs+0x0/0x76 @ 1 initcall init_ext3_fs+0x0/0x76 returned 0 after 48 usecs calling init_ext2_fs+0x0/0x76 @ 1 initcall init_ext2_fs+0x0/0x76 returned 0 after 38 usecs calling ext4_init_fs+0x0/0x1e6 @ 1 initcall ext4_init_fs+0x0/0x1e6 returned 0 after 161 usecs calling journal_init+0x0/0xeb @ 1 initcall journal_init+0x0/0xeb returned 0 after 67 usecs calling journal_init+0x0/0x120 @ 1 initcall journal_init+0x0/0x120 returned 0 after 87 usecs calling init_ramfs_fs+0x0/0x45 @ 1 initcall init_ramfs_fs+0x0/0x45 returned 0 after 4 usecs calling init_fat_fs+0x0/0x4c @ 1 initcall init_fat_fs+0x0/0x4c returned 0 after 26 usecs calling init_vfat_fs+0x0/0xf @ 1 initcall init_vfat_fs+0x0/0xf returned 0 after 4 usecs calling init_msdos_fs+0x0/0xf @ 1 initcall init_msdos_fs+0x0/0xf returned 0 after 4 usecs calling init_iso9660_fs+0x0/0x66 @ 1 initcall init_iso9660_fs+0x0/0x66 returned 0 after 16 usecs calling init_nfs_fs+0x0/0x159 @ 1 initcall init_nfs_fs+0x0/0x159 returned 0 after 432 usecs calling init_nfs_v2+0x0/0x11 @ 1 initcall init_nfs_v2+0x0/0x11 returned 0 after 13 usecs calling init_nfs_v4+0x0/0x40 @ 1 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered initcall init_nfs_v4+0x0/0x40 returned 0 after 3527 usecs calling init_nfsd+0x0/0x113 @ 1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). initcall init_nfsd+0x0/0x113 returned 0 after 1421 usecs calling init_nlm+0x0/0x3d @ 1 initcall init_nlm+0x0/0x3d returned 0 after 30 usecs calling init_nls_cp437+0x0/0xf @ 1 initcall init_nls_cp437+0x0/0xf returned 0 after 13 usecs calling init_nls_cp737+0x0/0xf @ 1 initcall init_nls_cp737+0x0/0xf returned 0 after 4 usecs calling init_nls_cp775+0x0/0xf @ 1 initcall init_nls_cp775+0x0/0xf returned 0 after 4 usecs calling init_nls_cp850+0x0/0xf @ 1 initcall init_nls_cp850+0x0/0xf returned 0 after 4 usecs calling init_nls_cp852+0x0/0xf @ 1 initcall init_nls_cp852+0x0/0xf returned 0 after 4 usecs calling init_nls_cp855+0x0/0xf @ 1 initcall init_nls_cp855+0x0/0xf returned 0 after 4 usecs calling init_nls_cp857+0x0/0xf @ 1 initcall init_nls_cp857+0x0/0xf returned 0 after 4 usecs calling init_nls_cp863+0x0/0xf @ 1 initcall init_nls_cp863+0x0/0xf returned 0 after 4 usecs calling init_nls_cp865+0x0/0xf @ 1 initcall init_nls_cp865+0x0/0xf returned 0 after 4 usecs calling init_nls_cp866+0x0/0xf @ 1 initcall init_nls_cp866+0x0/0xf returned 0 after 4 usecs calling init_nls_cp869+0x0/0xf @ 1 initcall init_nls_cp869+0x0/0xf returned 0 after 4 usecs calling init_nls_cp936+0x0/0xf @ 1 initcall init_nls_cp936+0x0/0xf returned 0 after 4 usecs calling init_nls_cp949+0x0/0xf @ 1 initcall init_nls_cp949+0x0/0xf returned 0 after 4 usecs calling init_nls_cp950+0x0/0xf @ 1 initcall init_nls_cp950+0x0/0xf returned 0 after 4 usecs calling init_nls_cp1250+0x0/0xf @ 1 initcall init_nls_cp1250+0x0/0xf returned 0 after 17 usecs calling init_nls_ascii+0x0/0xf @ 1 initcall init_nls_ascii+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_1+0x0/0xf @ 1 initcall init_nls_iso8859_1+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_2+0x0/0xf @ 1 initcall init_nls_iso8859_2+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_4+0x0/0xf @ 1 initcall init_nls_iso8859_4+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_6+0x0/0xf @ 1 initcall init_nls_iso8859_6+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_7+0x0/0xf @ 1 initcall init_nls_iso8859_7+0x0/0xf returned 0 after 4 usecs calling init_nls_cp1255+0x0/0xf @ 1 initcall init_nls_cp1255+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_9+0x0/0xf @ 1 initcall init_nls_iso8859_9+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_13+0x0/0xf @ 1 initcall init_nls_iso8859_13+0x0/0xf returned 0 after 4 usecs calling init_nls_iso8859_15+0x0/0xf @ 1 initcall init_nls_iso8859_15+0x0/0xf returned 0 after 4 usecs calling init_nls_utf8+0x0/0x1f @ 1 initcall init_nls_utf8+0x0/0x1f returned 0 after 4 usecs calling init_nls_macceltic+0x0/0xf @ 1 initcall init_nls_macceltic+0x0/0xf returned 0 after 4 usecs calling init_nls_maccroatian+0x0/0xf @ 1 initcall init_nls_maccroatian+0x0/0xf returned 0 after 4 usecs calling init_nls_maccyrillic+0x0/0xf @ 1 initcall init_nls_maccyrillic+0x0/0xf returned 0 after 4 usecs calling init_nls_macgreek+0x0/0xf @ 1 initcall init_nls_macgreek+0x0/0xf returned 0 after 4 usecs calling init_nls_maciceland+0x0/0xf @ 1 initcall init_nls_maciceland+0x0/0xf returned 0 after 17 usecs calling init_nls_macinuit+0x0/0xf @ 1 initcall init_nls_macinuit+0x0/0xf returned 0 after 4 usecs calling init_nls_macromanian+0x0/0xf @ 1 initcall init_nls_macromanian+0x0/0xf returned 0 after 4 usecs calling init_cifs+0x0/0x45a @ 1 FS-Cache: Netfs 'cifs' registered for caching Key type cifs.spnego registered initcall init_cifs+0x0/0x45a returned 0 after 2218 usecs calling init_ncp_fs+0x0/0x66 @ 1 initcall init_ncp_fs+0x0/0x66 returned 0 after 23 usecs calling init_ntfs_fs+0x0/0x23c @ 1 NTFS driver 2.1.30 [Flags: R/W DEBUG]. initcall init_ntfs_fs+0x0/0x23c returned 0 after 998 usecs calling init_autofs4_fs+0x0/0x24 @ 1 initcall init_autofs4_fs+0x0/0x24 returned 0 after 102 usecs calling fuse_init+0x0/0x19d @ 1 fuse init (API version 7.22) initcall fuse_init+0x0/0x19d returned 0 after 1317 usecs calling cuse_init+0x0/0x93 @ 1 initcall cuse_init+0x0/0x93 returned 0 after 90 usecs calling init_udf_fs+0x0/0x66 @ 1 initcall init_udf_fs+0x0/0x66 returned 0 after 18 usecs calling init_xfs_fs+0x0/0xcf @ 1 SGI XFS with security attributes, realtime, debug enabled initcall init_xfs_fs+0x0/0xcf returned 0 after 1705 usecs calling init_v9fs+0x0/0xf3 @ 1 9p: Installing v9fs 9p2000 file system support FS-Cache: Netfs '9p' registered for caching initcall init_v9fs+0x0/0xf3 returned 0 after 1137 usecs calling init_btrfs_fs+0x0/0x11f @ 1 bio: create slab at 1 Btrfs loaded, assert=on btrfs: selftest: Running btrfs free space cache tests btrfs: selftest: Running extent only tests btrfs: selftest: Running bitmap only tests btrfs: selftest: Running bitmap and extent tests btrfs: selftest: Free space cache tests finished initcall init_btrfs_fs+0x0/0x11f returned 0 after 6991 usecs calling init_ceph+0x0/0x146 @ 1 FS-Cache: Netfs 'ceph' registered for caching ceph: loaded (mds proto 32) initcall init_ceph+0x0/0x146 returned 0 after 2158 usecs calling init_mqueue_fs+0x0/0x9e @ 1 initcall init_mqueue_fs+0x0/0x9e returned 0 after 115 usecs calling key_proc_init+0x0/0x37 @ 1 initcall key_proc_init+0x0/0x37 returned 0 after 13 usecs calling crypto_wq_init+0x0/0x41 @ 1 initcall crypto_wq_init+0x0/0x41 returned 0 after 50 usecs calling crypto_algapi_init+0x0/0xc @ 1 initcall crypto_algapi_init+0x0/0xc returned 0 after 27 usecs calling skcipher_module_init+0x0/0x11 @ 1 initcall skcipher_module_init+0x0/0x11 returned 0 after 3 usecs calling chainiv_module_init+0x0/0xf @ 1 initcall chainiv_module_init+0x0/0xf returned 0 after 5 usecs calling eseqiv_module_init+0x0/0xf @ 1 initcall eseqiv_module_init+0x0/0xf returned 0 after 4 usecs calling seqiv_module_init+0x0/0xf @ 1 initcall seqiv_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_user_init+0x0/0x42 @ 1 initcall crypto_user_init+0x0/0x42 returned 0 after 26 usecs calling crypto_cmac_module_init+0x0/0xf @ 1 initcall crypto_cmac_module_init+0x0/0xf returned 0 after 4 usecs calling hmac_module_init+0x0/0xf @ 1 initcall hmac_module_init+0x0/0xf returned 0 after 4 usecs calling vmac_module_init+0x0/0xf @ 1 initcall vmac_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_xcbc_module_init+0x0/0xf @ 1 initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_null_mod_init+0x0/0x41 @ 1 initcall crypto_null_mod_init+0x0/0x41 returned 0 after 289 usecs calling md4_mod_init+0x0/0xf @ 1 initcall md4_mod_init+0x0/0xf returned 0 after 184 usecs calling md5_mod_init+0x0/0xf @ 1 initcall md5_mod_init+0x0/0xf returned 0 after 176 usecs calling rmd128_mod_init+0x0/0xf @ 1 initcall rmd128_mod_init+0x0/0xf returned 0 after 210 usecs calling rmd160_mod_init+0x0/0xf @ 1 initcall rmd160_mod_init+0x0/0xf returned 0 after 229 usecs calling rmd256_mod_init+0x0/0xf @ 1 initcall rmd256_mod_init+0x0/0xf returned 0 after 198 usecs calling rmd320_mod_init+0x0/0xf @ 1 initcall rmd320_mod_init+0x0/0xf returned 0 after 214 usecs calling sha1_generic_mod_init+0x0/0xf @ 1 initcall sha1_generic_mod_init+0x0/0xf returned 0 after 175 usecs calling sha256_generic_mod_init+0x0/0x14 @ 1 initcall sha256_generic_mod_init+0x0/0x14 returned 0 after 351 usecs calling sha512_generic_mod_init+0x0/0x14 @ 1 initcall sha512_generic_mod_init+0x0/0x14 returned 0 after 545 usecs calling wp512_mod_init+0x0/0x14 @ 1 initcall wp512_mod_init+0x0/0x14 returned 0 after 1128 usecs calling crypto_ecb_module_init+0x0/0xf @ 1 initcall crypto_ecb_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_cbc_module_init+0x0/0xf @ 1 initcall crypto_cbc_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_pcbc_module_init+0x0/0xf @ 1 initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_module_init+0x0/0xf @ 1 initcall crypto_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_module_init+0x0/0xf @ 1 initcall crypto_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_ctr_module_init+0x0/0x33 @ 1 initcall crypto_ctr_module_init+0x0/0x33 returned 0 after 4 usecs calling crypto_gcm_module_init+0x0/0x95 @ 1 initcall crypto_gcm_module_init+0x0/0x95 returned 0 after 5 usecs calling crypto_ccm_module_init+0x0/0x4d @ 1 initcall crypto_ccm_module_init+0x0/0x4d returned 0 after 4 usecs calling des_generic_mod_init+0x0/0x14 @ 1 initcall des_generic_mod_init+0x0/0x14 returned 0 after 249 usecs calling fcrypt_mod_init+0x0/0xf @ 1 initcall fcrypt_mod_init+0x0/0xf returned 0 after 111 usecs calling serpent_mod_init+0x0/0x14 @ 1 initcall serpent_mod_init+0x0/0x14 returned 0 after 250 usecs calling aes_init+0x0/0xf @ 1 initcall aes_init+0x0/0xf returned 0 after 133 usecs calling camellia_init+0x0/0xf @ 1 initcall camellia_init+0x0/0xf returned 0 after 126 usecs calling cast5_mod_init+0x0/0xf @ 1 initcall cast5_mod_init+0x0/0xf returned 0 after 137 usecs calling cast6_mod_init+0x0/0xf @ 1 initcall cast6_mod_init+0x0/0xf returned 0 after 139 usecs calling arc4_init+0x0/0x14 @ 1 initcall arc4_init+0x0/0x14 returned 0 after 605 usecs calling tea_mod_init+0x0/0x14 @ 1 initcall tea_mod_init+0x0/0x14 returned 0 after 329 usecs calling anubis_mod_init+0x0/0xf @ 1 initcall anubis_mod_init+0x0/0xf returned 0 after 168 usecs calling deflate_mod_init+0x0/0xf @ 1 initcall deflate_mod_init+0x0/0xf returned 0 after 527 usecs calling zlib_mod_init+0x0/0xf @ 1 initcall zlib_mod_init+0x0/0xf returned 0 after 727 usecs calling michael_mic_init+0x0/0xf @ 1 initcall michael_mic_init+0x0/0xf returned 0 after 234 usecs calling crc32c_mod_init+0x0/0xf @ 1 initcall crc32c_mod_init+0x0/0xf returned 0 after 306 usecs calling crc32_mod_init+0x0/0xf @ 1 alg: No test for crc32 (crc32-table) initcall crc32_mod_init+0x0/0xf returned 0 after 609 usecs calling crct10dif_mod_init+0x0/0xf @ 1 initcall crct10dif_mod_init+0x0/0xf returned 0 after 142 usecs calling crypto_authenc_module_init+0x0/0xf @ 1 initcall crypto_authenc_module_init+0x0/0xf returned 0 after 4 usecs calling crypto_authenc_esn_module_init+0x0/0xf @ 1 initcall crypto_authenc_esn_module_init+0x0/0xf returned 0 after 4 usecs calling lzo_mod_init+0x0/0xf @ 1 initcall lzo_mod_init+0x0/0xf returned 0 after 107 usecs calling lz4_mod_init+0x0/0xf @ 1 alg: No test for lz4 (lz4-generic) initcall lz4_mod_init+0x0/0xf returned 0 after 271 usecs calling lz4hc_mod_init+0x0/0xf @ 1 alg: No test for lz4hc (lz4hc-generic) initcall lz4hc_mod_init+0x0/0xf returned 0 after 946 usecs calling krng_mod_init+0x0/0xf @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0xf returned 0 after 1546 usecs calling prng_mod_init+0x0/0x14 @ 1 alg: No test for fips(ansi_cprng) (fips_ansi_cprng) initcall prng_mod_init+0x0/0x14 returned 0 after 8854 usecs calling ghash_mod_init+0x0/0xf @ 1 initcall ghash_mod_init+0x0/0xf returned 0 after 198 usecs calling af_alg_init+0x0/0x35 @ 1 NET: Registered protocol family 38 initcall af_alg_init+0x0/0x35 returned 0 after 1229 usecs calling algif_hash_init+0x0/0xf @ 1 initcall algif_hash_init+0x0/0xf returned 0 after 13 usecs calling asymmetric_key_init+0x0/0xf @ 1 Key type asymmetric registered initcall asymmetric_key_init+0x0/0xf returned 0 after 1527 usecs calling proc_genhd_init+0x0/0x44 @ 1 initcall proc_genhd_init+0x0/0x44 returned 0 after 27 usecs calling bsg_init+0x0/0x154 @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) initcall bsg_init+0x0/0x154 returned 0 after 1127 usecs calling noop_init+0x0/0xf @ 1 io scheduler noop registered (default) initcall noop_init+0x0/0xf returned 0 after 928 usecs calling deadline_init+0x0/0xf @ 1 io scheduler deadline registered initcall deadline_init+0x0/0xf returned 0 after 889 usecs calling cfq_init+0x0/0x8b @ 1 io scheduler cfq registered initcall cfq_init+0x0/0x8b returned 0 after 1019 usecs calling test_kstrtox_init+0x0/0xb32 @ 1 initcall test_kstrtox_init+0x0/0xb32 returned -22 after 63 usecs calling btree_module_init+0x0/0x2f @ 1 initcall btree_module_init+0x0/0x2f returned 0 after 18 usecs calling crc_t10dif_mod_init+0x0/0x35 @ 1 initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 5 usecs calling crc32test_init+0x0/0x339 @ 1 crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8 crc32: self tests passed, processed 225944 bytes in 0 nsec crc32c: CRC_LE_BITS = 8 crc32c: self tests passed, processed 225944 bytes in 0 nsec initcall crc32test_init+0x0/0x339 returned 0 after 6803 usecs calling libcrc32c_mod_init+0x0/0x24 @ 1 initcall libcrc32c_mod_init+0x0/0x24 returned 0 after 5 usecs calling init_kmp+0x0/0xf @ 1 initcall init_kmp+0x0/0xf returned 0 after 13 usecs calling init_bm+0x0/0xf @ 1 initcall init_bm+0x0/0xf returned 0 after 4 usecs calling init_fsm+0x0/0xf @ 1 initcall init_fsm+0x0/0xf returned 0 after 4 usecs calling audit_classes_init+0x0/0x4f @ 1 initcall audit_classes_init+0x0/0x4f returned 0 after 28 usecs calling err_inject_init+0x0/0x1e @ 1 initcall err_inject_init+0x0/0x1e returned 0 after 25 usecs calling digsig_init+0x0/0x36 @ 1 initcall digsig_init+0x0/0x36 returned 0 after 5 usecs calling rbtree_test_init+0x0/0x208 @ 1 rbtree testingrbtree testing -> 20477 cycles -> 20477 cycles augmented rbtree testingaugmented rbtree testing -> 28701 cycles -> 28701 cycles initcall rbtree_test_init+0x0/0x208 returned -11 after 2519126 usecs calling bgpio_driver_init+0x0/0x11 @ 1 initcall bgpio_driver_init+0x0/0x11 returned 0 after 40 usecs calling adnp_i2c_driver_init+0x0/0x11 @ 1 initcall adnp_i2c_driver_init+0x0/0x11 returned 0 after 52 usecs calling adp5588_gpio_driver_init+0x0/0x11 @ 1 initcall adp5588_gpio_driver_init+0x0/0x11 returned 0 after 25 usecs calling amd_gpio_init+0x0/0x155 @ 1 initcall amd_gpio_init+0x0/0x155 returned -19 after 19 usecs calling bt8xxgpio_pci_driver_init+0x0/0x16 @ 1 initcall bt8xxgpio_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling cs5535_gpio_driver_init+0x0/0x11 @ 1 initcall cs5535_gpio_driver_init+0x0/0x11 returned 0 after 27 usecs calling grgpio_driver_init+0x0/0x11 @ 1 initcall grgpio_driver_init+0x0/0x11 returned 0 after 27 usecs calling ichx_gpio_driver_init+0x0/0x11 @ 1 initcall ichx_gpio_driver_init+0x0/0x11 returned 0 after 26 usecs calling it8761e_gpio_init+0x0/0x180 @ 1 initcall it8761e_gpio_init+0x0/0x180 returned -19 after 46 usecs calling ttl_driver_init+0x0/0x11 @ 1 initcall ttl_driver_init+0x0/0x11 returned 0 after 27 usecs calling kempld_gpio_driver_init+0x0/0x11 @ 1 initcall kempld_gpio_driver_init+0x0/0x11 returned 0 after 27 usecs calling lnw_gpio_init+0x0/0x16 @ 1 initcall lnw_gpio_init+0x0/0x16 returned 0 after 40 usecs calling ioh_gpio_driver_init+0x0/0x16 @ 1 initcall ioh_gpio_driver_init+0x0/0x16 returned 0 after 32 usecs calling pch_gpio_driver_init+0x0/0x16 @ 1 initcall pch_gpio_driver_init+0x0/0x16 returned 0 after 33 usecs calling sch_gpio_driver_init+0x0/0x11 @ 1 initcall sch_gpio_driver_init+0x0/0x11 returned 0 after 33 usecs calling sdv_gpio_driver_init+0x0/0x16 @ 1 initcall sdv_gpio_driver_init+0x0/0x16 returned 0 after 33 usecs calling timbgpio_platform_driver_init+0x0/0x11 @ 1 initcall timbgpio_platform_driver_init+0x0/0x11 returned 0 after 26 usecs calling ts5500_dio_driver_init+0x0/0x11 @ 1 initcall ts5500_dio_driver_init+0x0/0x11 returned 0 after 27 usecs calling gpo_twl6040_driver_init+0x0/0x11 @ 1 initcall gpo_twl6040_driver_init+0x0/0x11 returned 0 after 27 usecs calling vx855gpio_driver_init+0x0/0x11 @ 1 initcall vx855gpio_driver_init+0x0/0x11 returned 0 after 33 usecs calling pca9685_i2c_driver_init+0x0/0x11 @ 1 initcall pca9685_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs calling twl_pwmled_driver_init+0x0/0x11 @ 1 initcall twl_pwmled_driver_init+0x0/0x11 returned 0 after 27 usecs calling pci_proc_init+0x0/0x64 @ 1 initcall pci_proc_init+0x0/0x64 returned 0 after 222 usecs calling pci_hotplug_init+0x0/0x4f @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x4f returned 0 after 500 usecs calling cpcihp_generic_init+0x0/0x428 @ 1 cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 cpcihp_generic: not configured, disabling. initcall cpcihp_generic_init+0x0/0x428 returned -22 after 2431 usecs calling shpcd_init+0x0/0x5f @ 1 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0x5f returned 0 after 750 usecs calling fb_console_init+0x0/0x108 @ 1 initcall fb_console_init+0x0/0x108 returned 0 after 66 usecs calling pm860x_backlight_driver_init+0x0/0x11 @ 1 initcall pm860x_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs calling bd6107_driver_init+0x0/0x11 @ 1 initcall bd6107_driver_init+0x0/0x11 returned 0 after 31 usecs calling da903x_backlight_driver_init+0x0/0x11 @ 1 initcall da903x_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs calling gpio_backlight_driver_init+0x0/0x11 @ 1 initcall gpio_backlight_driver_init+0x0/0x11 returned 0 after 26 usecs calling lm3533_bl_driver_init+0x0/0x11 @ 1 initcall lm3533_bl_driver_init+0x0/0x11 returned 0 after 27 usecs calling lm3630_i2c_driver_init+0x0/0x11 @ 1 initcall lm3630_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs calling lp8788_bl_driver_init+0x0/0x11 @ 1 initcall lp8788_bl_driver_init+0x0/0x11 returned 0 after 27 usecs calling ot200_backlight_driver_init+0x0/0x11 @ 1 initcall ot200_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs calling pandora_backlight_driver_init+0x0/0x11 @ 1 initcall pandora_backlight_driver_init+0x0/0x11 returned 0 after 26 usecs calling kb3886_init+0x0/0xa @ 1 initcall kb3886_init+0x0/0xa returned -19 after 4 usecs calling tps65217_bl_driver_init+0x0/0x11 @ 1 initcall tps65217_bl_driver_init+0x0/0x11 returned 0 after 27 usecs calling arcfb_init+0x0/0x66 @ 1 initcall arcfb_init+0x0/0x66 returned -6 after 4 usecs calling pm2fb_init+0x0/0x120 @ 1 initcall pm2fb_init+0x0/0x120 returned 0 after 40 usecs calling i740fb_init+0x0/0x99 @ 1 initcall i740fb_init+0x0/0x99 returned 0 after 34 usecs calling matroxfb_init+0x0/0x24b @ 1 initcall matroxfb_init+0x0/0x24b returned 0 after 49 usecs calling i2c_matroxfb_init+0x0/0x29 @ 1 initcall i2c_matroxfb_init+0x0/0x29 returned 0 after 4 usecs calling rivafb_init+0x0/0x18e @ 1 rivafb_setup START initcall rivafb_init+0x0/0x18e returned 0 after 516 usecs calling nvidiafb_init+0x0/0x288 @ 1 nvidiafb_setup START initcall nvidiafb_init+0x0/0x288 returned 0 after 842 usecs calling aty128fb_init+0x0/0x111 @ 1 initcall aty128fb_init+0x0/0x111 returned 0 after 38 usecs calling savagefb_init+0x0/0x5e @ 1 initcall savagefb_init+0x0/0x5e returned 0 after 41 usecs calling neofb_init+0x0/0x11d @ 1 initcall neofb_init+0x0/0x11d returned 0 after 34 usecs calling tdfxfb_init+0x0/0x105 @ 1 initcall tdfxfb_init+0x0/0x105 returned 0 after 33 usecs calling imsttfb_init+0x0/0xdd @ 1 initcall imsttfb_init+0x0/0xdd returned 0 after 34 usecs calling vt8623fb_init+0x0/0x6c @ 1 initcall vt8623fb_init+0x0/0x6c returned 0 after 33 usecs calling tridentfb_init+0x0/0x1db @ 1 initcall tridentfb_init+0x0/0x1db returned 0 after 36 usecs calling vmlfb_init+0x0/0x82 @ 1 vmlfb: initializing initcall vmlfb_init+0x0/0x82 returned 0 after 679 usecs calling cr_pll_init+0x0/0xd3 @ 1 Could not find Carillo Ranch MCH device. initcall cr_pll_init+0x0/0xd3 returned -19 after 1266 usecs calling s3fb_init+0x0/0xf1 @ 1 initcall s3fb_init+0x0/0xf1 returned 0 after 34 usecs calling arkfb_init+0x0/0x6c @ 1 initcall arkfb_init+0x0/0x6c returned 0 after 33 usecs calling hecubafb_init+0x0/0x11 @ 1 initcall hecubafb_init+0x0/0x11 returned 0 after 33 usecs calling n411_init+0x0/0x7f @ 1 no IO addresses supplied initcall n411_init+0x0/0x7f returned -22 after 1501 usecs calling hgafb_init+0x0/0x6f @ 1 hgafb: HGA card not detected. hgafb: probe of hgafb.0 failed with error -22 initcall hgafb_init+0x0/0x6f returned 0 after 2499 usecs calling sstfb_init+0x0/0x176 @ 1 initcall sstfb_init+0x0/0x176 returned 0 after 40 usecs calling s1d13xxxfb_init+0x0/0x28 @ 1 initcall s1d13xxxfb_init+0x0/0x28 returned 0 after 27 usecs calling sm501fb_driver_init+0x0/0x11 @ 1 initcall sm501fb_driver_init+0x0/0x11 returned 0 after 26 usecs calling ufx_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver smscufx initcall ufx_driver_init+0x0/0x16 returned 0 after 670 usecs calling carminefb_init+0x0/0x33 @ 1 initcall carminefb_init+0x0/0x33 returned 0 after 33 usecs calling ssd1307fb_driver_init+0x0/0x11 @ 1 initcall ssd1307fb_driver_init+0x0/0x11 returned 0 after 40 usecs calling ipmi_init_msghandler_mod+0x0/0xc @ 1 ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 1071 usecs calling init_ipmi_devintf+0x0/0xf3 @ 1 ipmi device interface initcall init_ipmi_devintf+0x0/0xf3 returned 0 after 1022 usecs calling init_ipmi_si+0x0/0x4e6 @ 1 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machineipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed Switched to clocksource tsc ipmi_si: Adding default-specified smic state machineipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machineipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) initcall init_ipmi_si+0x0/0x4e6 returned -19 after 82793 usecs calling ipmi_wdog_init+0x0/0x117 @ 1 IPMI Watchdog: driver initialized initcall ipmi_wdog_init+0x0/0x117 returned 0 after 5941 usecs calling ipmi_poweroff_init+0x0/0x7f @ 1 Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. initcall ipmi_poweroff_init+0x0/0x7f returned 0 after 12394 usecs calling pnpbios_thread_init+0x0/0x6c @ 1 initcall pnpbios_thread_init+0x0/0x6c returned 0 after 31 usecs calling isapnp_init+0x0/0x5de @ 1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found initcall isapnp_init+0x0/0x5de returned 0 after 359039 usecs calling virtio_mmio_init+0x0/0x11 @ 1 initcall virtio_mmio_init+0x0/0x11 returned 0 after 23 usecs calling virtio_pci_driver_init+0x0/0x16 @ 1 initcall virtio_pci_driver_init+0x0/0x16 returned 0 after 30 usecs calling virtio_balloon_driver_init+0x0/0xf @ 1 initcall virtio_balloon_driver_init+0x0/0xf returned 0 after 21 usecs calling regulator_virtual_consumer_driver_init+0x0/0x11 @ 1 initcall regulator_virtual_consumer_driver_init+0x0/0x11 returned 0 after 24 usecs calling regulator_userspace_consumer_driver_init+0x0/0x11 @ 1 initcall regulator_userspace_consumer_driver_init+0x0/0x11 returned 0 after 23 usecs calling pm800_regulator_driver_init+0x0/0x11 @ 1 initcall pm800_regulator_driver_init+0x0/0x11 returned 0 after 23 usecs calling da9210_regulator_driver_init+0x0/0x11 @ 1 initcall da9210_regulator_driver_init+0x0/0x11 returned 0 after 22 usecs calling lp3971_i2c_driver_init+0x0/0x11 @ 1 initcall lp3971_i2c_driver_init+0x0/0x11 returned 0 after 21 usecs calling pfuze_driver_init+0x0/0x11 @ 1 initcall pfuze_driver_init+0x0/0x11 returned 0 after 29 usecs calling wm8994_ldo_driver_init+0x0/0x11 @ 1 initcall wm8994_ldo_driver_init+0x0/0x11 returned 0 after 23 usecs calling pty_init+0x0/0x357 @ 1 initcall pty_init+0x0/0x357 returned 0 after 34834 usecs calling sysrq_init+0x0/0xb6 @ 1 initcall sysrq_init+0x0/0xb6 returned 0 after 20 usecs calling gsm_init+0x0/0x141 @ 1 initcall gsm_init+0x0/0x141 returned 0 after 44 usecs calling serial8250_init+0x0/0x15a @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A initcall serial8250_init+0x0/0x15a returned 0 after 42661 usecs calling serial_pci_driver_init+0x0/0x16 @ 1 initcall serial_pci_driver_init+0x0/0x16 returned 0 after 77 usecs calling dw8250_platform_driver_init+0x0/0x11 @ 1 initcall dw8250_platform_driver_init+0x0/0x11 returned 0 after 25 usecs calling ulite_init+0x0/0x87 @ 1 initcall ulite_init+0x0/0x87 returned 0 after 53 usecs calling altera_uart_init+0x0/0x35 @ 1 initcall altera_uart_init+0x0/0x35 returned 0 after 52 usecs calling asc_init+0x0/0x43 @ 1 STMicroelectronics ASC driver initialized initcall asc_init+0x0/0x43 returned 0 after 7345 usecs calling init_kgdboc+0x0/0x15 @ 1 initcall init_kgdboc+0x0/0x15 returned 0 after 1 usecs calling timbuart_platform_driver_init+0x0/0x11 @ 1 initcall timbuart_platform_driver_init+0x0/0x11 returned 0 after 24 usecs calling altera_jtaguart_init+0x0/0x35 @ 1 initcall altera_jtaguart_init+0x0/0x35 returned 0 after 43 usecs calling hsu_pci_init+0x0/0x2b1 @ 1 initcall hsu_pci_init+0x0/0x2b1 returned 0 after 210 usecs calling pch_uart_module_init+0x0/0x3a @ 1 initcall pch_uart_module_init+0x0/0x3a returned 0 after 68 usecs calling xuartps_init+0x0/0x35 @ 1 initcall xuartps_init+0x0/0x35 returned 0 after 45 usecs calling rp2_uart_init+0x0/0x3a @ 1 initcall rp2_uart_init+0x0/0x3a returned 0 after 106 usecs calling lpuart_serial_init+0x0/0x43 @ 1 serial: Freescale lpuart driver initcall lpuart_serial_init+0x0/0x43 returned 0 after 5667 usecs calling nozomi_init+0x0/0x100 @ 1 Initializing Nozomi driver 2.1d initcall nozomi_init+0x0/0x100 returned 0 after 5696 usecs calling rand_initialize+0x0/0x25 @ 1 initcall rand_initialize+0x0/0x25 returned 0 after 43 usecs calling init+0x0/0xf3 @ 1 initcall init+0x0/0xf3 returned 0 after 77 usecs calling raw_init+0x0/0x135 @ 1 initcall raw_init+0x0/0x135 returned 0 after 160 usecs calling lp_init_module+0x0/0x210 @ 1 lp: driver loaded but no devices found initcall lp_init_module+0x0/0x210 returned 0 after 6790 usecs calling dtlk_init+0x0/0x1d1 @ 1 DoubleTalk PC - not found initcall dtlk_init+0x0/0x1d1 returned -19 after 4597 usecs calling applicom_init+0x0/0x484 @ 1 Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. initcall applicom_init+0x0/0x484 returned -6 after 27475 usecs calling i8k_init+0x0/0x30d @ 1 initcall i8k_init+0x0/0x30d returned -19 after 0 usecs calling timeriomem_rng_driver_init+0x0/0x11 @ 1 initcall timeriomem_rng_driver_init+0x0/0x11 returned 0 after 24 usecs calling mod_init+0x0/0x1dc @ 1 initcall mod_init+0x0/0x1dc returned -19 after 111 usecs calling mod_init+0x0/0x11a @ 1 initcall mod_init+0x0/0x11a returned -19 after 11 usecs calling mod_init+0x0/0x9a @ 1 initcall mod_init+0x0/0x9a returned -19 after 8 usecs calling mod_init+0x0/0x48 @ 1 initcall mod_init+0x0/0x48 returned -19 after 0 usecs calling virtio_rng_driver_init+0x0/0xf @ 1 initcall virtio_rng_driver_init+0x0/0xf returned 0 after 21 usecs calling rng_init+0x0/0xf @ 1 initcall rng_init+0x0/0xf returned 0 after 136 usecs calling ppdev_init+0x0/0xba @ 1 ppdev: user-space parallel port driver initcall ppdev_init+0x0/0xba returned 0 after 6789 usecs calling pc8736x_gpio_init+0x0/0x2dd @ 1 platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing platform pc8736x_gpio.0: no device found initcall pc8736x_gpio_init+0x0/0x2dd returned -19 after 18607 usecs calling nsc_gpio_init+0x0/0x14 @ 1 nsc_gpio initializing initcall nsc_gpio_init+0x0/0x14 returned 0 after 3910 usecs calling tlclk_init+0x0/0x1d9 @ 1 telclk_interrupt = 0xf non-mcpbl0010 hw. initcall tlclk_init+0x0/0x1d9 returned -6 after 7128 usecs calling mwave_init+0x0/0x1e5 @ 1 smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize initcall mwave_init+0x0/0x1e5 returned -5 after 44250 usecs calling agp_init+0x0/0x32 @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x32 returned 0 after 5434 usecs calling agp_ali_init+0x0/0x27 @ 1 initcall agp_ali_init+0x0/0x27 returned 0 after 37 usecs calling agp_intel_init+0x0/0x27 @ 1 initcall agp_intel_init+0x0/0x27 returned 0 after 34 usecs calling agp_nvidia_init+0x0/0x27 @ 1 initcall agp_nvidia_init+0x0/0x27 returned 0 after 36 usecs calling agp_sis_init+0x0/0x27 @ 1 initcall agp_sis_init+0x0/0x27 returned 0 after 31 usecs calling agp_serverworks_init+0x0/0x27 @ 1 initcall agp_serverworks_init+0x0/0x27 returned 0 after 29 usecs calling agp_via_init+0x0/0x27 @ 1 initcall agp_via_init+0x0/0x27 returned 0 after 33 usecs calling synclink_cs_init+0x0/0x103 @ 1 SyncLink PC Card driver $Revision: 4.34 $, tty major#242 initcall synclink_cs_init+0x0/0x103 returned 0 after 9837 usecs calling cmm_init+0x0/0xa7 @ 1 initcall cmm_init+0x0/0xa7 returned 0 after 53 usecs calling cm4040_init+0x0/0xa7 @ 1 initcall cm4040_init+0x0/0xa7 returned 0 after 55 usecs calling hangcheck_init+0x0/0xab @ 1 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using getrawmonotonic(). initcall hangcheck_init+0x0/0xab returned 0 after 21193 usecs calling init_tis+0x0/0x9d @ 1 initcall init_tis+0x0/0x9d returned 0 after 32 usecs calling tpm_tis_i2c_driver_init+0x0/0x11 @ 1 initcall tpm_tis_i2c_driver_init+0x0/0x11 returned 0 after 35 usecs calling init_nsc+0x0/0x570 @ 1 initcall init_nsc+0x0/0x570 returned -19 after 10 usecs calling init_inf+0x0/0xf @ 1 initcall init_inf+0x0/0xf returned 0 after 23 usecs calling i810fb_init+0x0/0x33e @ 1 initcall i810fb_init+0x0/0x33e returned 0 after 31 usecs calling parport_default_proc_register+0x0/0x16 @ 1 initcall parport_default_proc_register+0x0/0x16 returned 0 after 24 usecs calling parport_pc_init+0x0/0x336 @ 1 IT8712 SuperIO detected. parport_pc 00:0e: reported by Plug and Play BIOS parport0: PC-style at 0x378parport0: PC-style at 0x378 (0x778) (0x778), irq 7, irq 7 [ [PCSPPPCSPP,TRISTATE,TRISTATE] ] lp0: using parport0 (interrupt-driven). initcall parport_pc_init+0x0/0x336 returned 0 after 110351 usecs calling parport_serial_init+0x0/0x16 @ 1 initcall parport_serial_init+0x0/0x16 returned 0 after 35 usecs calling parport_cs_driver_init+0x0/0xf @ 1 initcall parport_cs_driver_init+0x0/0xf returned 0 after 24 usecs calling axdrv_init+0x0/0x11 @ 1 initcall axdrv_init+0x0/0x11 returned 0 after 25 usecs calling topology_sysfs_init+0x0/0x19 @ 1 initcall topology_sysfs_init+0x0/0x19 returned 0 after 10 usecs calling isa_bus_init+0x0/0x33 @ 1 initcall isa_bus_init+0x0/0x33 returned 0 after 43 usecs calling floppy_init+0x0/0x13 @ 1 initcall floppy_init+0x0/0x13 returned 0 after 15 usecs calling loop_init+0x0/0x129 @ 1 loop: module loaded initcall loop_init+0x0/0x129 returned 0 after 5479 usecs calling cpqarray_init+0x0/0x26d @ 1 Compaq SMART2 Driver (v 2.6.0) initcall cpqarray_init+0x0/0x26d returned -19 after 5496 usecs calling cciss_init+0x0/0x9b @ 1 HP CISS Driver (v 3.6.26) calling 1_floppy_async_init+0x0/0xa @ 6 Floppy drive(s):Floppy drive(s): fd0 is 1.44M fd0 is 1.44M initcall cciss_init+0x0/0x9b returned 0 after 18234 usecs calling pkt_init+0x0/0x169 @ 1 initcall pkt_init+0x0/0x169 returned 0 after 181 usecs calling osdblk_init+0x0/0x7a @ 1 initcall osdblk_init+0x0/0x7a returned 0 after 27 usecs calling mm_init+0x0/0x168 @ 1 MM: desc_per_page = 128 initcall mm_init+0x0/0x168 returned 0 after 4250 usecs calling nbd_init+0x0/0x323 @ 1 nbd: registered device at major 43 initcall nbd_init+0x0/0x323 returned 0 after 10245 usecs calling init+0x0/0x8b @ 1 initcall init+0x0/0x8b returned 0 after 39 usecs calling carm_init+0x0/0x16 @ 1 initcall carm_init+0x0/0x16 returned 0 after 37 usecs calling mtip_init+0x0/0x13e @ 1 mtip32xx Version 1.2.6os3 initcall mtip_init+0x0/0x13e returned 0 after 4670 usecs calling ibmasm_init+0x0/0x69 @ 1 ibmasm: IBM ASM Service Processor Driver version 1.0 loaded initcall ibmasm_init+0x0/0x69 returned 0 after 10344 usecs calling dummy_irq_init+0x0/0x75 @ 1 dummy-irq: no IRQ given. Use irq=N initcall dummy_irq_init+0x0/0x75 returned -5 after 6280 usecs calling ics932s401_driver_init+0x0/0x11 @ 1 initcall ics932s401_driver_init+0x0/0x11 returned 0 after 28 usecs calling lkdtm_module_init+0x0/0x1b4 @ 1 lkdtm: No crash points registered, enable through debugfs initcall lkdtm_module_init+0x0/0x1b4 returned 0 after 10005 usecs calling tifm_7xx1_driver_init+0x0/0x16 @ 1 initcall tifm_7xx1_driver_init+0x0/0x16 returned 0 after 39 usecs calling phantom_init+0x0/0xed @ 1 Phantom Linux Driver, version n0.9.8, init OK initcall phantom_init+0x0/0xed returned 0 after 7975 usecs calling bh1780_driver_init+0x0/0x11 @ 1 initcall bh1780_driver_init+0x0/0x11 returned 0 after 30 usecs calling apds990x_driver_init+0x0/0x11 @ 1 initcall apds990x_driver_init+0x0/0x11 returned 0 after 29 usecs calling ioc4_init+0x0/0x16 @ 1 initcall ioc4_init+0x0/0x16 returned 0 after 30 usecs calling enclosure_init+0x0/0x14 @ 1 initcall enclosure_init+0x0/0x14 returned 0 after 22 usecs calling init_kgdbts+0x0/0x15 @ 1 initcall init_kgdbts+0x0/0x15 returned 0 after 0 usecs calling cs5535_mfgpt_init+0x0/0x11 @ 1 initcall cs5535_mfgpt_init+0x0/0x11 returned 0 after 32 usecs calling ilo_init+0x0/0x82 @ 1 initcall ilo_init+0x0/0x82 returned 0 after 78 usecs calling isl29020_driver_init+0x0/0x11 @ 1 initcall isl29020_driver_init+0x0/0x11 returned 0 after 30 usecs calling tsl2550_driver_init+0x0/0x11 @ 1 initcall tsl2550_driver_init+0x0/0x11 returned 0 after 22 usecs calling ds1682_driver_init+0x0/0x11 @ 1 initcall ds1682_driver_init+0x0/0x11 returned 0 after 21 usecs calling at24_init+0x0/0x43 @ 1 initcall at24_init+0x0/0x43 returned 0 after 22 usecs calling eeprom_driver_init+0x0/0x11 @ 1 initcall eeprom_driver_init+0x0/0x11 returned 0 after 21 usecs calling cb710_init_module+0x0/0x16 @ 1 initcall cb710_init_module+0x0/0x16 returned 0 after 32 usecs calling kim_platform_driver_init+0x0/0x11 @ 1 initcall kim_platform_driver_init+0x0/0x11 returned 0 after 24 usecs calling fsa9480_i2c_driver_init+0x0/0x11 @ 1 initcall fsa9480_i2c_driver_init+0x0/0x11 returned 0 after 22 usecs calling vmci_drv_init+0x0/0xcf @ 1 Guest personality initialized and is inactive VMCI host device registered (name=vmci, major=10, minor=60) Initialized host personality initcall vmci_drv_init+0x0/0xcf returned 0 after 24080 usecs calling sm501_base_init+0x0/0x22 @ 1 initcall sm501_base_init+0x0/0x22 returned 0 after 58 usecs calling cros_ec_driver_init+0x0/0x11 @ 1 initcall cros_ec_driver_init+0x0/0x11 returned 0 after 23 usecs calling rtsx_pci_driver_init+0x0/0x16 @ 1 initcall rtsx_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling pasic3_driver_init+0x0/0x14 @ 1 initcall pasic3_driver_init+0x0/0x14 returned -19 after 44 usecs calling htcpld_core_init+0x0/0x24 @ 1 initcall htcpld_core_init+0x0/0x24 returned -19 after 63 usecs calling ti_tscadc_driver_init+0x0/0x11 @ 1 initcall ti_tscadc_driver_init+0x0/0x11 returned 0 after 24 usecs calling wm8994_i2c_driver_init+0x0/0x11 @ 1 initcall wm8994_i2c_driver_init+0x0/0x11 returned 0 after 57 usecs calling twl_driver_init+0x0/0x11 @ 1 initcall twl_driver_init+0x0/0x11 returned 0 after 41 usecs calling twl4030_madc_driver_init+0x0/0x11 @ 1 initcall twl4030_madc_driver_init+0x0/0x11 returned 0 after 34 usecs calling twl4030_audio_driver_init+0x0/0x11 @ 1 initcall twl4030_audio_driver_init+0x0/0x11 returned 0 after 24 usecs calling twl6040_driver_init+0x0/0x11 @ 1 initcall twl6040_driver_init+0x0/0x11 returned 0 after 22 usecs calling timberdale_pci_driver_init+0x0/0x16 @ 1 initcall timberdale_pci_driver_init+0x0/0x16 returned 0 after 30 usecs calling kempld_init+0x0/0x5f @ 1 initcall kempld_init+0x0/0x5f returned -19 after 0 usecs calling lpc_sch_driver_init+0x0/0x16 @ 1 initcall lpc_sch_driver_init+0x0/0x16 returned 0 after 36 usecs calling lpc_ich_driver_init+0x0/0x16 @ 1 initcall lpc_ich_driver_init+0x0/0x16 returned 0 after 49 usecs calling rdc321x_sb_driver_init+0x0/0x16 @ 1 initcall rdc321x_sb_driver_init+0x0/0x16 returned 0 after 30 usecs calling cmodio_pci_driver_init+0x0/0x16 @ 1 initcall cmodio_pci_driver_init+0x0/0x16 returned 0 after 37 usecs calling vx855_pci_driver_init+0x0/0x16 @ 1 initcall vx855_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling si476x_core_driver_init+0x0/0x11 @ 1 initcall si476x_core_driver_init+0x0/0x11 returned 0 after 22 usecs calling cs5535_mfd_driver_init+0x0/0x16 @ 1 initcall cs5535_mfd_driver_init+0x0/0x16 returned 0 after 37 usecs calling vprbrd_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver viperboard initcall vprbrd_driver_init+0x0/0x16 returned 0 after 8989 usecs calling nfcwilink_driver_init+0x0/0x11 @ 1 initcall nfcwilink_driver_init+0x0/0x11 returned 0 after 23 usecs calling scsi_tgt_init+0x0/0x9d @ 1 FDC 0 is a post-1991 82077 initcall scsi_tgt_init+0x0/0x9d returned 0 after 5476 usecs calling raid_init+0x0/0xf @ 1 initcall raid_init+0x0/0xf returned 0 after 23 usecs calling spi_transport_init+0x0/0x79 @ 1 initcall spi_transport_init+0x0/0x79 returned 0 after 46 usecs calling fc_transport_init+0x0/0x71 @ 1 initcall fc_transport_init+0x0/0x71 returned 0 after 93 usecs calling iscsi_transport_init+0x0/0x199 @ 1 Loading iSCSI transport class v2.0-870. initcall iscsi_transport_init+0x0/0x199 returned 0 after 7239 usecs calling sas_transport_init+0x0/0x9f @ 1 initcall sas_transport_init+0x0/0x9f returned 0 after 127 usecs calling sas_class_init+0x0/0x38 @ 1 initcall sas_class_init+0x0/0x38 returned 0 after 14 usecs calling srp_transport_init+0x0/0x33 @ 1 initcall srp_transport_init+0x0/0x33 returned 0 after 43 usecs calling scsi_dh_init+0x0/0x35 @ 1 initcall scsi_dh_init+0x0/0x35 returned 0 after 1 usecs calling rdac_init+0x0/0x85 @ 1 rdac: device handler registered initcall rdac_init+0x0/0x85 returned 0 after 5661 usecs calling hp_sw_init+0x0/0xf @ 1 hp_sw: device handler registered initcall hp_sw_init+0x0/0xf returned 0 after 5773 usecs calling clariion_init+0x0/0x32 @ 1 emc: device handler registered initcall clariion_init+0x0/0x32 returned 0 after 5434 usecs calling alua_init+0x0/0x32 @ 1 alua: device handler registered initcall alua_init+0x0/0x32 returned 0 after 5603 usecs calling libfc_init+0x0/0x37 @ 1 initcall libfc_init+0x0/0x37 returned 0 after 152 usecs calling libfcoe_init+0x0/0x23 @ 1 initcall libfcoe_init+0x0/0x23 returned 0 after 37 usecs calling fnic_init_module+0x0/0x25d @ 1 fnic: Cisco FCoE HBA Driver, ver 1.5.0.23 fnic: Successfully Initialized Trace Buffer initcall fnic_init_module+0x0/0x25d returned 0 after 15159 usecs calling bnx2fc_mod_init+0x0/0x255 @ 1 bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.14 (Mar 08, 2013) initcall 1_floppy_async_init+0x0/0xa returned 0 after 1339307 usecs initcall bnx2fc_mod_init+0x0/0x255 returned 0 after 24511 usecs calling iscsi_sw_tcp_init+0x0/0x43 @ 1 iscsi: registered transport (tcp) initcall iscsi_sw_tcp_init+0x0/0x43 returned 0 after 5942 usecs calling arcmsr_module_init+0x0/0x16 @ 1 initcall arcmsr_module_init+0x0/0x16 returned 0 after 35 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 389 usecs calling aha152x_init+0x0/0x615 @ 1 initcall aha152x_init+0x0/0x615 returned -19 after 67 usecs calling ahc_linux_init+0x0/0x5a @ 1 initcall ahc_linux_init+0x0/0x5a returned 0 after 52 usecs calling ahd_linux_init+0x0/0x6c @ 1 initcall ahd_linux_init+0x0/0x6c returned 0 after 55 usecs calling aac_init+0x0/0x76 @ 1 Adaptec aacraid driver 1.2-0[30200]-ms initcall aac_init+0x0/0x76 returned 0 after 6836 usecs calling aic94xx_init+0x0/0x12d @ 1 aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded initcall aic94xx_init+0x0/0x12d returned 0 after 10762 usecs calling pm8001_init+0x0/0x9a @ 1 initcall pm8001_init+0x0/0x9a returned 0 after 58 usecs calling ips_module_init+0x0/0x2f3 @ 1 initcall ips_module_init+0x0/0x2f3 returned -19 after 65 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 scsi: Detection failed (no card) initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 7465 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 3 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 1 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 NCR53c406a: no available ports found initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 6450 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 sym53c416.c: Version 1.0.0-ac initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 5277 usecs calling qla1280_init+0x0/0x16 @ 1 initcall qla1280_init+0x0/0x16 returned 0 after 30 usecs calling qla2x00_module_init+0x0/0x242 @ 1 qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k. initcall qla2x00_module_init+0x0/0x242 returned 0 after 13430 usecs calling tcm_qla2xxx_init+0x0/0x29d @ 1 initcall tcm_qla2xxx_init+0x0/0x29d returned 0 after 94 usecs calling qla4xxx_module_init+0x0/0xcc @ 1 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver initcall qla4xxx_module_init+0x0/0xcc returned 0 after 10868 usecs calling lpfc_init+0x0/0xf0 @ 1 Emulex LightPulse Fibre Channel SCSI driver 8.3.42 Copyright(c) 2004-2013 Emulex. All rights reserved. initcall lpfc_init+0x0/0xf0 returned 0 after 18119 usecs calling bfad_init+0x0/0xab @ 1 Brocade BFA FC/FCOE SCSI driver - version: 3.2.21.1 initcall bfad_init+0x0/0xab returned 0 after 9048 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 2 usecs calling dmx3191d_init+0x0/0x16 @ 1 initcall dmx3191d_init+0x0/0x16 returned 0 after 38 usecs calling hpsa_init+0x0/0x16 @ 1 initcall hpsa_init+0x0/0x16 returned 0 after 43 usecs calling sym2_init+0x0/0xe0 @ 1 initcall sym2_init+0x0/0xe0 returned 0 after 39 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 Failed initialization of WD-7000 SCSI card! initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 28676 usecs calling init_this_scsi_driver+0x0/0xc6 @ 1 initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 30939 usecs calling dc395x_module_init+0x0/0x16 @ 1 initcall dc395x_module_init+0x0/0x16 returned 0 after 31 usecs calling dc390_module_init+0x0/0x8f @ 1 DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers initcall dc390_module_init+0x0/0x8f returned 0 after 22071 usecs calling megaraid_init+0x0/0xae @ 1 initcall megaraid_init+0x0/0xae returned 0 after 57 usecs calling megasas_init+0x0/0x18e @ 1 megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 initcall megasas_init+0x0/0x18e returned 0 after 9887 usecs calling _scsih_init+0x0/0x154 @ 1 mpt2sas version 16.100.00.00 loaded initcall _scsih_init+0x0/0x154 returned 0 after 6401 usecs calling _scsih_init+0x0/0x154 @ 1 mpt3sas version 02.100.00.00 loaded initcall _scsih_init+0x0/0x154 returned 0 after 6407 usecs calling ufshcd_pci_driver_init+0x0/0x16 @ 1 initcall ufshcd_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling ufshcd_pltfrm_driver_init+0x0/0x11 @ 1 initcall ufshcd_pltfrm_driver_init+0x0/0x11 returned 0 after 34 usecs calling gdth_init+0x0/0x7a5 @ 1 GDT-HA: Storage RAID Controller Driver. Version: 3.05 initcall gdth_init+0x0/0x7a5 returned 0 after 9365 usecs calling initio_init_driver+0x0/0x16 @ 1 initcall initio_init_driver+0x0/0x16 returned 0 after 31 usecs calling inia100_init+0x0/0x16 @ 1 initcall inia100_init+0x0/0x16 returned 0 after 30 usecs calling tw_init+0x0/0x2d @ 1 3ware Storage Controller device driver for Linux v1.26.02.003. initcall tw_init+0x0/0x2d returned 0 after 10888 usecs calling twa_init+0x0/0x2d @ 1 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. initcall twa_init+0x0/0x2d returned 0 after 11728 usecs calling imm_driver_init+0x0/0x26 @ 1 imm: Version 2.05 (for Linux 2.4.0) initcall imm_driver_init+0x0/0x26 returned 0 after 6646 usecs calling init_nsp32+0x0/0x3d @ 1 nsp32: loading... initcall init_nsp32+0x0/0x3d returned 0 after 3265 usecs calling ipr_init+0x0/0x3f @ 1 ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012) initcall ipr_init+0x0/0x3f returned 0 after 12748 usecs calling hptiop_module_init+0x0/0x35 @ 1 RocketRAID 3xxx/4xxx Controller driver v1.8 initcall hptiop_module_init+0x0/0x35 returned 0 after 7669 usecs calling stex_init+0x0/0x2d @ 1 stex: Promise SuperTrak EX Driver version: 4.6.0000.4 initcall stex_init+0x0/0x2d returned 0 after 9360 usecs calling libcxgbi_init_module+0x0/0x17a @ 1 Clocksource tsc unstable (delta = 2830721179 ns) libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. initcall libcxgbi_init_module+0x0/0x17a returned 0 after 23559 usecs calling cxgb4i_init_module+0x0/0x40 @ 1 Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4 iscsi: registered transport (cxgb4i) initcall cxgb4i_init_module+0x0/0x40 returned 0 after 13588 usecs calling beiscsi_module_init+0x0/0x75 @ 1 iscsi: registered transport (be2iscsi) In beiscsi_module_init, tt=b2bf7600 initcall beiscsi_module_init+0x0/0x75 returned 0 after 13100 usecs calling esas2r_init+0x0/0x287 @ 1 esas2r: driver will not be loaded because no ATTO esas2r devices were found initcall esas2r_init+0x0/0x287 returned -1 after 13052 usecs calling pmcraid_init+0x0/0x126 @ 1 initcall pmcraid_init+0x0/0x126 returned 0 after 87 usecs calling init+0x0/0xc4 @ 1 initcall init+0x0/0xc4 returned 0 after 411 usecs calling pvscsi_init+0x0/0x35 @ 1 VMware PVSCSI driver - version 1.0.2.0-k initcall pvscsi_init+0x0/0x35 returned 0 after 7164 usecs calling init_sd+0x0/0x14b @ 1 initcall init_sd+0x0/0x14b returned 0 after 83 usecs calling init_sg+0x0/0xaf @ 1 initcall init_sg+0x0/0xaf returned 0 after 40 usecs calling init_ch_module+0x0/0xab @ 1 SCSI Media Changer driver v0.25 initcall init_ch_module+0x0/0xab returned 0 after 5817 usecs calling osd_uld_init+0x0/0xbe @ 1 osd: LOADED open-osd 0.2.1 initcall osd_uld_init+0x0/0xbe returned 0 after 4758 usecs calling ahci_pci_driver_init+0x0/0x16 @ 1 initcall ahci_pci_driver_init+0x0/0x16 returned 0 after 54 usecs calling ahci_driver_init+0x0/0x11 @ 1 initcall ahci_driver_init+0x0/0x11 returned 0 after 27 usecs calling sil24_pci_driver_init+0x0/0x16 @ 1 initcall sil24_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling ahci_highbank_driver_init+0x0/0x11 @ 1 initcall ahci_highbank_driver_init+0x0/0x11 returned 0 after 39 usecs calling imx_ahci_driver_init+0x0/0x11 @ 1 initcall imx_ahci_driver_init+0x0/0x11 returned 0 after 24 usecs calling qs_ata_pci_driver_init+0x0/0x16 @ 1 initcall qs_ata_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling piix_init+0x0/0x24 @ 1 initcall piix_init+0x0/0x24 returned 0 after 40 usecs calling mv_init+0x0/0x3c @ 1 initcall mv_init+0x0/0x3c returned 0 after 66 usecs calling nv_pci_driver_init+0x0/0x16 @ 1 sata_nv 0000:00:07.0: version 3.5 sata_nv 0000:00:07.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 11 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 11 sata_nv 0000:00:08.0: setting latency timer to 64 calling 2_async_port_probe+0x0/0x49 @ 6 calling 3_async_port_probe+0x0/0x49 @ 91 async_waiting @ 91 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 5 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 5 initcall nv_pci_driver_init+0x0/0x16 returned 0 after 97585 usecs calling pdc_ata_pci_driver_init+0x0/0x16 @ 1 initcall pdc_ata_pci_driver_init+0x0/0x16 returned 0 after 41 usecs calling sis_pci_driver_init+0x0/0x16 @ 1 initcall sis_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling k2_sata_pci_driver_init+0x0/0x16 @ 1 initcall k2_sata_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling uli_pci_driver_init+0x0/0x16 @ 1 initcall uli_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling svia_pci_driver_init+0x0/0x16 @ 1 initcall svia_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling vsc_sata_pci_driver_init+0x0/0x16 @ 1 initcall vsc_sata_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling ali_init+0x0/0x40 @ 1 initcall ali_init+0x0/0x40 returned 0 after 36 usecs calling amd_pci_driver_init+0x0/0x16 @ 1 pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 initcall amd_pci_driver_init+0x0/0x16 returned 0 after 44162 usecs calling atp867x_driver_init+0x0/0x16 @ 1 initcall atp867x_driver_init+0x0/0x16 returned 0 after 40 usecs calling cmd64x_pci_driver_init+0x0/0x16 @ 1 initcall cmd64x_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling cs5535_pci_driver_init+0x0/0x16 @ 1 initcall cs5535_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling cs5536_pci_driver_init+0x0/0x16 @ 1 initcall cs5536_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling efar_pci_driver_init+0x0/0x16 @ 1 initcall efar_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling hpt36x_pci_driver_init+0x0/0x16 @ 1 initcall hpt36x_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling hpt37x_pci_driver_init+0x0/0x16 @ 1 initcall hpt37x_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling hpt3x2n_pci_driver_init+0x0/0x16 @ 1 initcall hpt3x2n_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling it821x_pci_driver_init+0x0/0x16 @ 1 initcall it821x_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling jmicron_pci_driver_init+0x0/0x16 @ 1 initcall jmicron_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling marvell_pci_driver_init+0x0/0x16 @ 1 initcall marvell_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling ninja32_pci_driver_init+0x0/0x16 @ 1 initcall ninja32_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling oldpiix_pci_driver_init+0x0/0x16 @ 1 initcall oldpiix_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling optidma_pci_driver_init+0x0/0x16 @ 1 initcall optidma_pci_driver_init+0x0/0x16 returned 0 after 40 usecs calling pdc2027x_pci_driver_init+0x0/0x16 @ 1 initcall pdc2027x_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling pdc202xx_pci_driver_init+0x0/0x16 @ 1 initcall pdc202xx_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling radisys_pci_driver_init+0x0/0x16 @ 1 initcall radisys_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling rdc_pci_driver_init+0x0/0x16 @ 1 initcall rdc_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling sc1200_pci_driver_init+0x0/0x16 @ 1 initcall sc1200_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling sch_pci_driver_init+0x0/0x16 @ 1 initcall sch_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling serverworks_pci_driver_init+0x0/0x16 @ 1 initcall serverworks_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling sis_pci_driver_init+0x0/0x16 @ 1 initcall sis_pci_driver_init+0x0/0x16 returned 0 after 40 usecs calling ata_tosh_pci_driver_init+0x0/0x16 @ 1 initcall ata_tosh_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling triflex_pci_driver_init+0x0/0x16 @ 1 initcall triflex_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling via_pci_driver_init+0x0/0x16 @ 1 initcall via_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling cmd640_pci_driver_init+0x0/0x16 @ 1 initcall cmd640_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling isapnp_init+0x0/0xf @ 1 initcall isapnp_init+0x0/0xf returned 0 after 29 usecs calling mpiix_pci_driver_init+0x0/0x16 @ 1 initcall mpiix_pci_driver_init+0x0/0x16 returned 0 after 31 usecs calling ns87410_pci_driver_init+0x0/0x16 @ 1 initcall ns87410_pci_driver_init+0x0/0x16 returned 0 after 32 usecs calling opti_pci_driver_init+0x0/0x16 @ 1 initcall opti_pci_driver_init+0x0/0x16 returned 0 after 33 usecs calling pata_platform_driver_init+0x0/0x11 @ 1 initcall pata_platform_driver_init+0x0/0x11 returned 0 after 34 usecs calling pata_of_platform_driver_init+0x0/0x11 @ 1 initcall pata_of_platform_driver_init+0x0/0x11 returned 0 after 25 usecs calling rz1000_pci_driver_init+0x0/0x16 @ 1 initcall rz1000_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling ata_generic_pci_driver_init+0x0/0x16 @ 1 initcall ata_generic_pci_driver_init+0x0/0x16 returned 0 after 34 usecs calling legacy_init+0x0/0x874 @ 1 initcall legacy_init+0x0/0x874 returned -19 after 14 usecs calling target_core_init_configfs+0x0/0x394 @ 1 calling 4_async_port_probe+0x0/0x49 @ 93 calling 5_async_port_probe+0x0/0x49 @ 109 async_waiting @ 109 calling 6_async_port_probe+0x0/0x49 @ 112 calling 7_async_port_probe+0x0/0x49 @ 113 async_waiting @ 113 Switched to clocksource pit Rounding down aligned max_sectors from 4294967295 to 4294967288 initcall target_core_init_configfs+0x0/0x394 returned 0 after 39537 usecs calling iblock_module_init+0x0/0xf @ 1 initcall iblock_module_init+0x0/0xf returned 0 after 4 usecs calling fileio_module_init+0x0/0xf @ 1 initcall fileio_module_init+0x0/0xf returned 0 after 4 usecs calling tcm_loop_fabric_init+0x0/0x38f @ 1 initcall tcm_loop_fabric_init+0x0/0x38f returned 0 after 132 usecs calling iscsi_target_init_module+0x0/0x21e @ 1 initcall iscsi_target_init_module+0x0/0x21e returned 0 after 2380 usecs calling hsc_init+0x0/0x66 @ 1 HSI/SSI char device loaded initcall hsc_init+0x0/0x66 returned 0 after 1828 usecs calling bonding_init+0x0/0x97 @ 1 bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) initcall bonding_init+0x0/0x97 returned 0 after 1577 usecs calling eql_init_module+0x0/0x6a @ 1 eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) initcall eql_init_module+0x0/0x6a returned 0 after 1500 usecs calling macvlan_init_module+0x0/0x31 @ 1 initcall macvlan_init_module+0x0/0x31 returned 0 after 4 usecs calling macvtap_init+0x0/0xc7 @ 1 initcall macvtap_init+0x0/0xc7 returned 0 after 33 usecs calling net_olddevs_init+0x0/0x50 @ 1 LocalTalk card not found; 220 = ff, 240 = ff. initcall net_olddevs_init+0x0/0x50 returned 0 after 1451 usecs calling cicada_init+0x0/0x14 @ 1 initcall cicada_init+0x0/0x14 returned 0 after 49 usecs calling qs6612_init+0x0/0xf @ 1 initcall qs6612_init+0x0/0xf returned 0 after 24 usecs calling smsc_init+0x0/0x14 @ 1 initcall smsc_init+0x0/0x14 returned 0 after 119 usecs calling broadcom_init+0x0/0x14 @ 1 initcall broadcom_init+0x0/0x14 returned 0 after 253 usecs calling bcm87xx_init+0x0/0x14 @ 1 initcall bcm87xx_init+0x0/0x14 returned 0 after 46 usecs calling icplus_init+0x0/0x14 @ 1 initcall icplus_init+0x0/0x14 returned 0 after 152 usecs calling et1011c_init+0x0/0xf @ 1 initcall et1011c_init+0x0/0xf returned 0 after 23 usecs calling ns_init+0x0/0xf @ 1 initcall ns_init+0x0/0xf returned 0 after 24 usecs calling ste10Xp_init+0x0/0x14 @ 1 initcall ste10Xp_init+0x0/0x14 returned 0 after 53 usecs calling ksphy_init+0x0/0x14 @ 1 initcall ksphy_init+0x0/0x14 returned 0 after 261 usecs calling atheros_init+0x0/0x14 @ 1 initcall atheros_init+0x0/0x14 returned 0 after 72 usecs calling mdio_mux_gpio_driver_init+0x0/0x11 @ 1 initcall mdio_mux_gpio_driver_init+0x0/0x11 returned 0 after 40 usecs calling mdio_mux_mmioreg_driver_init+0x0/0x11 @ 1 initcall mdio_mux_mmioreg_driver_init+0x0/0x11 returned 0 after 29 usecs calling team_module_init+0x0/0x80 @ 1 initcall team_module_init+0x0/0x80 returned 0 after 54 usecs calling bc_init_module+0x0/0xf @ 1 initcall bc_init_module+0x0/0xf returned 0 after 22 usecs calling rr_init_module+0x0/0xf @ 1 initcall rr_init_module+0x0/0xf returned 0 after 4 usecs calling rnd_init_module+0x0/0xf @ 1 initcall rnd_init_module+0x0/0xf returned 0 after 4 usecs calling ab_init_module+0x0/0xf @ 1 initcall ab_init_module+0x0/0xf returned 0 after 4 usecs calling lb_init_module+0x0/0xf @ 1 initcall lb_init_module+0x0/0xf returned 0 after 4 usecs calling virtio_net_driver_init+0x0/0xf @ 1 initcall virtio_net_driver_init+0x0/0xf returned 0 after 27 usecs calling nlmon_register+0x0/0xf @ 1 initcall nlmon_register+0x0/0xf returned 0 after 4 usecs calling ipddp_init_module+0x0/0xed @ 1 ipddp.c:v0.01 8/28/97 Bradford W. Johnson ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson initcall ipddp_init_module+0x0/0xed returned 0 after 3465 usecs calling can_dev_init+0x0/0x2c @ 1 CAN device driver interface initcall can_dev_init+0x0/0x2c returned 0 after 1019 usecs calling esd_usb2_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver esd_usb2 initcall esd_usb2_driver_init+0x0/0x16 returned 0 after 839 usecs calling kvaser_usb_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver kvaser_usb initcall kvaser_usb_driver_init+0x0/0x16 returned 0 after 1178 usecs calling usb_8dev_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usb_8dev initcall usb_8dev_driver_init+0x0/0x16 returned 0 after 1813 usecs calling softing_driver_init+0x0/0x11 @ 1 initcall softing_driver_init+0x0/0x11 returned 0 after 29 usecs calling sja1000_init+0x0/0x1e @ 1 sja1000 CAN netdevice driver initcall sja1000_init+0x0/0x1e returned 0 after 1189 usecs calling sja1000_isa_init+0x0/0x14f @ 1 sja1000_isa: insufficient parameters supplied initcall sja1000_isa_init+0x0/0x14f returned -22 after 1137 usecs calling sp_driver_init+0x0/0x11 @ 1 initcall sp_driver_init+0x0/0x11 returned 0 after 30 usecs calling ems_pcmcia_driver_init+0x0/0xf @ 1 initcall ems_pcmcia_driver_init+0x0/0xf returned 0 after 36 usecs calling ems_pci_driver_init+0x0/0x16 @ 1 initcall ems_pci_driver_init+0x0/0x16 returned 0 after 53 usecs calling pcan_driver_init+0x0/0xf @ 1 initcall pcan_driver_init+0x0/0xf returned 0 after 26 usecs calling peak_pci_driver_init+0x0/0x16 @ 1 initcall peak_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling plx_pci_driver_init+0x0/0x16 @ 1 initcall plx_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling tscan1_init+0x0/0x14 @ 1 initcall tscan1_init+0x0/0x14 returned 0 after 263 usecs calling cc770_init+0x0/0x2b @ 1 cc770: CAN netdevice driver initcall cc770_init+0x0/0x2b returned 0 after 1033 usecs calling cc770_isa_init+0x0/0x130 @ 1 cc770_isa: insufficient parameters supplied initcall cc770_isa_init+0x0/0x130 returned -22 after 798 usecs calling cc770_platform_driver_init+0x0/0x11 @ 1 initcall cc770_platform_driver_init+0x0/0x11 returned 0 after 45 usecs calling pch_can_pci_driver_init+0x0/0x16 @ 1 initcall pch_can_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling grcan_driver_init+0x0/0x11 @ 1 initcall grcan_driver_init+0x0/0x11 returned 0 after 29 usecs calling tc589_driver_init+0x0/0xf @ 1 initcall tc589_driver_init+0x0/0xf returned 0 after 27 usecs calling vortex_init+0x0/0x9f @ 1 initcall vortex_init+0x0/0x9f returned 0 after 54 usecs calling typhoon_init+0x0/0x16 @ 1 initcall typhoon_init+0x0/0x16 returned 0 after 36 usecs calling ne_init+0x0/0x21 @ 1 initcall ne_init+0x0/0x21 returned -19 after 361 usecs calling NS8390p_init_module+0x0/0x7 @ 1 initcall NS8390p_init_module+0x0/0x7 returned 0 after 4 usecs calling ne2k_pci_init+0x0/0x16 @ 1 initcall ne2k_pci_init+0x0/0x16 returned 0 after 37 usecs calling axnet_cs_driver_init+0x0/0xf @ 1 initcall axnet_cs_driver_init+0x0/0xf returned 0 after 31 usecs calling pcnet_driver_init+0x0/0xf @ 1 initcall pcnet_driver_init+0x0/0xf returned 0 after 61 usecs calling amd8111e_driver_init+0x0/0x16 @ 1 initcall amd8111e_driver_init+0x0/0x16 returned 0 after 36 usecs calling nmclan_cs_driver_init+0x0/0xf @ 1 initcall nmclan_cs_driver_init+0x0/0xf returned 0 after 27 usecs calling pcnet32_init_module+0x0/0x114 @ 1 pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de initcall pcnet32_init_module+0x0/0x114 returned 0 after 1118 usecs calling b44_init+0x0/0x3f @ 1 initcall b44_init+0x0/0x3f returned 0 after 57 usecs calling bnx2_pci_driver_init+0x0/0x16 @ 1 initcall bnx2_pci_driver_init+0x0/0x16 returned 0 after 37 usecs calling cnic_init+0x0/0x8b @ 1 cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013) initcall cnic_init+0x0/0x8b returned 0 after 1371 usecs calling tg3_driver_init+0x0/0x16 @ 1 initcall tg3_driver_init+0x0/0x16 returned 0 after 54 usecs calling cxgb_pci_driver_init+0x0/0x16 @ 1 initcall cxgb_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling cxgb4_init_module+0x0/0xa9 @ 1 initcall cxgb4_init_module+0x0/0xa9 returned 0 after 136 usecs calling dnet_driver_init+0x0/0x11 @ 1 initcall dnet_driver_init+0x0/0x11 returned 0 after 31 usecs calling dmfe_init_module+0x0/0xea @ 1 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) initcall dmfe_init_module+0x0/0xea returned 0 after 1758 usecs calling w840_init+0x0/0x23 @ 1 v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html initcall w840_init+0x0/0x23 returned 0 after 1263 usecs calling de_init+0x0/0x16 @ 1 initcall de_init+0x0/0x16 returned 0 after 36 usecs calling tulip_init+0x0/0x2a @ 1 initcall tulip_init+0x0/0x2a returned 0 after 45 usecs calling de4x5_module_init+0x0/0x16 @ 1 initcall de4x5_module_init+0x0/0x16 returned 0 after 36 usecs calling uli526x_init_module+0x0/0x9e @ 1 uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) initcall uli526x_init_module+0x0/0x9e returned 0 after 1119 usecs calling s2io_starter+0x0/0x16 @ 1 initcall s2io_starter+0x0/0x16 returned 0 after 36 usecs calling jme_init_module+0x0/0x2d @ 1 jme: JMicron JMC2XX ethernet driver version 1.0.8 initcall jme_init_module+0x0/0x2d returned 0 after 870 usecs calling mlx4_init+0x0/0x12e @ 1 initcall mlx4_init+0x0/0x12e returned 0 after 99 usecs calling mlx4_en_init+0x0/0xf @ 1 initcall mlx4_en_init+0x0/0xf returned 0 after 16 usecs calling init+0x0/0x5d @ 1 initcall init+0x0/0x5d returned 0 after 83 usecs calling ks8851_platform_driver_init+0x0/0x11 @ 1 initcall ks8851_platform_driver_init+0x0/0x11 returned 0 after 36 usecs calling pci_device_driver_init+0x0/0x16 @ 1 initcall pci_device_driver_init+0x0/0x16 returned 0 after 38 usecs calling fealnx_init+0x0/0x16 @ 1 initcall fealnx_init+0x0/0x16 returned 0 after 36 usecs calling natsemi_init_mod+0x0/0x16 @ 1 initcall natsemi_init_mod+0x0/0x16 returned 0 after 36 usecs calling forcedeth_pci_driver_init+0x0/0x16 @ 1 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. forcedeth 0000:00:0a.0: setting latency timer to 64 ata5.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 ata5.00: 488397168 sectors, multi 1: LBA48 ata5: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0 ata5.00: configured for UDMA/100 async_waiting @ 112 ata1: SATA link down (SStatus 0 SControl 300) async_waiting @ 6 async_continuing @ 6 after 4 usec initcall 2_async_port_probe+0x0/0x49 returned 0 after 1220598 usecs async_continuing @ 91 after 1210867 usec ata3: SATA link down (SStatus 0 SControl 300) async_waiting @ 93 ata2: SATA link down (SStatus 0 SControl 300) async_waiting @ 91 async_continuing @ 91 after 4 usec initcall 3_async_port_probe+0x0/0x49 returned 0 after 1514369 usecs async_continuing @ 93 after 268746 usec initcall 4_async_port_probe+0x0/0x49 returned 0 after 591892 usecs async_continuing @ 109 after 581639 usec forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 initcall forcedeth_pci_driver_init+0x0/0x16 returned 0 after 514388 usecs calling ethoc_driver_init+0x0/0x11 @ 1 initcall ethoc_driver_init+0x0/0x11 returned 0 after 42 usecs calling yellowfin_init+0x0/0x16 @ 1 initcall yellowfin_init+0x0/0x16 returned 0 after 45 usecs calling sh_eth_driver_init+0x0/0x11 @ 1 initcall sh_eth_driver_init+0x0/0x11 returned 0 after 30 usecs calling epic_init+0x0/0x16 @ 1 initcall epic_init+0x0/0x16 returned 0 after 44 usecs calling smsc9420_init_module+0x0/0x36 @ 1 initcall smsc9420_init_module+0x0/0x36 returned 0 after 36 usecs calling gem_driver_init+0x0/0x16 @ 1 initcall gem_driver_init+0x0/0x16 returned 0 after 36 usecs calling cas_init+0x0/0x36 @ 1 initcall cas_init+0x0/0x36 returned 0 after 37 usecs calling niu_init+0x0/0x36 @ 1 initcall niu_init+0x0/0x36 returned 0 after 45 usecs calling velocity_init_module+0x0/0x48 @ 1 initcall velocity_init_module+0x0/0x48 returned 0 after 62 usecs calling xirc2ps_cs_driver_init+0x0/0xf @ 1 initcall xirc2ps_cs_driver_init+0x0/0xf returned 0 after 39 usecs calling skfddi_pci_driver_init+0x0/0x16 @ 1 initcall skfddi_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling dmascc_init+0x0/0x89c @ 1 dmascc: autoprobing (dangerous) dmascc: no adapters found initcall dmascc_init+0x0/0x89c returned -5 after 52931 usecs calling scc_init_driver+0x0/0xa5 @ 1 AX.25: Z8530 SCC driver version 3.0.dl1bke initcall scc_init_driver+0x0/0xa5 returned 0 after 1870 usecs calling mkiss_init_driver+0x0/0x3f @ 1 mkiss: AX.25 Multikiss, Hans Albas PE1AYX initcall mkiss_init_driver+0x0/0x3f returned 0 after 461 usecs calling sixpack_init_driver+0x0/0x3f @ 1 AX.25: 6pack driver, Revision: 0.3.0 initcall sixpack_init_driver+0x0/0x3f returned 0 after 1567 usecs calling yam_init_driver+0x0/0x120 @ 1 YAM driver version 0.8 by F1OAT/F6FBB initcall yam_init_driver+0x0/0x120 returned 0 after 1737 usecs calling bpq_init_driver+0x0/0x65 @ 1 AX.25: bpqether driver version 004 initcall bpq_init_driver+0x0/0x65 returned 0 after 252 usecs calling init_baycomserfdx+0x0/0x100 @ 1 baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_ser_fdx: version 0.10 baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_ser_fdx: version 0.10 initcall init_baycomserfdx+0x0/0x100 returned 0 after 2460 usecs calling hdlcdrv_init_driver+0x0/0x20 @ 1 hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA hdlcdrv: version 0.8 initcall hdlcdrv_init_driver+0x0/0x20 returned 0 after 1618 usecs calling init_baycomserhdx+0x0/0xf3 @ 1 baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_ser_hdx: version 0.10 baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_ser_hdx: version 0.10 initcall init_baycomserhdx+0x0/0xf3 returned 0 after 1408 usecs calling init_baycompar+0x0/0xe5 @ 1 baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_par: version 0.9 baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA baycom_par: version 0.9 initcall init_baycompar+0x0/0xe5 returned 0 after 2824 usecs calling init_baycomepp+0x0/0x111 @ 1 baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA baycom_epp: version 0.7 baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA baycom_epp: version 0.7 initcall init_baycomepp+0x0/0x111 returned 0 after 1838 usecs calling nsc_ircc_init+0x0/0x1d8 @ 1 initcall nsc_ircc_init+0x0/0x1d8 returned -19 after 135 usecs calling donauboe_init+0x0/0x16 @ 1 initcall donauboe_init+0x0/0x16 returned 0 after 52 usecs calling smsc_ircc_init+0x0/0x4f9 @ 1 initcall smsc_ircc_init+0x0/0x4f9 returned -19 after 162 usecs calling vlsi_mod_init+0x0/0x110 @ 1 initcall vlsi_mod_init+0x0/0x110 returned 0 after 53 usecs calling via_ircc_init+0x0/0x1c @ 1 initcall via_ircc_init+0x0/0x1c returned 0 after 37 usecs calling mcs_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver mcs7780 initcall mcs_driver_init+0x0/0x16 returned 0 after 671 usecs calling irtty_sir_init+0x0/0x3c @ 1 initcall irtty_sir_init+0x0/0x3c returned 0 after 4 usecs calling sir_wq_init+0x0/0x49 @ 1 initcall sir_wq_init+0x0/0x49 returned 0 after 94 usecs calling irda_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver kingsun-sir initcall irda_driver_init+0x0/0x16 returned 0 after 371 usecs calling slip_init+0x0/0xa8 @ 1 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. initcall slip_init+0x0/0xa8 returned 0 after 2324 usecs calling init_x25_asy+0x0/0x6c @ 1 x25_asy: X.25 async: version 0.00 ALPHA (dynamic channels, max=256) initcall init_x25_asy+0x0/0x6c returned 0 after 964 usecs calling lapbeth_init_driver+0x0/0x28 @ 1 LAPB Ethernet driver version 0.02 initcall lapbeth_init_driver+0x0/0x28 returned 0 after 1059 usecs calling ipw2100_init+0x0/0x78 @ 1 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation initcall ipw2100_init+0x0/0x78 returned 0 after 2832 usecs calling ipw_init+0x0/0x73 @ 1 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmq ipw2200: Copyright(c) 2003-2006 Intel Corporation initcall ipw_init+0x0/0x73 returned 0 after 1661 usecs calling libipw_init+0x0/0x20 @ 1 libipw: 802.11 data/management/control stack, git-1.1.13 libipw: Copyright (C) 2004-2005 Intel Corporation initcall libipw_init+0x0/0x20 returned 0 after 1573 usecs calling init_orinoco+0x0/0x1e @ 1 orinoco 0.15 (David Gibson , Pavel Roskin , et al) initcall init_orinoco+0x0/0x1e returned 0 after 981 usecs calling orinoco_driver_init+0x0/0xf @ 1 initcall orinoco_driver_init+0x0/0xf returned 0 after 41 usecs calling orinoco_plx_init+0x0/0x2d @ 1 orinoco_plx 0.15 (Pavel Roskin , David Gibson , Daniel Barlow ) initcall orinoco_plx_init+0x0/0x2d returned 0 after 1052 usecs calling orinoco_driver_init+0x0/0xf @ 1 initcall orinoco_driver_init+0x0/0xf returned 0 after 27 usecs calling airo_driver_init+0x0/0xf @ 1 initcall airo_driver_init+0x0/0xf returned 0 after 26 usecs calling airo_init_module+0x0/0x113 @ 1 airo(): Probing for PCI adapters airo(): Finished probing for PCI adapters initcall airo_init_module+0x0/0x113 returned 0 after 2328 usecs calling prism54_module_init+0x0/0x35 @ 1 Loaded prism54 driver, version 1.2 initcall prism54_module_init+0x0/0x35 returned 0 after 1268 usecs calling hostap_init+0x0/0x40 @ 1 initcall hostap_init+0x0/0x40 returned 0 after 15 usecs calling hostap_driver_init+0x0/0xf @ 1 initcall hostap_driver_init+0x0/0xf returned 0 after 32 usecs calling prism2_pci_driver_init+0x0/0x16 @ 1 initcall prism2_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling usb_init+0x0/0xf3 @ 1 zd1211rw usb_init() usbcore: registered new interface driver zd1211rw zd1211rw initialized initcall usb_init+0x0/0xf3 returned 0 after 2291 usecs calling rtl8180_driver_init+0x0/0x16 @ 1 initcall rtl8180_driver_init+0x0/0x16 returned 0 after 37 usecs calling rtl_core_module_init+0x0/0x45 @ 1 initcall rtl_core_module_init+0x0/0x45 returned 0 after 18 usecs calling rtl8192cu_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver rtl8192cu initcall rtl8192cu_driver_init+0x0/0x16 returned 0 after 1009 usecs calling rtl92se_driver_init+0x0/0x16 @ 1 initcall rtl92se_driver_init+0x0/0x16 returned 0 after 45 usecs calling rtl8723ae_driver_init+0x0/0x16 @ 1 initcall rtl8723ae_driver_init+0x0/0x16 returned 0 after 36 usecs calling rtl88ee_driver_init+0x0/0x16 @ 1 initcall rtl88ee_driver_init+0x0/0x16 returned 0 after 43 usecs calling wl3501_driver_init+0x0/0xf @ 1 initcall wl3501_driver_init+0x0/0xf returned 0 after 28 usecs calling lbtf_init_module+0x0/0xde @ 1 initcall lbtf_init_module+0x0/0xde returned 0 after 58 usecs calling adm8211_driver_init+0x0/0x16 @ 1 initcall adm8211_driver_init+0x0/0x16 returned 0 after 84 usecs calling mwl8k_driver_init+0x0/0x16 @ 1 initcall mwl8k_driver_init+0x0/0x16 returned 0 after 51 usecs calling iwl_drv_init+0x0/0x7b @ 1 Intel(R) Wireless WiFi driver for Linux, in-tree: Copyright(c) 2003-2013 Intel Corporation initcall iwl_drv_init+0x0/0x7b returned 0 after 2177 usecs calling iwl_init+0x0/0x55 @ 1 initcall iwl_init+0x0/0x55 returned 0 after 20 usecs calling iwl_mvm_init+0x0/0x55 @ 1 initcall iwl_mvm_init+0x0/0x55 returned 0 after 4 usecs calling il4965_init+0x0/0x6b @ 1 iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: iwl4965: Copyright(c) 2003-2011 Intel Corporation initcall il4965_init+0x0/0x6b returned 0 after 2136 usecs calling il3945_init+0x0/0x6b @ 1 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s iwl3945: Copyright(c) 2003-2011 Intel Corporation initcall il3945_init+0x0/0x6b returned 0 after 2468 usecs calling rt2500pci_driver_init+0x0/0x16 @ 1 initcall rt2500pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling rt61pci_driver_init+0x0/0x16 @ 1 initcall rt61pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling rt2800pci_init+0x0/0x16 @ 1 initcall rt2800pci_init+0x0/0x16 returned 0 after 39 usecs calling rt2800usb_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver rt2800usb initcall rt2800usb_driver_init+0x0/0x16 returned 0 after 1009 usecs calling ath5k_pci_driver_init+0x0/0x16 @ 1 initcall ath5k_pci_driver_init+0x0/0x16 returned 0 after 44 usecs calling ath9k_init+0x0/0x39 @ 1 initcall ath9k_init+0x0/0x39 returned 0 after 72 usecs calling ath9k_init+0x0/0x7 @ 1 initcall ath9k_init+0x0/0x7 returned 0 after 4 usecs calling ath9k_cmn_init+0x0/0x7 @ 1 initcall ath9k_cmn_init+0x0/0x7 returned 0 after 4 usecs calling ath9k_htc_init+0x0/0x24 @ 1 usbcore: registered new interface driver ath9k_htc initcall ath9k_htc_init+0x0/0x24 returned 0 after 1009 usecs calling carl9170_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver carl9170 initcall carl9170_driver_init+0x0/0x16 returned 0 after 1816 usecs calling ath6kl_sdio_init+0x0/0x2e @ 1 initcall ath6kl_sdio_init+0x0/0x2e returned 0 after 24 usecs calling ath6kl_usb_init+0x0/0x36 @ 1 usbcore: registered new interface driver ath6kl_usb initcall ath6kl_usb_init+0x0/0x36 returned 0 after 1178 usecs calling wil6210_driver_init+0x0/0x16 @ 1 initcall wil6210_driver_init+0x0/0x16 returned 0 after 43 usecs calling wl12xx_driver_init+0x0/0x11 @ 1 initcall wl12xx_driver_init+0x0/0x11 returned 0 after 29 usecs calling brcmfmac_module_init+0x0/0x26 @ 1 initcall brcmfmac_module_init+0x0/0x26 returned 0 after 49 usecs calling cw1200_sdio_init+0x0/0x105 @ 1 initcall cw1200_sdio_init+0x0/0x105 returned 0 after 23 usecs calling vmxnet3_init_module+0x0/0x35 @ 1 VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI initcall vmxnet3_init_module+0x0/0x35 returned 0 after 1420 usecs calling catc_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver catc initcall catc_driver_init+0x0/0x16 returned 0 after 1138 usecs calling pegasus_init+0x0/0x13e @ 1 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus initcall pegasus_init+0x0/0x13e returned 0 after 1795 usecs calling rtl8150_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver rtl8150 initcall rtl8150_driver_init+0x0/0x16 returned 0 after 670 usecs calling rtl8152_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver r8152 initcall rtl8152_driver_init+0x0/0x16 returned 0 after 1307 usecs calling asix_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver asix initcall asix_driver_init+0x0/0x16 returned 0 after 1139 usecs calling ax88179_178a_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ax88179_178a initcall ax88179_178a_driver_init+0x0/0x16 returned 0 after 540 usecs calling cdc_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_ether initcall cdc_driver_init+0x0/0x16 returned 0 after 1009 usecs calling r815x_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver r815x initcall r815x_driver_init+0x0/0x16 returned 0 after 330 usecs calling eem_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_eem initcall eem_driver_init+0x0/0x16 returned 0 after 671 usecs calling dm9601_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver dm9601 initcall dm9601_driver_init+0x0/0x16 returned 0 after 501 usecs calling smsc75xx_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver smsc75xx initcall smsc75xx_driver_init+0x0/0x16 returned 0 after 1816 usecs calling smsc95xx_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver smsc95xx initcall smsc95xx_driver_init+0x0/0x16 returned 0 after 839 usecs calling gl620a_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver gl620a initcall gl620a_driver_init+0x0/0x16 returned 0 after 1478 usecs calling net1080_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver net1080 initcall net1080_driver_init+0x0/0x16 returned 0 after 671 usecs calling rndis_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver rndis_host initcall rndis_driver_init+0x0/0x16 returned 0 after 201 usecs calling cdc_subset_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_subset initcall cdc_subset_driver_init+0x0/0x16 returned 0 after 1178 usecs calling zaurus_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver zaurus initcall zaurus_driver_init+0x0/0x16 returned 0 after 500 usecs calling usbnet_init+0x0/0x26 @ 1 initcall usbnet_init+0x0/0x26 returned 0 after 11 usecs calling int51x1_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver int51x1 initcall int51x1_driver_init+0x0/0x16 returned 0 after 1646 usecs calling kalmia_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver kalmia initcall kalmia_driver_init+0x0/0x16 returned 0 after 500 usecs calling ipheth_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ipheth initcall ipheth_driver_init+0x0/0x16 returned 0 after 500 usecs calling cx82310_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cx82310_eth initcall cx82310_driver_init+0x0/0x16 returned 0 after 1347 usecs calling cdc_ncm_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_ncm initcall cdc_ncm_driver_init+0x0/0x16 returned 0 after 670 usecs calling qmi_wwan_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver qmi_wwan initcall qmi_wwan_driver_init+0x0/0x16 returned 0 after 840 usecs calling cdc_mbim_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_mbim initcall cdc_mbim_driver_init+0x0/0x16 returned 0 after 838 usecs calling zatm_init_module+0x0/0x16 @ 1 initcall zatm_init_module+0x0/0x16 returned 0 after 51 usecs calling uPD98402_module_init+0x0/0x7 @ 1 initcall uPD98402_module_init+0x0/0x7 returned 0 after 4 usecs calling nicstar_init+0x0/0x67 @ 1 initcall nicstar_init+0x0/0x67 returned 0 after 36 usecs calling hrz_module_init+0x0/0xc6 @ 1 Madge ATM Horizon [Ultra] driver version 1.2.1 initcall hrz_module_init+0x0/0xc6 returned 0 after 1338 usecs calling fore200e_module_init+0x0/0x23 @ 1 fore200e: FORE Systems 200E-series ATM driver - version 0.3e initcall fore200e_module_init+0x0/0x23 returned 0 after 788 usecs calling eni_init+0x0/0x16 @ 1 initcall eni_init+0x0/0x16 returned 0 after 36 usecs calling idt77252_init+0x0/0x35 @ 1 idt77252_init: at b2d5a532 initcall idt77252_init+0x0/0x35 returned 0 after 1873 usecs calling solos_pci_init+0x0/0x2d @ 1 Solos PCI Driver Version 1.04 initcall solos_pci_init+0x0/0x2d returned 0 after 1393 usecs calling adummy_init+0x0/0xe6 @ 1 adummy: version 1.0 initcall adummy_init+0x0/0xe6 returned 0 after 749 usecs calling he_driver_init+0x0/0x16 @ 1 initcall he_driver_init+0x0/0x16 returned 0 after 37 usecs calling lynx_pci_driver_init+0x0/0x16 @ 1 initcall lynx_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling uio_init+0x0/0xd6 @ 1 initcall uio_init+0x0/0xd6 returned 0 after 32 usecs calling uio_pdrv_genirq_init+0x0/0x11 @ 1 initcall uio_pdrv_genirq_init+0x0/0x11 returned 0 after 31 usecs calling uio_dmem_genirq_init+0x0/0x11 @ 1 initcall uio_dmem_genirq_init+0x0/0x11 returned 0 after 42 usecs calling sercos3_pci_driver_init+0x0/0x16 @ 1 initcall sercos3_pci_driver_init+0x0/0x16 returned 0 after 43 usecs calling uio_pci_driver_init+0x0/0x16 @ 1 initcall uio_pci_driver_init+0x0/0x16 returned 0 after 36 usecs calling mf624_pci_driver_init+0x0/0x16 @ 1 initcall mf624_pci_driver_init+0x0/0x16 returned 0 after 43 usecs calling cdrom_init+0x0/0xc @ 1 initcall cdrom_init+0x0/0xc returned 0 after 27 usecs calling nonstatic_sysfs_init+0x0/0xf @ 1 initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 4 usecs calling yenta_socket_init+0x0/0x16 @ 1 initcall yenta_socket_init+0x0/0x16 returned 0 after 39 usecs calling pd6729_module_init+0x0/0x16 @ 1 initcall pd6729_module_init+0x0/0x16 returned 0 after 36 usecs calling init_i82365+0x0/0x497 @ 1 Intel ISA PCIC probe: Intel ISA PCIC probe: not found. not found. initcall init_i82365+0x0/0x497 returned -19 after 1954 usecs calling i82092aa_module_init+0x0/0x16 @ 1 initcall i82092aa_module_init+0x0/0x16 returned 0 after 37 usecs calling init_tcic+0x0/0x6b1 @ 1 Databook TCIC-2 PCMCIA probe: Databook TCIC-2 PCMCIA probe: not found. not found. initcall init_tcic+0x0/0x6b1 returned -19 after 2282 usecs calling mon_init+0x0/0xec @ 1 initcall mon_init+0x0/0xec returned 0 after 217 usecs calling ehci_hcd_init+0x0/0xc4 @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver initcall ehci_hcd_init+0x0/0xc4 returned 0 after 1397 usecs calling ehci_pci_init+0x0/0x62 @ 1 ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:02.1: setting latency timer to 64 ehci-pci 0000:00:02.1: EHCI Host Controller ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:02.1: debug port 1 ehci-pci 0000:00:02.1: cache line size of 32 is not supported ehci-pci 0000:00:02.1: irq 11, io mem 0xfeb00000 ata4: SATA link down (SStatus 0 SControl 300) async_waiting @ 109 async_continuing @ 109 after 4 usec initcall 5_async_port_probe+0x0/0x49 returned 0 after 1146508 usecs async_continuing @ 112 after 904807 usec ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 scsi 4:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 calling 8_sd_probe_async+0x0/0x1ba @ 91 sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) hub 1-0:1.0: USB hub found sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: Attached scsi generic sg0 type 0 hub 1-0:1.0: 10 ports detected initcall 6_async_port_probe+0x0/0x49 returned 0 after 1149272 usecs async_continuing @ 113 after 1139128 usec sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA initcall ehci_pci_init+0x0/0x62 returned 0 after 26604 usecs calling ehci_platform_init+0x0/0x49 @ 1 ehci-platform: EHCI generic platform driver initcall ehci_platform_init+0x0/0x49 returned 0 after 1813 usecs calling oxu_driver_init+0x0/0x11 @ 1 initcall oxu_driver_init+0x0/0x11 returned 0 after 28 usecs calling ohci_hcd_mod_init+0x0/0x84 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x84 returned 0 after 734 usecs calling ohci_platform_init+0x0/0x49 @ 1 ohci-platform: OHCI generic platform driver initcall ohci_platform_init+0x0/0x49 returned 0 after 1807 usecs calling uhci_hcd_init+0x0/0xbb @ 1 uhci_hcd: USB Universal Host Controller Interface driver initcall uhci_hcd_init+0x0/0xbb returned 0 after 1132 usecs calling sl811h_driver_init+0x0/0x11 @ 1 initcall sl811h_driver_init+0x0/0x11 returned 0 after 29 usecs calling u132_hcd_init+0x0/0xaf @ 1 driver u132_hcd initcall u132_hcd_init+0x0/0xaf returned 0 after 2012 usecs calling r8a66597_driver_init+0x0/0x11 @ 1 initcall r8a66597_driver_init+0x0/0x11 returned 0 after 29 usecs calling isp1760_init+0x0/0x5c @ 1 initcall isp1760_init+0x0/0x5c returned 0 after 162 usecs calling ssb_hcd_init+0x0/0x11 @ 1 initcall ssb_hcd_init+0x0/0x11 returned 0 after 31 usecs calling fusbh200_hcd_init+0x0/0xae @ 1 fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after initcall fusbh200_hcd_init+0x0/0xae returned 0 after 1469 usecs calling fotg210_hcd_init+0x0/0xae @ 1 fotg210_hcd: FOTG210 Host Controller (EHCI) Driver 4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after initcall fotg210_hcd_init+0x0/0xae returned 0 after 2277 usecs calling c67x00_driver_init+0x0/0x11 @ 1 initcall c67x00_driver_init+0x0/0x11 returned 0 after 29 usecs calling acm_init+0x0/0xd8 @ 1 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters initcall acm_init+0x0/0xd8 returned 0 after 2002 usecs calling usblp_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usblp initcall usblp_driver_init+0x0/0x16 returned 0 after 333 usecs calling wdm_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_wdm initcall wdm_driver_init+0x0/0x16 returned 0 after 1646 usecs calling usbtmc_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usbtmc initcall usbtmc_driver_init+0x0/0x16 returned 0 after 1478 usecs calling usb_storage_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usb-storage initcall usb_storage_driver_init+0x0/0x16 returned 0 after 1346 usecs calling alauda_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-alauda initcall alauda_driver_init+0x0/0x16 returned 0 after 1178 usecs calling datafab_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-datafab initcall datafab_driver_init+0x0/0x16 returned 0 after 1348 usecs calling ene_ub6250_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums_eneub6250 initcall ene_ub6250_driver_init+0x0/0x16 returned 0 after 709 usecs calling freecom_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-freecom initcall freecom_driver_init+0x0/0x16 returned 0 after 1347 usecs calling isd200_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-isd200 initcall isd200_driver_init+0x0/0x16 returned 0 after 205 usecs calling jumpshot_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-jumpshot initcall jumpshot_driver_init+0x0/0x16 returned 0 after 539 usecs calling realtek_cr_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-realtek initcall realtek_cr_driver_init+0x0/0x16 returned 0 after 1348 usecs calling usb_serial_init+0x0/0x17f @ 1 usbcore: registered new interface driver usbserial initcall usb_serial_init+0x0/0x17f returned 0 after 1035 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver ark3116 usbserial: USB Serial support registered for ark3116 initcall usb_serial_module_init+0x0/0x19 returned 0 after 2019 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver belkin_sa usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter initcall usb_serial_module_init+0x0/0x19 returned 0 after 3737 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver ch341 usbserial: USB Serial support registered for ch341-uart initcall usb_serial_module_init+0x0/0x19 returned 0 after 1209 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver cp210x usbserial: USB Serial support registered for cp210x initcall usb_serial_module_init+0x0/0x19 returned 0 after 1681 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver cyberjack usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader initcall usb_serial_module_init+0x0/0x19 returned 0 after 2382 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver digi_acceleport usbserial: USB Serial support registered for Digi 2 port USB adapter usbserial: USB Serial support registered for Digi 4 port USB adapter initcall usb_serial_module_init+0x0/0x19 returned 0 after 3299 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver empeg usbserial: USB Serial support registered for empeg initcall usb_serial_module_init+0x0/0x19 returned 0 after 2316 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver f81232 usbserial: USB Serial support registered for f81232 initcall usb_serial_module_init+0x0/0x19 returned 0 after 1679 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device initcall usb_serial_module_init+0x0/0x19 returned 0 after 1807 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver garmin_gps usbserial: USB Serial support registered for Garmin GPS usb/tty initcall usb_serial_module_init+0x0/0x19 returned 0 after 1457 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver iuu_phoenix usbserial: USB Serial support registered for iuu_phoenix initcall usb_serial_module_init+0x0/0x19 returned 0 after 2395 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver kl5kusb105 usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect initcall usb_serial_module_init+0x0/0x19 returned 0 after 1666 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver mct_u232 usbserial: USB Serial support registered for MCT U232 initcall usb_serial_module_init+0x0/0x19 returned 0 after 1379 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver metro_usb usbserial: USB Serial support registered for Metrologic USB to Serial initcall usb_serial_module_init+0x0/0x19 returned 0 after 2304 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver mos7720 usbserial: USB Serial support registered for Moschip 2 port adapter initcall usb_serial_module_init+0x0/0x19 returned 0 after 1627 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver mos7840 usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver initcall usb_serial_module_init+0x0/0x19 returned 0 after 1876 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver navman usbserial: USB Serial support registered for navman initcall usb_serial_module_init+0x0/0x19 returned 0 after 1680 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver opticon usbserial: USB Serial support registered for opticon initcall usb_serial_module_init+0x0/0x19 returned 0 after 2018 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver oti6858 usbserial: USB Serial support registered for oti6858 initcall usb_serial_module_init+0x0/0x19 returned 0 after 2018 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 initcall usb_serial_module_init+0x0/0x19 returned 0 after 1679 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver quatech2 usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver initcall usb_serial_module_init+0x0/0x19 returned 0 after 1238 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver sierra usbserial: USB Serial support registered for Sierra USB modem initcall usb_serial_module_init+0x0/0x19 returned 0 after 2397 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver usb_serial_simple usbserial: USB Serial support registered for zio usbserial: USB Serial support registered for funsoft usbserial: USB Serial support registered for flashloader usbserial: USB Serial support registered for vivopay usbserial: USB Serial support registered for moto_modem usbserial: USB Serial support registered for hp4x usbserial: USB Serial support registered for suunto usbserial: USB Serial support registered for siemens_mpi initcall usb_serial_module_init+0x0/0x19 returned 0 after 8761 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver ti_usb_3410_5052 usbserial: USB Serial support registered for TI USB 3410 1 port adapter usbserial: USB Serial support registered for TI USB 5052 2 port adapter initcall usb_serial_module_init+0x0/0x19 returned 0 after 2533 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver visor usbserial: USB Serial support registered for Handspring Visor / Palm OS usbserial: USB Serial support registered for Sony Clie 5.0 usbserial: USB Serial support registered for Sony Clie 3.5 initcall usb_serial_module_init+0x0/0x19 returned 0 after 4736 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver wishbone_serial usbserial: USB Serial support registered for wishbone_serial initcall usb_serial_module_init+0x0/0x19 returned 0 after 1796 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver whiteheat usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) usbserial: USB Serial support registered for Connect Tech - WhiteHEAT initcall usb_serial_module_init+0x0/0x19 returned 0 after 3078 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver keyspan_pda usbserial: USB Serial support registered for Keyspan PDA usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) initcall usb_serial_module_init+0x0/0x19 returned 0 after 2662 usecs calling usb_serial_module_init+0x0/0x19 @ 1 usbcore: registered new interface driver xsens_mt usbserial: USB Serial support registered for xsens_mt initcall usb_serial_module_init+0x0/0x19 returned 0 after 1380 usecs calling adu_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver adutux initcall adu_driver_init+0x0/0x16 returned 0 after 1478 usecs calling cypress_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cypress_cy7c63 initcall cypress_driver_init+0x0/0x16 returned 0 after 1856 usecs calling cytherm_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver cytherm initcall cytherm_driver_init+0x0/0x16 returned 0 after 1646 usecs calling emi26_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver emi26 - firmware loader initcall emi26_driver_init+0x0/0x16 returned 0 after 1427 usecs calling emi62_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver emi62 - firmware loader initcall emi62_driver_init+0x0/0x16 returned 0 after 1425 usecs calling ftdi_elan_init+0x0/0x180 @ 1 driver ftdi-elan ata6.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 ata6: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0 usbcore: registered new interface driver ftdi-elan initcall ftdi_elan_init+0x0/0x180 returned 0 after 4651 usecs calling idmouse_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver idmouse initcall idmouse_driver_init+0x0/0x16 returned 0 after 1643 usecs calling iowarrior_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver iowarrior initcall iowarrior_driver_init+0x0/0x16 returned 0 after 1009 usecs calling lcd_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usblcd initcall lcd_driver_init+0x0/0x16 returned 0 after 1477 usecs calling ld_usb_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ldusb initcall ld_usb_driver_init+0x0/0x16 returned 0 after 330 usecs calling led_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usbled initcall led_driver_init+0x0/0x16 returned 0 after 1478 usecs calling tower_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver legousbtower initcall tower_driver_init+0x0/0x16 returned 0 after 539 usecs calling rio_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver rio500 initcall rio_driver_init+0x0/0x16 returned 0 after 1478 usecs calling usbtest_init+0x0/0x54 @ 1 usbcore: registered new interface driver usbtest initcall usbtest_init+0x0/0x54 returned 0 after 670 usecs calling ehset_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usb_ehset_test initcall ehset_driver_init+0x0/0x16 returned 0 after 879 usecs calling tv_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver trancevibrator initcall tv_driver_init+0x0/0x16 returned 0 after 878 usecs calling uss720_init+0x0/0x52 @ 1 usbcore: registered new interface driver uss720 uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip uss720: NOTE: this is a special purpose driver to allow nonstandard uss720: protocols (eg. bitbang) over USS720 usb to parallel cables uss720: If you just want to connect to a printer, use usblp instead initcall uss720_init+0x0/0x52 returned 0 after 5118 usecs calling sevseg_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usbsevseg initcall sevseg_driver_init+0x0/0x16 returned 0 after 1009 usecs calling usb3503_init+0x0/0x4a @ 1 initcall usb3503_init+0x0/0x4a returned 0 after 76 usecs calling usb_sisusb_init+0x0/0x1b @ 1 usbcore: registered new interface driver sisusb initcall usb_sisusb_init+0x0/0x1b returned 0 after 501 usecs calling samsung_usb2phy_driver_init+0x0/0x11 @ 1 initcall samsung_usb2phy_driver_init+0x0/0x11 returned 0 after 29 usecs calling samsung_usb3phy_driver_init+0x0/0x11 @ 1 initcall samsung_usb3phy_driver_init+0x0/0x11 returned 0 after 28 usecs calling gpio_vbus_driver_init+0x0/0x11 @ 1 initcall gpio_vbus_driver_init+0x0/0x11 returned 0 after 27 usecs calling rcar_usb_phy_driver_init+0x0/0x11 @ 1 initcall rcar_usb_phy_driver_init+0x0/0x11 returned 0 after 29 usecs calling musb_init+0x0/0x1e @ 1 initcall musb_init+0x0/0x1e returned 0 after 27 usecs calling tusb_driver_init+0x0/0x11 @ 1 initcall tusb_driver_init+0x0/0x11 returned 0 after 28 usecs calling ci_hdrc_driver_init+0x0/0x11 @ 1 initcall ci_hdrc_driver_init+0x0/0x11 returned 0 after 35 usecs calling ci_hdrc_msm_driver_init+0x0/0x11 @ 1 initcall ci_hdrc_msm_driver_init+0x0/0x11 returned 0 after 29 usecs calling ci_hdrc_pci_driver_init+0x0/0x16 @ 1 initcall ci_hdrc_pci_driver_init+0x0/0x16 returned 0 after 58 usecs calling ci_hdrc_imx_driver_init+0x0/0x11 @ 1 initcall ci_hdrc_imx_driver_init+0x0/0x11 returned 0 after 28 usecs calling usbmisc_imx_driver_init+0x0/0x11 @ 1 initcall usbmisc_imx_driver_init+0x0/0x11 returned 0 after 28 usecs calling renesas_usbhs_driver_init+0x0/0x11 @ 1 initcall renesas_usbhs_driver_init+0x0/0x11 returned 0 after 28 usecs calling gadget_cfs_init+0x0/0x19 @ 1 initcall gadget_cfs_init+0x0/0x19 returned 0 after 25 usecs calling init+0x0/0x2e8 @ 1 dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 dummy_hcd dummy_hcd.0: Dummy host controller ata6.01: configured for UDMA/33 dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 2 async_waiting @ 113 async_continuing @ 113 after 4 usec hub 2-0:1.0: USB hub found scsi 5:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 scsi 5:0:1:0: Attached scsi generic sg1 type 5 hub 2-0:1.0: 1 port detected initcall 7_async_port_probe+0x0/0x49 returned 0 after 1455987 usecs initcall init+0x0/0x2e8 returned 0 after 12075 usecs calling net2272_init+0x0/0x3c @ 1 initcall net2272_init+0x0/0x3c returned 0 after 94 usecs calling udc_pci_driver_init+0x0/0x16 @ 1 initcall udc_pci_driver_init+0x0/0x16 returned 0 after 39 usecs calling udc_driver_init+0x0/0x11 @ 1 initcall udc_driver_init+0x0/0x11 returned 0 after 31 usecs calling r8a66597_driver_init+0x0/0x14 @ 1 initcall r8a66597_driver_init+0x0/0x14 returned -19 after 49 usecs calling ncmmod_init+0x0/0xf @ 1 initcall ncmmod_init+0x0/0xf returned 0 after 18 usecs calling init+0x0/0xf @ 1 udc dummy_udc.0: registering UDC driver [g_ncm] using random self ethernet address using random host ethernet address g_ncm gadget: adding config #1 'CDC Ethernet (NCM)'/b2c40ce0 g_ncm gadget: adding 'cdc_network'/eb816f00 to config 'CDC Ethernet (NCM)'/b2c40ce0 usb0: HOST MAC aa:99:de:d4:76:38 usb0: MAC 2a:0a:99:90:0a:c2 g_ncm gadget: CDC Network: dual speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep5in-int g_ncm gadget: cfg 1/b2c40ce0 speeds: high full g_ncm gadget: interface 0 = cdc_network/eb816f00 g_ncm gadget: interface 1 = cdc_network/eb816f00 g_ncm gadget: NCM Gadget g_ncm gadget: g_ncm ready dummy_udc dummy_udc.0: binding gadget driver 'g_ncm' dummy_hcd dummy_hcd.0: port status 0x00010101 has changes initcall init+0x0/0xf returned 0 after 15500 usecs calling i8042_init+0x0/0x33e @ 1 i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 initcall i8042_init+0x0/0x33e returned 0 after 4027 usecs calling parkbd_init+0x0/0x177 @ 1 parport0: cannot grant exclusive access for device parkbd initcall parkbd_init+0x0/0x177 returned -19 after 241 usecs calling serport_init+0x0/0x2c @ 1 initcall serport_init+0x0/0x2c returned 0 after 4 usecs calling ct82c710_init+0x0/0x137 @ 1 initcall ct82c710_init+0x0/0x137 returned -19 after 13 usecs calling pcips2_driver_init+0x0/0x16 @ 1 initcall pcips2_driver_init+0x0/0x16 returned 0 after 47 usecs calling ps2mult_drv_init+0x0/0x16 @ 1 initcall ps2mult_drv_init+0x0/0x16 returned 0 after 29 usecs calling altera_ps2_driver_init+0x0/0x11 @ 1 initcall altera_ps2_driver_init+0x0/0x11 returned 0 after 31 usecs calling arc_ps2_driver_init+0x0/0x11 @ 1 initcall arc_ps2_driver_init+0x0/0x11 returned 0 after 31 usecs calling apbps2_of_driver_init+0x0/0x11 @ 1 initcall apbps2_of_driver_init+0x0/0x11 returned 0 after 30 usecs calling olpc_apsp_driver_init+0x0/0x11 @ 1 initcall olpc_apsp_driver_init+0x0/0x11 returned 0 after 44 usecs calling fm801_gp_driver_init+0x0/0x16 @ 1 initcall fm801_gp_driver_init+0x0/0x16 returned 0 after 38 usecs calling l4_init+0x0/0x27e @ 1 initcall l4_init+0x0/0x27e returned -19 after 15 usecs calling ns558_init+0x0/0x2fe @ 1 initcall ns558_init+0x0/0x2fe returned 0 after 7856 usecs calling mousedev_init+0x0/0x7c @ 1 mousedev: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x7c returned 0 after 1749 usecs calling joydev_init+0x0/0xf @ 1 initcall joydev_init+0x0/0xf returned 0 after 4 usecs calling evdev_init+0x0/0xf @ 1 initcall evdev_init+0x0/0xf returned 0 after 4 usecs calling adp5588_driver_init+0x0/0x11 @ 1 initcall adp5588_driver_init+0x0/0x11 returned 0 after 32 usecs calling adp5589_driver_init+0x0/0x11 @ 1 initcall adp5589_driver_init+0x0/0x11 returned 0 after 26 usecs calling atkbd_init+0x0/0x16 @ 1 initcall atkbd_init+0x0/0x16 returned 0 after 29 usecs calling cros_ec_keyb_driver_init+0x0/0x11 @ 1 initcall cros_ec_keyb_driver_init+0x0/0x11 returned 0 after 40 usecs calling events_driver_init+0x0/0x11 @ 1 initcall events_driver_init+0x0/0x11 returned 0 after 29 usecs calling gpio_keys_polled_driver_init+0x0/0x11 @ 1 initcall gpio_keys_polled_driver_init+0x0/0x11 returned 0 after 31 usecs calling lm8323_i2c_driver_init+0x0/0x11 @ 1 initcall lm8323_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs calling lm8333_driver_init+0x0/0x11 @ 1 initcall lm8333_driver_init+0x0/0x11 returned 0 after 26 usecs calling matrix_keypad_driver_init+0x0/0x11 @ 1 initcall matrix_keypad_driver_init+0x0/0x11 returned 0 after 30 usecs calling max7359_i2c_driver_init+0x0/0x11 @ 1 initcall max7359_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs calling mcs_touchkey_driver_init+0x0/0x11 @ 1 initcall mcs_touchkey_driver_init+0x0/0x11 returned 0 after 26 usecs calling mpr_touchkey_driver_init+0x0/0x11 @ 1 initcall mpr_touchkey_driver_init+0x0/0x11 returned 0 after 26 usecs calling nkbd_drv_init+0x0/0x16 @ 1 initcall nkbd_drv_init+0x0/0x16 returned 0 after 36 usecs calling opencores_kbd_device_driver_init+0x0/0x11 @ 1 initcall opencores_kbd_device_driver_init+0x0/0x11 returned 0 after 31 usecs calling qt2160_driver_init+0x0/0x11 @ 1 initcall qt2160_driver_init+0x0/0x11 returned 0 after 26 usecs calling skbd_drv_init+0x0/0x16 @ 1 initcall skbd_drv_init+0x0/0x16 returned 0 after 28 usecs calling sunkbd_drv_init+0x0/0x16 @ 1 initcall sunkbd_drv_init+0x0/0x16 returned 0 after 27 usecs calling tc3589x_keypad_driver_init+0x0/0x11 @ 1 initcall tc3589x_keypad_driver_init+0x0/0x11 returned 0 after 45 usecs calling twl4030_kp_driver_init+0x0/0x11 @ 1 initcall twl4030_kp_driver_init+0x0/0x11 returned 0 after 31 usecs calling xtkbd_drv_init+0x0/0x16 @ 1 initcall xtkbd_drv_init+0x0/0x16 returned 0 after 36 usecs calling auo_pixcir_driver_init+0x0/0x11 @ 1 initcall auo_pixcir_driver_init+0x0/0x11 returned 0 after 27 usecs calling cy8ctmg110_driver_init+0x0/0x11 @ 1 initcall cy8ctmg110_driver_init+0x0/0x11 returned 0 after 94 usecs calling cyttsp_i2c_driver_init+0x0/0x11 @ 1 initcall cyttsp_i2c_driver_init+0x0/0x11 returned 0 after 49 usecs calling da9034_touch_driver_init+0x0/0x11 @ 1 initcall da9034_touch_driver_init+0x0/0x11 returned 0 after 31 usecs calling dynapro_drv_init+0x0/0x16 @ 1 initcall dynapro_drv_init+0x0/0x16 returned 0 after 27 usecs calling hampshire_drv_init+0x0/0x16 @ 1 initcall hampshire_drv_init+0x0/0x16 returned 0 after 27 usecs calling gunze_drv_init+0x0/0x16 @ 1 initcall gunze_drv_init+0x0/0x16 returned 0 after 27 usecs calling eeti_ts_driver_init+0x0/0x11 @ 1 initcall eeti_ts_driver_init+0x0/0x11 returned 0 after 32 usecs calling elo_drv_init+0x0/0x16 @ 1 initcall elo_drv_init+0x0/0x16 returned 0 after 27 usecs calling egalax_ts_driver_init+0x0/0x11 @ 1 initcall egalax_ts_driver_init+0x0/0x11 returned 0 after 26 usecs calling fujitsu_drv_init+0x0/0x16 @ 1 initcall fujitsu_drv_init+0x0/0x16 returned 0 after 27 usecs calling max11801_ts_driver_init+0x0/0x11 @ 1 initcall max11801_ts_driver_init+0x0/0x11 returned 0 after 25 usecs calling mcs5000_ts_driver_init+0x0/0x11 @ 1 initcall mcs5000_ts_driver_init+0x0/0x11 returned 0 after 25 usecs calling mms114_driver_init+0x0/0x11 @ 1 initcall mms114_driver_init+0x0/0x11 returned 0 after 25 usecs calling mtouch_drv_init+0x0/0x16 @ 1 initcall mtouch_drv_init+0x0/0x16 returned 0 after 27 usecs calling mk712_init+0x0/0x1c1 @ 1 mk712: device not present initcall mk712_init+0x0/0x1c1 returned -19 after 683 usecs calling htcpen_isa_init+0x0/0xa @ 1 initcall htcpen_isa_init+0x0/0xa returned -19 after 4 usecs calling usbtouch_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver usbtouchscreen initcall usbtouch_driver_init+0x0/0x16 returned 0 after 879 usecs calling ti_tsc_driver_init+0x0/0x11 @ 1 initcall ti_tsc_driver_init+0x0/0x11 returned 0 after 29 usecs calling touchit213_drv_init+0x0/0x16 @ 1 initcall touchit213_drv_init+0x0/0x16 returned 0 after 39 usecs calling tr_drv_init+0x0/0x16 @ 1 initcall tr_drv_init+0x0/0x16 returned 0 after 28 usecs calling tw_drv_init+0x0/0x16 @ 1 initcall tw_drv_init+0x0/0x16 returned 0 after 27 usecs calling tsc2007_driver_init+0x0/0x11 @ 1 initcall tsc2007_driver_init+0x0/0x11 returned 0 after 26 usecs calling w8001_drv_init+0x0/0x16 @ 1 initcall w8001_drv_init+0x0/0x16 returned 0 after 34 usecs calling wacom_i2c_driver_init+0x0/0x11 @ 1 initcall wacom_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs calling wm831x_ts_driver_init+0x0/0x11 @ 1 initcall wm831x_ts_driver_init+0x0/0x11 returned 0 after 31 usecs calling tps6507x_ts_driver_init+0x0/0x11 @ 1 initcall tps6507x_ts_driver_init+0x0/0x11 returned 0 after 30 usecs calling pm860x_onkey_driver_init+0x0/0x11 @ 1 initcall pm860x_onkey_driver_init+0x0/0x11 returned 0 after 31 usecs calling bma150_driver_init+0x0/0x11 @ 1 initcall bma150_driver_init+0x0/0x11 returned 0 after 26 usecs calling gp2a_i2c_driver_init+0x0/0x11 @ 1 initcall gp2a_i2c_driver_init+0x0/0x11 returned 0 after 25 usecs calling gpio_tilt_polled_driver_init+0x0/0x11 @ 1 initcall gpio_tilt_polled_driver_init+0x0/0x11 returned 0 after 31 usecs calling keyspan_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver keyspan_remote initcall keyspan_driver_init+0x0/0x16 returned 0 after 879 usecs calling mpu3050_i2c_driver_init+0x0/0x11 @ 1 initcall mpu3050_i2c_driver_init+0x0/0x11 returned 0 after 33 usecs calling pcf50633_input_driver_init+0x0/0x11 @ 1 initcall pcf50633_input_driver_init+0x0/0x11 returned 0 after 30 usecs calling pcf8574_kp_driver_init+0x0/0x11 @ 1 initcall pcf8574_kp_driver_init+0x0/0x11 returned 0 after 32 usecs calling powermate_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver powermate initcall powermate_driver_init+0x0/0x16 returned 0 after 1008 usecs calling twl4030_pwrbutton_driver_init+0x0/0x14 @ 1 initcall twl4030_pwrbutton_driver_init+0x0/0x14 returned -19 after 49 usecs calling twl4030_vibra_driver_init+0x0/0x11 @ 1 initcall twl4030_vibra_driver_init+0x0/0x11 returned 0 after 30 usecs calling twl6040_vibra_driver_init+0x0/0x11 @ 1 initcall twl6040_vibra_driver_init+0x0/0x11 returned 0 after 31 usecs calling uinput_init+0x0/0xf @ 1 gameport gameport0: NS558 PnP Gameport is pnp00:10/gameport0, io 0x201, speed 903kHz dummy_hcd dummy_hcd.0: port status 0x00010101 has changes initcall uinput_init+0x0/0xf returned 0 after 17685 usecs calling wm831x_on_driver_init+0x0/0x11 @ 1 initcall wm831x_on_driver_init+0x0/0x11 returned 0 after 36 usecs calling slidebar_init+0x0/0xab @ 1 ideapad_slidebar: DMI does not match initcall slidebar_init+0x0/0xab returned -19 after 591 usecs calling i2o_iop_init+0x0/0x45 @ 1 I2O subsystem v1.325 i2o: max drivers = 8 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > initcall i2o_iop_init+0x0/0x45 returned 0 after 3704 usecs calling i2o_config_init+0x0/0x3f @ 1 I2O Configuration OSM v1.323 initcall i2o_config_init+0x0/0x3f returned 0 after 1217 usecs calling i2o_bus_init+0x0/0x3e @ 1 I2O Bus Adapter OSM v1.317 initcall i2o_bus_init+0x0/0x3e returned 0 after 858 usecs calling i2o_scsi_init+0x0/0x3e @ 1 I2O SCSI Peripheral OSM v1.316 initcall i2o_scsi_init+0x0/0x3e returned 0 after 1550 usecs calling i2o_proc_init+0x0/0x169 @ 1 I2O ProcFS OSM v1.316 initcall i2o_proc_init+0x0/0x169 returned 0 after 1018 usecs calling pm80x_rtc_driver_init+0x0/0x11 @ 1 initcall pm80x_rtc_driver_init+0x0/0x11 returned 0 after 35 usecs calling bq32k_driver_init+0x0/0x11 @ 1 initcall bq32k_driver_init+0x0/0x11 returned 0 after 31 usecs calling cmos_init+0x0/0x5e @ 1 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:03: alarms up to one day, 114 bytes nvram initcall cmos_init+0x0/0x5e returned 0 after 2174 usecs calling ds1286_platform_driver_init+0x0/0x11 @ 1 initcall ds1286_platform_driver_init+0x0/0x11 returned 0 after 31 usecs calling ds1307_driver_init+0x0/0x11 @ 1 initcall ds1307_driver_init+0x0/0x11 returned 0 after 52 usecs calling ds1374_driver_init+0x0/0x11 @ 1 initcall ds1374_driver_init+0x0/0x11 returned 0 after 26 usecs calling ds1511_rtc_driver_init+0x0/0x11 @ 1 initcall ds1511_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs calling ds1672_driver_init+0x0/0x11 @ 1 initcall ds1672_driver_init+0x0/0x11 returned 0 after 26 usecs calling ds1742_rtc_driver_init+0x0/0x11 @ 1 initcall ds1742_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs calling ds3232_driver_init+0x0/0x11 @ 1 initcall ds3232_driver_init+0x0/0x11 returned 0 after 33 usecs calling em3027_driver_init+0x0/0x11 @ 1 initcall em3027_driver_init+0x0/0x11 returned 0 after 32 usecs calling fm3130_driver_init+0x0/0x11 @ 1 initcall fm3130_driver_init+0x0/0x11 returned 0 after 25 usecs calling hid_time_platform_driver_init+0x0/0x11 @ 1 initcall hid_time_platform_driver_init+0x0/0x11 returned 0 after 31 usecs calling isl1208_driver_init+0x0/0x11 @ 1 initcall isl1208_driver_init+0x0/0x11 returned 0 after 27 usecs calling isl12022_driver_init+0x0/0x11 @ 1 initcall isl12022_driver_init+0x0/0x11 returned 0 after 26 usecs calling lp8788_rtc_driver_init+0x0/0x11 @ 1 initcall lp8788_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs calling m48t35_platform_driver_init+0x0/0x11 @ 1 initcall m48t35_platform_driver_init+0x0/0x11 returned 0 after 30 usecs calling m48t86_rtc_platform_driver_init+0x0/0x11 @ 1 initcall m48t86_rtc_platform_driver_init+0x0/0x11 returned 0 after 30 usecs calling max6900_driver_init+0x0/0x11 @ 1 initcall max6900_driver_init+0x0/0x11 returned 0 after 34 usecs calling msm6242_rtc_driver_init+0x0/0x14 @ 1 initcall msm6242_rtc_driver_init+0x0/0x14 returned -19 after 62 usecs calling pcf2127_driver_init+0x0/0x11 @ 1 initcall pcf2127_driver_init+0x0/0x11 returned 0 after 26 usecs calling pcf8523_driver_init+0x0/0x11 @ 1 initcall pcf8523_driver_init+0x0/0x11 returned 0 after 27 usecs calling pcf50633_rtc_driver_init+0x0/0x11 @ 1 initcall pcf50633_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs calling rs5c372_driver_init+0x0/0x11 @ 1 initcall rs5c372_driver_init+0x0/0x11 returned 0 after 27 usecs calling rv3029c2_driver_init+0x0/0x11 @ 1 initcall rv3029c2_driver_init+0x0/0x11 returned 0 after 26 usecs calling rx8581_driver_init+0x0/0x11 @ 1 initcall rx8581_driver_init+0x0/0x11 returned 0 after 26 usecs calling snvs_rtc_driver_init+0x0/0x11 @ 1 initcall snvs_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs calling test_init+0x0/0xa2 @ 1 rtc-test rtc-test.0: rtc core: registered test as rtc1 rtc-test rtc-test.1: rtc core: registered test as rtc2 initcall test_init+0x0/0xa2 returned 0 after 1551 usecs calling twl4030rtc_driver_init+0x0/0x11 @ 1 initcall twl4030rtc_driver_init+0x0/0x11 returned 0 after 31 usecs calling tps65910_rtc_driver_init+0x0/0x11 @ 1 initcall tps65910_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs calling rtc_device_driver_init+0x0/0x11 @ 1 initcall rtc_device_driver_init+0x0/0x11 returned 0 after 31 usecs calling wm831x_rtc_driver_init+0x0/0x11 @ 1 initcall wm831x_rtc_driver_init+0x0/0x11 returned 0 after 37 usecs calling x1205_driver_init+0x0/0x11 @ 1 initcall x1205_driver_init+0x0/0x11 returned 0 after 27 usecs calling moxart_rtc_driver_init+0x0/0x11 @ 1 initcall moxart_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs calling smbalert_driver_init+0x0/0x11 @ 1 initcall smbalert_driver_init+0x0/0x11 returned 0 after 27 usecs calling i2c_dev_init+0x0/0xb8 @ 1 i2c /dev entries driver initcall i2c_dev_init+0x0/0xb8 returned 0 after 1356 usecs calling ali1535_driver_init+0x0/0x16 @ 1 initcall ali1535_driver_init+0x0/0x16 returned 0 after 47 usecs calling amd756_driver_init+0x0/0x16 @ 1 initcall amd756_driver_init+0x0/0x16 returned 0 after 45 usecs calling amd756_s4882_init+0x0/0x261 @ 1 initcall amd756_s4882_init+0x0/0x261 returned -19 after 4 usecs calling i2c_i801_init+0x0/0x16 @ 1 initcall i2c_i801_init+0x0/0x16 returned 0 after 55 usecs calling smbus_sch_driver_init+0x0/0x11 @ 1 initcall smbus_sch_driver_init+0x0/0x11 returned 0 after 38 usecs calling ismt_driver_init+0x0/0x16 @ 1 initcall ismt_driver_init+0x0/0x16 returned 0 after 38 usecs calling nforce2_driver_init+0x0/0x16 @ 1 sd 4:0:0:0: [sda] Attached SCSI disk initcall 8_sd_probe_async+0x0/0x1ba returned 0 after 655420 usecs i2c i2c-0: Transaction failed (0x10)! i2c i2c-0: nForce2 SMBus adapter at 0x4c00 i2c i2c-1: Transaction failed (0x10)! g_ncm gadget: resume dummy_hcd dummy_hcd.0: port status 0x00100503 has changes i2c i2c-1: Transaction failed (0x10)! i2c i2c-1: nForce2 SMBus adapter at 0x4c40 initcall nforce2_driver_init+0x0/0x16 returned 0 after 54017 usecs calling nforce2_s4985_init+0x0/0x26d @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-0: PCA9556 configuration failed initcall nforce2_s4985_init+0x0/0x26d returned -5 after 4239 usecs calling piix4_driver_init+0x0/0x16 @ 1 initcall piix4_driver_init+0x0/0x16 returned 0 after 54 usecs calling i2c_sis5595_init+0x0/0x16 @ 1 initcall i2c_sis5595_init+0x0/0x16 returned 0 after 46 usecs calling sis630_driver_init+0x0/0x16 @ 1 initcall sis630_driver_init+0x0/0x16 returned 0 after 39 usecs calling vt586b_driver_init+0x0/0x16 @ 1 initcall vt586b_driver_init+0x0/0x16 returned 0 after 45 usecs calling i2c_vt596_init+0x0/0x16 @ 1 initcall i2c_vt596_init+0x0/0x16 returned 0 after 40 usecs calling dw_i2c_driver_init+0x0/0x16 @ 1 initcall dw_i2c_driver_init+0x0/0x16 returned 0 after 39 usecs calling pch_pcidriver_init+0x0/0x16 @ 1 initcall pch_pcidriver_init+0x0/0x16 returned 0 after 38 usecs calling kempld_i2c_driver_init+0x0/0x11 @ 1 initcall kempld_i2c_driver_init+0x0/0x11 returned 0 after 52 usecs calling i2c_pca_pf_driver_init+0x0/0x11 @ 1 initcall i2c_pca_pf_driver_init+0x0/0x11 returned 0 after 31 usecs calling simtec_i2c_driver_init+0x0/0x11 @ 1 initcall simtec_i2c_driver_init+0x0/0x11 returned 0 after 31 usecs calling xiic_i2c_driver_init+0x0/0x11 @ 1 initcall xiic_i2c_driver_init+0x0/0x11 returned 0 after 31 usecs calling diolan_u2c_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver i2c-diolan-u2c initcall diolan_u2c_driver_init+0x0/0x16 returned 0 after 877 usecs calling i2c_parport_init+0x0/0x4a @ 1 i2c-parport: adapter type unspecified initcall i2c_parport_init+0x0/0x4a returned -19 after 759 usecs calling i2c_parport_init+0x0/0x15d @ 1 i2c-parport-light: adapter type unspecified initcall i2c_parport_init+0x0/0x15d returned -19 after 800 usecs calling taos_init+0x0/0x16 @ 1 initcall taos_init+0x0/0x16 returned 0 after 33 usecs calling i2c_tiny_usb_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver i2c-tiny-usb initcall i2c_tiny_usb_driver_init+0x0/0x16 returned 0 after 1529 usecs calling scx200_acb_init+0x0/0x7b @ 1 scx200_acb: NatSemi SCx200 ACCESS.bus Driver initcall scx200_acb_init+0x0/0x7b returned 0 after 1005 usecs calling msp_driver_init+0x0/0x11 @ 1 initcall msp_driver_init+0x0/0x11 returned 0 after 59 usecs calling tda7432_driver_init+0x0/0x11 @ 1 initcall tda7432_driver_init+0x0/0x11 returned 0 after 28 usecs calling tda9840_driver_init+0x0/0x11 @ 1 initcall tda9840_driver_init+0x0/0x11 returned 0 after 28 usecs calling tea6415c_driver_init+0x0/0x11 @ 1 initcall tea6415c_driver_init+0x0/0x11 returned 0 after 28 usecs calling saa711x_driver_init+0x0/0x11 @ 1 initcall saa711x_driver_init+0x0/0x11 returned 0 after 29 usecs calling saa717x_driver_init+0x0/0x11 @ 1 initcall saa717x_driver_init+0x0/0x11 returned 0 after 27 usecs calling saa7127_driver_init+0x0/0x11 @ 1 initcall saa7127_driver_init+0x0/0x11 returned 0 after 29 usecs calling saa7185_driver_init+0x0/0x11 @ 1 initcall saa7185_driver_init+0x0/0x11 returned 0 after 27 usecs calling saa7191_driver_init+0x0/0x11 @ 1 initcall saa7191_driver_init+0x0/0x11 returned 0 after 27 usecs calling adv7343_driver_init+0x0/0x11 @ 1 initcall adv7343_driver_init+0x0/0x11 returned 0 after 36 usecs calling adv7393_driver_init+0x0/0x11 @ 1 initcall adv7393_driver_init+0x0/0x11 returned 0 after 28 usecs calling vpx3220_driver_init+0x0/0x11 @ 1 initcall vpx3220_driver_init+0x0/0x11 returned 0 after 43 usecs calling bt819_driver_init+0x0/0x11 @ 1 initcall bt819_driver_init+0x0/0x11 returned 0 after 28 usecs calling ks0127_driver_init+0x0/0x11 @ 1 initcall ks0127_driver_init+0x0/0x11 returned 0 after 28 usecs calling ths7303_driver_init+0x0/0x11 @ 1 initcall ths7303_driver_init+0x0/0x11 returned 0 after 29 usecs calling ths8200_driver_init+0x0/0x11 @ 1 initcall ths8200_driver_init+0x0/0x11 returned 0 after 46 usecs calling tvp5150_driver_init+0x0/0x11 @ 1 initcall tvp5150_driver_init+0x0/0x11 returned 0 after 28 usecs calling tw2804_driver_init+0x0/0x11 @ 1 initcall tw2804_driver_init+0x0/0x11 returned 0 after 29 usecs calling tw9903_driver_init+0x0/0x11 @ 1 initcall tw9903_driver_init+0x0/0x11 returned 0 after 107 usecs calling tw9906_driver_init+0x0/0x11 @ 1 initcall tw9906_driver_init+0x0/0x11 returned 0 after 45 usecs calling cs53l32a_driver_init+0x0/0x11 @ 1 initcall cs53l32a_driver_init+0x0/0x11 returned 0 after 36 usecs calling m52790_driver_init+0x0/0x11 @ 1 initcall m52790_driver_init+0x0/0x11 returned 0 after 27 usecs calling tlv320aic23b_driver_init+0x0/0x11 @ 1 initcall tlv320aic23b_driver_init+0x0/0x11 returned 0 after 28 usecs calling uda1342_driver_init+0x0/0x11 @ 1 initcall uda1342_driver_init+0x0/0x11 returned 0 after 27 usecs calling wm8775_driver_init+0x0/0x11 @ 1 initcall wm8775_driver_init+0x0/0x11 returned 0 after 27 usecs calling wm8739_driver_init+0x0/0x11 @ 1 initcall wm8739_driver_init+0x0/0x11 returned 0 after 27 usecs calling vp27smpx_driver_init+0x0/0x11 @ 1 initcall vp27smpx_driver_init+0x0/0x11 returned 0 after 36 usecs calling upd64031a_driver_init+0x0/0x11 @ 1 initcall upd64031a_driver_init+0x0/0x11 returned 0 after 27 usecs calling upd64083_driver_init+0x0/0x11 @ 1 initcall upd64083_driver_init+0x0/0x11 returned 0 after 34 usecs calling ml86v7667_i2c_driver_init+0x0/0x11 @ 1 initcall ml86v7667_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs calling au8522_driver_init+0x0/0x11 @ 1 initcall au8522_driver_init+0x0/0x11 returned 0 after 27 usecs calling flexcop_module_init+0x0/0x14 @ 1 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully initcall flexcop_module_init+0x0/0x14 returned 0 after 735 usecs calling saa7146_vv_init_module+0x0/0x7 @ 1 initcall saa7146_vv_init_module+0x0/0x7 returned 0 after 4 usecs calling smscore_module_init+0x0/0x6b @ 1 initcall smscore_module_init+0x0/0x6b returned 0 after 4 usecs calling smsdvb_module_init+0x0/0x5f @ 1 initcall smsdvb_module_init+0x0/0x5f returned 0 after 47 usecs calling budget_init+0x0/0xf @ 1 saa7146: register extension 'budget dvb' initcall budget_init+0x0/0xf returned 0 after 329 usecs calling budget_av_init+0x0/0xf @ 1 saa7146: register extension 'budget_av' initcall budget_av_init+0x0/0xf returned 0 after 1134 usecs calling av7110_init+0x0/0xf @ 1 saa7146: register extension 'av7110' initcall av7110_init+0x0/0xf returned 0 after 1603 usecs calling flexcop_pci_driver_init+0x0/0x16 @ 1 initcall flexcop_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling pluto2_driver_init+0x0/0x16 @ 1 initcall pluto2_driver_init+0x0/0x16 returned 0 after 43 usecs calling pt1_driver_init+0x0/0x16 @ 1 initcall pt1_driver_init+0x0/0x16 returned 0 after 37 usecs calling module_init_ngene+0x0/0x23 @ 1 nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas initcall module_init_ngene+0x0/0x23 returned 0 after 443 usecs calling module_init_ddbridge+0x0/0xa1 @ 1 Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH initcall module_init_ddbridge+0x0/0xa1 returned 0 after 927 usecs calling cx25821_init+0x0/0x3d @ 1 cx25821: driver version 0.0.106 loaded initcall cx25821_init+0x0/0x3d returned 0 after 963 usecs calling ttusb_dec_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ttusb-dec initcall ttusb_dec_driver_init+0x0/0x16 returned 0 after 1010 usecs calling ttusb_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ttusb initcall ttusb_driver_init+0x0/0x16 returned 0 after 331 usecs calling au0828_init+0x0/0xb5 @ 1 au0828 driver loaded usbcore: registered new interface driver au0828 initcall au0828_init+0x0/0xb5 returned 0 after 2289 usecs calling smssdio_module_init+0x0/0x28 @ 1 smssdio: Siano SMS1xxx SDIO driver smssdio: Copyright Pierre Ossman initcall smssdio_module_init+0x0/0x28 returned 0 after 2140 usecs calling pps_ktimer_init+0x0/0x92 @ 1 usb 2-1: new high-speed USB device number 2 using dummy_hcd pps pps0: new PPS source ktimer pps pps0: ktimer PPS source registered initcall pps_ktimer_init+0x0/0x92 returned 0 after 3272 usecs calling pps_tty_init+0x0/0x94 @ 1 pps_ldisc: PPS line discipline registered initcall pps_tty_init+0x0/0x94 returned 0 after 460 usecs calling pps_gpio_driver_init+0x0/0x11 @ 1 initcall pps_gpio_driver_init+0x0/0x11 returned 0 after 63 usecs calling pda_power_pdrv_init+0x0/0x11 @ 1 initcall pda_power_pdrv_init+0x0/0x11 returned 0 after 38 usecs calling wm8350_power_driver_init+0x0/0x11 @ 1 initcall wm8350_power_driver_init+0x0/0x11 returned 0 after 31 usecs calling pm860x_battery_driver_init+0x0/0x11 @ 1 initcall pm860x_battery_driver_init+0x0/0x11 returned 0 after 31 usecs calling goldfish_battery_device_init+0x0/0x11 @ 1 initcall goldfish_battery_device_init+0x0/0x11 returned 0 after 31 usecs calling sbs_battery_driver_init+0x0/0x11 @ 1 initcall sbs_battery_driver_init+0x0/0x11 returned 0 after 34 usecs calling bq27x00_battery_init+0x0/0x7 @ 1 initcall bq27x00_battery_init+0x0/0x7 returned 0 after 4 usecs calling da903x_battery_driver_init+0x0/0x11 @ 1 initcall da903x_battery_driver_init+0x0/0x11 returned 0 after 31 usecs calling max17040_i2c_driver_init+0x0/0x11 @ 1 initcall max17040_i2c_driver_init+0x0/0x11 returned 0 after 45 usecs calling twl4030_madc_battery_driver_init+0x0/0x11 @ 1 initcall twl4030_madc_battery_driver_init+0x0/0x11 returned 0 after 31 usecs calling pm860x_charger_driver_init+0x0/0x11 @ 1 initcall pm860x_charger_driver_init+0x0/0x11 returned 0 after 31 usecs calling pcf50633_mbc_driver_init+0x0/0x11 @ 1 initcall pcf50633_mbc_driver_init+0x0/0x11 returned 0 after 38 usecs calling rx51_battery_driver_init+0x0/0x11 @ 1 initcall rx51_battery_driver_init+0x0/0x11 returned 0 after 31 usecs calling twl4030_bci_driver_init+0x0/0x14 @ 1 initcall twl4030_bci_driver_init+0x0/0x14 returned -19 after 49 usecs calling lp8727_driver_init+0x0/0x11 @ 1 initcall lp8727_driver_init+0x0/0x11 returned 0 after 29 usecs calling lp8788_charger_driver_init+0x0/0x11 @ 1 initcall lp8788_charger_driver_init+0x0/0x11 returned 0 after 31 usecs calling gpio_charger_driver_init+0x0/0x11 @ 1 initcall gpio_charger_driver_init+0x0/0x11 returned 0 after 46 usecs calling bq2415x_driver_init+0x0/0x11 @ 1 initcall bq2415x_driver_init+0x0/0x11 returned 0 after 29 usecs calling bq24190_driver_init+0x0/0x11 @ 1 initcall bq24190_driver_init+0x0/0x11 returned 0 after 28 usecs calling smb347_driver_init+0x0/0x11 @ 1 initcall smb347_driver_init+0x0/0x11 returned 0 after 28 usecs calling tps65090_charger_driver_init+0x0/0x11 @ 1 initcall tps65090_charger_driver_init+0x0/0x11 returned 0 after 31 usecs calling asb100_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall asb100_driver_init+0x0/0x11 returned 0 after 6270 usecs calling sensors_w83627hf_init+0x0/0x12e @ 1 initcall sensors_w83627hf_init+0x0/0x12e returned -19 after 20 usecs calling w83793_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall w83793_driver_init+0x0/0x11 returned 0 after 23535 usecs calling w83795_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! g_ncm gadget: resume dummy_hcd dummy_hcd.0: port status 0x00100503 has changes i2c i2c-1: Transaction failed (0x10)! initcall w83795_driver_init+0x0/0x11 returned 0 after 23502 usecs calling w83791d_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall w83791d_driver_init+0x0/0x11 returned 0 after 23331 usecs calling ad7418_driver_init+0x0/0x11 @ 1 initcall ad7418_driver_init+0x0/0x11 returned 0 after 30 usecs calling adm1021_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! dummy_udc dummy_udc.0: set_address = 2 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! g_ncm gadget: high-speed config #1: CDC Ethernet (NCM) g_ncm gadget: init ncm ctrl 0 dummy_udc dummy_udc.0: enabled ep5in-int (ep5in-intr) maxpacket 16 stream disabled g_ncm gadget: notify speed 425984000 g_ncm gadget: notify connect false i2c i2c-1: Transaction failed (0x10)! g_ncm gadget: ncm reqa1.80 v0000 i0000 l28 g_ncm gadget: non-CRC mode selected g_ncm gadget: ncm req21.8a v0000 i0000 l0 i2c i2c-1: Transaction failed (0x10)! g_ncm gadget: NCM16 selected g_ncm gadget: ncm req21.84 v0000 i0000 l0 g_ncm gadget: init ncm g_ncm gadget: activate ncm dummy_udc dummy_udc.0: enabled ep1in-bulk (ep1in-bulk) maxpacket 512 stream disabled dummy_udc dummy_udc.0: enabled ep2out-bulk (ep2out-bulk) maxpacket 512 stream disabled usb0: qlen 10 g_ncm gadget: ncm_close i2c i2c-1: Transaction failed (0x10)! usb 2-1: MAC-Address: aa:99:de:d4:76:38 cdc_ncm 2-1:1.0 usb1: register 'cdc_ncm' at usb-dummy_hcd.0-1, CDC NCM, aa:99:de:d4:76:38 i2c i2c-1: Transaction failed (0x10)! initcall adm1021_driver_init+0x0/0x11 returned 0 after 58900 usecs calling adm1025_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adm1025_driver_init+0x0/0x11 returned 0 after 17304 usecs calling adm1026_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adm1026_driver_init+0x0/0x11 returned 0 after 17313 usecs calling adm1029_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adm1029_driver_init+0x0/0x11 returned 0 after 46601 usecs calling adm9240_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adm9240_driver_init+0x0/0x11 returned 0 after 23163 usecs calling ads1015_driver_init+0x0/0x11 @ 1 initcall ads1015_driver_init+0x0/0x11 returned 0 after 29 usecs calling ads7828_driver_init+0x0/0x11 @ 1 initcall ads7828_driver_init+0x0/0x11 returned 0 after 28 usecs calling adt7410_driver_init+0x0/0x11 @ 1 initcall adt7410_driver_init+0x0/0x11 returned 0 after 28 usecs calling adt7411_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adt7411_driver_init+0x0/0x11 returned 0 after 18023 usecs calling adt7462_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adt7462_driver_init+0x0/0x11 returned 0 after 11450 usecs calling adt7470_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adt7470_driver_init+0x0/0x11 returned 0 after 17303 usecs calling adt7475_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall adt7475_driver_init+0x0/0x11 returned 0 after 17313 usecs calling applesmc_init+0x0/0x2d @ 1 applesmc: supported laptop not found! applesmc: driver init failed (ret=-19)! initcall applesmc_init+0x0/0x2d returned -19 after 1859 usecs calling sm_asc7621_init+0x0/0x73 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall sm_asc7621_init+0x0/0x73 returned 0 after 17720 usecs calling atxp1_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall atxp1_driver_init+0x0/0x11 returned 0 after 11487 usecs calling coretemp_init+0x0/0x183 @ 1 initcall coretemp_init+0x0/0x183 returned -19 after 4 usecs calling dme1737_init+0x0/0x155 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall dme1737_init+0x0/0x155 returned 0 after 17503 usecs calling ds620_driver_init+0x0/0x11 @ 1 initcall ds620_driver_init+0x0/0x11 returned 0 after 29 usecs calling ds1621_driver_init+0x0/0x11 @ 1 initcall ds1621_driver_init+0x0/0x11 returned 0 after 29 usecs calling emc2103_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall emc2103_driver_init+0x0/0x11 returned 0 after 6152 usecs calling f71882fg_init+0x0/0x114 @ 1 initcall f71882fg_init+0x0/0x114 returned -19 after 31 usecs calling f75375_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall f75375_driver_init+0x0/0x11 returned 0 after 12401 usecs calling fam15h_power_driver_init+0x0/0x16 @ 1 initcall fam15h_power_driver_init+0x0/0x16 returned 0 after 61 usecs calling fschmd_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall fschmd_driver_init+0x0/0x11 returned 0 after 6430 usecs calling g760a_driver_init+0x0/0x11 @ 1 initcall g760a_driver_init+0x0/0x11 returned 0 after 30 usecs calling gl520_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall gl520_driver_init+0x0/0x11 returned 0 after 12063 usecs calling hih6130_driver_init+0x0/0x11 @ 1 initcall hih6130_driver_init+0x0/0x11 returned 0 after 30 usecs calling htu21_driver_init+0x0/0x11 @ 1 initcall htu21_driver_init+0x0/0x11 returned 0 after 28 usecs calling i5k_amb_init+0x0/0x56 @ 1 initcall i5k_amb_init+0x0/0x56 returned 0 after 201 usecs calling aem_init+0x0/0x43 @ 1 initcall aem_init+0x0/0x43 returned 0 after 32 usecs calling iio_hwmon_driver_init+0x0/0x11 @ 1 initcall iio_hwmon_driver_init+0x0/0x11 returned 0 after 32 usecs calling ina2xx_driver_init+0x0/0x11 @ 1 initcall ina2xx_driver_init+0x0/0x11 returned 0 after 37 usecs calling sm_it87_init+0x0/0x5ab @ 1 it87: Found IT8712F chip at 0x290, revision 7 it87: VID is disabled (pins used for GPIO) it87 it87.656: Detected broken BIOS defaults, disabling PWM interface initcall sm_it87_init+0x0/0x5ab returned 0 after 3399 usecs calling k10temp_driver_init+0x0/0x16 @ 1 initcall k10temp_driver_init+0x0/0x16 returned 0 after 47 usecs calling pem_driver_init+0x0/0x11 @ 1 initcall pem_driver_init+0x0/0x11 returned 0 after 31 usecs calling lm63_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall lm63_driver_init+0x0/0x11 returned 0 after 17458 usecs calling lm73_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall lm73_driver_init+0x0/0x11 returned 0 after 34924 usecs calling lm77_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall lm77_driver_init+0x0/0x11 returned 0 after 23204 usecs calling sm_lm78_init+0x0/0x393 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall sm_lm78_init+0x0/0x393 returned 0 after 47151 usecs calling lm80_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall lm80_driver_init+0x0/0x11 returned 0 after 47142 usecs calling lm95234_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall lm95234_driver_init+0x0/0x11 returned 0 after 17820 usecs calling ltc4245_driver_init+0x0/0x11 @ 1 initcall ltc4245_driver_init+0x0/0x11 returned 0 after 30 usecs calling max16065_driver_init+0x0/0x11 @ 1 initcall max16065_driver_init+0x0/0x11 returned 0 after 30 usecs calling max1619_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall max1619_driver_init+0x0/0x11 returned 0 after 52588 usecs calling max1668_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall max1668_driver_init+0x0/0x11 returned 0 after 52461 usecs calling max197_driver_init+0x0/0x11 @ 1 initcall max197_driver_init+0x0/0x11 returned 0 after 36 usecs calling max6639_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall max6639_driver_init+0x0/0x11 returned 0 after 17888 usecs calling max6642_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall max6642_driver_init+0x0/0x11 returned 0 after 46603 usecs calling sensors_nct6775_init+0x0/0x323 @ 1 initcall sensors_nct6775_init+0x0/0x323 returned -19 after 90 usecs calling ntc_thermistor_driver_init+0x0/0x11 @ 1 initcall ntc_thermistor_driver_init+0x0/0x11 returned 0 after 32 usecs calling pc87360_init+0x0/0x16f @ 1 pc87360: PC8736x not detected, module not inserted initcall pc87360_init+0x0/0x16f returned -19 after 1006 usecs calling pcf8591_init+0x0/0x38 @ 1 initcall pcf8591_init+0x0/0x38 returned 0 after 31 usecs calling sht15_driver_init+0x0/0x11 @ 1 initcall sht15_driver_init+0x0/0x11 returned 0 after 34 usecs calling sm_sis5595_init+0x0/0x16 @ 1 initcall sm_sis5595_init+0x0/0x16 returned 0 after 39 usecs calling smm665_driver_init+0x0/0x11 @ 1 initcall smm665_driver_init+0x0/0x11 returned 0 after 31 usecs calling smsc47b397_init+0x0/0x167 @ 1 initcall smsc47b397_init+0x0/0x167 returned -19 after 9 usecs calling sm_smsc47m1_init+0x0/0x244 @ 1 initcall sm_smsc47m1_init+0x0/0x244 returned -19 after 9 usecs calling thmc50_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall thmc50_driver_init+0x0/0x11 returned 0 after 17778 usecs calling tmp102_driver_init+0x0/0x11 @ 1 initcall tmp102_driver_init+0x0/0x11 returned 0 after 37 usecs calling via_cputemp_init+0x0/0x12d @ 1 initcall via_cputemp_init+0x0/0x12d returned -19 after 4 usecs calling vt1211_init+0x0/0x155 @ 1 initcall vt1211_init+0x0/0x155 returned -19 after 20 usecs calling sm_vt8231_init+0x0/0x16 @ 1 initcall sm_vt8231_init+0x0/0x16 returned 0 after 38 usecs calling sensors_w83627ehf_init+0x0/0x130 @ 1 initcall sensors_w83627ehf_init+0x0/0x130 returned -19 after 34 usecs calling w83l785ts_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall w83l785ts_driver_init+0x0/0x11 returned 0 after 5585 usecs calling w83l786ng_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall w83l786ng_driver_init+0x0/0x11 returned 0 after 11919 usecs calling wm831x_hwmon_driver_init+0x0/0x11 @ 1 initcall wm831x_hwmon_driver_init+0x0/0x11 returned 0 after 41 usecs calling wm8350_hwmon_driver_init+0x0/0x11 @ 1 initcall wm8350_hwmon_driver_init+0x0/0x11 returned 0 after 32 usecs calling pmbus_driver_init+0x0/0x11 @ 1 initcall pmbus_driver_init+0x0/0x11 returned 0 after 31 usecs calling adm1275_driver_init+0x0/0x11 @ 1 initcall adm1275_driver_init+0x0/0x11 returned 0 after 30 usecs calling ltc2978_driver_init+0x0/0x11 @ 1 initcall ltc2978_driver_init+0x0/0x11 returned 0 after 31 usecs calling max16064_driver_init+0x0/0x11 @ 1 initcall max16064_driver_init+0x0/0x11 returned 0 after 36 usecs calling max34440_driver_init+0x0/0x11 @ 1 initcall max34440_driver_init+0x0/0x11 returned 0 after 30 usecs calling max8688_driver_init+0x0/0x11 @ 1 initcall max8688_driver_init+0x0/0x11 returned 0 after 29 usecs calling ucd9200_driver_init+0x0/0x11 @ 1 initcall ucd9200_driver_init+0x0/0x11 returned 0 after 29 usecs calling zl6100_driver_init+0x0/0x11 @ 1 initcall zl6100_driver_init+0x0/0x11 returned 0 after 30 usecs calling pkg_temp_thermal_init+0x0/0x4d6 @ 1 initcall pkg_temp_thermal_init+0x0/0x4d6 returned -19 after 4 usecs calling vhci_init+0x0/0x26 @ 1 Bluetooth: Virtual HCI driver ver 1.3 initcall vhci_init+0x0/0x26 returned 0 after 1846 usecs calling bfusb_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver bfusb initcall bfusb_driver_init+0x0/0x16 returned 0 after 1308 usecs calling dtl1_driver_init+0x0/0xf @ 1 initcall dtl1_driver_init+0x0/0xf returned 0 after 38 usecs calling bt3c_driver_init+0x0/0xf @ 1 initcall bt3c_driver_init+0x0/0xf returned 0 after 26 usecs calling btuart_driver_init+0x0/0xf @ 1 initcall btuart_driver_init+0x0/0xf returned 0 after 26 usecs calling btsdio_init+0x0/0x26 @ 1 Bluetooth: Generic Bluetooth SDIO driver ver 0.1 initcall btsdio_init+0x0/0x26 returned 0 after 690 usecs calling btwilink_driver_init+0x0/0x11 @ 1 initcall btwilink_driver_init+0x0/0x11 returned 0 after 35 usecs calling mmc_blk_init+0x0/0x6d @ 1 initcall mmc_blk_init+0x0/0x6d returned 0 after 27 usecs calling mmc_test_init+0x0/0xf @ 1 initcall mmc_test_init+0x0/0xf returned 0 after 40 usecs calling sdio_uart_init+0x0/0xc9 @ 1 initcall sdio_uart_init+0x0/0xc9 returned 0 after 43 usecs calling sdhci_drv_init+0x0/0x20 @ 1 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman initcall sdhci_drv_init+0x0/0x20 returned 0 after 1767 usecs calling sdhci_driver_init+0x0/0x16 @ 1 initcall sdhci_driver_init+0x0/0x16 returned 0 after 55 usecs calling goldfish_mmc_driver_init+0x0/0x11 @ 1 initcall goldfish_mmc_driver_init+0x0/0x11 returned 0 after 32 usecs calling sdricoh_driver_init+0x0/0xf @ 1 initcall sdricoh_driver_init+0x0/0xf returned 0 after 27 usecs calling ushc_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver ushc initcall ushc_driver_init+0x0/0x16 returned 0 after 1138 usecs calling rtsx_pci_sdmmc_driver_init+0x0/0x11 @ 1 initcall rtsx_pci_sdmmc_driver_init+0x0/0x11 returned 0 after 31 usecs calling sdhci_pltfm_drv_init+0x0/0x14 @ 1 sdhci-pltfm: SDHCI platform and OF driver helper initcall sdhci_pltfm_drv_init+0x0/0x14 returned 0 after 1645 usecs calling memstick_init+0x0/0x8c @ 1 initcall memstick_init+0x0/0x8c returned 0 after 141 usecs calling msb_init+0x0/0x66 @ 1 initcall msb_init+0x0/0x66 returned 0 after 25 usecs calling tifm_ms_init+0x0/0xf @ 1 initcall tifm_ms_init+0x0/0xf returned 0 after 25 usecs calling jmb38x_ms_driver_init+0x0/0x16 @ 1 initcall jmb38x_ms_driver_init+0x0/0x16 returned 0 after 46 usecs calling r852_pci_driver_init+0x0/0x16 @ 1 initcall r852_pci_driver_init+0x0/0x16 returned 0 after 45 usecs calling rtsx_pci_ms_driver_init+0x0/0x11 @ 1 initcall rtsx_pci_ms_driver_init+0x0/0x11 returned 0 after 33 usecs calling lm3533_led_driver_init+0x0/0x11 @ 1 initcall lm3533_led_driver_init+0x0/0x11 returned 0 after 31 usecs calling lm3642_i2c_driver_init+0x0/0x11 @ 1 initcall lm3642_i2c_driver_init+0x0/0x11 returned 0 after 33 usecs calling pca9532_driver_init+0x0/0x11 @ 1 initcall pca9532_driver_init+0x0/0x11 returned 0 after 31 usecs calling gpio_led_driver_init+0x0/0x11 @ 1 initcall gpio_led_driver_init+0x0/0x11 returned 0 after 32 usecs calling lp5523_driver_init+0x0/0x11 @ 1 initcall lp5523_driver_init+0x0/0x11 returned 0 after 30 usecs calling lp8501_driver_init+0x0/0x11 @ 1 initcall lp8501_driver_init+0x0/0x11 returned 0 after 36 usecs calling tca6507_driver_init+0x0/0x11 @ 1 initcall tca6507_driver_init+0x0/0x11 returned 0 after 30 usecs calling ot200_led_driver_init+0x0/0x11 @ 1 initcall ot200_led_driver_init+0x0/0x11 returned 0 after 32 usecs calling pca963x_driver_init+0x0/0x11 @ 1 initcall pca963x_driver_init+0x0/0x11 returned 0 after 31 usecs calling da903x_led_driver_init+0x0/0x11 @ 1 initcall da903x_led_driver_init+0x0/0x11 returned 0 after 33 usecs calling wm8350_led_driver_init+0x0/0x11 @ 1 initcall wm8350_led_driver_init+0x0/0x11 returned 0 after 33 usecs calling led_pwm_driver_init+0x0/0x11 @ 1 initcall led_pwm_driver_init+0x0/0x11 returned 0 after 31 usecs calling regulator_led_driver_init+0x0/0x11 @ 1 initcall regulator_led_driver_init+0x0/0x11 returned 0 after 91 usecs calling lt3593_led_driver_init+0x0/0x11 @ 1 initcall lt3593_led_driver_init+0x0/0x11 returned 0 after 50 usecs calling lm355x_i2c_driver_init+0x0/0x11 @ 1 initcall lm355x_i2c_driver_init+0x0/0x11 returned 0 after 46 usecs calling blinkm_driver_init+0x0/0x11 @ 1 i2c i2c-0: Transaction failed (0x10)! i2c i2c-1: Transaction failed (0x10)! initcall blinkm_driver_init+0x0/0x11 returned 0 after 5914 usecs calling timer_trig_init+0x0/0xf @ 1 initcall timer_trig_init+0x0/0xf returned 0 after 45 usecs calling heartbeat_trig_init+0x0/0x32 @ 1 initcall heartbeat_trig_init+0x0/0x32 returned 0 after 6 usecs calling bl_trig_init+0x0/0xf @ 1 initcall bl_trig_init+0x0/0xf returned 0 after 4 usecs calling gpio_trig_init+0x0/0xf @ 1 initcall gpio_trig_init+0x0/0xf returned 0 after 4 usecs calling ledtrig_cpu_init+0x0/0x53 @ 1 ledtrig-cpu: registered to indicate activity on CPUs initcall ledtrig_cpu_init+0x0/0x53 returned 0 after 369 usecs calling transient_trig_init+0x0/0xf @ 1 initcall transient_trig_init+0x0/0xf returned 0 after 4 usecs calling ledtrig_camera_init+0x0/0x25 @ 1 initcall ledtrig_camera_init+0x0/0x25 returned 0 after 5 usecs calling ib_core_init+0x0/0xa8 @ 1 initcall ib_core_init+0x0/0xa8 returned 0 after 71 usecs calling ib_mad_init_module+0x0/0xca @ 1 initcall ib_mad_init_module+0x0/0xca returned 0 after 42 usecs calling ib_sa_init+0x0/0x59 @ 1 initcall ib_sa_init+0x0/0x59 returned 0 after 80 usecs calling ib_cm_init+0x0/0x152 @ 1 initcall ib_cm_init+0x0/0x152 returned 0 after 94 usecs calling iw_cm_init+0x0/0x49 @ 1 initcall iw_cm_init+0x0/0x49 returned 0 after 58 usecs calling addr_init+0x0/0x58 @ 1 initcall addr_init+0x0/0x58 returned 0 after 76 usecs calling cma_init+0x0/0xcf @ 1 initcall cma_init+0x0/0xcf returned 0 after 98 usecs calling mthca_init+0x0/0x15f @ 1 initcall mthca_init+0x0/0x15f returned 0 after 113 usecs calling c2_pci_driver_init+0x0/0x16 @ 1 initcall c2_pci_driver_init+0x0/0x16 returned 0 after 38 usecs calling mlx4_ib_init+0x0/0x7d @ 1 initcall mlx4_ib_init+0x0/0x7d returned 0 after 116 usecs calling mlx5_ib_init+0x0/0x16 @ 1 initcall mlx5_ib_init+0x0/0x16 returned 0 after 39 usecs calling nes_init_module+0x0/0x100 @ 1 initcall nes_init_module+0x0/0x100 returned 0 after 172 usecs calling ipoib_init_module+0x0/0x122 @ 1 initcall ipoib_init_module+0x0/0x122 returned 0 after 83 usecs calling srp_init_module+0x0/0x12b @ 1 initcall srp_init_module+0x0/0x12b returned 0 after 33 usecs calling isert_init+0x0/0xd4 @ 1 initcall isert_init+0x0/0xd4 returned 0 after 26 usecs calling dcdbas_init+0x0/0x57 @ 1 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) initcall dcdbas_init+0x0/0x57 returned 0 after 562 usecs calling cs5535_mfgpt_init+0x0/0x107 @ 1 cs5535-clockevt: Could not allocate MFGPT timer initcall cs5535_mfgpt_init+0x0/0x107 returned -19 after 1488 usecs calling hid_init+0x0/0x43 @ 1 initcall hid_init+0x0/0x43 returned 0 after 56 usecs calling apple_driver_init+0x0/0x16 @ 1 initcall apple_driver_init+0x0/0x16 returned 0 after 32 usecs calling appleir_driver_init+0x0/0x16 @ 1 initcall appleir_driver_init+0x0/0x16 returned 0 after 24 usecs calling aureal_driver_init+0x0/0x16 @ 1 initcall aureal_driver_init+0x0/0x16 returned 0 after 24 usecs calling belkin_driver_init+0x0/0x16 @ 1 initcall belkin_driver_init+0x0/0x16 returned 0 after 24 usecs calling ch_driver_init+0x0/0x16 @ 1 initcall ch_driver_init+0x0/0x16 returned 0 after 37 usecs calling ch_driver_init+0x0/0x16 @ 1 initcall ch_driver_init+0x0/0x16 returned 0 after 31 usecs calling cp_driver_init+0x0/0x16 @ 1 initcall cp_driver_init+0x0/0x16 returned 0 after 24 usecs calling dr_driver_init+0x0/0x16 @ 1 initcall dr_driver_init+0x0/0x16 returned 0 after 31 usecs calling ems_driver_init+0x0/0x16 @ 1 initcall ems_driver_init+0x0/0x16 returned 0 after 24 usecs calling elecom_driver_init+0x0/0x16 @ 1 initcall elecom_driver_init+0x0/0x16 returned 0 after 33 usecs calling elo_driver_init+0x0/0x74 @ 1 initcall elo_driver_init+0x0/0x74 returned 0 after 85 usecs calling ez_driver_init+0x0/0x16 @ 1 initcall ez_driver_init+0x0/0x16 returned 0 after 24 usecs calling gyration_driver_init+0x0/0x16 @ 1 initcall gyration_driver_init+0x0/0x16 returned 0 after 24 usecs calling holtek_kbd_driver_init+0x0/0x16 @ 1 initcall holtek_kbd_driver_init+0x0/0x16 returned 0 after 24 usecs calling holtek_mouse_driver_init+0x0/0x16 @ 1 initcall holtek_mouse_driver_init+0x0/0x16 returned 0 after 26 usecs calling holtek_driver_init+0x0/0x16 @ 1 initcall holtek_driver_init+0x0/0x16 returned 0 after 31 usecs calling huion_driver_init+0x0/0x16 @ 1 initcall huion_driver_init+0x0/0x16 returned 0 after 24 usecs calling ks_driver_init+0x0/0x16 @ 1 initcall ks_driver_init+0x0/0x16 returned 0 after 24 usecs calling keytouch_driver_init+0x0/0x16 @ 1 initcall keytouch_driver_init+0x0/0x16 returned 0 after 25 usecs calling kye_driver_init+0x0/0x16 @ 1 initcall kye_driver_init+0x0/0x16 returned 0 after 24 usecs calling magicmouse_driver_init+0x0/0x16 @ 1 initcall magicmouse_driver_init+0x0/0x16 returned 0 after 24 usecs calling ms_driver_init+0x0/0x16 @ 1 initcall ms_driver_init+0x0/0x16 returned 0 after 25 usecs calling ntrig_driver_init+0x0/0x16 @ 1 initcall ntrig_driver_init+0x0/0x16 returned 0 after 48 usecs calling ortek_driver_init+0x0/0x16 @ 1 initcall ortek_driver_init+0x0/0x16 returned 0 after 24 usecs calling pl_driver_init+0x0/0x16 @ 1 initcall pl_driver_init+0x0/0x16 returned 0 after 24 usecs calling pl_driver_init+0x0/0x16 @ 1 initcall pl_driver_init+0x0/0x16 returned 0 after 25 usecs calling picolcd_driver_init+0x0/0x16 @ 1 initcall picolcd_driver_init+0x0/0x16 returned 0 after 25 usecs calling px_driver_init+0x0/0x16 @ 1 initcall px_driver_init+0x0/0x16 returned 0 after 24 usecs calling roccat_init+0x0/0x87 @ 1 initcall roccat_init+0x0/0x87 returned 0 after 7 usecs calling arvo_init+0x0/0x50 @ 1 initcall arvo_init+0x0/0x50 returned 0 after 47 usecs calling isku_init+0x0/0x50 @ 1 initcall isku_init+0x0/0x50 returned 0 after 53 usecs calling kone_init+0x0/0x50 @ 1 initcall kone_init+0x0/0x50 returned 0 after 45 usecs calling koneplus_init+0x0/0x50 @ 1 initcall koneplus_init+0x0/0x50 returned 0 after 53 usecs calling konepure_init+0x0/0x50 @ 1 initcall konepure_init+0x0/0x50 returned 0 after 46 usecs calling kovaplus_init+0x0/0x50 @ 1 initcall kovaplus_init+0x0/0x50 returned 0 after 46 usecs calling lua_driver_init+0x0/0x16 @ 1 initcall lua_driver_init+0x0/0x16 returned 0 after 24 usecs calling pyra_init+0x0/0x50 @ 1 initcall pyra_init+0x0/0x50 returned 0 after 59 usecs calling savu_init+0x0/0x50 @ 1 initcall savu_init+0x0/0x50 returned 0 after 45 usecs calling saitek_driver_init+0x0/0x16 @ 1 initcall saitek_driver_init+0x0/0x16 returned 0 after 24 usecs calling samsung_driver_init+0x0/0x16 @ 1 initcall samsung_driver_init+0x0/0x16 returned 0 after 25 usecs calling sony_driver_init+0x0/0x16 @ 1 initcall sony_driver_init+0x0/0x16 returned 0 after 24 usecs calling speedlink_driver_init+0x0/0x16 @ 1 initcall speedlink_driver_init+0x0/0x16 returned 0 after 24 usecs calling steelseries_srws1_driver_init+0x0/0x16 @ 1 initcall steelseries_srws1_driver_init+0x0/0x16 returned 0 after 25 usecs calling sp_driver_init+0x0/0x16 @ 1 initcall sp_driver_init+0x0/0x16 returned 0 after 25 usecs calling ga_driver_init+0x0/0x16 @ 1 initcall ga_driver_init+0x0/0x16 returned 0 after 31 usecs calling thingm_driver_init+0x0/0x16 @ 1 initcall thingm_driver_init+0x0/0x16 returned 0 after 24 usecs calling tm_driver_init+0x0/0x16 @ 1 initcall tm_driver_init+0x0/0x16 returned 0 after 25 usecs calling tivo_driver_init+0x0/0x16 @ 1 initcall tivo_driver_init+0x0/0x16 returned 0 after 25 usecs calling twinhan_driver_init+0x0/0x16 @ 1 initcall twinhan_driver_init+0x0/0x16 returned 0 after 24 usecs calling uclogic_driver_init+0x0/0x16 @ 1 initcall uclogic_driver_init+0x0/0x16 returned 0 after 24 usecs calling xinmo_driver_init+0x0/0x16 @ 1 initcall xinmo_driver_init+0x0/0x16 returned 0 after 25 usecs calling zp_driver_init+0x0/0x16 @ 1 initcall zp_driver_init+0x0/0x16 returned 0 after 40 usecs calling zc_driver_init+0x0/0x16 @ 1 initcall zc_driver_init+0x0/0x16 returned 0 after 26 usecs calling waltop_driver_init+0x0/0x16 @ 1 initcall waltop_driver_init+0x0/0x16 returned 0 after 24 usecs calling wiimote_hid_driver_init+0x0/0x16 @ 1 initcall wiimote_hid_driver_init+0x0/0x16 returned 0 after 25 usecs calling sensor_hub_driver_init+0x0/0x16 @ 1 initcall sensor_hub_driver_init+0x0/0x16 returned 0 after 25 usecs calling hid_init+0x0/0x45 @ 1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0x45 returned 0 after 1520 usecs calling vhost_net_init+0x0/0x20 @ 1 initcall vhost_net_init+0x0/0x20 returned 0 after 99 usecs calling vhost_init+0x0/0x7 @ 1 initcall vhost_init+0x0/0x7 returned 0 after 4 usecs calling hdaps_init+0x0/0x2d @ 1 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! initcall hdaps_init+0x0/0x2d returned -19 after 2795 usecs calling goldfish_pdev_bus_driver_init+0x0/0x11 @ 1 goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO. goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16 initcall goldfish_pdev_bus_driver_init+0x0/0x11 returned 0 after 2272 usecs calling hid_accel_3d_platform_driver_init+0x0/0x11 @ 1 initcall hid_accel_3d_platform_driver_init+0x0/0x11 returned 0 after 32 usecs calling st_accel_driver_init+0x0/0x11 @ 1 initcall st_accel_driver_init+0x0/0x11 returned 0 after 45 usecs calling exynos_adc_driver_init+0x0/0x11 @ 1 initcall exynos_adc_driver_init+0x0/0x11 returned 0 after 48 usecs calling lp8788_adc_driver_init+0x0/0x11 @ 1 initcall lp8788_adc_driver_init+0x0/0x11 returned 0 after 32 usecs calling max1363_driver_init+0x0/0x11 @ 1 initcall max1363_driver_init+0x0/0x11 returned 0 after 32 usecs calling tiadc_driver_init+0x0/0x11 @ 1 initcall tiadc_driver_init+0x0/0x11 returned 0 after 32 usecs calling twl6030_gpadc_driver_init+0x0/0x11 @ 1 initcall twl6030_gpadc_driver_init+0x0/0x11 returned 0 after 33 usecs calling vprbrd_adc_driver_init+0x0/0x11 @ 1 initcall vprbrd_adc_driver_init+0x0/0x11 returned 0 after 45 usecs calling ad5380_spi_init+0x0/0x11 @ 1 initcall ad5380_spi_init+0x0/0x11 returned 0 after 31 usecs calling ad5446_init+0x0/0x11 @ 1 initcall ad5446_init+0x0/0x11 returned 0 after 30 usecs calling mcp4725_driver_init+0x0/0x11 @ 1 initcall mcp4725_driver_init+0x0/0x11 returned 0 after 29 usecs calling hid_gyro_3d_platform_driver_init+0x0/0x11 @ 1 initcall hid_gyro_3d_platform_driver_init+0x0/0x11 returned 0 after 34 usecs calling itg3200_driver_init+0x0/0x11 @ 1 initcall itg3200_driver_init+0x0/0x11 returned 0 after 31 usecs calling st_gyro_driver_init+0x0/0x11 @ 1 initcall st_gyro_driver_init+0x0/0x11 returned 0 after 29 usecs calling inv_mpu_driver_init+0x0/0x11 @ 1 initcall inv_mpu_driver_init+0x0/0x11 returned 0 after 29 usecs calling adjd_s311_driver_init+0x0/0x11 @ 1 initcall adjd_s311_driver_init+0x0/0x11 returned 0 after 29 usecs calling apds9300_driver_init+0x0/0x11 @ 1 initcall apds9300_driver_init+0x0/0x11 returned 0 after 36 usecs calling hid_als_platform_driver_init+0x0/0x11 @ 1 initcall hid_als_platform_driver_init+0x0/0x11 returned 0 after 33 usecs calling vcnl4000_driver_init+0x0/0x11 @ 1 initcall vcnl4000_driver_init+0x0/0x11 returned 0 after 30 usecs calling hid_magn_3d_platform_driver_init+0x0/0x11 @ 1 initcall hid_magn_3d_platform_driver_init+0x0/0x11 returned 0 after 32 usecs calling st_magn_driver_init+0x0/0x11 @ 1 initcall st_magn_driver_init+0x0/0x11 returned 0 after 50 usecs calling st_press_driver_init+0x0/0x11 @ 1 initcall st_press_driver_init+0x0/0x11 returned 0 after 29 usecs calling iio_sysfs_trig_init+0x0/0x30 @ 1 initcall iio_sysfs_trig_init+0x0/0x30 returned 0 after 92 usecs calling vme_init+0x0/0xf @ 1 initcall vme_init+0x0/0xf returned 0 after 42 usecs calling ca91cx42_driver_init+0x0/0x16 @ 1 initcall ca91cx42_driver_init+0x0/0x16 returned 0 after 61 usecs calling tsi148_driver_init+0x0/0x16 @ 1 initcall tsi148_driver_init+0x0/0x16 returned 0 after 38 usecs calling ipack_init+0x0/0x19 @ 1 initcall ipack_init+0x0/0x19 returned 0 after 35 usecs calling tpci200_pci_drv_init+0x0/0x16 @ 1 initcall tpci200_pci_drv_init+0x0/0x16 returned 0 after 36 usecs calling fmc_init+0x0/0xf @ 1 initcall fmc_init+0x0/0xf returned 0 after 35 usecs calling t_init+0x0/0x12 @ 1 initcall t_init+0x0/0x12 returned 0 after 23 usecs calling fwe_init+0x0/0xf @ 1 initcall fwe_init+0x0/0xf returned 0 after 31 usecs calling fc_init+0x0/0xf @ 1 initcall fc_init+0x0/0xf returned 0 after 23 usecs calling sock_diag_init+0x0/0xf @ 1 initcall sock_diag_init+0x0/0xf returned 0 after 27 usecs calling flow_cache_init_global+0x0/0x10f @ 1 initcall flow_cache_init_global+0x0/0x10f returned 0 after 45 usecs calling llc_init+0x0/0x1b @ 1 initcall llc_init+0x0/0x1b returned 0 after 4 usecs calling llc2_init+0x0/0xbd @ 1 NET: Registered protocol family 26 initcall llc2_init+0x0/0xbd returned 0 after 1230 usecs calling snap_init+0x0/0x33 @ 1 initcall snap_init+0x0/0x33 returned 0 after 28 usecs calling netlink_diag_init+0x0/0xf @ 1 initcall netlink_diag_init+0x0/0xf returned 0 after 18 usecs calling nfnetlink_init+0x0/0x49 @ 1 Netfilter messages via NETLINK v0.30. initcall nfnetlink_init+0x0/0x49 returned 0 after 779 usecs calling nfnl_acct_init+0x0/0x37 @ 1 nfnl_acct: registering with nfnetlink. initcall nfnl_acct_init+0x0/0x37 returned 0 after 943 usecs calling nfnetlink_queue_init+0x0/0x7b @ 1 initcall nfnetlink_queue_init+0x0/0x7b returned 0 after 27 usecs calling nfnetlink_log_init+0x0/0x9c @ 1 initcall nfnetlink_log_init+0x0/0x9c returned 0 after 40 usecs calling nf_conntrack_standalone_init+0x0/0x6e @ 1 nf_conntrack version 0.5.0 (15637 buckets, 62548 max) initcall nf_conntrack_standalone_init+0x0/0x6e returned 0 after 745 usecs calling nf_conntrack_proto_sctp_init+0x0/0x51 @ 1 initcall nf_conntrack_proto_sctp_init+0x0/0x51 returned 0 after 57 usecs calling ctnetlink_init+0x0/0x92 @ 1 ctnetlink v0.93: registering with nfnetlink. initcall ctnetlink_init+0x0/0x92 returned 0 after 984 usecs calling nf_conntrack_amanda_init+0x0/0x90 @ 1 initcall nf_conntrack_amanda_init+0x0/0x90 returned 0 after 22 usecs calling nf_conntrack_ftp_init+0x0/0x1bc @ 1 initcall nf_conntrack_ftp_init+0x0/0x1bc returned 0 after 87 usecs calling nf_conntrack_h323_init+0x0/0xe0 @ 1 initcall nf_conntrack_h323_init+0x0/0xe0 returned 0 after 86 usecs calling nf_conntrack_irc_init+0x0/0x155 @ 1 initcall nf_conntrack_irc_init+0x0/0x155 returned 0 after 86 usecs calling nf_conntrack_snmp_init+0x0/0x19 @ 1 initcall nf_conntrack_snmp_init+0x0/0x19 returned 0 after 4 usecs calling nf_conntrack_sane_init+0x0/0x1b6 @ 1 initcall nf_conntrack_sane_init+0x0/0x1b6 returned 0 after 85 usecs calling nf_conntrack_sip_init+0x0/0x1e1 @ 1 initcall nf_conntrack_sip_init+0x0/0x1e1 returned 0 after 5 usecs calling synproxy_core_init+0x0/0x37 @ 1 initcall synproxy_core_init+0x0/0x37 returned 0 after 31 usecs calling xt_init+0x0/0x8d @ 1 initcall xt_init+0x0/0x8d returned 0 after 13 usecs calling tcpudp_mt_init+0x0/0x14 @ 1 initcall tcpudp_mt_init+0x0/0x14 returned 0 after 28 usecs calling mark_mt_init+0x0/0x37 @ 1 initcall mark_mt_init+0x0/0x37 returned 0 after 4 usecs calling connmark_mt_init+0x0/0x37 @ 1 initcall connmark_mt_init+0x0/0x37 returned 0 after 4 usecs calling audit_tg_init+0x0/0x14 @ 1 initcall audit_tg_init+0x0/0x14 returned 0 after 4 usecs calling checksum_tg_init+0x0/0xf @ 1 initcall checksum_tg_init+0x0/0xf returned 0 after 4 usecs calling classify_tg_init+0x0/0x14 @ 1 initcall classify_tg_init+0x0/0x14 returned 0 after 4 usecs calling xt_ct_tg_init+0x0/0x3c @ 1 initcall xt_ct_tg_init+0x0/0x3c returned 0 after 4 usecs calling dscp_tg_init+0x0/0x14 @ 1 initcall dscp_tg_init+0x0/0x14 returned 0 after 4 usecs calling hl_tg_init+0x0/0x14 @ 1 initcall hl_tg_init+0x0/0x14 returned 0 after 4 usecs calling hmark_tg_init+0x0/0x14 @ 1 initcall hmark_tg_init+0x0/0x14 returned 0 after 4 usecs calling led_tg_init+0x0/0xf @ 1 initcall led_tg_init+0x0/0xf returned 0 after 4 usecs calling log_tg_init+0x0/0x5a @ 1 initcall log_tg_init+0x0/0x5a returned 0 after 6 usecs calling nflog_tg_init+0x0/0xf @ 1 initcall nflog_tg_init+0x0/0xf returned 0 after 4 usecs calling nfqueue_tg_init+0x0/0x14 @ 1 initcall nfqueue_tg_init+0x0/0x14 returned 0 after 4 usecs calling xt_rateest_tg_init+0x0/0x22 @ 1 initcall xt_rateest_tg_init+0x0/0x22 returned 0 after 4 usecs calling secmark_tg_init+0x0/0xf @ 1 initcall secmark_tg_init+0x0/0xf returned 0 after 4 usecs calling tproxy_tg_init+0x0/0x1e @ 1 initcall tproxy_tg_init+0x0/0x1e returned 0 after 4 usecs calling tcpmss_tg_init+0x0/0x14 @ 1 initcall tcpmss_tg_init+0x0/0x14 returned 0 after 4 usecs calling tcpoptstrip_tg_init+0x0/0x14 @ 1 initcall tcpoptstrip_tg_init+0x0/0x14 returned 0 after 4 usecs calling tee_tg_init+0x0/0x14 @ 1 initcall tee_tg_init+0x0/0x14 returned 0 after 4 usecs calling trace_tg_init+0x0/0xf @ 1 initcall trace_tg_init+0x0/0xf returned 0 after 4 usecs calling idletimer_tg_init+0x0/0xfb @ 1 initcall idletimer_tg_init+0x0/0xfb returned 0 after 111 usecs calling xt_cluster_mt_init+0x0/0xf @ 1 initcall xt_cluster_mt_init+0x0/0xf returned 0 after 4 usecs calling connbytes_mt_init+0x0/0xf @ 1 initcall connbytes_mt_init+0x0/0xf returned 0 after 4 usecs calling connlabel_mt_init+0x0/0xf @ 1 initcall connlabel_mt_init+0x0/0xf returned 0 after 4 usecs calling connlimit_mt_init+0x0/0xf @ 1 initcall connlimit_mt_init+0x0/0xf returned 0 after 4 usecs calling conntrack_mt_init+0x0/0x14 @ 1 initcall conntrack_mt_init+0x0/0x14 returned 0 after 4 usecs calling ecn_mt_init+0x0/0x14 @ 1 initcall ecn_mt_init+0x0/0x14 returned 0 after 4 usecs calling hashlimit_mt_init+0x0/0x88 @ 1 initcall hashlimit_mt_init+0x0/0x88 returned 0 after 76 usecs calling helper_mt_init+0x0/0xf @ 1 initcall helper_mt_init+0x0/0xf returned 0 after 4 usecs calling hl_mt_init+0x0/0x14 @ 1 initcall hl_mt_init+0x0/0x14 returned 0 after 4 usecs calling iprange_mt_init+0x0/0x14 @ 1 initcall iprange_mt_init+0x0/0x14 returned 0 after 4 usecs calling ipvs_mt_init+0x0/0xf @ 1 initcall ipvs_mt_init+0x0/0xf returned 0 after 4 usecs calling limit_mt_init+0x0/0xf @ 1 initcall limit_mt_init+0x0/0xf returned 0 after 4 usecs calling multiport_mt_init+0x0/0x14 @ 1 initcall multiport_mt_init+0x0/0x14 returned 0 after 4 usecs calling nfacct_mt_init+0x0/0xf @ 1 initcall nfacct_mt_init+0x0/0xf returned 0 after 4 usecs calling owner_mt_init+0x0/0xf @ 1 initcall owner_mt_init+0x0/0xf returned 0 after 4 usecs calling pkttype_mt_init+0x0/0xf @ 1 initcall pkttype_mt_init+0x0/0xf returned 0 after 4 usecs calling quota_mt_init+0x0/0xf @ 1 initcall quota_mt_init+0x0/0xf returned 0 after 4 usecs calling xt_rateest_mt_init+0x0/0xf @ 1 initcall xt_rateest_mt_init+0x0/0xf returned 0 after 4 usecs calling realm_mt_init+0x0/0xf @ 1 initcall realm_mt_init+0x0/0xf returned 0 after 4 usecs calling string_mt_init+0x0/0xf @ 1 initcall string_mt_init+0x0/0xf returned 0 after 4 usecs calling tcpmss_mt_init+0x0/0x14 @ 1 initcall tcpmss_mt_init+0x0/0x14 returned 0 after 4 usecs calling time_mt_init+0x0/0x57 @ 1 xt_time: kernel timezone is -0000 initcall time_mt_init+0x0/0x57 returned 0 after 1059 usecs calling u32_mt_init+0x0/0xf @ 1 initcall u32_mt_init+0x0/0xf returned 0 after 4 usecs calling ip_vs_init+0x0/0xe4 @ 1 IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: Creating netns size=1100 id=0 IPVS: ipvs loaded. initcall ip_vs_init+0x0/0xe4 returned 0 after 5198 usecs calling ip_vs_wrr_init+0x0/0xf @ 1 IPVS: [wrr] scheduler registered. initcall ip_vs_wrr_init+0x0/0xf returned 0 after 83 usecs calling ip_vs_lc_init+0x0/0xf @ 1 IPVS: [lc] scheduler registered. initcall ip_vs_lc_init+0x0/0xf returned 0 after 889 usecs calling ip_vs_lblc_init+0x0/0x33 @ 1 IPVS: [lblc] scheduler registered. initcall ip_vs_lblc_init+0x0/0x33 returned 0 after 1230 usecs calling ip_vs_lblcr_init+0x0/0x33 @ 1 IPVS: [lblcr] scheduler registered. initcall ip_vs_lblcr_init+0x0/0x33 returned 0 after 421 usecs calling ip_vs_dh_init+0x0/0xf @ 1 IPVS: [dh] scheduler registered. initcall ip_vs_dh_init+0x0/0xf returned 0 after 889 usecs calling ip_vs_sh_init+0x0/0xf @ 1 IPVS: [sh] scheduler registered. initcall ip_vs_sh_init+0x0/0xf returned 0 after 891 usecs calling ip_vs_sed_init+0x0/0xf @ 1 IPVS: [sed] scheduler registered. initcall ip_vs_sed_init+0x0/0xf returned 0 after 1059 usecs calling ip_vs_nq_init+0x0/0xf @ 1 IPVS: [nq] scheduler registered. initcall ip_vs_nq_init+0x0/0xf returned 0 after 890 usecs calling sysctl_ipv4_init+0x0/0x7a @ 1 initcall sysctl_ipv4_init+0x0/0x7a returned 0 after 64 usecs calling ipip_init+0x0/0x7e @ 1 ipip: IPv4 over IPv4 tunneling driver initcall ipip_init+0x0/0x7e returned 0 after 1085 usecs calling gre_init+0x0/0x9b @ 1 gre: GRE over IPv4 demultiplexor driver initcall gre_init+0x0/0x9b returned 0 after 1099 usecs calling vti_init+0x0/0x6f @ 1 IPv4 over IPSec tunneling driver initcall vti_init+0x0/0x6f returned 0 after 1163 usecs calling init_syncookies+0x0/0x16 @ 1 initcall init_syncookies+0x0/0x16 returned 0 after 27 usecs calling ah4_init+0x0/0x75 @ 1 initcall ah4_init+0x0/0x75 returned 0 after 17 usecs calling esp4_init+0x0/0x75 @ 1 initcall esp4_init+0x0/0x75 returned 0 after 4 usecs calling xfrm4_beet_init+0x0/0x14 @ 1 initcall xfrm4_beet_init+0x0/0x14 returned 0 after 16 usecs calling tunnel4_init+0x0/0x6d @ 1 initcall tunnel4_init+0x0/0x6d returned 0 after 4 usecs calling xfrm4_transport_init+0x0/0x14 @ 1 initcall xfrm4_transport_init+0x0/0x14 returned 0 after 4 usecs calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1 initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 4 usecs calling ipv4_netfilter_init+0x0/0xf @ 1 initcall ipv4_netfilter_init+0x0/0xf returned 0 after 16 usecs calling nf_defrag_init+0x0/0x14 @ 1 initcall nf_defrag_init+0x0/0x14 returned 0 after 10 usecs calling ip_tables_init+0x0/0x8d @ 1 ip_tables: (C) 2000-2006 Netfilter Core Team initcall ip_tables_init+0x0/0x8d returned 0 after 969 usecs calling iptable_filter_init+0x0/0x40 @ 1 initcall iptable_filter_init+0x0/0x40 returned 0 after 30 usecs calling iptable_mangle_init+0x0/0x40 @ 1 initcall iptable_mangle_init+0x0/0x40 returned 0 after 48 usecs calling iptable_raw_init+0x0/0x40 @ 1 initcall iptable_raw_init+0x0/0x40 returned 0 after 29 usecs calling iptable_security_init+0x0/0x40 @ 1 initcall iptable_security_init+0x0/0x40 returned 0 after 25 usecs calling ecn_tg_init+0x0/0xf @ 1 initcall ecn_tg_init+0x0/0xf returned 0 after 4 usecs calling synproxy_tg4_init+0x0/0x41 @ 1 initcall synproxy_tg4_init+0x0/0x41 returned 0 after 4 usecs calling ulog_tg_init+0x0/0x96 @ 1 initcall ulog_tg_init+0x0/0x96 returned 0 after 29 usecs calling inet_diag_init+0x0/0x6d @ 1 initcall inet_diag_init+0x0/0x6d returned 0 after 12 usecs calling tcp_diag_init+0x0/0xf @ 1 initcall tcp_diag_init+0x0/0xf returned 0 after 19 usecs calling cubictcp_register+0x0/0x78 @ 1 TCP: cubic registered initcall cubictcp_register+0x0/0x78 returned 0 after 982 usecs calling xfrm_user_init+0x0/0x41 @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x41 returned 0 after 932 usecs calling unix_diag_init+0x0/0xf @ 1 initcall unix_diag_init+0x0/0xf returned 0 after 4 usecs calling inet6_init+0x0/0x2f3 @ 1 NET: Registered protocol family 10 initcall inet6_init+0x0/0x2f3 returned 0 after 2596 usecs calling ah6_init+0x0/0x75 @ 1 initcall ah6_init+0x0/0x75 returned 0 after 4 usecs calling esp6_init+0x0/0x75 @ 1 initcall esp6_init+0x0/0x75 returned 0 after 4 usecs calling tunnel6_init+0x0/0x75 @ 1 initcall tunnel6_init+0x0/0x75 returned 0 after 4 usecs calling xfrm6_transport_init+0x0/0x14 @ 1 initcall xfrm6_transport_init+0x0/0x14 returned 0 after 4 usecs calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1 initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 4 usecs calling xfrm6_ro_init+0x0/0x14 @ 1 initcall xfrm6_ro_init+0x0/0x14 returned 0 after 4 usecs calling xfrm6_beet_init+0x0/0x14 @ 1 initcall xfrm6_beet_init+0x0/0x14 returned 0 after 4 usecs calling ip6_tables_init+0x0/0x8d @ 1 ip6_tables: (C) 2000-2006 Netfilter Core Team initcall ip6_tables_init+0x0/0x8d returned 0 after 1139 usecs calling ip6table_filter_init+0x0/0x40 @ 1 initcall ip6table_filter_init+0x0/0x40 returned 0 after 33 usecs calling ip6table_mangle_init+0x0/0x40 @ 1 initcall ip6table_mangle_init+0x0/0x40 returned 0 after 68 usecs calling ip6table_raw_init+0x0/0x40 @ 1 initcall ip6table_raw_init+0x0/0x40 returned 0 after 24 usecs calling nf_defrag_init+0x0/0x4a @ 1 initcall nf_defrag_init+0x0/0x4a returned 0 after 50 usecs calling ah_mt6_init+0x0/0xf @ 1 initcall ah_mt6_init+0x0/0xf returned 0 after 4 usecs calling eui64_mt6_init+0x0/0xf @ 1 initcall eui64_mt6_init+0x0/0xf returned 0 after 4 usecs calling frag_mt6_init+0x0/0xf @ 1 initcall frag_mt6_init+0x0/0xf returned 0 after 4 usecs calling ipv6header_mt6_init+0x0/0xf @ 1 initcall ipv6header_mt6_init+0x0/0xf returned 0 after 4 usecs calling mh_mt6_init+0x0/0xf @ 1 initcall mh_mt6_init+0x0/0xf returned 0 after 4 usecs calling rpfilter_mt_init+0x0/0xf @ 1 initcall rpfilter_mt_init+0x0/0xf returned 0 after 4 usecs calling synproxy_tg6_init+0x0/0x41 @ 1 initcall synproxy_tg6_init+0x0/0x41 returned 0 after 4 usecs calling sit_init+0x0/0xbc @ 1 sit: IPv6 over IPv4 tunneling driver initcall sit_init+0x0/0xbc returned 0 after 1970 usecs calling ip6_tunnel_init+0x0/0xb4 @ 1 initcall ip6_tunnel_init+0x0/0xb4 returned 0 after 392 usecs calling ip6gre_init+0x0/0x98 @ 1 ip6_gre: GRE over IPv6 tunneling driver initcall ip6gre_init+0x0/0x98 returned 0 after 1477 usecs calling packet_init+0x0/0x39 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x39 returned 0 after 1248 usecs calling packet_diag_init+0x0/0xf @ 1 initcall packet_diag_init+0x0/0xf returned 0 after 4 usecs calling ipsec_pfkey_init+0x0/0x69 @ 1 NET: Registered protocol family 15 initcall ipsec_pfkey_init+0x0/0x69 returned 0 after 253 usecs calling ipx_init+0x0/0xd6 @ 1 NET: Registered protocol family 4 initcall ipx_init+0x0/0xd6 returned 0 after 1149 usecs calling atalk_init+0x0/0x78 @ 1 NET: Registered protocol family 5 initcall atalk_init+0x0/0x78 returned 0 after 1121 usecs calling x25_init+0x0/0x81 @ 1 NET: Registered protocol family 9 X.25 for Linux Version 0.2 initcall x25_init+0x0/0x81 returned 0 after 1963 usecs calling lapb_init+0x0/0x7 @ 1 initcall lapb_init+0x0/0x7 returned 0 after 4 usecs calling nr_proto_init+0x0/0x261 @ 1 NET: Registered protocol family 6 initcall nr_proto_init+0x0/0x261 returned 0 after 2061 usecs calling rose_proto_init+0x0/0x28f @ 1 NET: Registered protocol family 11 initcall rose_proto_init+0x0/0x28f returned 0 after 3669 usecs calling ax25_init+0x0/0xae @ 1 NET: Registered protocol family 3 initcall ax25_init+0x0/0xae returned 0 after 1089 usecs calling can_init+0x0/0xe5 @ 1 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 initcall can_init+0x0/0xe5 returned 0 after 1942 usecs calling bcm_module_init+0x0/0x4c @ 1 can: broadcast manager protocol (rev 20120528 t) initcall bcm_module_init+0x0/0x4c returned 0 after 697 usecs calling cgw_module_init+0x0/0x107 @ 1 can: netlink gateway (rev 20130117) max_hops=1 initcall cgw_module_init+0x0/0x107 returned 0 after 350 usecs calling irlan_init+0x0/0x255 @ 1 initcall irlan_init+0x0/0x255 returned 0 after 426 usecs calling rfcomm_init+0x0/0xe3 @ 1 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 initcall rfcomm_init+0x0/0xe3 returned 0 after 2622 usecs calling hidp_init+0x0/0x21 @ 1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized initcall hidp_init+0x0/0x21 returned 0 after 2445 usecs calling init_rpcsec_gss+0x0/0x54 @ 1 initcall init_rpcsec_gss+0x0/0x54 returned 0 after 123 usecs calling xprt_rdma_init+0x0/0xbc @ 1 RPC: Registered rdma transport module. initcall xprt_rdma_init+0x0/0xbc returned 0 after 954 usecs calling svc_rdma_init+0x0/0x193 @ 1 initcall svc_rdma_init+0x0/0x193 returned 0 after 80 usecs calling af_rxrpc_init+0x0/0x1a0 @ 1 NET: Registered protocol family 33 Key type rxrpc registered Key type rxrpc_s registered initcall af_rxrpc_init+0x0/0x1a0 returned 0 after 2949 usecs calling rxkad_init+0x0/0x2f @ 1 RxRPC: Registered security type 2 'rxkad' initcall rxkad_init+0x0/0x2f returned 0 after 1650 usecs calling atm_clip_init+0x0/0x9c @ 1 initcall atm_clip_init+0x0/0x9c returned 0 after 35 usecs calling br2684_init+0x0/0x4a @ 1 initcall br2684_init+0x0/0x4a returned 0 after 27 usecs calling lane_module_init+0x0/0x6b @ 1 lec:lane_module_init: lec.c: initialized initcall lane_module_init+0x0/0x6b returned 0 after 1270 usecs calling atm_mpoa_init+0x0/0x45 @ 1 mpoa:atm_mpoa_init: mpc.c: initialized initcall atm_mpoa_init+0x0/0x45 returned 0 after 930 usecs calling decnet_init+0x0/0x8a @ 1 NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team DECnet: Routing cache hash table of 1024 buckets, 36Kbytes NET: Registered protocol family 12 initcall decnet_init+0x0/0x8a returned 0 after 2701 usecs calling dn_rtmsg_init+0x0/0x74 @ 1 initcall dn_rtmsg_init+0x0/0x74 returned 0 after 25 usecs calling phonet_init+0x0/0x71 @ 1 NET: Registered protocol family 35 initcall phonet_init+0x0/0x71 returned 0 after 1282 usecs calling pep_register+0x0/0x14 @ 1 initcall pep_register+0x0/0x14 returned 0 after 18 usecs calling vlan_proto_init+0x0/0x88 @ 1 8021q: 802.1Q VLAN Support v1.8 initcall vlan_proto_init+0x0/0x88 returned 0 after 788 usecs calling dccp_init+0x0/0x2ec @ 1 DCCP: Activated CCID 2 (TCP-like) DCCP: Activated CCID 3 (TCP-Friendly Rate Control) initcall dccp_init+0x0/0x2ec returned 0 after 5991 usecs calling dccp_v4_init+0x0/0x70 @ 1 initcall dccp_v4_init+0x0/0x70 returned 0 after 87 usecs calling dccp_v6_init+0x0/0x70 @ 1 initcall dccp_v6_init+0x0/0x70 returned 0 after 81 usecs calling dccp_diag_init+0x0/0xf @ 1 initcall dccp_diag_init+0x0/0xf returned 0 after 4 usecs calling sctp_init+0x0/0x495 @ 1 sctp: Hash tables configured (established 32768 bind 29127) initcall sctp_init+0x0/0x495 returned 0 after 4239 usecs calling lib80211_init+0x0/0x1c @ 1 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' initcall lib80211_init+0x0/0x1c returned 0 after 2444 usecs calling lib80211_crypto_wep_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'WEP' initcall lib80211_crypto_wep_init+0x0/0xf returned 0 after 629 usecs calling lib80211_crypto_ccmp_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'CCMP' initcall lib80211_crypto_ccmp_init+0x0/0xf returned 0 after 799 usecs calling lib80211_crypto_tkip_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'TKIP' initcall lib80211_crypto_tkip_init+0x0/0xf returned 0 after 1773 usecs calling tipc_init+0x0/0xee @ 1 tipc: Activated (version 2.0.0) NET: Registered protocol family 30 tipc: Started in single node mode initcall tipc_init+0x0/0xee returned 0 after 4563 usecs calling init_p9+0x0/0x1e @ 1 9pnet: Installing 9P2000 support initcall init_p9+0x0/0x1e returned 0 after 1881 usecs calling p9_virtio_init+0x0/0x2d @ 1 initcall p9_virtio_init+0x0/0x2d returned 0 after 38 usecs calling p9_trans_rdma_init+0x0/0x11 @ 1 initcall p9_trans_rdma_init+0x0/0x11 returned 0 after 4 usecs calling dcbnl_init+0x0/0x5e @ 1 initcall dcbnl_init+0x0/0x5e returned 0 after 4 usecs calling af_ieee802154_init+0x0/0x63 @ 1 NET: Registered protocol family 36 initcall af_ieee802154_init+0x0/0x63 returned 0 after 1230 usecs calling lowpan_init_module+0x0/0x47 @ 1 initcall lowpan_init_module+0x0/0x47 returned 0 after 18 usecs calling wimax_subsys_init+0x0/0x231 @ 1 initcall wimax_subsys_init+0x0/0x231 returned 0 after 62 usecs calling init_dns_resolver+0x0/0xce @ 1 Key type dns_resolver registered initcall init_dns_resolver+0x0/0xce returned 0 after 891 usecs calling init_ceph_lib+0x0/0x6d @ 1 Key type ceph registered libceph: loaded (mon/osd proto 15/24) initcall init_ceph_lib+0x0/0x6d returned 0 after 2249 usecs calling vmci_transport_init+0x0/0x121 @ 1 NET: Registered protocol family 40 initcall vmci_transport_init+0x0/0x121 returned 0 after 1296 usecs calling mpls_gso_init+0x0/0x28 @ 1 mpls_gso: MPLS GSO support initcall mpls_gso_init+0x0/0x28 returned 0 after 852 usecs calling mcheck_init_device+0x0/0x20d @ 1 initcall mcheck_init_device+0x0/0x20d returned -5 after 4 usecs calling mcheck_debugfs_init+0x0/0x3e @ 1 initcall mcheck_debugfs_init+0x0/0x3e returned 0 after 45 usecs calling severities_debugfs_init+0x0/0x40 @ 1 initcall severities_debugfs_init+0x0/0x40 returned 0 after 23 usecs calling lapic_insert_resource+0x0/0x34 @ 1 initcall lapic_insert_resource+0x0/0x34 returned -1 after 4 usecs calling io_apic_bug_finalize+0x0/0x1a @ 1 initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 4 usecs calling print_ICs+0x0/0x40d @ 1 printing PIC contents printing PIC contents ... PIC IMR: 3618 ... PIC IRR: 0001 ... PIC ISR: 0000 ... PIC ELCR: 0828 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00000000 ... APIC TASKPRI: 00000000 (00) ... APIC RRR: 00000000 ... APIC LDR: 00000000 ... APIC DFR: 00000000 ... APIC SPIV: 00000000 ... APIC ISR field: 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... APIC ICR: 00000000 ... APIC ICR2: 00000000 ... APIC LVTT: 00000000 ... APIC LVT0: 00000000 ... APIC LVT1: 00000000 ... APIC TMICT: 00000000 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000000 number of MP IRQ sources: 0. testing the IO APIC....................... IRQ to pin mappings: .................................... done. initcall print_ICs+0x0/0x40d returned 0 after 8887 usecs calling print_ipi_mode+0x0/0x2e @ 1 Using IPI Shortcut mode initcall print_ipi_mode+0x0/0x2e returned 0 after 1320 usecs calling check_early_ioremap_leak+0x0/0x54 @ 1 initcall check_early_ioremap_leak+0x0/0x54 returned 0 after 4 usecs calling pat_memtype_list_init+0x0/0x3a @ 1 initcall pat_memtype_list_init+0x0/0x3a returned 0 after 16 usecs calling init_oops_id+0x0/0x3b @ 1 initcall init_oops_id+0x0/0x3b returned 0 after 4 usecs calling sched_init_debug+0x0/0x2a @ 1 initcall sched_init_debug+0x0/0x2a returned 0 after 14 usecs calling pm_qos_power_init+0x0/0x5b @ 1 initcall pm_qos_power_init+0x0/0x5b returned 0 after 216 usecs calling pm_debugfs_init+0x0/0x2a @ 1 initcall pm_debugfs_init+0x0/0x2a returned 0 after 15 usecs calling printk_late_init+0x0/0x4c @ 1 initcall printk_late_init+0x0/0x4c returned 0 after 4 usecs calling tk_debug_sleep_time_init+0x0/0x41 @ 1 initcall tk_debug_sleep_time_init+0x0/0x41 returned 0 after 14 usecs calling test_ringbuffer+0x0/0x448 @ 1 Running ring buffer tests... finished CPU 0: events: 5000 dropped bytes: 0 alloced bytes: 389428 written bytes: 382036 biggest event: 23 smallest event: 0 read events: 5000 lost events: 0 total events: 5000 recorded len bytes: 389428 recorded size bytes: 382036 Ring buffer PASSED! initcall test_ringbuffer+0x0/0x448 returned 0 after 9780917 usecs calling clear_boot_tracer+0x0/0x30 @ 1 initcall clear_boot_tracer+0x0/0x30 returned 0 after 4 usecs calling set_recommended_min_free_kbytes+0x0/0x6d @ 1 initcall set_recommended_min_free_kbytes+0x0/0x6d returned 0 after 72 usecs calling afs_init+0x0/0x169 @ 1 kAFS: Red Hat AFS client v0.1 registering. initcall afs_init+0x0/0x169 returned 0 after 2198 usecs calling init_trusted+0x0/0xa8 @ 1 Key type trusted registered initcall init_trusted+0x0/0xa8 returned 0 after 1302 usecs calling init_encrypted+0x0/0xfa @ 1 Key type encrypted registered initcall init_encrypted+0x0/0xfa returned 0 after 1961 usecs calling init_ima+0x0/0x18 @ 1 IMA: No TPM chip found, activating TPM-bypass! initcall init_ima+0x0/0x18 returned 0 after 1403 usecs calling prandom_reseed+0x0/0x55 @ 1 initcall prandom_reseed+0x0/0x55 returned 0 after 9 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 17 usecs calling pci_sysfs_init+0x0/0x48 @ 1 initcall pci_sysfs_init+0x0/0x48 returned 0 after 237 usecs calling regulator_init_complete+0x0/0x14c @ 1 initcall regulator_init_complete+0x0/0x14c returned 0 after 4 usecs calling random_int_secret_init+0x0/0x16 @ 1 initcall random_int_secret_init+0x0/0x16 returned 0 after 16 usecs calling deferred_probe_initcall+0x0/0x73 @ 1 initcall deferred_probe_initcall+0x0/0x73 returned 0 after 99 usecs calling late_resume_init+0x0/0x1bb @ 1 Magic number: 1:448:497 initcall late_resume_init+0x0/0x1bb returned 0 after 1923 usecs calling wl1273_core_init+0x0/0x29 @ 1 initcall wl1273_core_init+0x0/0x29 returned 0 after 59 usecs calling init_netconsole+0x0/0x1a3 @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1a3 returned 0 after 2078 usecs calling vxlan_init_module+0x0/0x8e @ 1 initcall vxlan_init_module+0x0/0x8e returned 0 after 38 usecs calling gpio_keys_init+0x0/0x11 @ 1 initcall gpio_keys_init+0x0/0x11 returned 0 after 77 usecs calling edd_init+0x0/0x2bd @ 1 BIOS EDD facility v0.16 2004-Jun-25, 0 devices found EDD information not available. initcall edd_init+0x0/0x2bd returned -19 after 1897 usecs calling firmware_memmap_init+0x0/0x29 @ 1 initcall firmware_memmap_init+0x0/0x29 returned 0 after 56 usecs calling tcp_congestion_default+0x0/0xf @ 1 initcall tcp_congestion_default+0x0/0xf returned 0 after 4 usecs calling tcp_fastopen_init+0x0/0x40 @ 1 initcall tcp_fastopen_init+0x0/0x40 returned 0 after 37 usecs calling ip_auto_config+0x0/0xe11 @ 1 initcall ip_auto_config+0x0/0xe11 returned 0 after 24 usecs calling initialize_hashrnd+0x0/0x16 @ 1 initcall initialize_hashrnd+0x0/0x16 returned 0 after 6 usecs async_waiting @ 1 async_continuing @ 1 after 4 usec EXT3-fs (sda1): recovery required on readonly filesystem EXT3-fs (sda1): write access will be enabled during recovery kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): recovery complete EXT3-fs (sda1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. async_waiting @ 1 async_continuing @ 1 after 4 usec debug: unmapping init [mem 0xb2d05000-0xb2dbbfff] Write protecting the kernel text: 19924k Testing CPA: Reverting b1000000-b2375000 Testing CPA: write protecting again Write protecting the kernel read-only data: 8024k Testing CPA: undo b2375000-b2b4b000 Testing CPA: write protecting again Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. INIT: version 2.86 booting BUG: unable to handle kernel BUG: unable to handle kernel paging requestpaging request at eaf10f40 at eaf10f40 IP:IP: [] task_work_run+0x52/0x87 [] task_work_run+0x52/0x87 *pde = 3fbf9067 *pde = 3fbf9067 *pte = 3af10060 *pte = 3af10060 Oops: 0000 [#1] Oops: 0000 [#1] DEBUG_PAGEALLOCDEBUG_PAGEALLOC CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484 task: eaf157a0 ti: eacf2000 task.ti: eacf2000 EIP: 0060:[] EFLAGS: 00010282 CPU: 0 EIP is at task_work_run+0x52/0x87 EAX: eaf10f40 EBX: eaf13f40 ECX: 00000000 EDX: eaf10f40 ESI: eaf15a38 EDI: eaf157a0 EBP: eacf3f3c ESP: eacf3f30 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 CR0: 8005003b CR2: eaf10f40 CR3: 3acf6000 CR4: 00000690 Stack: eaf15a50 eaf15a50 eacf5dc0 eacf5dc0 eaf157a0 eaf157a0 eacf3f8c eacf3f8c b1029d1d b1029d1d 00000000 00000000 b01137a0 b01137a0 eaf157a0 eaf157a0 eaf157a0 eaf157a0 eaf13f40 eaf13f40 00000001 00000001 00000007 00000007 eacf3f88 eacf3f88 b10cdebb b10cdebb 00000001 00000001 eacf5e10 eacf5e10 00000000 00000000 eaf13f48 eaf13f48 00000002 00000002 eaf13f40 eaf13f40 eace1d80 eace1d80 00000000 00000000 eaf157a0 eaf157a0 eacf3fa4 eacf3fa4 Call Trace: [] do_exit+0x291/0x753 [] ? vfs_write+0x11f/0x15a [] do_group_exit+0x59/0x86 [] SyS_exit_group+0x10/0x10 [] sysenter_do_call+0x12/0x2d Code:Code: ed ed dc dc b2 b2 0f 0f 45 45 c8 c8 eb eb 02 02 31 31 c9 c9 89 89 d0 d0 0f 0f b1 b1 0e 0e 39 39 c2 c2 75 75 d8 d8 85 85 d2 d2 74 74 41 41 f3 f3 90 90 8b 8b 87 87 d0 d0 02 02 00 00 00 00 85 85 c0 c0 74 74 f4 f4 31 31 db db eb eb 04 04 89 89 d3 d3 89 89 c2 c2 <8b> <8b> 02 02 85 85 c0 c0 89 89 1a 1a 75 75 f4 f4 89 89 d0 d0 ff ff 52 52 04 04 31 31 c9 c9 ba ba 7d 7d 00 00 00 00 00 00 b8 b8 EIP: [] EIP: [] task_work_run+0x52/0x87task_work_run+0x52/0x87 SS:ESP 0068:eacf3f30 SS:ESP 0068:eacf3f30 CR2: 00000000eaf10f40 ---[ end trace a7919e7f17c0a729 ]--- Fixing recursive fault but reboot is needed! CPA self-test: 4k 262128 large 0 gb 0 x 262128[b0000000-effef000] miss 0 ok.