[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.12.0-rc2-00044-gc7727a8 (kbuild@inn) (gcc version 4.8.1 (Debian 4.8.1-8) ) #616 SMP Wed Oct 9 22:19:51 CST 2013 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [c00fdab0] [ 0.000000] mpc: fdac0-fdbe4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x02bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fa00000-0x0fbfffff] [ 0.000000] [mem 0x0fa00000-0x0fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f9fffff] [ 0.000000] [mem 0x0c000000-0x0f9fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff] [ 0.000000] [mem 0x0fc00000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x02656000, 0x02656fff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128060(97%) [ 0.000000] RAMDISK: [mem 0x0fce4000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00001000-0x0fffdfff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65436 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 330 pages/cpu @cee50000 s1338752 r0 d12928 u1351680 [ 0.000000] pcpu-alloc: s1338752 r0 d12928 u1351680 alloc=330*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr ee52540 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64924 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-i007-1008/kas:dynamic_ptl:v1/.vmlinuz-c7727a852968b09a9a5756dc7c85c30287c6ada3-20131009222057-6-lkp-st01 branch=kas/dynamic_ptl/v1 BOOT_IMAGE=/kernel/i386-randconfig-i007-1008/c7727a852968b09a9a5756dc7c85c30287c6ada3/vmlinuz-3.12.0-rc2-00044-gc7727a8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 206168K/261744K available (16655K kernel code, 2367K rwdata, 5244K rodata, 2016K init, 10748K bss, 55576K reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] vmalloc : 0xd07fe000 - 0xffd33000 ( 757 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [ 0.000000] .init : 0xc19c1000 - 0xc1bb9000 (2016 kB) [ 0.000000] .data : 0xc1243fc9 - 0xc19bdfc0 (7655 kB) [ 0.000000] .text : 0xc0200000 - 0xc1243fc9 (16655 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=c0090000 soft=c0092000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3823 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2660.184 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 5320.36 BogoMIPS (lpj=2660184) [ 0.003489] pid_max: default: 32768 minimum: 301 [ 0.004115] Mount-cache hash table entries: 512 [ 0.006955] Initializing cgroup subsys devices [ 0.007043] Initializing cgroup subsys blkio [ 0.008013] Initializing cgroup subsys perf_event [ 0.009017] Initializing cgroup subsys net_prio [ 0.010180] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.010180] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.010180] tlb_flushall_shift: 6 [ 0.012449] Freeing SMP alternatives memory: 32K (c1bb9000 - c1bc1000) [ 0.017748] ACPI: Core revision 20130725 [ 0.028141] ACPI: All ACPI Tables successfully acquired [ 0.029529] Getting VERSION: 50014 [ 0.030021] Getting VERSION: 50014 [ 0.030599] Getting ID: 0 [ 0.031026] Getting ID: f000000 [ 0.031569] Getting LVT0: 8700 [ 0.032015] Getting LVT1: 8400 [ 0.032533] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.033123] enabled ExtINT on CPU#0 [ 0.036271] ENABLING IO-APIC IRQs [ 0.036839] init IO_APIC IRQs [ 0.037011] apic 0 pin 0 not connected [ 0.038037] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.039045] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.040041] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.041039] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.042039] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.044007] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.045039] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.046039] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.047039] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.048039] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.049039] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.050039] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.051039] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.052038] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.053039] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.054033] apic 0 pin 16 not connected [ 0.055007] apic 0 pin 17 not connected [ 0.056006] apic 0 pin 18 not connected [ 0.057007] apic 0 pin 19 not connected [ 0.057662] apic 0 pin 20 not connected [ 0.058006] apic 0 pin 21 not connected [ 0.059007] apic 0 pin 22 not connected [ 0.059656] apic 0 pin 23 not connected [ 0.060166] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061006] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.063311] Using local APIC timer interrupts. [ 0.063311] calibrating APIC timer ... [ 0.065000] ... lapic delta = 6250056 [ 0.065000] ... PM-Timer delta = 357958 [ 0.065000] ... PM-Timer result ok [ 0.065000] ..... delta 6250056 [ 0.065000] ..... mult: 268437861 [ 0.065000] ..... calibration result: 1000008 [ 0.065000] ..... CPU clock speed is 2659.0987 MHz. [ 0.065000] ..... host bus clock speed is 1000.0008 MHz. [ 0.065160] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.068309] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.070154] SMP alternatives: lockdep: fixing up alternatives [ 0.071034] CPU 1 irqstacks, hard=c005a000 soft=c005c000 [ 0.072006] smpboot: Booting Node 0, Processors # 1 OK [ 0.002000] Initializing CPU#1 [ 0.003000] kvm-clock: cpu 1, msr 0:fffd041, secondary cpu clock [ 0.003000] masked ExtINT on CPU#1 [ 0.088574] Brought up 2 CPUs [ 0.088547] KVM setup async PF for cpu 1 [ 0.088547] kvm-stealtime: cpu 1, msr ef9c540 [ 0.089028] ---------------- [ 0.089534] | NMI testsuite: [ 0.090000] -------------------- [ 0.090000] remote IPI: ok | [ 0.093232] local IPI: ok | [ 0.101031] -------------------- [ 0.101590] Good, all 2 testcases passed! | [ 0.102014] --------------------------------- [ 0.103056] smpboot: Total of 2 processors activated (10640.73 BogoMIPS) [ 0.108101] devtmpfs: initialized [ 0.111460] xor: measuring software checksum speed [ 0.122021] pIII_sse : 7288.000 MB/sec [ 0.132019] prefetch64-sse: 8500.000 MB/sec [ 0.132780] xor: using function: prefetch64-sse (8500.000 MB/sec) [ 0.134709] regulator-dummy: no parameters [ 0.135508] NET: Registered protocol family 16 [ 0.137763] cpuidle: using governor ladder [ 0.138014] cpuidle: using governor menu [ 0.140231] ACPI: bus type PCI registered [ 0.141517] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.142016] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0 [ 0.143012] PCI: Using configuration type 1 for base access [ 0.163273] bio: create slab at 0 [ 0.182094] raid6: mmxx1 441 MB/s [ 0.199043] raid6: mmxx2 507 MB/s [ 0.216043] raid6: sse1x1 398 MB/s [ 0.233022] raid6: sse1x2 511 MB/s [ 0.250024] raid6: sse2x1 781 MB/s [ 0.267037] raid6: sse2x2 1019 MB/s [ 0.267679] raid6: using algorithm sse2x2 (1019 MB/s) [ 0.268013] raid6: using intx1 recovery algorithm [ 0.270582] ACPI: Added _OSI(Module Device) [ 0.271017] ACPI: Added _OSI(Processor Device) [ 0.272008] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.272812] ACPI: Added _OSI(Processor Aggregator Device) [ 0.279066] ACPI: EC: Look up EC in DSDT [ 0.300479] ACPI: Interpreter enabled [ 0.301047] ACPI: (supports S0 S5) [ 0.301626] ACPI: Using IOAPIC for interrupt routing [ 0.302088] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.339046] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.340076] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.342934] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.344225] PCI host bridge to bus 0000:00 [ 0.344914] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.345016] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.347009] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.348016] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.349015] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.350126] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.353192] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.355890] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.360396] pci 0000:00:01.1: reg 0x20: [io 0xc1e0-0xc1ef] [ 0.363923] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.365703] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.366031] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.368316] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.371022] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.374015] pci 0000:00:02.0: reg 0x14: [mem 0xfebe0000-0xfebe0fff] [ 0.382033] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.384893] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 0.387013] pci 0000:00:03.0: reg 0x10: [io 0xc1c0-0xc1df] [ 0.389014] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff] [ 0.396014] pci 0000:00:03.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref] [ 0.398785] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 0.401008] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff] [ 0.403014] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f] [ 0.410015] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref] [ 0.412675] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.415007] pci 0000:00:05.0: reg 0x10: [io 0xc040-0xc07f] [ 0.417014] pci 0000:00:05.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff] [ 0.425482] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.427599] pci 0000:00:06.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.429599] pci 0000:00:06.0: reg 0x14: [mem 0xfebe3000-0xfebe3fff] [ 0.431000] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.431000] pci 0000:00:07.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.431000] pci 0000:00:07.0: reg 0x14: [mem 0xfebe4000-0xfebe4fff] [ 0.438754] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.441007] pci 0000:00:08.0: reg 0x10: [io 0xc100-0xc13f] [ 0.443015] pci 0000:00:08.0: reg 0x14: [mem 0xfebe5000-0xfebe5fff] [ 0.451610] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.453610] pci 0000:00:09.0: reg 0x10: [io 0xc140-0xc17f] [ 0.456016] pci 0000:00:09.0: reg 0x14: [mem 0xfebe6000-0xfebe6fff] [ 0.464514] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 0.466608] pci 0000:00:0a.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.469008] pci 0000:00:0a.0: reg 0x14: [mem 0xfebe7000-0xfebe7fff] [ 0.477441] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000 [ 0.479015] pci 0000:00:0b.0: reg 0x10: [mem 0xfebe8000-0xfebe800f] [ 0.485452] pci_bus 0000:00: on NUMA node 0 [ 0.489665] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.491518] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.493340] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.495221] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.496590] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.500000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.500033] ACPI: \_SB_.PCI0: notify handler is installed [ 0.502285] Found 1 acpi root devices [ 0.504535] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.505031] vgaarb: loaded [ 0.505504] vgaarb: bridge control possible 0000:00:02.0 [ 0.507195] tps65010: version 2 May 2005 [ 0.530146] tps65010: no chip? [ 0.531775] SCSI subsystem initialized [ 0.532331] Linux video capture interface: v2.00 [ 0.533125] pps_core: LinuxPPS API ver. 1 registered [ 0.534012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.535037] PTP clock support registered [ 0.538184] Advanced Linux Sound Architecture Driver Initialized. [ 0.539021] PCI: Using ACPI for IRQ routing [ 0.540022] PCI: pci_cache_line_size set to 64 bytes [ 0.541385] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.542027] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.544586] NET: Registered protocol family 23 [ 0.545143] Bluetooth: Core ver 2.16 [ 0.546066] NET: Registered protocol family 31 [ 0.547006] Bluetooth: HCI device and connection manager initialized [ 0.548045] Bluetooth: HCI socket layer initialized [ 0.549029] Bluetooth: L2CAP socket layer initialized [ 0.549936] Bluetooth: SCO socket layer initialized [ 0.550023] NET: Registered protocol family 8 [ 0.551013] NET: Registered protocol family 20 [ 0.553645] Switched to clocksource kvm-clock [ 0.554299] pnp: PnP ACPI init [ 0.554872] ACPI: bus type PNP registered [ 0.555737] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.557267] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.558504] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.560054] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.561277] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.562791] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.564130] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.565542] pnp 00:03: [dma 2] [ 0.566170] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.567564] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.569115] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.570425] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.571925] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.574251] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.576188] pnp: PnP ACPI: found 7 devices [ 0.576905] ACPI: bus type PNP unregistered [ 0.617351] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.618337] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.619305] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.620405] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.621534] NET: Registered protocol family 1 [ 0.622348] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.623391] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.624441] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.625581] pci 0000:00:02.0: Boot video device [ 0.626556] PCI: CLS 0 bytes, default 64 [ 0.627643] Unpacking initramfs... [ 0.825757] Freeing initrd memory: 3120K (cfce4000 - cfff0000) [ 2.490243] DMA-API: preallocated 65536 debug entries [ 2.491157] DMA-API: debugging enabled by kernel config [ 2.498652] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 2.499676] microcode: CPU1 sig=0xf61, pf=0x1, revision=0x1 [ 2.501399] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.505983] NatSemi SCx200 Driver [ 2.526946] Initializing RT-Tester: OK [ 2.531595] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.535838] VFS: Disk quotas dquot_6.5.2 [ 2.536763] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.543497] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.544830] NTFS driver 2.1.30 [Flags: R/W DEBUG]. [ 2.545650] QNX4 filesystem 0.2.3 registered. [ 2.546542] fuse init (API version 7.22) [ 2.550102] NILFS version 2 loaded [ 2.550686] BeFS version: 0.9.3 [ 2.551200] OCFS2 1.5.0 [ 2.552571] ocfs2: Registered cluster interface o2cb [ 2.553377] OCFS2 DLMFS 1.5.0 [ 2.554533] OCFS2 User DLM kernel interface loaded [ 2.555318] OCFS2 Node Manager 1.5.0 [ 2.561683] OCFS2 DLM 1.5.0 [ 2.562362] bio: create slab at 1 [ 2.566544] Btrfs loaded [ 2.566991] btrfs: selftest: Running btrfs free space cache tests [ 2.567963] btrfs: selftest: Running extent only tests [ 2.568849] btrfs: selftest: Running bitmap only tests [ 2.569694] btrfs: selftest: Running bitmap and extent tests [ 2.570640] btrfs: selftest: Free space cache tests finished [ 2.571616] msgmni has been set to 408 [ 2.610599] alg: No test for crc32 (crc32-table) [ 2.613320] alg: No test for lz4 (lz4-generic) [ 2.614630] alg: No test for stdrng (krng) [ 2.632529] NET: Registered protocol family 38 [ 2.633360] Key type asymmetric registered [ 2.634106] Asymmetric key parser 'x509' registered [ 2.634931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.636118] io scheduler noop registered (default) [ 2.636853] io scheduler deadline registered [ 2.637568] io scheduler cfq registered [ 2.641935] xz_dec_test: module loaded [ 2.642570] xz_dec_test: Create a device node with 'mknod xz_dec_test c 250 0' and write .xz files to it. [ 2.644099] rbtree testing [ 3.495217] tsc: Refined TSC clocksource calibration: 2659.954 MHz -> 29392 cycles [ 3.805710] augmented rbtree testing -> 42580 cycles [ 5.491406] no IO addresses supplied [ 5.492320] hgafb: HGA card not detected. [ 5.492964] hgafb: probe of hgafb.0 failed with error -22 [ 5.502909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 5.504211] ACPI: Power Button [PWRF] [ 5.972226] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 5.998632] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 6.010745] lp: driver loaded but no devices found [ 6.011919] Non-volatile memory driver v1.3 [ 6.012662] toshiba: not a supported Toshiba laptop [ 6.014042] ppdev: user-space parallel port driver [ 6.017640] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 6.021678] [drm] Initialized drm 1.1.0 20060810 [ 6.025261] parport_pc 00:04: reported by Plug and Play ACPI [ 6.026446] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 6.114928] lp0: using parport0 (interrupt-driven). [ 6.115766] lp0: console ready [ 6.120487] dummy-irq: no IRQ given. Use irq=N [ 6.121406] lkdtm: No crash points registered, enable through debugfs [ 6.125207] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 6.126647] c2port c2port0: C2 port uc added [ 6.127339] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 6.136885] Uniform Multi-Platform E-IDE driver [ 6.137782] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 6.139314] ide-gd driver 1.18 [ 6.142784] Loading iSCSI transport class v2.0-870. [ 6.144543] hp_sw: device handler registered [ 6.145325] alua: device handler registered [ 6.149775] imm: Version 2.05 (for Linux 2.4.0) [ 6.151269] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 6.152312] osst :I: Tape driver with OnStream support version 0.99.4 [ 6.152312] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 6.157139] SCSI Media Changer driver v0.25 [ 6.159279] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 6.271501] parport0: AVR Butterfly [ 6.297594] arcnet loaded. [ 6.298107] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 6.299170] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 6.300319] arcnet: raw mode (`r') encapsulation support loaded. [ 6.301273] arcnet: COM90xx chipset support [ 6.603184] S3: No ARCnet cards found. [ 6.603792] arcnet: RIM I (entirely mem-mapped) support [ 6.604616] E-mail me if you actually test the RIM I driver, please! [ 6.605608] Given: node 00h, shmem 0h, irq 0 [ 6.606290] No autoprobe for RIM I; you must specify the shmem and irq! [ 6.607366] CAN device driver interface [ 6.608083] sja1000 CAN netdevice driver [ 6.608687] sja1000_isa: insufficient parameters supplied [ 6.609627] cc770: CAN netdevice driver [ 6.610244] cc770_isa: insufficient parameters supplied [ 6.620628] NET3 PLIP version 2.4-parport gniibe@mri.co.jp [ 6.621557] plip0: Parallel port at 0x378, using IRQ 7. [ 6.622379] PPP generic driver version 2.4.2 [ 6.626459] PPP BSD Compression module registered [ 6.627274] PPP Deflate Compression module registered [ 6.628083] PPP MPPE Compression module registered [ 6.628916] parport0: cannot grant exclusive access for device ks0108 [ 6.629954] ks0108: ERROR: parport didn't register new device [ 6.630858] cfag12864b: ERROR: ks0108 is not initialized [ 6.631695] cfag12864bfb: ERROR: cfag12864b is not initialized [ 6.632780] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 6.638278] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.639220] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.647784] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 6.666903] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 6.670531] wistron_btns: System unknown [ 6.677791] rtc_cmos 00:00: RTC can wake from S4 [ 6.679211] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 6.680369] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 6.693615] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 6.697534] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 6.698809] i2c /dev entries driver [ 6.702181] i2c-parport-light: adapter type unspecified [ 6.703210] smssdio: Siano SMS1xxx SDIO driver [ 6.703895] smssdio: Copyright Pierre Ossman [ 6.704680] Driver for 1-wire Dallas network protocol. [ 6.708210] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 6.720839] applesmc: supported laptop not found! [ 6.721648] applesmc: driver init failed (ret=-19)! [ 6.722632] f71882fg: Not a Fintek device [ 6.723316] f71882fg: Not a Fintek device [ 6.735894] pc87360: PC8736x not detected, module not inserted [ 6.736903] sch56xx_common: Unsupported device id: 0xff [ 6.737749] sch56xx_common: Unsupported device id: 0xff [ 6.747689] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=1) [ 6.748939] ib700wdt: WDT driver for IB700 single board computer initialising [ 6.750327] ib700wdt: failed to register misc device [ 6.751129] ib700wdt: probe of ib700wdt failed with error -16 [ 6.752008] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 6.753240] wafer5823wdt: cannot register miscdev on minor=130 (err=-16) [ 6.754385] it87_wdt: no device [ 6.754877] pc87413_wdt: Version 1.1 at io 0x2E [ 6.755599] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 6.756635] sbc60xxwdt: cannot register miscdev on minor=130 (err=-16) [ 6.757661] sbc8360: failed to register misc device [ 6.758446] sbc7240_wdt: timeout set to 30 seconds [ 6.759203] sbc7240_wdt: cannot register miscdev on minor=130 (err=-16) [ 6.760226] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 6.762558] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 6.763556] w83627hf_wdt: WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising [ 6.765064] w83627hf_wdt: Watchdog already running. Resetting timeout to 60 sec [ 6.766232] w83627hf_wdt: cannot register miscdev on minor=130 (err=-16) [ 6.767272] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 6.768642] w83697ug_wdt: No W83697UG/UF could be found [ 6.769478] w83877f_wdt: cannot register miscdev on minor=130 (err=-16) [ 6.770510] w83977f_wdt: driver v1.00 [ 6.771107] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 6.772141] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 6.775959] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 6.776969] Modular ISDN core version 1.1.29 [ 6.778140] NET: Registered protocol family 34 [ 6.778818] DSP module 2.0 [ 6.779270] mISDN_dsp: DSP clocks every 64 samples. This equals 8 jiffies. [ 6.782985] mISDN: Layer-1-over-IP driver Rev. 2.00 [ 6.784113] 0 virtual devices registered [ 6.784740] cpufreq-nforce2: No nForce2 chipset. [ 6.788155] sdhci: Secure Digital Host Controller Interface driver [ 6.789167] sdhci: Copyright(c) Pierre Ossman [ 6.789934] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.800267] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.825691] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 6.826955] aedsp16: I/O, IRQ and DMA are mandatory [ 6.827728] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 6.828691] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 6.829873] ad1848: No ISAPnP cards found, trying standard ones... [ 6.830850] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996 [ 6.831966] I/O, IRQ, DMA and type are mandatory [ 6.832696] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996 [ 6.833859] I/O, IRQ, DMA and type are mandatory [ 6.834593] sb: Init: Starting Probe... [ 6.835258] sb: Init: Done [ 6.835726] Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc [ 6.836958] uart6850: irq and io must be set. [ 6.837653] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 6.838947] MIDI Loopback device driver [ 6.847419] NET: Registered protocol family 26 [ 6.848238] NET: Registered protocol family 17 [ 6.848955] NET: Registered protocol family 15 [ 6.849790] NET: Registered protocol family 4 [ 6.850573] NET: Registered protocol family 5 [ 6.853903] NET: Registered protocol family 9 [ 6.854658] X.25 for Linux Version 0.2 [ 6.855308] can: controller area network core (rev 20120528 abi 9) [ 6.856356] NET: Registered protocol family 29 [ 6.857063] can: raw protocol (rev 20120528) [ 6.857769] can: broadcast manager protocol (rev 20120528 t) [ 6.858673] can: netlink gateway (rev 20130117) max_hops=1 [ 6.859540] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.860387] Bluetooth: BNEP socket layer initialized [ 6.861198] lec:lane_module_init: lec.c: initialized [ 6.861979] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 6.865937] DECnet: Routing cache hash table of 256 buckets, 11Kbytes [ 6.867095] NET: Registered protocol family 12 [ 6.867855] NET: Registered protocol family 35 [ 6.871180] 8021q: 802.1Q VLAN Support v1.8 [ 6.872377] Key type dns_resolver registered [ 6.873580] openvswitch: Open vSwitch switching datapath [ 6.876291] [ 6.876291] printing PIC contents [ 6.876484] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 6.878424] ... PIC IMR: ffff [ 6.878908] ... PIC IRR: 1113 [ 6.879522] ... PIC ISR: 0000 [ 6.880142] ... PIC ELCR: 0c00 [ 6.880628] printing local APIC contents on CPU#0/0: [ 6.881113] ... APIC ID: 00000000 (0) [ 6.881113] ... APIC VERSION: 00050014 [ 6.881113] ... APIC TASKPRI: 00000000 (00) [ 6.881113] ... APIC PROCPRI: 00000000 [ 6.881113] ... APIC LDR: 01000000 [ 6.881113] ... APIC DFR: ffffffff [ 6.881113] ... APIC SPIV: 000001ff [ 6.881113] ... APIC ISR field: [ 6.881113] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.881113] ... APIC TMR field: [ 6.881113] 0000000002000000000000000000000000000000000000000000000000000000 [ 6.881113] ... APIC IRR field: [ 6.881113] 0000000000000000000000000000000000000000000000000000000000008000 [ 6.881113] ... APIC ESR: 00000000 [ 6.881113] ... APIC ICR: 000008fd [ 6.881113] ... APIC ICR2: 02000000 [ 6.881113] ... APIC LVTT: 000000ef [ 6.881113] ... APIC LVTPC: 00010000 [ 6.881113] ... APIC LVT0: 00010700 [ 6.881113] ... APIC LVT1: 00000400 [ 6.881113] ... APIC LVTERR: 000000fe [ 6.881113] ... APIC TMICT: 0000d671 [ 6.881113] ... APIC TMCCT: 00000000 [ 6.881113] ... APIC TDCR: 00000003 [ 6.881113] [ 6.897210] number of MP IRQ sources: 15. [ 6.897823] number of IO-APIC #0 registers: 24. [ 6.898552] testing the IO APIC....................... [ 6.899386] IO APIC #0...... [ 6.899833] .... register #00: 00000000 [ 6.900447] ....... : physical APIC id: 00 [ 6.901139] ....... : Delivery Type: 0 [ 6.901751] ....... : LTS : 0 [ 6.902395] .... register #01: 00170011 [ 6.902986] ....... : max redirection entries: 17 [ 6.903780] ....... : PRQ implemented: 0 [ 6.904459] ....... : IO APIC version: 11 [ 6.905149] .... register #02: 00000000 [ 6.905735] ....... : arbitration: 00 [ 6.906384] .... IRQ redirection table: [ 6.906994] 1 0 0 0 0 0 0 00 [ 6.907730] 0 0 0 0 0 1 1 31 [ 6.908466] 0 0 0 0 0 1 1 30 [ 6.909198] 0 0 0 0 0 1 1 33 [ 6.909909] 1 0 0 0 0 1 1 34 [ 6.910644] 1 1 0 0 0 1 1 35 [ 6.911377] 0 0 0 0 0 1 1 36 [ 6.912108] 0 0 0 0 0 1 1 37 [ 6.912812] 0 0 0 0 0 1 1 38 [ 6.913548] 0 1 0 0 0 1 1 39 [ 6.914288] 1 1 0 0 0 1 1 3A [ 6.914997] 1 1 0 0 0 1 1 3B [ 6.915729] 0 0 0 0 0 1 1 3C [ 6.916463] 0 0 0 0 0 1 1 3D [ 6.917193] 0 0 0 0 0 1 1 3E [ 6.917903] 0 0 0 0 0 1 1 3F [ 6.918634] 1 0 0 0 0 0 0 00 [ 6.919367] 1 0 0 0 0 0 0 00 [ 6.920097] 1 0 0 0 0 0 0 00 [ 6.920800] 1 0 0 0 0 0 0 00 [ 6.921540] 1 0 0 0 0 0 0 00 [ 6.922278] 1 0 0 0 0 0 0 00 [ 6.922987] 1 0 0 0 0 0 0 00 [ 6.923720] 1 0 0 0 0 0 0 00 [ 6.924437] IRQ to pin mappings: [ 6.924941] IRQ0 -> 0:2 [ 6.925393] IRQ1 -> 0:1 [ 6.925820] IRQ3 -> 0:3 [ 6.926277] IRQ4 -> 0:4 [ 6.926704] IRQ5 -> 0:5 [ 6.927161] IRQ6 -> 0:6 [ 6.927588] IRQ7 -> 0:7 [ 6.928042] IRQ8 -> 0:8 [ 6.928470] IRQ9 -> 0:9 [ 6.928903] IRQ10 -> 0:10 [ 6.929381] IRQ11 -> 0:11 [ 6.929840] IRQ12 -> 0:12 [ 6.930324] IRQ13 -> 0:13 [ 6.930776] IRQ14 -> 0:14 [ 6.931257] IRQ15 -> 0:15 [ 6.931710] .................................... done. [ 6.932520] Using IPI Shortcut mode [ 6.938573] Key type trusted registered [ 6.940270] Key type encrypted registered [ 6.950596] rtc_cmos 00:00: setting system clock to 2013-10-09 14:21:16 UTC (1381328476) [ 6.952550] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.953557] EDD information not available. [ 6.954248] ALSA device list: [ 6.954705] No soundcards found. [ 6.960370] Freeing unused kernel memory: 2016K (c19c1000 - c1bb9000) [ 6.961935] BUG: unable to handle kernel NULL pointer dereference at 00000010 [ 6.962703] IP: [] __lock_acquire+0x79/0x1ef0 [ 6.962703] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 [ 6.962703] Oops: 0000 [#1] SMP [ 6.962703] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00044-gc7727a8 #616 [ 6.962703] task: c0018000 ti: c001a000 task.ti: c001a000 [ 6.962703] EIP: 0060:[] EFLAGS: 00010046 CPU: 1 [ 6.962703] EIP is at __lock_acquire+0x79/0x1ef0 [ 6.962703] EAX: 00000046 EBX: 00000010 ECX: 00000000 EDX: 00000000 [ 6.962703] ESI: 00000000 EDI: c0018000 EBP: c001bd8c ESP: c001bd38 [ 6.962703] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 6.962703] CR0: 8005003b CR2: 00000010 CR3: 01bc4000 CR4: 000006b0 [ 6.962703] Stack: [ 6.962703] 00000000 00000004 00000000 00000004 c0018000 00000006 c0018000 c0a4d767 [ 6.962703] cd3dfa48 c001bd7c 00000006 00000002 c00184b8 00000246 c17c4cc0 00000000 [ 6.962703] 00000000 c001bdb8 00000246 c0018000 00000000 c001bdc0 c030385e 00000000 [ 6.962703] Call Trace: [ 6.962703] [] ? __raw_spin_lock_init+0x27/0x80 [ 6.962703] [] lock_acquire+0xee/0x130 [ 6.962703] [] ? __pte_alloc+0xa5/0x270 [ 6.962703] [] _raw_spin_lock+0x7a/0x130 [ 6.962703] [] ? __pte_alloc+0xa5/0x270 [ 6.962703] [] __pte_alloc+0xa5/0x270 [ 6.962703] [] handle_mm_fault+0x178c/0x1950 [ 6.962703] [] ? follow_page_mask+0x121/0x8f0 [ 6.962703] [] ? generic_file_aio_read+0xafb/0xe50 [ 6.962703] [] __get_user_pages+0x185/0xb90 [ 6.962703] [] get_user_pages+0x87/0xb0 [ 6.962703] [] get_arg_page+0x53/0x130 [ 6.962703] [] copy_strings+0x16a/0x440 [ 6.962703] [] copy_strings_kernel+0x2a/0x50 [ 6.962703] [] do_execve_common+0x894/0xd00 [ 6.962703] [] ? do_execve_common+0x183/0xd00 [ 6.962703] [] do_execve+0x16/0x30 [ 6.962703] [] kernel_init+0x95/0x280 [ 6.962703] [] ret_from_kernel_thread+0x1b/0x28 [ 6.962703] [] ? rest_init+0x1e0/0x1e0 [ 6.962703] Code: 00 00 a1 90 fa c1 c1 83 05 70 03 d0 c1 01 83 15 74 03 d0 c1 00 85 c0 0f 84 a5 02 00 00 83 05 b0 03 d0 c1 01 83 15 b4 03 d0 c1 00 <81> 3b 60 e3 c5 c1 0f 84 53 05 00 00 83 fe 01 0f 86 02 03 00 00 [ 6.962703] EIP: [] __lock_acquire+0x79/0x1ef0 SS:ESP 0068:c001bd38 [ 6.962703] CR2: 0000000000000010 [ 6.962703] ---[ end trace c26ae1ffa4e19d4f ]--- [ 6.962703] Kernel panic - not syncing: Fatal exception [ 6.962703] Rebooting in 10 seconds.. Elapsed time: 15 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-i007-1008/c7727a852968b09a9a5756dc7c85c30287c6ada3/vmlinuz-3.12.0-rc2-00044-gc7727a8 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-i007-1008/kas:dynamic_ptl:v1/.vmlinuz-c7727a852968b09a9a5756dc7c85c30287c6ada3-20131009222057-6-lkp-st01 branch=kas/dynamic_ptl/v1 BOOT_IMAGE=/kernel/i386-randconfig-i007-1008/c7727a852968b09a9a5756dc7c85c30287c6ada3/vmlinuz-3.12.0-rc2-00044-gc7727a8' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::20661-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -drive file=/fs/LABEL=KVM/disk0-yocto-lkp-st01-2,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk1-yocto-lkp-st01-2,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk2-yocto-lkp-st01-2,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk3-yocto-lkp-st01-2,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk4-yocto-lkp-st01-2,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk5-yocto-lkp-st01-2,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-yocto-lkp-st01-2 -serial file:/dev/shm/kboot/serial-yocto-lkp-st01-2 -daemonize -display none -monitor null