[ 0.000000] Linux version 3.12.0-rc2-next-20130927-03100-ga0cf1ab (kbuild@jaketown) (gcc version 4.8.1 (Debian 4.8.1-8) ) #3 SMP Fri Oct 4 22:52:48 CST 2013 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [800fdae0] [ 0.000000] mpc: fdaf0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x047fffff] [ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0f800000-0x0fbfffff] [ 0.000000] [mem 0x0f800000-0x0fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x08000000-0x0f7fffff] [ 0.000000] [mem 0x08000000-0x0f7fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x07ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff] [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x043cf000, 0x043cffff] PGTABLE [ 0.000000] cma: dma_contiguous_reserve(limit 00000000) [ 0.000000] cma: dma_contiguous_reserve: reserving 25 MiB for global area [ 0.000000] cma: dma_contiguous_reserve_area(size 198f000, base 00000000, limit 00000000) [ 0.000000] cma: CMA: reserved 28 MiB at 0e000000 [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 127780(97%) [ 0.000000] RAMDISK: [mem 0x0fce4000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd950 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00001000-0x0fffdfff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] free_area_init_node: node 0, pgdat 836a3780, node_mem_map 8d600020 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65436 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @8fcce000 s31616 r0 d13440 u45056 [ 0.000000] pcpu-alloc: s31616 r0 d13440 u45056 alloc=11*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr fcd05c0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64924 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-j0-10042023/next:master/.vmlinuz-a0cf1abc25ac197dd97b857c0f6341066a8cb1cf-20131004225358-4-jaketown branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-j0-10042023/a0cf1abc25ac197dd97b857c0f6341066a8cb1cf/vmlinuz-3.12.0-rc2-next-20130927-03100-ga0cf1ab [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 166256K/261744K available (24104K kernel code, 7543K rwdata, 14088K rodata, 932K init, 6260K bss, 95488K reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB) [ 0.000000] vmalloc : 0x907fe000 - 0xffd33000 (1781 MB) [ 0.000000] lowmem : 0x80000000 - 0x8fffe000 ( 255 MB) [ 0.000000] .init : 0x83cac000 - 0x83d95000 ( 932 kB) [ 0.000000] .data : 0x8278a4cd - 0x83cabf00 (21638 kB) [ 0.000000] .text : 0x81000000 - 0x8278a4cd (24105 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=80096000 soft=80080000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3567 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing: ok | ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context: ok | ok | ok | [ 0.000000] try: ok | ok | ok | [ 0.000000] block: ok | ok | ok | [ 0.000000] spinlock: ok | ok | ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 253 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] ODEBUG: 13 of 13 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 1600.055 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.020000] Calibrating delay loop (skipped) preset value.. 3200.11 BogoMIPS (lpj=16000550) [ 0.020000] pid_max: default: 4096 minimum: 301 [ 0.020000] Mount-cache hash table entries: 512 [ 0.020846] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.020846] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.020846] tlb_flushall_shift: -1 [ 0.029216] Freeing SMP alternatives memory: 44K (83d95000 - 83da0000) [ 0.045408] ACPI: Core revision 20130823 [ 0.052876] ACPI: All ACPI Tables successfully acquired [ 0.054972] Getting VERSION: 50014 [ 0.055923] Getting VERSION: 50014 [ 0.056854] Getting ID: 0 [ 0.057589] Getting ID: f000000 [ 0.058459] Getting LVT0: 8700 [ 0.059284] Getting LVT1: 8400 [ 0.060020] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.061610] enabled ExtINT on CPU#0 [ 0.064756] ENABLING IO-APIC IRQs [ 0.065656] init IO_APIC IRQs [ 0.066458] apic 0 pin 0 not connected [ 0.067531] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.069646] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.070064] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.072188] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.074322] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.076450] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.080061] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.082168] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.084259] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.086344] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.088473] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.090071] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.092222] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.094362] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.096503] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.098637] apic 0 pin 16 not connected [ 0.100012] apic 0 pin 17 not connected [ 0.101065] apic 0 pin 18 not connected [ 0.102097] apic 0 pin 19 not connected [ 0.103136] apic 0 pin 20 not connected [ 0.104188] apic 0 pin 21 not connected [ 0.105218] apic 0 pin 22 not connected [ 0.106253] apic 0 pin 23 not connected [ 0.107472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.110012] smpboot: CPU0: GenuineIntel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.112759] Using local APIC timer interrupts. [ 0.112759] calibrating APIC timer ... [ 0.120000] ... lapic delta = 6250155 [ 0.120000] ... PM-Timer delta = 357970 [ 0.120000] ... PM-Timer result ok [ 0.120000] ..... delta 6250155 [ 0.120000] ..... mult: 268442113 [ 0.120000] ..... calibration result: 10000248 [ 0.120000] ..... CPU clock speed is 1600.0035 MHz. [ 0.120000] ..... host bus clock speed is 1000.0248 MHz. [ 0.120000] Performance Events: [ 0.120000] ftrace: Allocated trace_printk buffers [ 0.123331] SMP alternatives: lockdep: fixing up alternatives [ 0.125114] CPU 1 irqstacks, hard=803f0000 soft=803f2000 [ 0.126691] smpboot: Booting Node 0, Processors # 1 OK [ 0.010000] Initializing CPU#1 [ 0.020000] kvm-clock: cpu 1, msr 0:fffd041, secondary cpu clock [ 0.020000] masked ExtINT on CPU#1 [ 0.143201] KVM setup async PF for cpu 1 [ 0.143417] Brought up 2 CPUs [ 0.143424] smpboot: Total of 2 processors activated (6400.22 BogoMIPS) [ 0.144102] kvm-stealtime: cpu 1, msr fcdb5c0 [ 0.151971] devtmpfs: initialized [ 0.163243] xor: measuring software checksum speed [ 0.257095] pIII_sse : 4642.400 MB/sec [ 0.357091] prefetch64-sse: 4996.400 MB/sec [ 0.358355] xor: using function: prefetch64-sse (4996.400 MB/sec) [ 0.360024] atomic64 test passed for i386+ platform with CX8 and with SSE [ 0.363283] regulator-dummy: no parameters [ 0.371714] NET: Registered protocol family 16 [ 0.376084] cpuidle: using governor ladder [ 0.377245] cpuidle: using governor menu [ 0.462944] ACPI: bus type PCI registered [ 0.464453] PCI: Using configuration type 1 for base access [ 0.468166] Missing cpus node, bailing out [ 0.469459] Missing cpus node, bailing out [ 0.511074] bio: create slab at 0 [ 0.677100] raid6: mmxx1 1787 MB/s [ 0.847134] raid6: mmxx2 1967 MB/s [ 1.017125] raid6: sse1x1 1516 MB/s [ 1.187111] raid6: sse1x2 1754 MB/s [ 1.357088] raid6: sse2x1 2922 MB/s [ 1.527108] raid6: sse2x2 3471 MB/s [ 1.528217] raid6: using algorithm sse2x2 (3471 MB/s) [ 1.529586] raid6: using intx1 recovery algorithm [ 1.531401] ACPI: Added _OSI(Module Device) [ 1.533063] ACPI: Added _OSI(Processor Device) [ 1.534736] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.540028] ACPI: Added _OSI(Processor Aggregator Device) [ 1.560725] ACPI: Interpreter enabled [ 1.561746] ACPI: (supports S0 S5) [ 1.562648] ACPI: Using IOAPIC for interrupt routing [ 1.564009] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.595861] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.597482] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 1.599030] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.601138] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 1.604434] PCI host bridge to bus 0000:00 [ 1.605513] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.606940] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.608530] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.610018] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.611791] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 1.613703] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 1.616743] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 1.620899] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 1.628881] pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f] [ 1.633465] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 1.635868] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 1.637728] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 1.640916] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 1.645554] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 1.650046] pci 0000:00:02.0: reg 0x14: [mem 0xfebe0000-0xfebe0fff] [ 1.665646] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 1.668474] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 1.672513] pci 0000:00:03.0: reg 0x10: [io 0xc040-0xc05f] [ 1.676295] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff] [ 1.689394] pci 0000:00:03.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref] [ 1.691169] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 1.695238] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff] [ 1.700018] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f] [ 1.713726] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref] [ 1.716450] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000 [ 1.720018] pci 0000:00:05.0: reg 0x10: [mem 0xfebe2000-0xfebe200f] [ 1.731233] pci_bus 0000:00: on NUMA node 0 [ 1.735377] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.737736] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.740068] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.742364] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.744370] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.747991] ACPI: Enabled 16 GPEs in block 00 to 0F [ 1.749387] ACPI: \_SB_.PCI0: notify handler is installed [ 1.750245] Found 1 acpi root devices [ 1.752950] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.752950] vgaarb: loaded [ 1.753120] vgaarb: bridge control possible 0000:00:02.0 [ 1.754783] tps65010: version 2 May 2005 [ 1.800126] tps65010: no chip? [ 1.802104] SCSI subsystem initialized [ 1.803246] libata version 3.00 loaded. [ 1.804426] ACPI: bus type USB registered [ 1.805583] usbcore: registered new interface driver usbfs [ 1.807047] usbcore: registered new interface driver hub [ 1.808481] usbcore: registered new device driver usb [ 1.810238] Linux video capture interface: v2.00 [ 1.811494] pps_core: LinuxPPS API ver. 1 registered [ 1.812781] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.815100] PTP clock support registered [ 1.816211] EDAC MC: Ver: 3.0.0 [ 1.817569] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 1.819163] wmi: Mapper loaded [ 1.820336] Advanced Linux Sound Architecture Driver Initialized. [ 1.822014] PCI: Using ACPI for IRQ routing [ 1.823104] PCI: pci_cache_line_size set to 64 bytes [ 1.824677] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.826237] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 1.828858] Bluetooth: Core ver 2.16 [ 1.830082] NET: Registered protocol family 31 [ 1.831472] Bluetooth: HCI device and connection manager initialized [ 1.833777] Bluetooth: HCI socket layer initialized [ 1.835239] Bluetooth: L2CAP socket layer initialized [ 1.836603] Bluetooth: SCO socket layer initialized [ 1.837863] NET: Registered protocol family 8 [ 1.838995] NET: Registered protocol family 20 [ 1.842619] Switched to clocksource kvm-clock [ 1.844664] Warning: could not register all branches stats [ 1.846097] Warning: could not register annotated branches stats [ 1.978800] FS-Cache: Loaded [ 1.980274] CacheFiles: Loaded [ 1.981272] pnp: PnP ACPI init [ 1.982195] ACPI: bus type PNP registered [ 1.983432] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 1.985671] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.987515] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 1.989668] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.991469] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 1.993676] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.995512] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 1.997573] pnp 00:03: [dma 2] [ 1.998496] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 2.000387] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 2.002543] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 2.004375] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 2.006527] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.009232] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.011608] pnp: PnP ACPI: found 7 devices [ 2.012666] ACPI: bus type PNP unregistered [ 2.013732] INFO_MDMA: LNW DMA Driver Version 1.1.0 [ 2.051868] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.053295] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.054696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.056280] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 2.058039] NET: Registered protocol family 1 [ 2.059197] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 2.060790] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 2.062282] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 2.063908] pci 0000:00:02.0: Boot video device [ 2.065145] PCI: CLS 0 bytes, default 64 [ 2.066671] Unpacking initramfs... [ 2.358410] Freeing initrd memory: 3120K (8fce4000 - 8fff0000) [ 2.434960] DMA-API: preallocated 65536 debug entries [ 2.436283] DMA-API: debugging enabled by kernel config [ 2.441272] microcode: no support for this CPU vendor [ 2.444760] NatSemi SCx200 Driver [ 2.447016] audit: initializing netlink socket (disabled) [ 2.448488] type=2000 audit(1380898450.634:1): initialized [ 2.457119] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.459926] VFS: Disk quotas dquot_6.5.2 [ 2.461287] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.467641] QNX4 filesystem 0.2.3 registered. [ 2.468863] QNX6 filesystem 1.0.0 registered. [ 2.470152] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled [ 2.475430] NILFS version 2 loaded [ 2.476326] BeFS version: 0.9.3 [ 2.477249] OCFS2 1.5.0 [ 2.478707] ocfs2: Registered cluster interface o2cb [ 2.479999] OCFS2 DLMFS 1.5.0 [ 2.481306] OCFS2 User DLM kernel interface loaded [ 2.482539] OCFS2 Node Manager 1.5.0 [ 2.488182] OCFS2 DLM 1.5.0 [ 2.489993] bio: create slab at 1 [ 2.492507] Btrfs loaded, assert=on [ 2.493418] btrfs: selftest: Running btrfs free space cache tests [ 2.494940] btrfs: selftest: Running extent only tests [ 2.496301] btrfs: selftest: Running bitmap only tests [ 2.497615] btrfs: selftest: Running bitmap and extent tests [ 2.499095] btrfs: selftest: Free space cache tests finished [ 2.502764] GFS2 installed [ 2.504051] msgmni has been set to 386 [ 2.533647] alg: No test for lz4hc (lz4hc-generic) [ 2.535581] alg: No test for stdrng (krng) [ 2.537464] NET: Registered protocol family 38 [ 2.538922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.540900] io scheduler noop registered [ 2.541905] io scheduler deadline registered [ 2.543314] io scheduler cfq registered (default) [ 2.544534] test_string_helpers: Running tests... [ 2.546411] xz_dec_test: module loaded [ 2.547381] xz_dec_test: Create a device node with 'mknod xz_dec_test c 249 0' and write .xz files to it. [ 2.554727] rbtree testing -> 18040 cycles [ 3.809815] augmented rbtree testing -> 29925 cycles [ 5.867313] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.869631] rivafb_setup START [ 5.870764] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 5.873219] hgafb: HGA card not detected. [ 5.874282] hgafb: probe of hgafb.0 failed with error -22 [ 5.876843] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 5.880936] usbcore: registered new interface driver udlfb [ 5.883028] usbcore: registered new interface driver smscufx [ 6.005027] uvesafb: VGABIOS Cirrus extension, VGABIOS Cirrus extension, 1.0, OEM: VGABIOS Cirrus extension, VBE v2.0 [ 6.014837] uvesafb: no monitor limits have been set, default refresh rate will be used [ 6.018012] uvesafb: VBE state buffer size cannot be determined (eax=0x14f, err=0) [ 6.020990] uvesafb: scrolling: redraw [ 6.022422] uvesafb: request region 0x3c0-0x3e0 failed [ 6.024411] uvesafb: probe of uvesafb.0 failed with error -5 [ 6.026704] ipmi message handler version 39.2 [ 6.028363] ipmi device interface [ 6.029860] IPMI System Interface driver. [ 6.031704] ipmi_si: Adding default-specified kcs state machine [ 6.033985] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 6.037687] ipmi_si: Interface detection failed [ 16.040834] ipmi_si: Adding default-specified smic state machine [ 16.042639] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 16.045680] ipmi_si: Interface detection failed [ 16.120336] ipmi_si: Adding default-specified bt state machine [ 16.122739] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 16.125628] ipmi_si: Interface detection failed [ 16.240645] ipmi_si: Unable to find any System Interface(s) [ 16.242130] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 16.244831] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 16.247221] ACPI: Power Button [PWRF] [ 16.371965] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 16.403431] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 16.410390] lp: driver loaded but no devices found [ 16.411905] toshiba: not a supported Toshiba laptop [ 16.413684] ppdev: user-space parallel port driver [ 16.415796] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 16.417852] platform pc8736x_gpio.0: no device found [ 16.419706] nsc_gpio initializing [ 16.420771] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 16.422210] Linux agpgart interface v0.103 [ 16.424252] [drm] Initialized drm 1.1.0 20060810 [ 16.425760] drm/i810 does not support SMP [ 16.427407] usbcore: registered new interface driver udl [ 16.429263] parport_pc 00:04: reported by Plug and Play ACPI [ 16.431166] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] [ 16.435139] lp0: using parport0 (interrupt-driven). [ 16.436510] lp0: console ready [ 16.438992] dummy-irq: no IRQ given. Use irq=N [ 16.440434] lkdtm: No crash points registered, enable through debugfs [ 16.442401] Phantom Linux Driver, version n0.9.8, init OK [ 16.444231] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 16.446528] c2port c2port0: C2 port uc added [ 16.447753] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 16.450275] Guest personality initialized and is inactive [ 16.452398] VMCI host device registered (name=vmci, major=10, minor=60) [ 16.454265] Initialized host personality [ 16.456432] usbcore: registered new interface driver viperboard [ 16.459179] Loading iSCSI transport class v2.0-870. [ 16.461990] rdac: device handler registered [ 16.463560] hp_sw: device handler registered [ 16.464796] emc: device handler registered [ 16.465996] alua: device handler registered [ 16.469547] fnic: Cisco FCoE HBA Driver, ver 1.5.0.23 [ 16.472030] fnic: Successfully Initialized Trace Buffer [ 16.474738] bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.14 (Mar 08, 2013) [ 16.478874] Adaptec aacraid driver 1.2-0[30200]-ms [ 16.481985] iscsi: registered transport (qla4xxx) [ 16.483389] QLogic iSCSI HBA Driver [ 16.484367] Brocade BFA FC/FCOE SCSI driver - version: 3.2.21.1 [ 16.486062] csiostor: Chelsio FCoE driver 1.0.0 [ 16.488087] DC390: clustering now enabled by default. If you get problems load [ 16.490388] with "disable_clustering=1" and report to maintainers [ 16.492659] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 [ 16.494780] mpt3sas version 02.100.00.00 loaded [ 16.497323] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 16.499237] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 16.501555] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 16.503699] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 16.506153] ppa: Version 2.07 (for Linux 2.4.x) [ 16.510659] imm: Version 2.05 (for Linux 2.4.0) [ 16.512854] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 16.514658] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 16.516908] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.6.2 (Jun 06, 2013) [ 16.519273] iscsi: registered transport (bnx2i) [ 16.521684] iscsi: registered transport (be2iscsi) [ 16.523014] In beiscsi_module_init, tt=835f35a4 [ 16.524663] VMware PVSCSI driver - version 1.0.2.0-k [ 16.526567] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 16.530674] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 16.540004] SSFDC read-only Flash Translation layer [ 16.542960] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 16.545405] Could not find PAR responsible for SC520CDP Flash Bank #1 [ 16.547062] Trying default address 0x8c00000 [ 16.548182] SC520 CDP flash device: 0x800000 at 0x8800000 [ 16.549549] Failed to ioremap_nocache [ 16.550572] NetSc520 flash device: 0x100000 at 0x200000 [ 16.551915] Failed to ioremap_nocache [ 16.552868] Failed to ioremap_nocache [ 16.553925] slram: not enough parameters. [ 16.554969] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 16.557228] pmc551: not detected [ 16.562479] ftl_cs: FTL header not found. [ 16.568875] HSI/SSI char device loaded [ 16.571432] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 16.577140] libphy: Fixed MDIO Bus: probed [ 16.578969] tun: Universal TUN/TAP device driver, 1.6 [ 16.580364] tun: (C) 1999-2004 Max Krasnyansky [ 16.583501] arcnet loaded. [ 16.584583] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 16.587183] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 16.590198] arcnet: raw mode (`r') encapsulation support loaded. [ 16.592328] arcnet: cap mode (`c') encapsulation support loaded. [ 16.594809] arcnet: COM90xx chipset support [ 16.597204] S1: No ARCnet cards found. [ 16.598801] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 16.601455] E-mail me if you actually test this driver, please! [ 16.603759] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 16.606170] arcnet: RIM I (entirely mem-mapped) support [ 16.607493] E-mail me if you actually test the RIM I driver, please! [ 16.609093] Given: node 00h, shmem 0h, irq 0 [ 16.610312] No autoprobe for RIM I; you must specify the shmem and irq! [ 16.612079] ipddp.c:v0.01 8/28/97 Bradford W. Johnson [ 16.614502] ipddp0: Appletalk-IP Decap. mode by Jay Schulist [ 16.616564] vcan: Virtual CAN interface driver [ 16.617732] CAN device driver interface [ 16.618775] usbcore: registered new interface driver ems_usb [ 16.620430] usbcore: registered new interface driver kvaser_usb [ 16.621997] usbcore: registered new interface driver peak_usb [ 16.623714] usbcore: registered new interface driver usb_8dev [ 16.625165] sja1000 CAN netdevice driver [ 16.626523] cc770: CAN netdevice driver [ 16.627958] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 16.629926] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013) [ 16.632631] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 16.635978] Brocade 10G Ethernet driver - version: 3.2.21.1 [ 16.638265] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.50 [ 16.639880] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 16.639880] http://www.scyld.com/network/drivers.html [ 16.643545] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 16.645159] sky2: driver version 1.30 [ 16.647741] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 16.649986] atp.c:v1.09=ac 2002/10/01 Donald Becker [ 16.652662] Solarflare NET driver v4.0 [ 16.654962] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 16.656725] tehuti: Options: hw_csum [ 16.657946] tlan: ThunderLAN driver v1.17 [ 16.659731] tlan: 0 devices installed, PCI: 0 EISA: 0 [ 16.661681] PPP generic driver version 2.4.2 [ 16.665017] PPP Deflate Compression module registered [ 16.668575] PPP MPPE Compression module registered [ 16.671895] NET: Registered protocol family 24 [ 16.675011] usbcore: registered new interface driver catc [ 16.677922] usbcore: registered new interface driver kaweth [ 16.680087] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 16.682174] usbcore: registered new interface driver pegasus [ 16.683810] usbcore: registered new interface driver rtl8150 [ 16.685378] usbcore: registered new interface driver r8152 [ 16.688784] usbcore: registered new interface driver hwa-rc [ 16.690607] usbcore: registered new interface driver i1480-dfu-usb [ 16.693388] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 16.695377] ehci-pci: EHCI PCI platform driver [ 16.696760] ehci-platform: EHCI generic platform driver [ 16.698450] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 16.700386] ohci-pci: OHCI PCI platform driver [ 16.701803] ohci-platform: OHCI generic platform driver [ 16.703524] driver u132_hcd [ 16.705785] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 16.707570] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 16.710208] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 16.711876] [ 16.714994] usbcore: registered new interface driver wusb-cbaf [ 16.716662] usbcore: registered new interface driver usblp [ 16.718255] usbcore: registered new interface driver usb-storage [ 16.719981] usbcore: registered new interface driver ums-cypress [ 16.721759] usbcore: registered new interface driver ums-datafab [ 16.723445] usbcore: registered new interface driver ums-freecom [ 16.725204] usbcore: registered new interface driver ums-jumpshot [ 16.726952] usbcore: registered new interface driver ums-karma [ 16.728586] usbcore: registered new interface driver ums-sddr09 [ 16.730357] usbcore: registered new interface driver ums-sddr55 [ 16.732102] usbcore: registered new interface driver mdc800 [ 16.733653] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 16.735809] usbcore: registered new interface driver microtekX6 [ 16.737499] usbcore: registered new interface driver adutux [ 16.739701] usbcore: registered new interface driver appledisplay [ 16.741781] usbcore: registered new interface driver cypress_cy7c63 [ 16.743567] usbcore: registered new interface driver emi62 - firmware loader [ 16.745651] driver ftdi-elan [ 16.748106] usbcore: registered new interface driver ftdi-elan [ 16.750119] usbcore: registered new interface driver idmouse [ 16.751752] usbcore: registered new interface driver iowarrior [ 16.753401] usbcore: registered new interface driver isight_firmware [ 16.755243] usbcore: registered new interface driver usblcd [ 16.756856] usbcore: registered new interface driver usbled [ 16.758434] usbcore: registered new interface driver legousbtower [ 16.760254] usbcore: registered new interface driver rio500 [ 16.761919] usbcore: registered new interface driver usbtest [ 16.763517] usbcore: registered new interface driver usb_ehset_test [ 16.765340] usbcore: registered new interface driver trancevibrator [ 16.767165] usbcore: registered new interface driver uss720 [ 16.768708] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 16.771450] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 16.773452] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 16.775451] uss720: If you just want to connect to a printer, use usblp instead [ 16.777583] usbcore: registered new interface driver usbsevseg [ 16.779460] usbcore: registered new interface driver yurex [ 16.781375] usbcore: registered new interface driver sisusb [ 16.783972] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 16.786465] dummy_hcd dummy_hcd.0: Dummy host controller [ 16.788988] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 16.791565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 16.793310] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.796217] usb usb1: Product: Dummy host controller [ 16.798338] usb usb1: Manufacturer: Linux 3.12.0-rc2-next-20130927-03100-ga0cf1ab dummy_hcd [ 16.801978] usb usb1: SerialNumber: dummy_hcd.0 [ 16.805643] hub 1-0:1.0: USB hub found [ 16.806878] hub 1-0:1.0: 1 port detected [ 16.811106] g_mass_storage gadget: no file given for LUN0 [ 16.813244] g_mass_storage dummy_udc.0: failed to start g_mass_storage: -22 [ 16.815550] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 16.820440] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.822070] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.824210] parport0: cannot grant exclusive access for device parkbd [ 16.826777] mousedev: PS/2 mouse device common for all mice [ 16.830490] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 16.830875] i2c /dev entries driver [ 16.831853] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 17.071124] i2c-parport-light: adapter type unspecified [ 17.074010] usbcore: registered new interface driver hdpvr [ 17.076610] usbcore: registered new interface driver pvrusb2 [ 17.078810] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 17.082258] pvrusb2: Debug mask is 31 (0x1f) [ 17.084179] usbcore: registered new interface driver stk1160 [ 17.086578] usbcore: registered new interface driver em28xx [ 17.088738] usbcore: registered new interface driver radioshark2 [ 17.091265] usbcore: registered new interface driver dsbr100 [ 17.093319] usbcore: registered new interface driver radio-si470x [ 17.095933] usbcore: registered new interface driver radio-ma901 [ 17.099035] pps pps0: new PPS source ktimer [ 17.100212] pps pps0: ktimer PPS source registered [ 17.101443] pps_parport: parallel port PPS client [ 17.102673] parport0: cannot grant exclusive access for device pps_parport [ 17.104409] pps_parport: couldn't register with parport0 [ 17.105849] Driver for 1-wire Dallas network protocol. [ 17.107349] usbcore: registered new interface driver DS9490R [ 17.108864] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 17.447426] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 25.591137] pc87360: PC8736x not detected, module not inserted [ 26.732114] acquirewdt: WDT driver for Acquire single board computer initialising [ 26.735443] acquirewdt: I/O address 0x0043 already in use [ 26.737509] acquirewdt: probe of acquirewdt failed with error -5 [ 26.739745] advantechwdt: WDT driver for Advantech single board computer initialising [ 26.744730] advantechwdt: initialized. timeout=60 sec (nowayout=0) [ 26.747208] alim7101_wdt: Steve Hill [ 26.749262] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 26.751791] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 26.754738] wafer5823wdt: I/O address 0x0443 already in use [ 26.756845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 26.759257] it87_wdt: no device [ 26.760750] sc1200wdt: build 20020303 [ 26.762304] sc1200wdt: io parameter must be specified [ 26.764321] pc87413_wdt: Version 1.1 at io 0x2E [ 26.766047] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 26.768519] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 26.771894] sbc60xxwdt: I/O address 0x0443 already in use [ 26.773938] sbc7240_wdt: I/O address 0x0443 already in use [ 26.776006] cpu5wdt: misc_register failed [ 26.777908] w83627hf_wdt: WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising [ 26.781913] w83627hf_wdt: Watchdog already running. Resetting timeout to 60 sec [ 26.784924] w83627hf_wdt: cannot register miscdev on minor=130 (err=-16) [ 26.787419] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 26.789710] w83697hf_wdt: watchdog not found at address 0x2e [ 26.791926] w83697hf_wdt: No W83697HF/HG could be found [ 26.793907] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 26.797151] w83697ug_wdt: No W83697UG/UF could be found [ 26.799137] w83877f_wdt: I/O address 0x0443 already in use [ 26.801274] w83977f_wdt: driver v1.00 [ 26.802689] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 26.805143] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 26.807373] machzwd: no ZF-Logic found [ 26.809517] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 26.812632] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 26.816370] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 26.820605] Bluetooth: Virtual HCI driver ver 1.4 [ 26.823157] usbcore: registered new interface driver bcm203x [ 26.825499] usbcore: registered new interface driver bpa10x [ 26.827736] usbcore: registered new interface driver bfusb [ 26.830203] EDAC DEBUG: i5000_init: MC: [ 26.831875] EDAC DEBUG: i5400_init: MC: [ 26.833535] EDAC DEBUG: i7300_init: [ 26.835726] EDAC DEBUG: i82875p_init: 875p pci_get_device fail [ 26.838326] EDAC DEBUG: i82975x_init: i82975x pci_get_device fail [ 26.841104] EDAC DEBUG: i3200_init: i3200 pci_get_device fail [ 26.844917] EDAC DEBUG: i82860_init: 860 pci_get_device fail [ 33.160216] (null): enodev DEV ADDR = 0xFF [ 33.172488] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 33.175601] usbcore: registered new interface driver usbhid [ 33.177644] usbhid: USB HID core driver [ 33.179270] usbip_core: usbip_core_init:805: USB/IP Core v1.0.0 [ 33.182049] vhci_hcd: vhci_hcd_probe:1000: name vhci_hcd id -1 [ 33.184235] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller [ 33.186831] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2 [ 33.189429] vhci_hcd: vhci_start:884: enter vhci_start [ 33.193350] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 33.195896] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.198511] usb usb2: Product: USB/IP Virtual Host Controller [ 33.200696] usb usb2: Manufacturer: Linux 3.12.0-rc2-next-20130927-03100-ga0cf1ab vhci_hcd [ 33.203705] usb usb2: SerialNumber: vhci_hcd [ 33.206307] hub 2-0:1.0: USB hub found [ 33.207763] vhci_hcd: vhci_hub_control:247: typeReq a006 wValue 2900 wIndex 0 [ 33.210734] vhci_hcd: vhci_hub_control:305: GetHubDescriptor [ 33.212874] vhci_hcd: vhci_hub_control:398: port -1 [ 33.214719] vhci_hcd: vhci_hub_control:405: bye [ 33.216477] hub 2-0:1.0: 8 ports detected [ 33.218043] vhci_hcd: vhci_hub_control:247: typeReq a000 wValue 0 wIndex 0 [ 33.220706] vhci_hcd: vhci_hub_control:309: GetHubStatus [ 33.222711] vhci_hcd: vhci_hub_control:398: port -1 [ 33.224495] vhci_hcd: vhci_hub_control:405: bye [ 33.227365] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 1 [ 33.229877] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.232431] vhci_hcd: vhci_hub_control:398: port 0 [ 33.234237] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.237185] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.239123] vhci_hcd: dump_port_status_diff:119: [ 33.240954] vhci_hcd: vhci_hub_control:405: bye [ 33.242758] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 2 [ 33.245248] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.247618] vhci_hcd: vhci_hub_control:398: port 1 [ 33.249379] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.252441] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.254440] vhci_hcd: dump_port_status_diff:119: [ 33.256153] vhci_hcd: vhci_hub_control:405: bye [ 33.257914] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 3 [ 33.260506] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.262892] vhci_hcd: vhci_hub_control:398: port 2 [ 33.264650] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.267598] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.269519] vhci_hcd: dump_port_status_diff:119: [ 33.271335] vhci_hcd: vhci_hub_control:405: bye [ 33.273105] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 4 [ 33.275663] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.278016] vhci_hcd: vhci_hub_control:398: port 3 [ 33.279770] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.282837] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.284771] vhci_hcd: dump_port_status_diff:119: [ 33.286489] vhci_hcd: vhci_hub_control:405: bye [ 33.288232] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 5 [ 33.290823] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.293226] vhci_hcd: vhci_hub_control:398: port 4 [ 33.295041] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.297996] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.299923] vhci_hcd: dump_port_status_diff:119: [ 33.301763] vhci_hcd: vhci_hub_control:405: bye [ 33.303528] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 6 [ 33.306021] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.308394] vhci_hcd: vhci_hub_control:398: port 5 [ 33.310199] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.313200] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.315202] vhci_hcd: dump_port_status_diff:119: [ 33.316931] vhci_hcd: vhci_hub_control:405: bye [ 33.318694] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 7 [ 33.321296] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.323682] vhci_hcd: vhci_hub_control:398: port 6 [ 33.325441] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.328392] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.330407] vhci_hcd: dump_port_status_diff:119: [ 33.332156] vhci_hcd: vhci_hub_control:405: bye [ 33.333972] vhci_hcd: vhci_hub_control:247: typeReq 2303 wValue 8 wIndex 8 [ 33.336491] vhci_hcd: vhci_hub_control:384: SetPortFeature: default 8 [ 33.338839] vhci_hcd: vhci_hub_control:398: port 7 [ 33.340678] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 33.343657] vhci_hcd: dump_port_status_diff:115: +POWER [ 33.345595] vhci_hcd: dump_port_status_diff:119: [ 33.347318] vhci_hcd: vhci_hub_control:405: bye [ 33.349490] vhci_hcd: vhci_hcd_probe:1028: bye [ 33.351261] vhci_hcd: vhci_hcd_init:1150: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0 [ 33.440184] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 1 [ 33.442770] vhci_hcd: vhci_hub_control:313: GetPortStatus port 1 [ 33.444990] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.447307] vhci_hcd: vhci_hub_control:398: port 0 [ 33.449056] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.452085] vhci_hcd: dump_port_status_diff:115: POWER [ 33.454079] vhci_hcd: dump_port_status_diff:119: [ 33.455803] vhci_hcd: vhci_hub_control:405: bye [ 33.460587] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 2 [ 33.463093] vhci_hcd: vhci_hub_control:313: GetPortStatus port 2 [ 33.465329] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.467638] vhci_hcd: vhci_hub_control:398: port 1 [ 33.469407] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.472458] vhci_hcd: dump_port_status_diff:115: POWER [ 33.474452] vhci_hcd: dump_port_status_diff:119: [ 33.476227] vhci_hcd: vhci_hub_control:405: bye [ 33.478002] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 3 [ 33.480603] vhci_hcd: vhci_hub_control:313: GetPortStatus port 3 [ 33.482823] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.485116] vhci_hcd: vhci_hub_control:398: port 2 [ 33.486869] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.489821] vhci_hcd: dump_port_status_diff:115: POWER [ 33.491849] vhci_hcd: dump_port_status_diff:119: [ 33.493602] vhci_hcd: vhci_hub_control:405: bye [ 33.496440] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 4 [ 33.498954] vhci_hcd: vhci_hub_control:313: GetPortStatus port 4 [ 33.501248] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.503571] vhci_hcd: vhci_hub_control:398: port 3 [ 33.505329] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.508277] vhci_hcd: dump_port_status_diff:115: POWER [ 33.510288] vhci_hcd: dump_port_status_diff:119: [ 33.512006] vhci_hcd: vhci_hub_control:405: bye [ 33.514165] panel: driver version 0.9.5 registered on parport0 (io=0x378). [ 33.516838] usbcore: registered new interface driver rts5139 [ 33.518988] usbcore: registered new interface driver line6usb [ 33.521154] vme_pio2: No cards, skipping registration [ 33.523078] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 5 [ 33.525584] vhci_hcd: vhci_hub_control:313: GetPortStatus port 5 [ 33.527797] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.530441] vhci_hcd: vhci_hub_control:398: port 4 [ 33.532203] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.535215] vhci_hcd: dump_port_status_diff:115: POWER [ 33.537160] vhci_hcd: dump_port_status_diff:119: [ 33.538884] vhci_hcd: vhci_hub_control:405: bye [ 33.540756] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 6 [ 33.543394] vhci_hcd: vhci_hub_control:313: GetPortStatus port 6 [ 33.545619] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.547921] vhci_hcd: vhci_hub_control:398: port 5 [ 33.549682] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.552809] vhci_hcd: dump_port_status_diff:115: POWER [ 33.554830] vhci_hcd: dump_port_status_diff:119: [ 33.556557] vhci_hcd: vhci_hub_control:405: bye [ 33.558446] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 7 [ 33.558957] zram: Created 1 device(s) ... [ 33.559101] beceem: Beceem Communications Inc. WiMAX driver, 5.2.45 [ 33.559105] Copyright 2010. Beceem Communications Inc [ 33.559227] usbcore: registered new interface driver usbbcm [ 33.559346] usbcore: registered new interface driver ft1000usb [ 33.570997] vhci_hcd: vhci_hub_control:313: GetPortStatus port 7 [ 33.573226] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.575593] vhci_hcd: vhci_hub_control:398: port 6 [ 33.577349] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.580356] vhci_hcd: dump_port_status_diff:115: POWER [ 33.582307] vhci_hcd: dump_port_status_diff:119: [ 33.584028] vhci_hcd: vhci_hub_control:405: bye [ 33.585958] vhci_hcd: vhci_hub_control:247: typeReq a300 wValue 0 wIndex 8 [ 33.586806] ozwpan ozwpan: Ozmo Devices WPAN [ 33.590218] vhci_hcd: vhci_hub_control:313: GetPortStatus port 8 [ 33.592458] vhci_hcd: vhci_hub_control:355: GetPortStatus bye 100 0 [ 33.594821] vhci_hcd: vhci_hub_control:398: port 7 [ 33.596572] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000100 -> 00000100 [ 33.599508] vhci_hcd: dump_port_status_diff:115: POWER [ 33.601520] vhci_hcd: dump_port_status_diff:119: [ 33.603238] vhci_hcd: vhci_hub_control:405: bye [ 33.605296] ozwpan ozwpan: new USB bus registered, assigned bus number 3 [ 33.608030] usb usb2: vhci_bus_suspend [ 33.609524] vhci_hcd: vhci_hub_status:208: changed 0 [ 33.611834] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 33.614813] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.617435] usb usb3: Product: Ozmo Devices WPAN [ 33.619122] usb usb3: Manufacturer: Linux 3.12.0-rc2-next-20130927-03100-ga0cf1ab Ozmo WPAN [ 33.622393] usb usb3: SerialNumber: ozwpan [ 33.625443] hub 3-0:1.0: USB hub found [ 33.627017] hub 3-0:1.0: 8 ports detected [ 33.632251] usbcore: registered new interface driver gdm_wimax [ 33.635063] usbcore: registered new interface driver cedusb [ 33.641845] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 33.644743] aedsp16: I/O, IRQ and DMA are mandatory [ 33.646602] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 33.648877] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 33.651783] ad1848: No ISAPnP cards found, trying standard ones... [ 33.654589] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996 [ 33.657301] I/O, IRQ, DMA and type are mandatory [ 33.659033] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996 [ 33.662189] I/O, IRQ, DMA and type are mandatory [ 33.664091] sb: Init: Starting Probe... [ 33.665784] sb: Init: Done [ 33.667090] Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc [ 33.670357] MIDI Loopback device driver [ 33.675719] usbcore: registered new interface driver snd-usb-audio [ 33.678444] usbcore: registered new interface driver snd-usb-usx2y [ 33.681401] usbcore: registered new interface driver snd-usb-us122l [ 33.683922] usbcore: registered new interface driver snd-usb-caiaq [ 33.690430] Error: Driver 'da9055' is already registered, aborting... [ 33.704065] oprofile: using timer interrupt. [ 33.706036] NET: Registered protocol family 15 [ 33.708161] NET: Registered protocol family 4 [ 33.709881] NET: Registered protocol family 5 [ 33.711669] NET: Registered protocol family 9 [ 33.713216] X.25 for Linux Version 0.2 [ 33.715103] can: controller area network core (rev 20120528 abi 9) [ 33.717486] NET: Registered protocol family 29 [ 33.719061] can: raw protocol (rev 20120528) [ 33.720788] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.722657] Bluetooth: BNEP filters: multicast [ 33.724272] Bluetooth: BNEP socket layer initialized [ 33.726241] lec:lane_module_init: lec.c: initialized [ 33.728158] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 33.733058] DECnet: Routing cache hash table of 256 buckets, 9Kbytes [ 33.735916] NET: Registered protocol family 12 [ 33.737652] NET: Registered protocol family 35 [ 33.739859] NET: Registered protocol family 37 [ 33.742057] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version 14) loaded [ 33.744859] openvswitch: Open vSwitch switching datapath [ 33.748020] NET: Registered protocol family 40 [ 33.749664] mpls_gso: MPLS GSO support [ 33.755009] [ 33.755009] printing PIC contents [ 33.756784] ... PIC IMR: ffff [ 33.757926] ... PIC IRR: 1013 [ 33.759096] ... PIC ISR: 0000 [ 33.760323] ... PIC ELCR: 0c00 [ 33.761532] printing local APIC contents on CPU#0/0: [ 33.763791] ... APIC ID: 00000000 (0) [ 33.765648] ... APIC VERSION: 00050014 [ 33.767344] ... APIC TASKPRI: 00000000 (00) [ 33.769218] ... APIC PROCPRI: 00000000 [ 33.770032] ... APIC LDR: 01000000 [ 33.770032] ... APIC DFR: ffffffff [ 33.770032] ... APIC SPIV: 000001ff [ 33.770032] ... APIC ISR field: [ 33.770032] 0000000000000000000000000000000000000000000000000000000000000000 [ 33.770032] ... APIC TMR field: [ 33.770032] 0000000002000000000000000000000000000000000000000000000000000000 [ 33.770032] ... APIC IRR field: [ 33.770032] 0000000000000000000000000000000000000000000000000000000000008000 [ 33.770032] ... APIC ESR: 00000000 [ 33.770032] ... APIC ICR: 000008fd [ 33.770032] ... APIC ICR2: 02000000 [ 33.770032] ... APIC LVTT: 000000ef [ 33.770032] ... APIC LVTPC: 00010000 [ 33.770032] ... APIC LVT0: 00010700 [ 33.770032] ... APIC LVT1: 00000400 [ 33.770032] ... APIC LVTERR: 000000fe [ 33.770032] ... APIC TMICT: 00097e80 [ 33.770032] ... APIC TMCCT: 00000000 [ 33.770032] ... APIC TDCR: 00000003 [ 33.770032] [ 33.809388] number of MP IRQ sources: 15. [ 33.811011] number of IO-APIC #0 registers: 24. [ 33.813346] testing the IO APIC....................... [ 33.815706] IO APIC #0...... [ 33.816781] .... register #00: 00000000 [ 33.818189] ....... : physical APIC id: 00 [ 33.819766] ....... : Delivery Type: 0 [ 33.821317] ....... : LTS : 0 [ 33.822782] .... register #01: 00170011 [ 33.824185] ....... : max redirection entries: 17 [ 33.826005] ....... : PRQ implemented: 0 [ 33.827555] ....... : IO APIC version: 11 [ 33.829120] .... register #02: 00000000 [ 33.830585] ....... : arbitration: 00 [ 33.832045] .... IRQ redirection table: [ 33.833999] 1 0 0 0 0 0 0 00 [ 33.835689] 0 0 0 0 0 1 1 31 [ 33.837397] 0 0 0 0 0 1 1 30 [ 33.839071] 0 0 0 0 0 1 1 33 [ 33.841195] 1 0 0 0 0 1 1 34 [ 33.843095] 1 1 0 0 0 1 1 35 [ 33.845137] 0 0 0 0 0 1 1 36 [ 33.846986] 0 0 0 0 0 1 1 37 [ 33.849117] 0 0 0 0 0 1 1 38 [ 33.850996] 0 1 0 0 0 1 1 39 [ 33.852987] 1 1 0 0 0 1 1 3A [ 33.855327] 1 1 0 0 0 1 1 3B [ 33.857429] 0 0 0 0 0 1 1 3C [ 33.859280] 0 0 0 0 0 1 1 3D [ 33.861460] 0 0 0 0 0 1 1 3E [ 33.863281] 0 0 0 0 0 1 1 3F [ 33.865438] 1 0 0 0 0 0 0 00 [ 33.867195] 1 0 0 0 0 0 0 00 [ 33.869261] 1 0 0 0 0 0 0 00 [ 33.871284] 1 0 0 0 0 0 0 00 [ 33.873949] 1 0 0 0 0 0 0 00 [ 33.875895] 1 0 0 0 0 0 0 00 [ 33.877907] 1 0 0 0 0 0 0 00 [ 33.879697] 1 0 0 0 0 0 0 00 [ 33.884122] IRQ to pin mappings: [ 33.885425] IRQ0 -> 0:2 [ 33.886509] IRQ1 -> 0:1 [ 33.887587] IRQ3 -> 0:3 [ 33.888864] IRQ4 -> 0:4 [ 33.889931] IRQ5 -> 0:5 [ 33.891111] IRQ6 -> 0:6 [ 33.892405] IRQ7 -> 0:7 [ 33.893889] IRQ8 -> 0:8 [ 33.894969] IRQ9 -> 0:9 [ 33.896251] IRQ10 -> 0:10 [ 33.897401] IRQ11 -> 0:11 [ 33.898556] IRQ12 -> 0:12 [ 33.899695] IRQ13 -> 0:13 [ 33.901129] IRQ14 -> 0:14 [ 33.902482] IRQ15 -> 0:15 [ 33.903621] .................................... done. [ 33.905858] Using IPI No-Shortcut mode [ 33.908848] registered taskstats version 1 [ 33.913679] Key type encrypted registered [ 33.917062] RIO: rio_register_scan for mport_id=-1 [ 33.923499] console [netcon0] enabled [ 33.924837] netconsole: network logging started [ 33.926708] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 33.928841] EDD information not available. [ 33.930752] ALSA device list: [ 33.931852] No soundcards found. [ 33.938077] Freeing unused kernel memory: 932K (83cac000 - 83d95000) [ 33.943021] Write protecting the kernel text: 24108k [ 33.945915] Write protecting the kernel read-only data: 14092k /etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: No such file or directory Please wait: booting... Starting udev [ 35.460430] EXT4-fs (zram0): unable to read superblock [ 35.468737] EXT3-fs (zram0): error: unable to read superblock [ 35.474268] EXT2-fs (zram0): error: unable to read superblock [ 35.501738] MINIX-fs: blocksize too small for device [ 35.509687] REISERFS warning (device zram0): sh-2006 read_super_block: bread failed (dev zram0, block 2, size 4096) [ 35.516867] REISERFS warning (device zram0): sh-2006 read_super_block: bread failed (dev zram0, block 16, size 4096) [ 35.527721] EXT3-fs (zram0): error: unable to read superblock [ 35.536435] EXT2-fs (zram0): error: unable to read superblock [ 35.542614] EXT4-fs (zram0): unable to read superblock [ 35.549729] MINIX-fs: blocksize too small for device [ 35.556644] isofs_fill_super: bread failed, dev=zram0, iso_blknum=16, block=0 [ 35.600682] VFS: could not find a valid V7 on zram0. [ 35.607024] UFS: failed to set blocksize [ 35.633208] qnx4: unable to read the superblock [ 35.635867] qnx6: unable to set blocksize [ 35.638410] ADFS-fs error (device zram0): adfs_fill_super: unable to read superblock [ 35.662564] ------------[ cut here ]------------ [ 35.664652] WARNING: CPU: 0 PID: 361 at lib/debugobjects.c:260 debug_print_object+0x94/0xa2() [ 35.669001] ODEBUG: free active (active state 0) object type: work_struct hint: xfs_buf_iodone_work+0x0/0xfe [ 35.670149] CPU: 0 PID: 361 Comm: mount Not tainted 3.12.0-rc2-next-20130927-03100-ga0cf1ab #3 [ 35.670149] 00000000 00000000 8a299d30 8275c9a2 8a299d70 00000000 00000104 8a299d60 [ 35.670149] 8103f5e3 8334fafe 8a299d8c 00000169 8334fb3b 00000104 817001fb 817001fb [ 35.670149] 8a73ebd8 8355b58c 83323588 8a299d78 8103f641 00000009 8a299d70 8334fafe [ 35.670149] Call Trace: [ 35.670149] [<8275c9a2>] dump_stack+0x7a/0xaa [ 35.670149] [<8103f5e3>] warn_slowpath_common+0x8c/0xa3 [ 35.670149] [<817001fb>] ? debug_print_object+0x94/0xa2 [ 35.670149] [<817001fb>] ? debug_print_object+0x94/0xa2 [ 35.670149] [<8103f641>] warn_slowpath_fmt+0x2e/0x30 [ 35.670149] [<817001fb>] debug_print_object+0x94/0xa2 [ 35.670149] [<81344703>] ? xfs_buf_unlock+0x17f/0x17f [ 35.670149] [<81700f1a>] debug_check_no_obj_freed+0xe2/0x1f8 [ 35.670149] [<8115aaa1>] kmem_cache_free+0xfe/0x32b [ 35.670149] [<81342be0>] xfs_buf_free+0x263/0x26f [ 35.670149] [<81343a71>] xfs_buf_rele+0x3e0/0x3f0 [ 35.670149] [<813635f6>] ? xfs_readsb+0x25e/0x268 [ 35.670149] [<813635f6>] xfs_readsb+0x25e/0x268 [ 35.670149] [<827243a5>] ? register_cpu_notifier+0x20/0x27 [ 35.670149] [<81367344>] xfs_fs_fill_super+0x27d/0x495 [ 35.670149] [<813670c7>] ? xfs_finish_flags+0x24e/0x24e [ 35.670149] [<811666bf>] mount_bdev+0x1d6/0x256 [ 35.670149] [<813670c7>] ? xfs_finish_flags+0x24e/0x24e [ 35.670149] [<8115a80b>] ? __kmalloc_track_caller+0x21a/0x3b2 [ 35.670149] [<816d87d6>] ? ida_get_new_above+0x24a/0x25b [ 35.670149] [<81364b69>] xfs_fs_mount+0x1a/0x1f [ 35.670149] [<813670c7>] ? xfs_finish_flags+0x24e/0x24e [ 35.670149] [<81166a09>] mount_fs+0x38/0x1b3 [ 35.670149] [<811395a4>] ? __alloc_percpu+0xa/0xc [ 35.670149] [<8118b7ff>] ? alloc_vfsmnt+0x108/0x1d6 [ 35.670149] [<8118ca68>] vfs_kern_mount+0x97/0x123 [ 35.670149] [<8118ef8f>] do_mount+0xc8e/0xe0d [ 35.670149] [<8118e2e3>] ? copy_mount_string+0x51/0x6f [ 35.670149] [<8118f1ee>] SyS_mount+0xe0/0x10d [ 35.670149] [<827889ff>] syscall_call+0x7/0xb [ 35.670149] ---[ end trace d814169ab0ed4dd3 ]--- [ 35.670149] BUG: sleeping function called from invalid context at kernel/workqueue.c:2810 [ 35.670149] in_atomic(): 0, irqs_disabled(): 1, pid: 361, name: mount [ 35.670149] 1 lock held by mount/361: [ 35.670149] #0: (&type->s_umount_key#34/1){+.+.+.}, at: [<811653be>] sget+0x3d6/0x637 [ 35.670149] irq event stamp: 7098 [ 35.670149] hardirqs last enabled at (7097): [<8111f635>] free_hot_cold_page+0x181/0x192 [ 35.670149] hardirqs last disabled at (7098): [<8115aa67>] kmem_cache_free+0xc4/0x32b [ 35.670149] softirqs last enabled at (6714): [<81045986>] __do_softirq+0x4ac/0x4db [ 35.670149] softirqs last disabled at (6687): [<81045b17>] irq_exit+0x7d/0xf9 [ 35.670149] CPU: 0 PID: 361 Comm: mount Tainted: G W 3.12.0-rc2-next-20130927-03100-ga0cf1ab #3 [ 35.670149] 00000000 00000000 8a299ca4 8275c9a2 00000169 00000000 00000000 8a299ccc [ 35.670149] 810839ec 832cbaff 00000000 00000001 00000169 8a2f0cc0 8a058eb8 8a058ec8 [ 35.670149] 00000000 8a299d48 81061709 008fc482 00000001 8a2f0ad0 00000046 00000046 [ 35.670149] Call Trace: [ 35.670149] [<8275c9a2>] dump_stack+0x7a/0xaa [ 35.670149] [<810839ec>] __might_sleep+0x238/0x240 [ 35.670149] [<81061709>] __flush_work+0x27/0x2a1 [ 35.670149] [<810ae849>] ? __lock_is_held+0x2e/0x44 [ 35.670149] [<8106426f>] ? drain_workqueue+0x365/0x365 [ 35.670149] [<810642be>] flush_work+0x4f/0x56 [ 35.670149] [<8106426f>] ? drain_workqueue+0x365/0x365 [ 35.670149] [<8106441b>] __cancel_work_timer+0x156/0x1f9 [ 35.670149] [<810644ca>] ? cancel_work_sync+0xc/0xc [ 35.670149] [<810644c8>] cancel_work_sync+0xa/0xc [ 35.670149] [<810644da>] work_fixup_free+0x10/0x27 [ 35.670149] [<816ffffb>] debug_object_fixup+0x27/0x35 [ 35.670149] [<81700f3d>] debug_check_no_obj_freed+0x105/0x1f8 [ 35.670149] [<8115aaa1>] kmem_cache_free+0xfe/0x32b [ 35.670149] [<81342be0>] xfs_buf_free+0x263/0x26f [ 35.670149] [<81343a71>] xfs_buf_rele+0x3e0/0x3f0 [ 35.670149] [<813635f6>] ? xfs_readsb+0x25e/0x268 [ 35.670149] [<813635f6>] xfs_readsb+0x25e/0x268 [ 35.670149] [<827243a5>] ? register_cpu_notifier+0x20/0x27 [ 35.670149] [<81367344>] xfs_fs_fill_super+0x27d/0x495 [ 35.670149] [<813670c7>] ? xfs_finish_flags+0x24e/0x24e [ 35.670149] [<811666bf>] mount_bdev+0x1d6/0x256 [ 35.670149] [<813670c7>] ? xfs_finish_flags+0x24e/0x24e [ 35.670149] [<8115a80b>] ? __kmalloc_track_caller+0x21a/0x3b2 [ 35.670149] [<816d87d6>] ? ida_get_new_above+0x24a/0x25b [ 35.670149] [<81364b69>] xfs_fs_mount+0x1a/0x1f [ 35.670149] [<813670c7>] ? xfs_finish_flags+0x24e/0x24e [ 35.670149] [<81166a09>] mount_fs+0x38/0x1b3 [ 35.670149] [<811395a4>] ? __alloc_percpu+0xa/0xc [ 35.670149] [<8118b7ff>] ? alloc_vfsmnt+0x108/0x1d6 [ 35.670149] [<8118ca68>] vfs_kern_mount+0x97/0x123 [ 35.670149] [<8118ef8f>] do_mount+0xc8e/0xe0d [ 35.670149] [<8118e2e3>] ? copy_mount_string+0x51/0x6f [ 35.670149] [<8118f1ee>] SyS_mount+0xe0/0x10d [ 35.670149] [<827889ff>] syscall_call+0x7/0xb [ 35.877144] grow_buffers: requested out-of-range block 4503599627370495 for device zram0 [ 35.880821] NILFS: unable to read superblock [ 35.883432] BeFS(zram0): No write support. Marking filesystem read-only [ 35.886476] BeFS(zram0): unable to read superblock [ 35.889310] (mount,361,0):ocfs2_get_sector:1861 ERROR: status = -5 [ 35.892226] (mount,361,0):ocfs2_sb_probe:770 ERROR: status = -5 [ 35.894793] (mount,361,0):ocfs2_fill_super:1038 ERROR: superblock probe failed! [ 35.897836] (mount,361,0):ocfs2_fill_super:1229 ERROR: status = -5 [ 35.901698] gfs2: error -5 reading superblock [ 35.904062] GFS2: gfs2 mount does not exist [ 35.906488] F2FS-fs (zram0): unable to read first superblock [ 35.908941] F2FS-fs (zram0): unable to read second superblock Starting Bootlog daemon: bootlogd. [ 36.114168] GFS2: path_lookup on rootfs returned error -2 Configuring network interfaces... ifconfig: socket: Address family not supported by protocol done. hwclock: can't open '/dev/misc/rtc': No such file or directory Running postinst /etc/rpm-postinsts/100... wfg: skip syslogd Kernel tests: Boot OK!Kernel tests: Boot OK! Trinity v1.0 Dave Jones 2012 Trinity v1.0 Dave Jones 2012 Trinity v1.0 Dave Jones 2012 No idea what syscall (get_robust_list) is. Trinity v1.0 Dave Jones 2012 No idea what syscall (get_robust_list) is. Don't run as root (or pass --dangerous if you know what you are doing). Couldn't find socket cachefile. Regenerating. fcntl F_WRLCK F_SETLKW: Permission denied BUG: kernel boot oops Elapsed time: 40 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-j0-10042023/a0cf1abc25ac197dd97b857c0f6341066a8cb1cf/vmlinuz-3.12.0-rc2-next-20130927-03100-ga0cf1ab -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-j0-10042023/next:master/.vmlinuz-a0cf1abc25ac197dd97b857c0f6341066a8cb1cf-20131004225358-4-jaketown branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-j0-10042023/a0cf1abc25ac197dd97b857c0f6341066a8cb1cf/vmlinuz-3.12.0-rc2-next-20130927-03100-ga0cf1ab' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::13376-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -pidfile /dev/shm/kboot/pid-yocto-jaketown-25 -serial file:/dev/shm/kboot/serial-yocto-jaketown-25 -daemonize -display none -monitor null