| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <525814A9.7060106@ti.com>
Date: Fri, 11 Oct 2013 18:09:29 +0300
From: Roger Quadros <rogerq@...com>
To: Kishon Vijay Abraham I <kishon@...com>
CC: <balbi@...com>, <bcousson@...libre.com>, <tony@...mide.com>,
<rob.herring@...xeda.com>, <pawel.moll@....com>,
<mark.rutland@....com>, <linux@....linux.org.uk>,
<grant.likely@...aro.org>, <s.nawrocki@...sung.com>,
<galak@...eaurora.org>, <swarren@...dotorg.org>,
<ian.campbell@...rix.com>, <rob@...dley.net>,
<george.cherian@...com>, <gregkh@...uxfoundation.org>,
<linux-doc@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
Hi,
On 09/02/2013 06:43 PM, Kishon Vijay Abraham I wrote:
> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
> power_on and power_off the following APIs are used phy_init(), phy_exit(),
> phy_power_on() and phy_power_off().
>
> However using the old USB phy library wont be removed till the PHYs of all
> other SoC's using dwc3 core is adapted to the Generic PHY Framework.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
> ---
> Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++-
> drivers/usb/dwc3/Kconfig | 1 +
> drivers/usb/dwc3/core.c | 49 ++++++++++++++++++++++++
> drivers/usb/dwc3/core.h | 7 ++++
> 4 files changed, 61 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> index e807635..471366d 100644
> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> @@ -6,11 +6,13 @@ Required properties:
> - compatible: must be "snps,dwc3"
> - reg : Address and length of the register set for the device
> - interrupts: Interrupts used by the dwc3 controller.
> +
> +Optional properties:
> - usb-phy : array of phandle for the PHY device. The first element
> in the array is expected to be a handle to the USB2/HS PHY and
> the second element is expected to be a handle to the USB3/SS PHY
> -
> -Optional properties:
> + - phys: from the *Generic PHY* bindings
> + - phy-names: from the *Generic PHY* bindings
> - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
>
> This is usually a subnode to DWC3 glue to which it is connected.
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index cfc16dd..ad7ce83 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -3,6 +3,7 @@ config USB_DWC3
> depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
> depends on EXTCON
> select USB_PHY
> + select GENERIC_PHY
> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
> help
> Say Y or M here if your system has a Dual Role SuperSpeed
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 428c29e..485d365 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
>
> usb_phy_init(dwc->usb2_phy);
> usb_phy_init(dwc->usb3_phy);
How about adding
+ if (dwc->usb2_phy)
+ usb_phy_init(dwc->usb2_phy);
+ if (dwc->usb3_phy)
+ usb_phy_init(dwc->usb3_phy);
both usb phy and generic phy shouldn't be present together.
> +
> + if (dwc->usb2_generic_phy)
> + phy_init(dwc->usb2_generic_phy);
> + if (dwc->usb3_generic_phy)
> + phy_init(dwc->usb3_generic_phy);
> +
> mdelay(100);
>
> /* Clear USB3 PHY reset */
> @@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc)
> {
> usb_phy_shutdown(dwc->usb2_phy);
> usb_phy_shutdown(dwc->usb3_phy);
here as well
> +
> + if (dwc->usb2_generic_phy)
> + phy_power_off(dwc->usb2_generic_phy);
> + if (dwc->usb3_generic_phy)
> + phy_power_off(dwc->usb3_generic_phy);
> }
>
> #define DWC3_ALIGN_MASK (16 - 1)
> @@ -427,6 +438,23 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
> }
>
> + if (of_property_read_bool(node, "phys") || pdata->has_phy) {
> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
> + if (IS_ERR(dwc->usb2_generic_phy)) {
> + dev_err(dev, "no usb2 phy configured yet");
> + return PTR_ERR(dwc->usb2_generic_phy);
> + }
> +
> + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
> + if (IS_ERR(dwc->usb3_generic_phy)) {
> + dev_err(dev, "no usb3 phy configured yet");
> + return PTR_ERR(dwc->usb3_generic_phy);
> + }
better to add
+ /* Don't use USB PHY if generic PHY was found */
+ dwc->usb2_phy = dwc->usb3_phy = NULL;
> + } else {
not required as we've used kzalloc for dwc.
> + dwc->usb2_generic_phy = NULL;
> + dwc->usb3_generic_phy = NULL;
> + }
> +
> /* default to superspeed if no maximum_speed passed */
> if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
> dwc->maximum_speed = USB_SPEED_SUPER;
> @@ -450,6 +478,11 @@ static int dwc3_probe(struct platform_device *pdev)
if (dwc->usb2_phy)
> usb_phy_set_suspend(dwc->usb2_phy, 0);
if (dwc->usb3_phy)
> usb_phy_set_suspend(dwc->usb3_phy, 0);
>
> + if (dwc->usb2_generic_phy)
> + phy_power_on(dwc->usb2_generic_phy);
> + if (dwc->usb3_generic_phy)
> + phy_power_on(dwc->usb3_generic_phy);
> +
> spin_lock_init(&dwc->lock);
> platform_set_drvdata(pdev, dwc);
>
> @@ -576,6 +609,11 @@ static int dwc3_remove(struct platform_device *pdev)
if (dwc->usb2_phy)
> usb_phy_set_suspend(dwc->usb2_phy, 1);
if (dwc->usb3_phy)
> usb_phy_set_suspend(dwc->usb3_phy, 1);
>
> + if (dwc->usb2_generic_phy)
> + phy_power_off(dwc->usb2_generic_phy);
> + if (dwc->usb3_generic_phy)
> + phy_power_off(dwc->usb3_generic_phy);
> +
> pm_runtime_put(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
>
> @@ -673,6 +711,11 @@ static int dwc3_suspend(struct device *dev)
if (dwc->usb3_phy)
> usb_phy_shutdown(dwc->usb3_phy);
if (dwc->usb2_phy)
> usb_phy_shutdown(dwc->usb2_phy);
>
> + if (dwc->usb2_generic_phy)
> + phy_exit(dwc->usb2_generic_phy);
> + if (dwc->usb3_generic_phy)
> + phy_exit(dwc->usb3_generic_phy);
> +
> return 0;
> }
>
> @@ -683,6 +726,12 @@ static int dwc3_resume(struct device *dev)
>
if (dwc->usb3_phy)
> usb_phy_init(dwc->usb3_phy);
if (dwc->usb2_phy)
> usb_phy_init(dwc->usb2_phy);
> +
> + if (dwc->usb2_generic_phy)
> + phy_init(dwc->usb2_generic_phy);
> + if (dwc->usb3_generic_phy)
> + phy_init(dwc->usb3_generic_phy);
> +
> msleep(100);
>
> spin_lock_irqsave(&dwc->lock, flags);
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index f8af8d4..01ec7d7 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -31,6 +31,8 @@
> #include <linux/usb/gadget.h>
> #include <linux/usb/otg.h>
>
> +#include <linux/phy/phy.h>
> +
> /* Global constants */
> #define DWC3_EP0_BOUNCE_SIZE 512
> #define DWC3_ENDPOINTS_NUM 32
> @@ -613,6 +615,8 @@ struct dwc3_scratchpad_array {
> * @dr_mode: requested mode of operation
> * @usb2_phy: pointer to USB2 PHY
> * @usb3_phy: pointer to USB3 PHY
> + * @usb2_generic_phy: pointer to USB2 PHY
> + * @usb3_generic_phy: pointer to USB3 PHY
> * @dcfg: saved contents of DCFG register
> * @gctl: saved contents of GCTL register
> * @is_selfpowered: true when we are selfpowered
> @@ -665,6 +669,9 @@ struct dwc3 {
> struct usb_phy *usb2_phy;
> struct usb_phy *usb3_phy;
>
> + struct phy *usb2_generic_phy;
> + struct phy *usb3_generic_phy;
> +
> void __iomem *regs;
> size_t regs_size;
>
>
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists