[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <525BB3B7.7000802@monstr.eu>
Date: Mon, 14 Oct 2013 11:04:55 +0200
From: Michal Simek <monstr@...str.eu>
To: Soren Brinkmann <soren.brinkmann@...inx.com>
CC: Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Landley <rob@...dley.net>,
Russell King <linux@....linux.org.uk>,
Mike Turquette <mturquette@...aro.org>,
Michal Simek <michal.simek@...inx.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-doc@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v2 1/2] clk/zynq/clkc: Add 'fclk-enable' feature
On 10/10/2013 07:10 PM, Soren Brinkmann wrote:
> In some use cases Zynq's FPGA clocks are used as static clock
> generators for IP in the FPGA part of the SOC for which no Linux driver
> exists and would control those clocks. To avoid automatic
> gating of these clocks in such cases a new property - fclk-enable - is
> added to the clock controller's DT description to accomodate such use
> cases. It's value is a bitmask, where a set bit results in enabling
> the corresponding FCLK through the clkc.
>
> FPGA clocks are handled following the rules below:
>
> If an FCLK is not enabled by bootloaders, that FCLK will be disabled in
> Linux. Drivers can enable and control it through the CCF as usual.
>
> If an FCLK is enabled by bootloaders AND the corresponding bit in the
> 'fclk-enable' DT property is set, that FCLK will be enabled by the clkc,
> resulting in an off by one reference count for that clock. Ensuring it
> will always be running.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
> ---
> v2:
> - change default value for fclk-enable to '0'
> ---
> Documentation/devicetree/bindings/clock/zynq-7000.txt | 4 ++++
> drivers/clk/zynq/clkc.c | 18 +++++++++++++++---
> 2 files changed, 19 insertions(+), 3 deletions(-)
For both patches:
Acked-by: Michal Simek <michal.simek@...inx.com>
Mike: Can you please add both these patches to your tree?
There shouldn't be any conflict with DT patch itself.
But if you don't want to add 2/2 through your tree, I am also fine
with taking this through my zynq tree.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
Download attachment "signature.asc" of type "application/pgp-signature" (264 bytes)
Powered by blists - more mailing lists