linux-kernel - [PATCH] phy: omap: Adapt phy-omap-usb2 for AM437x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1381754603-11581-1-git-send-email-george.cherian@ti.com>
Date:	Mon, 14 Oct 2013 18:13:23 +0530
From:	George Cherian <george.cherian@...com>
To:	<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>,
	<devicetree@...r.kernel.org>
CC:	<tony@...mide.com>, <balbi@...com>, <kishon@...com>,
	<rob@...dley.net>, <ijc+devicetree@...lion.org.uk>,
	<swarren@...dotorg.org>, <mark.rutland@....com>,
	<pawel.moll@....com>, <rob.herring@...xeda.com>,
	George Cherian <george.cherian@...com>
Subject: [PATCH] phy: omap: Adapt phy-omap-usb2 for AM437x

This patch adds a compatible for AM437x "ti,am43xx-usb2" to
reuse the same phy-omap-usb2 driver.

Also updated the documentation to add the new compatible.

Signed-off-by: George Cherian <george.cherian@...com>
---
 Documentation/devicetree/bindings/usb/usb-phy.txt |  2 +-
 drivers/phy/phy-omap-usb2.c                       | 13 ++++++++++---
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
index c0245c8..d5a7f21 100644
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
@@ -3,7 +3,7 @@ USB PHY
 OMAP USB2 PHY
 
 Required properties:
- - compatible: Should be "ti,omap-usb2"
+ - compatible: Should be "ti,omap-usb2" or "ti,am437x-usb2"
  - reg : Address and length of the register set for the device.
  - #phy-cells: determine the number of cells that should be given in the
    phandle while referencing this phy.
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index bfc5c33..0529c83 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/usb/omap_control_usb.h>
 #include <linux/phy/phy.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 
 /**
@@ -172,7 +173,10 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	phy->dev		= &pdev->dev;
 
 	phy->phy.dev		= phy->dev;
-	phy->phy.label		= "omap-usb2";
+	if (of_device_is_compatible(node, "ti,am437x-usb2"))
+		phy->phy.label		= "am437x-usb2";
+	else
+		phy->phy.label		= "omap-usb2";
 	phy->phy.set_suspend	= omap_usb2_suspend;
 	phy->phy.otg		= otg;
 	phy->phy.type		= USB_PHY_TYPE_USB2;
@@ -201,8 +205,10 @@ static int omap_usb2_probe(struct platform_device *pdev)
 
 	otg->set_host		= omap_usb_set_host;
 	otg->set_peripheral	= omap_usb_set_peripheral;
-	otg->set_vbus		= omap_usb_set_vbus;
-	otg->start_srp		= omap_usb_start_srp;
+	if (of_device_is_compatible(node, "ti,omap-usb2")) {
+		otg->set_vbus		= omap_usb_set_vbus;
+		otg->start_srp		= omap_usb_start_srp;
+	}
 	otg->phy		= &phy->phy;
 
 	platform_set_drvdata(pdev, phy);
@@ -300,6 +306,7 @@ static const struct dev_pm_ops omap_usb2_pm_ops = {
 #ifdef CONFIG_OF
 static const struct of_device_id omap_usb2_id_table[] = {
 	{ .compatible = "ti,omap-usb2" },
+	{ .compatible = "ti,am437x-usb2" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
-- 
1.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/