| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <525BFD1B.5080709@ti.com>
Date: Mon, 14 Oct 2013 10:18:03 -0400
From: Eduardo Valentin <eduardo.valentin@...com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
CC: Eduardo Valentin <eduardo.valentin@...com>,
Naveen Krishna Chatradhi <ch.naveen@...sung.com>,
<linux-pm@...r.kernel.org>, <naveenkrishna.ch@...il.com>,
<rui.zhang@...el.com>, <linux-samsung-soc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <amit.daniel@...sung.com>,
<kgene.kim@...sung.com>, <devicetree@...r.kernel.org>,
Lukasz Majewski <l.majewski@...sung.com>
Subject: Re: [PATCH 1/3 v4] thermal: samsung: correct the fall interrupt en,
status bit fields
On 11-10-2013 11:57, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Friday, October 11, 2013 11:10:38 AM Eduardo Valentin wrote:
>> Hi Naveen,
>>
>> On 09-10-2013 10:03, Bartlomiej Zolnierkiewicz wrote:
>>>
>>> Hi,
>>>
>>> All patches (#1-#3) look good to me, FWIW you can add:
>>>
>>> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
>>>
>>> Please note that (at least) patch #3 conflicts with Lukasz's EXYNOS4412
>>> fixup patchset:
>>>
>>> https://lkml.org/lkml/2013/10/9/35
>>>
>>> It is up to Eduardo to resolve this but it probably would be better to
>>> merge EXYNOS4412 fixes first and then add EXYNOS5420 support. This would
>>> require you to port patch #3 over Lukasz's patchset though.
>>
>> My question is if this fix applies also to EXYNOS4412, as it is not
>> mentioned in the patch description and the change affects all supported
>
> This patch doesn't affect EXYNOS4210 as exynos4210_tmu_registers struct
I was, at least for now, worried about 4412, as I mentioned above.
> uses the default zero value for inten_fall_mask, inten_fall_shift and
> intclr_fall_shift.
>
>> chip version deliberately. Has this change been validated on all
>> supported chip versions?
>>
>> Amit, I saw you ack, but still, it is not clear how this change behaves
>> across supported hardware.
>
> For EXYNOS4412 and EXYNOS5250 this patch doesn't cause any functionality
> changes because while the patch changes inten_fall_shift usage to
> intclr_fall_shift one in exynos_tmu_initialize() it defines
> EXYNOS_TMU_CLEAR_FALL_INT_SHIFT to 12 (old EXYNOS_TMU_FALL_INT_SHIFT
> value).
>
OK. Then the patch is about a symbol rename, right?
> This patch only changes driver behavior for EXYNOS5440 on which the
> used shift value changes from 4 to 12.
I see.
>
> PS I've only noticed it now but after this patch inten_fall_shift becomes
> unused and can be removed.
>
Then we should remove it.
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>>>
>>> Best regards,
>>> --
>>> Bartlomiej Zolnierkiewicz
>>> Samsung R&D Institute Poland
>>> Samsung Electronics
>>>
>>> On Wednesday, October 09, 2013 05:38:27 PM Naveen Krishna Chatradhi wrote:
>>>> The FALL interrupt related en, status bits are available at an offset of
>>>> 16 on INTEN, INTSTAT registers and at an offset of
>>>> 12 on INTCLEAR register.
>>>>
>>>> This patch corrects the same for exyns5250 and exynos5440
>>>>
>>>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
>>>> ---
>>>> Changes since v1:
>>>> Changes since v2:
>>>> Changes since v3:
>>>> None
>>>>
>>>> drivers/thermal/samsung/exynos_tmu.c | 2 +-
>>>> drivers/thermal/samsung/exynos_tmu.h | 2 ++
>>>> drivers/thermal/samsung/exynos_tmu_data.c | 2 ++
>>>> drivers/thermal/samsung/exynos_tmu_data.h | 3 ++-
>>>> 4 files changed, 7 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>>>> index b43afda..af69209 100644
>>>> --- a/drivers/thermal/samsung/exynos_tmu.c
>>>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>>>> @@ -265,7 +265,7 @@ skip_calib_data:
>>>> data->base + reg->threshold_th1);
>>>>
>>>> writel((reg->inten_rise_mask << reg->inten_rise_shift) |
>>>> - (reg->inten_fall_mask << reg->inten_fall_shift),
>>>> + (reg->inten_fall_mask << reg->intclr_fall_shift),
>>>> data->base + reg->tmu_intclear);
>>>>
>>>> /* if last threshold limit is also present */
>>>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>>>> index b364c9e..7c6c34a 100644
>>>> --- a/drivers/thermal/samsung/exynos_tmu.h
>>>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>>>> @@ -134,6 +134,7 @@ enum soc_type {
>>>> * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
>>>> * @tmu_intstat: Register containing the interrupt status values.
>>>> * @tmu_intclear: Register for clearing the raised interrupt status.
>>>> + * @intclr_fall_shift: shift bits for interrupt clear fall 0
>>>> * @emul_con: TMU emulation controller register.
>>>> * @emul_temp_shift: shift bits of emulation temperature.
>>>> * @emul_time_shift: shift bits of emulation time.
>>>> @@ -204,6 +205,7 @@ struct exynos_tmu_registers {
>>>> u32 tmu_intstat;
>>>>
>>>> u32 tmu_intclear;
>>>> + u32 intclr_fall_shift;
>>>>
>>>> u32 emul_con;
>>>> u32 emul_temp_shift;
>>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>>>> index 9002499..23fea23 100644
>>>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>>>> @@ -122,6 +122,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
>>>> .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
>>>> .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
>>>> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
>>>> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
>>>> .emul_con = EXYNOS_EMUL_CON,
>>>> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>>>> .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
>>>> @@ -210,6 +211,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
>>>> .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
>>>> .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
>>>> .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
>>>> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
>>>> .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
>>>> .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
>>>> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>>>> index dc7feb5..8788a87 100644
>>>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>>>> @@ -69,9 +69,10 @@
>>>> #define EXYNOS_TMU_RISE_INT_MASK 0x111
>>>> #define EXYNOS_TMU_RISE_INT_SHIFT 0
>>>> #define EXYNOS_TMU_FALL_INT_MASK 0x111
>>>> -#define EXYNOS_TMU_FALL_INT_SHIFT 12
>>>> +#define EXYNOS_TMU_FALL_INT_SHIFT 16
>>>> #define EXYNOS_TMU_CLEAR_RISE_INT 0x111
>>>> #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
>>>> +#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
>>>> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
>>>> #define EXYNOS_TMU_TRIP_MODE_MASK 0x7
>>>> #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
>
>
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
Download attachment "signature.asc" of type "application/pgp-signature" (296 bytes)
Powered by blists - more mailing lists