| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <525C023A.8070608@ti.com>
Date: Mon, 14 Oct 2013 10:39:54 -0400
From: Santosh Shilimkar <santosh.shilimkar@...com>
To: Tejun Heo <tj@...nel.org>
CC: "yinghai@...nel.org" <yinghai@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-mm@...ck.org" <linux-mm@...ck.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Strashko, Grygorii" <grygorii.strashko@...com>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: Re: [RFC 06/23] mm/memblock: Add memblock early memory allocation
apis
On Sunday 13 October 2013 01:56 PM, Tejun Heo wrote:
> Hello,
>
> On Sat, Oct 12, 2013 at 05:58:49PM -0400, Santosh Shilimkar wrote:
>> Introduce memblock early memory allocation APIs which allow to support
>> LPAE extension on 32 bits archs. More over, this is the next step
>
[..]
>> +/* FIXME: Move to memblock.h at a point where we remove nobootmem.c */
>> +void *memblock_early_alloc_try_nid_nopanic(int nid, phys_addr_t size,
>> + phys_addr_t align, phys_addr_t from, phys_addr_t max_addr);
>> +void *memblock_early_alloc_try_nid(int nid, phys_addr_t size,
>> + phys_addr_t align, phys_addr_t from, phys_addr_t max_addr);
>
> Wouldn't it make more sense to put @nid at the end. @size is the main
> parameter here and it gets confusing with _alloc_node() interface as
> the positions of paramters change. Plus, kmalloc_node() puts @node at
> the end too.
>
Ok. Will make @nid as a last parameter.
>> +void __memblock_free_early(phys_addr_t base, phys_addr_t size);
>> +void __memblock_free_late(phys_addr_t base, phys_addr_t size);
>
> Would it be possible to drop "early"? It's redundant and makes the
> function names unnecessarily long. When memblock is enabled, these
> are basically doing about the same thing as memblock_alloc() and
> friends, right? Wouldn't it make more sense to define these as
> memblock_alloc_XXX()?
>
A small a difference w.r.t existing memblock_alloc() vs these new
exports returns virtual mapped memory pointers. Actually I started
with memblock_alloc_xxx() but then memblock already exports memblock_alloc_xx()
returning physical memory pointer. So just wanted to make these interfaces
distinct and added "early". But I agree with you that the 'early' can
be dropped. Will fix it.
>> +#define memblock_early_alloc(x) \
>> + memblock_early_alloc_try_nid(MAX_NUMNODES, x, SMP_CACHE_BYTES, \
>> + BOOTMEM_LOW_LIMIT, BOOTMEM_ALLOC_ACCESSIBLE)
>> +#define memblock_early_alloc_align(x, align) \
>> + memblock_early_alloc_try_nid(MAX_NUMNODES, x, align, \
>> + BOOTMEM_LOW_LIMIT, BOOTMEM_ALLOC_ACCESSIBLE)
>> +#define memblock_early_alloc_nopanic(x) \
>> + memblock_early_alloc_try_nid_nopanic(MAX_NUMNODES, x, SMP_CACHE_BYTES, \
>> + BOOTMEM_LOW_LIMIT, BOOTMEM_ALLOC_ACCESSIBLE)
>> +#define memblock_early_alloc_pages(x) \
>> + memblock_early_alloc_try_nid(MAX_NUMNODES, x, PAGE_SIZE, \
>> + BOOTMEM_LOW_LIMIT, BOOTMEM_ALLOC_ACCESSIBLE)
>> +#define memblock_early_alloc_pages_nopanic(x) \
>> + memblock_early_alloc_try_nid_nopanic(MAX_NUMNODES, x, PAGE_SIZE, \
>> + BOOTMEM_LOW_LIMIT, BOOTMEM_ALLOC_ACCESSIBLE)
>
> I always felt a bit weird about _pages() interface. It says pages but
> takes bytes in size. Maybe we're better off just converting the
> current _pages users to _alloc_align()?
>
I thought the pages interfaces are more for asking the memory
allocations which are page aligned. So yes, we could convert
these users to make use of align interfaces.
>> +#define memblock_early_alloc_node(nid, x) \
>> + memblock_early_alloc_try_nid(nid, x, SMP_CACHE_BYTES, \
>> + BOOTMEM_LOW_LIMIT, BOOTMEM_ALLOC_ACCESSIBLE)
>> +#define memblock_early_alloc_node_nopanic(nid, x) \
>> + memblock_early_alloc_try_nid_nopanic(nid, x, SMP_CACHE_BYTES, \
>> + BOOTMEM_LOW_LIMIT, BOOTMEM_ALLOC_ACCESSIBLE)
>
> Ditto as above. Maybe @nid can be moved to the end?
>
ok
>> +static void * __init _memblock_early_alloc_try_nid_nopanic(int nid,
>> + phys_addr_t size, phys_addr_t align,
>> + phys_addr_t from, phys_addr_t max_addr)
>> +{
>> + phys_addr_t alloc;
>> + void *ptr;
>> +
>> + if (WARN_ON_ONCE(slab_is_available())) {
>> + if (nid == MAX_NUMNODES)
>
> Shouldn't we be using NUMA_NO_NODE?
>
>> + return kzalloc(size, GFP_NOWAIT);
>> + else
>> + return kzalloc_node(size, GFP_NOWAIT, nid);
>
> And kzalloc_node() understands NUMA_NO_NODE.
>
Will try this out.
>> + }
>> +
>> + if (WARN_ON(!align))
>> + align = __alignof__(long long);
>
> Wouldn't SMP_CACHE_BYTES make more sense? Also, I'm not sure we
> actually want WARN on it. Interpreting 0 as "default align" isn't
> that weird.
>
Will drop that WARN and use SMP_CACHE_BYTES as a default.
>> + /* align @size to avoid excessive fragmentation on reserved array */
>> + size = round_up(size, align);
>> +
>> +again:
>> + alloc = memblock_find_in_range_node(from, max_addr, size, align, nid);
>> + if (alloc)
>> + goto done;
>> +
>> + if (nid != MAX_NUMNODES) {
>> + alloc =
>> + memblock_find_in_range_node(from, max_addr, size,
>> + align, MAX_NUMNODES);
>> + if (alloc)
>> + goto done;
>> + }
>> +
>> + if (from) {
>> + from = 0;
>> + goto again;
>> + } else {
>> + goto error;
>> + }
>> +
>> +done:
>> + memblock_reserve(alloc, size);
>> + ptr = phys_to_virt(alloc);
>> + memset(ptr, 0, size);
>
> What if the address is high? Don't we need kmapping here?
>
The current nobootmem code actually don't handle the high
addresses since the max memory is limited by memblock.current_limit
which is max_low_pfn. So I am assuming we don't need to support
it. __alloc_bootmem_node_high() interface underneath uses
__alloc_memory_core_early() and we tried to keep the same
functionality in new code.
>> +
>> + /*
>> + * The min_count is set to 0 so that bootmem allocated blocks
>> + * are never reported as leaks.
>> + */
>> + kmemleak_alloc(ptr, size, 0, 0);
>> +
>> + return ptr;
>> +
>> +error:
>> + return NULL;
>> +}
>> +
>> +void * __init memblock_early_alloc_try_nid_nopanic(int nid,
>> + phys_addr_t size, phys_addr_t align,
>> + phys_addr_t from, phys_addr_t max_addr)
>> +{
>> + memblock_dbg("%s: %llu bytes align=0x%llx nid=%d from=0x%llx max_addr=0x%llx %pF\n",
>> + __func__, (u64)size, (u64)align, nid, (u64)from,
>> + (u64)max_addr, (void *)_RET_IP_);
>> + return _memblock_early_alloc_try_nid_nopanic(nid, size,
>> + align, from, max_addr);
>
> Do we need the extra level of wrapping? Just implement
> alloc_try_nid_nopanic() here and make the panicky version call it?
>
It was useful to have caller information (_RET_IP_) for debug. But
it can be dropped if you insist.
Regards,
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists