| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1381768533-31756-1-git-send-email-nicolas.ferre@atmel.com>
Date: Mon, 14 Oct 2013 18:35:33 +0200
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: <linux-arm-kernel@...ts.infradead.org>, <ebenard@...rea.com>,
<linux-crypto@...r.kernel.org>, <herbert@...dor.apana.org.au>
CC: <linux-kernel@...r.kernel.org>,
Nicolas Ferre <nicolas.ferre@...el.com>
Subject: [PATCH] crypto: atmel-aes - add support for Device Tree
Add support for Device Tree and use of the DMA DT API to
get the needed channels.
Documentation is added for these DT nodes.
Initial code by: Nicolas Royer and Eukrea.
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
.../devicetree/bindings/crypto/atmel-crypto.txt | 23 ++++
drivers/crypto/atmel-aes.c | 143 ++++++++++++++-------
2 files changed, 117 insertions(+), 49 deletions(-)
create mode 100644 Documentation/devicetree/bindings/crypto/atmel-crypto.txt
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
new file mode 100644
index 0000000..d273f0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
@@ -0,0 +1,23 @@
+* Atmel HW cryptographic accelerators
+
+These are the HW cryptographic accelerators found on some Atmel products.
+
+* Advanced Encryption Standard (AES)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-aes".
+- reg: Should contain AES registers location and length.
+- interrupts: Should contain the IRQ line for the AES.
+- dmas: List of two DMA specifiers as described in
+ atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+ in the dmas property.
+
+Example:
+aes@...38000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xf8038000 0x100>;
+ interrupts = <43 4 0>;
+ dmas = <&dma1 2 18>,
+ <&dma1 2 19>;
+ dma-names = "tx", "rx";
diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c
index c1efd91..d7c9e31 100644
--- a/drivers/crypto/atmel-aes.c
+++ b/drivers/crypto/atmel-aes.c
@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
#include <linux/delay.h>
#include <linux/crypto.h>
#include <linux/cryptohash.h>
@@ -39,6 +40,7 @@
#include <crypto/hash.h>
#include <crypto/internal/hash.h>
#include <linux/platform_data/crypto-atmel.h>
+#include <dt-bindings/dma/at91.h>
#include "atmel-aes-regs.h"
#define CFB8_BLOCK_SIZE 1
@@ -747,59 +749,50 @@ static int atmel_aes_dma_init(struct atmel_aes_dev *dd,
struct crypto_platform_data *pdata)
{
int err = -ENOMEM;
- dma_cap_mask_t mask_in, mask_out;
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* Try to grab 2 DMA channels */
+ dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask,
+ atmel_aes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
+ if (!dd->dma_lch_in.chan)
+ goto err_dma_in;
+
+ dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
+ dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
+ AES_IDATAR(0);
+ dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size;
+ dd->dma_lch_in.dma_conf.src_addr_width =
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size;
+ dd->dma_lch_in.dma_conf.dst_addr_width =
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dd->dma_lch_in.dma_conf.device_fc = false;
+
+ dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask,
+ atmel_aes_filter, &pdata->dma_slave->txdata, dd->dev, "rx");
+ if (!dd->dma_lch_out.chan)
+ goto err_dma_out;
+
+ dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
+ dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
+ AES_ODATAR(0);
+ dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size;
+ dd->dma_lch_out.dma_conf.src_addr_width =
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size;
+ dd->dma_lch_out.dma_conf.dst_addr_width =
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dd->dma_lch_out.dma_conf.device_fc = false;
- if (pdata && pdata->dma_slave->txdata.dma_dev &&
- pdata->dma_slave->rxdata.dma_dev) {
-
- /* Try to grab 2 DMA channels */
- dma_cap_zero(mask_in);
- dma_cap_set(DMA_SLAVE, mask_in);
-
- dd->dma_lch_in.chan = dma_request_channel(mask_in,
- atmel_aes_filter, &pdata->dma_slave->rxdata);
-
- if (!dd->dma_lch_in.chan)
- goto err_dma_in;
-
- dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
- dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
- AES_IDATAR(0);
- dd->dma_lch_in.dma_conf.src_maxburst = dd->caps.max_burst_size;
- dd->dma_lch_in.dma_conf.src_addr_width =
- DMA_SLAVE_BUSWIDTH_4_BYTES;
- dd->dma_lch_in.dma_conf.dst_maxburst = dd->caps.max_burst_size;
- dd->dma_lch_in.dma_conf.dst_addr_width =
- DMA_SLAVE_BUSWIDTH_4_BYTES;
- dd->dma_lch_in.dma_conf.device_fc = false;
-
- dma_cap_zero(mask_out);
- dma_cap_set(DMA_SLAVE, mask_out);
- dd->dma_lch_out.chan = dma_request_channel(mask_out,
- atmel_aes_filter, &pdata->dma_slave->txdata);
-
- if (!dd->dma_lch_out.chan)
- goto err_dma_out;
-
- dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
- dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
- AES_ODATAR(0);
- dd->dma_lch_out.dma_conf.src_maxburst = dd->caps.max_burst_size;
- dd->dma_lch_out.dma_conf.src_addr_width =
- DMA_SLAVE_BUSWIDTH_4_BYTES;
- dd->dma_lch_out.dma_conf.dst_maxburst = dd->caps.max_burst_size;
- dd->dma_lch_out.dma_conf.dst_addr_width =
- DMA_SLAVE_BUSWIDTH_4_BYTES;
- dd->dma_lch_out.dma_conf.device_fc = false;
-
- return 0;
- } else {
- return -ENODEV;
- }
+ return 0;
err_dma_out:
dma_release_channel(dd->dma_lch_in.chan);
err_dma_in:
+ dev_warn(dd->dev, "no DMA channel available\n");
return err;
}
@@ -1261,6 +1254,47 @@ static void atmel_aes_get_cap(struct atmel_aes_dev *dd)
}
}
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_aes_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g46-aes" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_aes_dt_ids);
+
+static struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct crypto_platform_data *pdata;
+
+ if (!np) {
+ dev_err(&pdev->dev, "device node not found\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pdata->dma_slave = devm_kzalloc(&pdev->dev,
+ sizeof(*(pdata->dma_slave)),
+ GFP_KERNEL);
+ if (!pdata->dma_slave) {
+ dev_err(&pdev->dev, "could not allocate memory for dma_slave\n");
+ devm_kfree(&pdev->dev, pdata);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ return pdata;
+}
+#else
+static inline struct crypto_platform_data *atmel_aes_of_init(struct platform_device *pdev)
+{
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
static int atmel_aes_probe(struct platform_device *pdev)
{
struct atmel_aes_dev *aes_dd;
@@ -1272,6 +1306,14 @@ static int atmel_aes_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
if (!pdata) {
+ pdata = atmel_aes_of_init(pdev);
+ if (IS_ERR(pdata)) {
+ err = PTR_ERR(pdata);
+ goto aes_dd_err;
+ }
+ }
+
+ if (!pdata->dma_slave) {
err = -ENXIO;
goto aes_dd_err;
}
@@ -1358,7 +1400,9 @@ static int atmel_aes_probe(struct platform_device *pdev)
if (err)
goto err_algs;
- dev_info(dev, "Atmel AES\n");
+ dev_info(dev, "Atmel AES - Using %s, %s for DMA transfers\n",
+ dma_chan_name(aes_dd->dma_lch_in.chan),
+ dma_chan_name(aes_dd->dma_lch_out.chan));
return 0;
@@ -1424,6 +1468,7 @@ static struct platform_driver atmel_aes_driver = {
.driver = {
.name = "atmel_aes",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_aes_dt_ids),
},
};
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists