| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3253235f22fdcbe0f839d6ffced08ba8577c1ef0.1381848041.git.nicolas.ferre@atmel.com>
Date: Tue, 15 Oct 2013 16:43:37 +0200
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: <linux-arm-kernel@...ts.infradead.org>, <eric@...rea.com>
CC: <linux-kernel@...r.kernel.org>, <linux-crypto@...r.kernel.org>,
<herbert@...dor.apana.org.au>,
Nicolas Ferre <nicolas.ferre@...el.com>
Subject: [PATCH 2/3] crypto: atmel-sha - add support for Device Tree
Add support for Device Tree and use of the DMA DT API to
get the channels if needed.
Documentation is added for these DT nodes.
Initial code by: Nicolas Royer and Eukrea.
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
.../devicetree/bindings/crypto/atmel-crypto.txt | 22 +++++
drivers/crypto/atmel-sha.c | 99 ++++++++++++++++------
2 files changed, 97 insertions(+), 24 deletions(-)
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
index 9a24fd9..f2aab3d 100644
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
@@ -44,3 +44,25 @@ tdes@...3c000 {
<&dma1 2 21>;
dma-names = "tx", "rx";
};
+
+* Secure Hash Algorithm (SHA)
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g46-sha".
+- reg: Should contain SHA registers location and length.
+- interrupts: Should contain the IRQ line for the SHA.
+
+Optional properties:
+- dmas: One DMA specifiers as described in
+ atmel-dma.txt and dma.txt files.
+- dma-names: Contains one identifier string for each DMA specifier
+ in the dmas property. Only one "tx" string needed.
+
+Example:
+sha@...34000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xf8034000 0x100>;
+ interrupts = <42 4 0>;
+ dmas = <&dma1 2 17>;
+ dma-names = "tx";
+};
diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c
index eaed8bf..ecfdf72 100644
--- a/drivers/crypto/atmel-sha.c
+++ b/drivers/crypto/atmel-sha.c
@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
#include <linux/delay.h>
#include <linux/crypto.h>
#include <linux/cryptohash.h>
@@ -1263,32 +1264,29 @@ static int atmel_sha_dma_init(struct atmel_sha_dev *dd,
int err = -ENOMEM;
dma_cap_mask_t mask_in;
- if (pdata && pdata->dma_slave->rxdata.dma_dev) {
- /* Try to grab DMA channel */
- dma_cap_zero(mask_in);
- dma_cap_set(DMA_SLAVE, mask_in);
+ /* Try to grab DMA channel */
+ dma_cap_zero(mask_in);
+ dma_cap_set(DMA_SLAVE, mask_in);
- dd->dma_lch_in.chan = dma_request_channel(mask_in,
- atmel_sha_filter, &pdata->dma_slave->rxdata);
-
- if (!dd->dma_lch_in.chan)
- return err;
-
- dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
- dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
- SHA_REG_DIN(0);
- dd->dma_lch_in.dma_conf.src_maxburst = 1;
- dd->dma_lch_in.dma_conf.src_addr_width =
- DMA_SLAVE_BUSWIDTH_4_BYTES;
- dd->dma_lch_in.dma_conf.dst_maxburst = 1;
- dd->dma_lch_in.dma_conf.dst_addr_width =
- DMA_SLAVE_BUSWIDTH_4_BYTES;
- dd->dma_lch_in.dma_conf.device_fc = false;
-
- return 0;
+ dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask_in,
+ atmel_sha_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
+ if (!dd->dma_lch_in.chan) {
+ dev_warn(dd->dev, "no DMA channel available\n");
+ return err;
}
- return -ENODEV;
+ dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
+ dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
+ SHA_REG_DIN(0);
+ dd->dma_lch_in.dma_conf.src_maxburst = 1;
+ dd->dma_lch_in.dma_conf.src_addr_width =
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dd->dma_lch_in.dma_conf.dst_maxburst = 1;
+ dd->dma_lch_in.dma_conf.dst_addr_width =
+ DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dd->dma_lch_in.dma_conf.device_fc = false;
+
+ return 0;
}
static void atmel_sha_dma_cleanup(struct atmel_sha_dev *dd)
@@ -1326,6 +1324,48 @@ static void atmel_sha_get_cap(struct atmel_sha_dev *dd)
}
}
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_sha_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g46-sha" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_sha_dt_ids);
+
+static struct crypto_platform_data *atmel_sha_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct crypto_platform_data *pdata;
+
+ if (!np) {
+ dev_err(&pdev->dev, "device node not found\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pdata->dma_slave = devm_kzalloc(&pdev->dev,
+ sizeof(*(pdata->dma_slave)),
+ GFP_KERNEL);
+ if (!pdata->dma_slave) {
+ dev_err(&pdev->dev, "could not allocate memory for dma_slave\n");
+ devm_kfree(&pdev->dev, pdata);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ return pdata;
+}
+#else /* CONFIG_OF */
+static inline struct crypto_platform_data *atmel_sha_of_init(struct platform_device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
static int atmel_sha_probe(struct platform_device *pdev)
{
struct atmel_sha_dev *sha_dd;
@@ -1402,13 +1442,23 @@ static int atmel_sha_probe(struct platform_device *pdev)
if (sha_dd->caps.has_dma) {
pdata = pdev->dev.platform_data;
if (!pdata) {
- dev_err(&pdev->dev, "platform data not available\n");
+ pdata = atmel_sha_of_init(pdev);
+ if (IS_ERR(pdata)) {
+ dev_err(&pdev->dev, "platform data not available\n");
+ err = PTR_ERR(pdata);
+ goto err_pdata;
+ }
+ }
+ if (!pdata->dma_slave) {
err = -ENXIO;
goto err_pdata;
}
err = atmel_sha_dma_init(sha_dd, pdata);
if (err)
goto err_sha_dma;
+
+ dev_info(dev, "using %s for DMA transfers\n",
+ dma_chan_name(sha_dd->dma_lch_in.chan));
}
spin_lock(&atmel_sha.lock);
@@ -1483,6 +1533,7 @@ static struct platform_driver atmel_sha_driver = {
.driver = {
.name = "atmel_sha",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_sha_dt_ids),
},
};
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists