[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <525D6E86.1040208@ti.com>
Date: Tue, 15 Oct 2013 22:04:14 +0530
From: Balaji T K <balajitk@...com>
To: Andreas Fenkart <afenkart@...il.com>
CC: Chris Ball <cjb@...top.org>, Tony Lindgren <tony@...mide.com>,
Grant Likely <grant.likely@...retlab.ca>,
Felipe Balbi <balbi@...com>, <zonque@...il.com>,
<devicetree-discuss@...ts.ozlabs.org>,
<devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mmc@...r.kernel.org>, <linux-omap@...r.kernel.org>
Subject: Re: [PATCH v3 3/4] mmc: omap_hsmmc: Remux pins to support SDIO interrupt
on AM335x
Thanks Andreas for the patch,
On Saturday 05 October 2013 04:47 PM, Andreas Fenkart wrote:
> The am335x can't detect pending cirq in PM runtime suspend.
> This patch reconfigures dat1 as a GPIO before going to suspend.
> SDIO interrupts are detected with the GPIO, while in runtime
> suspend, standard detection of the module block otherwise.
>
> Signed-off-by: Andreas Fenkart <afenkart@...il.com>
>
> @@ -2293,23 +2440,66 @@ static int omap_hsmmc_resume(struct device *dev)
> static int omap_hsmmc_runtime_suspend(struct device *dev)
> {
> struct omap_hsmmc_host *host;
> + unsigned long flags;
> + int ret = 0;
>
> host = platform_get_drvdata(to_platform_device(dev));
> omap_hsmmc_context_save(host);
> dev_dbg(dev, "disabled\n");
>
> - return 0;
> + if (host->flags & HSMMC_SWAKEUP_QUIRK) {
> + spin_lock_irqsave(&host->irq_lock, flags);
> + OMAP_HSMMC_WRITE(host->base, ISE, 0);
> + OMAP_HSMMC_WRITE(host->base, IE, 0);
> + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
> + spin_unlock_irqrestore(&host->irq_lock, flags);
> +
> + ret = pinctrl_select_state(host->pinctrl, host->idle);
> + if (ret < 0)
> + dev_warn(mmc_dev(host->mmc), "Unable to select idle pinmux\n");
> +
> + enable_irq(mmc_slot(host).sdio_irq);
> + }
> +
> + spin_lock_irqsave(&host->irq_lock, flags);
> + /* infinite loop, if irq not cleared in omap_hsmmc_enable_sdio_irq */
> + host->flags |= HSMMC_RUNTIME_SUSPENDED;
Can you provide more details about the infinite loop and how it will get recovered.
> + spin_unlock_irqrestore(&host->irq_lock, flags);
> +
> + return ret;
> }
>
> static int omap_hsmmc_runtime_resume(struct device *dev)
> {
> struct omap_hsmmc_host *host;
> + unsigned long flags;
> + int ret = 0;
>
> host = platform_get_drvdata(to_platform_device(dev));
> omap_hsmmc_context_restore(host);
> dev_dbg(dev, "enabled\n");
>
> - return 0;
> + spin_lock_irqsave(&host->irq_lock, flags);
> + /* infinite loop, if irq not cleared in omap_hsmmc_enable_sdio_irq */
> + host->flags &= ~HSMMC_RUNTIME_SUSPENDED;
> + spin_unlock_irqrestore(&host->irq_lock, flags);
> +
> + if (host->flags & HSMMC_SWAKEUP_QUIRK) {
> + disable_irq(mmc_slot(host).sdio_irq);
> +
> + ret = pinctrl_select_state(host->pinctrl, host->active);
> + if (ret < 0)
> + dev_warn(mmc_dev(host->mmc), "Unable to select active pinmux\n");
> +
> + spin_lock_irqsave(&host->irq_lock, flags);
> + if (host->flags & HSMMC_SDIO_IRQ_ENABLED) {
> + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
> + OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN);
> + OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN);
> + }
> + spin_unlock_irqrestore(&host->irq_lock, flags);
> + }
> + return ret;
> }
>
> static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
> diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
> index 2bf1b30..fd5fff5 100644
> --- a/include/linux/platform_data/mmc-omap.h
> +++ b/include/linux/platform_data/mmc-omap.h
> @@ -115,6 +115,7 @@ struct omap_mmc_platform_data {
>
> int switch_pin; /* gpio (card detect) */
> int gpio_wp; /* gpio (write protect) */
> + int gpio_cirq; /* gpio (card irq) */
>
> int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
> int (*set_power)(struct device *dev, int slot,
> @@ -145,6 +146,9 @@ struct omap_mmc_platform_data {
> int card_detect_irq;
> int (*card_detect)(struct device *dev, int slot);
>
> + /* SDIO IRQs */
> + int sdio_irq;
> +
> unsigned int ban_openended:1;
>
> } slots[OMAP_MMC_MAX_SLOTS];
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists