[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1381921178-28511-1-git-send-email-rric@kernel.org>
Date: Wed, 16 Oct 2013 12:59:33 +0200
From: Robert Richter <rric@...nel.org>
To: linux-edac@...r.kernel.org
Cc: Rob Herring <rob.herring@...xeda.com>,
linux-kernel@...r.kernel.org,
Robert Richter <robert.richter@...aro.org>,
Robert Richter <rric@...nel.org>
Subject: [PATCH 0/5] edac, highbank: Add Calxeda ECX-2000 support
This patch series enables ECC edac support for Calxeda ECX-2000
(Midway). The ECX-2000 memory controller is similar to Highbank but
has different register bases for error and interrupt registers.
Testing the driver uncovered a bug in the interrupt initialization.
So there is also a fix for this for all the Highbank edac drivers. The
interrupt was enabled too early which caused a crash if there are
interrupts pending (ECC errors) during driver initialization.
Also some improvements and unification of edac log messages I found
useful.
-Robert
Rob Herring (1):
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
Robert Richter (4):
edac, highbank: Fix interrupt setup of mem and l2 controller
edac, highbank: Add Calxeda ECX-2000 support
edac, highbank: Improve and unify naming
edac: Unify reporting of device info for device, mc and pci
.../devicetree/bindings/arm/calxeda/mem-ctrlr.txt | 4 +-
arch/arm/boot/dts/ecx-2000.dts | 6 +
arch/arm/boot/dts/ecx-common.dtsi | 6 -
arch/arm/boot/dts/highbank.dts | 6 +
drivers/edac/edac_device.c | 9 +-
drivers/edac/edac_mc.c | 6 +-
drivers/edac/edac_pci.c | 8 +-
drivers/edac/highbank_l2_edac.c | 33 +++---
drivers/edac/highbank_mc_edac.c | 128 +++++++++++++--------
9 files changed, 127 insertions(+), 79 deletions(-)
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists