| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Oct 2013 12:59:36 +0200
From: Robert Richter <rric@...nel.org>
To: linux-edac@...r.kernel.org
Cc: Rob Herring <rob.herring@...xeda.com>,
linux-kernel@...r.kernel.org,
Robert Richter <robert.richter@...aro.org>,
Robert Richter <rric@...nel.org>
Subject: [PATCH 3/5] edac, highbank: Add Calxeda ECX-2000 support
From: Robert Richter <robert.richter@...aro.org>
Implement edac support for Calxeda ECX-2000.
The ECX-2000 memory controller is similar to Highbank but has
different register bases for error and interrupt registers. There is
an own device tree name "calxeda,ecx-2000-ddr-ctrl" for identification
and initialization of the ECX-2000 and its base addresses.
Signed-off-by: Robert Richter <robert.richter@...aro.org>
Signed-off-by: Robert Richter <rric@...nel.org>
---
drivers/edac/highbank_mc_edac.c | 105 ++++++++++++++++++++++++++--------------
1 file changed, 70 insertions(+), 35 deletions(-)
diff --git a/drivers/edac/highbank_mc_edac.c b/drivers/edac/highbank_mc_edac.c
index 7a78307..79cb872 100644
--- a/drivers/edac/highbank_mc_edac.c
+++ b/drivers/edac/highbank_mc_edac.c
@@ -26,31 +26,40 @@
#include "edac_module.h"
/* DDR Ctrlr Error Registers */
-#define HB_DDR_ECC_OPT 0x128
-#define HB_DDR_ECC_U_ERR_ADDR 0x130
-#define HB_DDR_ECC_U_ERR_STAT 0x134
-#define HB_DDR_ECC_U_ERR_DATAL 0x138
-#define HB_DDR_ECC_U_ERR_DATAH 0x13c
-#define HB_DDR_ECC_C_ERR_ADDR 0x140
-#define HB_DDR_ECC_C_ERR_STAT 0x144
-#define HB_DDR_ECC_C_ERR_DATAL 0x148
-#define HB_DDR_ECC_C_ERR_DATAH 0x14c
-#define HB_DDR_ECC_INT_STATUS 0x180
-#define HB_DDR_ECC_INT_ACK 0x184
-#define HB_DDR_ECC_U_ERR_ID 0x424
-#define HB_DDR_ECC_C_ERR_ID 0x428
-#define HB_DDR_ECC_INT_STAT_CE 0x8
-#define HB_DDR_ECC_INT_STAT_DOUBLE_CE 0x10
-#define HB_DDR_ECC_INT_STAT_UE 0x20
-#define HB_DDR_ECC_INT_STAT_DOUBLE_UE 0x40
+#define HB_DDR_ECC_ERR_BASE 0x128
+#define MW_DDR_ECC_ERR_BASE 0x1b4
+
+#define HB_DDR_ECC_OPT 0x00
+#define HB_DDR_ECC_U_ERR_ADDR 0x08
+#define HB_DDR_ECC_U_ERR_STAT 0x0c
+#define HB_DDR_ECC_U_ERR_DATAL 0x10
+#define HB_DDR_ECC_U_ERR_DATAH 0x14
+#define HB_DDR_ECC_C_ERR_ADDR 0x18
+#define HB_DDR_ECC_C_ERR_STAT 0x1c
+#define HB_DDR_ECC_C_ERR_DATAL 0x20
+#define HB_DDR_ECC_C_ERR_DATAH 0x24
#define HB_DDR_ECC_OPT_MODE_MASK 0x3
#define HB_DDR_ECC_OPT_FWC 0x100
#define HB_DDR_ECC_OPT_XOR_SHIFT 16
+/* DDR Ctrlr Interrupt Registers */
+
+#define HB_DDR_ECC_INT_BASE 0x180
+#define MW_DDR_ECC_INT_BASE 0x218
+
+#define HB_DDR_ECC_INT_STATUS 0x00
+#define HB_DDR_ECC_INT_ACK 0x04
+
+#define HB_DDR_ECC_INT_STAT_CE 0x8
+#define HB_DDR_ECC_INT_STAT_DOUBLE_CE 0x10
+#define HB_DDR_ECC_INT_STAT_UE 0x20
+#define HB_DDR_ECC_INT_STAT_DOUBLE_UE 0x40
+
struct hb_mc_drvdata {
- void __iomem *mc_vbase;
+ void __iomem *mc_err_base;
+ void __iomem *mc_int_base;
};
static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
@@ -60,10 +69,10 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
u32 status, err_addr;
/* Read the interrupt status register */
- status = readl(drvdata->mc_vbase + HB_DDR_ECC_INT_STATUS);
+ status = readl(drvdata->mc_int_base + HB_DDR_ECC_INT_STATUS);
if (status & HB_DDR_ECC_INT_STAT_UE) {
- err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_U_ERR_ADDR);
+ err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_U_ERR_ADDR);
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
err_addr >> PAGE_SHIFT,
err_addr & ~PAGE_MASK, 0,
@@ -71,9 +80,9 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
mci->ctl_name, "");
}
if (status & HB_DDR_ECC_INT_STAT_CE) {
- u32 syndrome = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_STAT);
+ u32 syndrome = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_STAT);
syndrome = (syndrome >> 8) & 0xff;
- err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_ADDR);
+ err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_ADDR);
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
err_addr >> PAGE_SHIFT,
err_addr & ~PAGE_MASK, syndrome,
@@ -82,7 +91,7 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
}
/* clear the error, clears the interrupt */
- writel(status, drvdata->mc_vbase + HB_DDR_ECC_INT_ACK);
+ writel(status, drvdata->mc_int_base + HB_DDR_ECC_INT_ACK);
return IRQ_HANDLED;
}
@@ -104,10 +113,10 @@ static ssize_t highbank_mc_err_inject_write(struct file *file,
buf[buf_size] = 0;
if (!kstrtou8(buf, 16, &synd)) {
- reg = readl(pdata->mc_vbase + HB_DDR_ECC_OPT);
+ reg = readl(pdata->mc_err_base + HB_DDR_ECC_OPT);
reg &= HB_DDR_ECC_OPT_MODE_MASK;
reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC;
- writel(reg, pdata->mc_vbase + HB_DDR_ECC_OPT);
+ writel(reg, pdata->mc_err_base + HB_DDR_ECC_OPT);
}
return count;
@@ -131,17 +140,46 @@ static void highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
{}
#endif
+struct hb_mc_settings {
+ int err_offset;
+ int int_offset;
+};
+
+static struct hb_mc_settings hb_settings = {
+ .err_offset = HB_DDR_ECC_ERR_BASE,
+ .int_offset = HB_DDR_ECC_INT_BASE,
+};
+
+static struct hb_mc_settings mw_settings = {
+ .err_offset = MW_DDR_ECC_ERR_BASE,
+ .int_offset = MW_DDR_ECC_INT_BASE,
+};
+
+static struct of_device_id hb_ddr_ctrl_of_match[] = {
+ { .compatible = "calxeda,hb-ddr-ctrl", .data = &hb_settings },
+ { .compatible = "calxeda,ecx-2000-ddr-ctrl", .data = &mw_settings },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
+
static int highbank_mc_probe(struct platform_device *pdev)
{
+ const struct of_device_id *id;
+ const struct hb_mc_settings *settings;
struct edac_mc_layer layers[2];
struct mem_ctl_info *mci;
struct hb_mc_drvdata *drvdata;
struct dimm_info *dimm;
struct resource *r;
+ void __iomem *base;
u32 control;
int irq;
int res = 0;
+ id = of_match_device(hb_ddr_ctrl_of_match, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
layers[0].size = 1;
layers[0].is_virt_csrow = true;
@@ -174,15 +212,18 @@ static int highbank_mc_probe(struct platform_device *pdev)
goto err;
}
- drvdata->mc_vbase = devm_ioremap(&pdev->dev,
- r->start, resource_size(r));
- if (!drvdata->mc_vbase) {
+ base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (!base) {
dev_err(&pdev->dev, "Unable to map regs\n");
res = -ENOMEM;
goto err;
}
- control = readl(drvdata->mc_vbase + HB_DDR_ECC_OPT) & 0x3;
+ settings = id->data;
+ drvdata->mc_err_base = base + settings->err_offset;
+ drvdata->mc_int_base = base + settings->int_offset;
+
+ control = readl(drvdata->mc_err_base + HB_DDR_ECC_OPT) & 0x3;
if (!control || (control == 0x2)) {
dev_err(&pdev->dev, "No ECC present, or ECC disabled\n");
res = -ENODEV;
@@ -238,12 +279,6 @@ static int highbank_mc_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id hb_ddr_ctrl_of_match[] = {
- { .compatible = "calxeda,hb-ddr-ctrl", },
- {},
-};
-MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
-
static struct platform_driver highbank_mc_edac_driver = {
.probe = highbank_mc_probe,
.remove = highbank_mc_remove,
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists