| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <525DF2FD.3070007@freescale.com>
Date: Wed, 16 Oct 2013 09:59:25 +0800
From: Hongbo Zhang <hongbo.zhang@...escale.com>
To: Mark Rutland <mark.rutland@....com>
CC: "rob.herring@...xeda.com" <rob.herring@...xeda.com>,
Pawel Moll <Pawel.Moll@....com>,
"swarren@...dotorg.org" <swarren@...dotorg.org>,
"ian.campbell@...rix.com" <ian.campbell@...rix.com>,
"vinod.koul@...el.com" <vinod.koul@...el.com>,
"djbw@...com" <djbw@...com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v11 2/3] DMA: Freescale: Add new 8-channel DMA engine
device tree nodes
On 10/15/2013 09:38 PM, Mark Rutland wrote:
> On Tue, Oct 08, 2013 at 04:22:07AM +0100, Hongbo Zhang wrote:
>> Hi Mark, Stephen and other DT maintainers?
>>
>> The 1/3 had already been acked by Mark, and please have a further look
>> at this patch 2/3.
>> The DMA maintainer Vinod needs ack for the DT related patches so that
>> he can take all this patch set.
> Sorry for the delay.
>
> This looks ok to me.
>
> Acked-by: Mark Rutland <mark.rutland@....com>
Thanks, Mark.
>> On 09/26/2013 05:33 PM, hongbo.zhang@...escale.com wrote:
>>> From: Hongbo Zhang <hongbo.zhang@...escale.com>
>>>
>>> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds
>>> the device tree nodes for them.
>>>
>>> Signed-off-by: Hongbo Zhang <hongbo.zhang@...escale.com>
>>> ---
>>> .../devicetree/bindings/powerpc/fsl/dma.txt | 70 +++++++++++++++++
>>> arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 4 +-
>>> arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 82 ++++++++++++++++++++
>>> arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 82 ++++++++++++++++++++
>>> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
>>> 5 files changed, 238 insertions(+), 4 deletions(-)
>>> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
>>> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
>>>
>>> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
>>> index 0584168..7fc1b01 100644
>>> --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
>>> +++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
>>> @@ -128,6 +128,76 @@ Example:
>>> };
>>> };
>>>
>>> +** Freescale Elo3 DMA Controller
>>> + DMA controller which has same function as EloPlus except that Elo3 has 8
>>> + channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
>>> + series chips, such as t1040, t4240, b4860.
>>> +
>>> +Required properties:
>>> +
>>> +- compatible : must include "fsl,elo3-dma"
>>> +- reg : contains two entries for DMA General Status Registers,
>>> + i.e. DGSR0 which includes status for channel 1~4, and
>>> + DGSR1 for channel 5~8
>>> +- ranges : describes the mapping between the address space of the
>>> + DMA channels and the address space of the DMA controller
>>> +
>>> +- DMA channel nodes:
>>> + - compatible : must include "fsl,eloplus-dma-channel"
>>> + - reg : DMA channel specific registers
>>> + - interrupts : interrupt specifier for DMA channel IRQ
>>> + - interrupt-parent : optional, if needed for interrupt mapping
>>> +
>>> +Example:
>>> +dma@...300 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "fsl,elo3-dma";
>>> + reg = <0x100300 0x4>,
>>> + <0x100600 0x4>;
>>> + ranges = <0x0 0x100100 0x500>;
>>> + dma-channel@0 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <28 2 0 0>;
>>> + };
>>> + dma-channel@80 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x80 0x80>;
>>> + interrupts = <29 2 0 0>;
>>> + };
>>> + dma-channel@100 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x100 0x80>;
>>> + interrupts = <30 2 0 0>;
>>> + };
>>> + dma-channel@180 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x180 0x80>;
>>> + interrupts = <31 2 0 0>;
>>> + };
>>> + dma-channel@300 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x300 0x80>;
>>> + interrupts = <76 2 0 0>;
>>> + };
>>> + dma-channel@380 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x380 0x80>;
>>> + interrupts = <77 2 0 0>;
>>> + };
>>> + dma-channel@400 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x400 0x80>;
>>> + interrupts = <78 2 0 0>;
>>> + };
>>> + dma-channel@480 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x480 0x80>;
>>> + interrupts = <79 2 0 0>;
>>> + };
>>> +};
>>> +
>>> Note on DMA channel compatible properties: The compatible property must say
>>> "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
>>> driver (fsldma). Any DMA channel used by fsldma cannot be used by another
>>> diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
>>> index 7399154..ea53ea1 100644
>>> --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
>>> +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
>>> @@ -223,13 +223,13 @@
>>> reg = <0xe2000 0x1000>;
>>> };
>>>
>>> -/include/ "qoriq-dma-0.dtsi"
>>> +/include/ "elo3-dma-0.dtsi"
>>> dma@...300 {
>>> fsl,iommu-parent = <&pamu0>;
>>> fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
>>> };
>>>
>>> -/include/ "qoriq-dma-1.dtsi"
>>> +/include/ "elo3-dma-1.dtsi"
>>> dma@...300 {
>>> fsl,iommu-parent = <&pamu0>;
>>> fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
>>> diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
>>> new file mode 100644
>>> index 0000000..3c210e0
>>> --- /dev/null
>>> +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
>>> @@ -0,0 +1,82 @@
>>> +/*
>>> + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ]
>>> + *
>>> + * Copyright 2013 Freescale Semiconductor Inc.
>>> + *
>>> + * Redistribution and use in source and binary forms, with or without
>>> + * modification, are permitted provided that the following conditions are met:
>>> + * * Redistributions of source code must retain the above copyright
>>> + * notice, this list of conditions and the following disclaimer.
>>> + * * Redistributions in binary form must reproduce the above copyright
>>> + * notice, this list of conditions and the following disclaimer in the
>>> + * documentation and/or other materials provided with the distribution.
>>> + * * Neither the name of Freescale Semiconductor nor the
>>> + * names of its contributors may be used to endorse or promote products
>>> + * derived from this software without specific prior written permission.
>>> + *
>>> + *
>>> + * ALTERNATIVELY, this software may be distributed under the terms of the
>>> + * GNU General Public License ("GPL") as published by the Free Software
>>> + * Foundation, either version 2 of that License or (at your option) any
>>> + * later version.
>>> + *
>>> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
>>> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
>>> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
>>> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
>>> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
>>> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
>>> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
>>> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
>>> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>>> + */
>>> +
>>> +dma0: dma@...300 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "fsl,elo3-dma";
>>> + reg = <0x100300 0x4>,
>>> + <0x100600 0x4>;
>>> + ranges = <0x0 0x100100 0x500>;
>>> + dma-channel@0 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <28 2 0 0>;
>>> + };
>>> + dma-channel@80 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x80 0x80>;
>>> + interrupts = <29 2 0 0>;
>>> + };
>>> + dma-channel@100 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x100 0x80>;
>>> + interrupts = <30 2 0 0>;
>>> + };
>>> + dma-channel@180 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x180 0x80>;
>>> + interrupts = <31 2 0 0>;
>>> + };
>>> + dma-channel@300 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x300 0x80>;
>>> + interrupts = <76 2 0 0>;
>>> + };
>>> + dma-channel@380 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x380 0x80>;
>>> + interrupts = <77 2 0 0>;
>>> + };
>>> + dma-channel@400 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x400 0x80>;
>>> + interrupts = <78 2 0 0>;
>>> + };
>>> + dma-channel@480 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x480 0x80>;
>>> + interrupts = <79 2 0 0>;
>>> + };
>>> +};
>>> diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
>>> new file mode 100644
>>> index 0000000..cccf3bb
>>> --- /dev/null
>>> +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
>>> @@ -0,0 +1,82 @@
>>> +/*
>>> + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ]
>>> + *
>>> + * Copyright 2013 Freescale Semiconductor Inc.
>>> + *
>>> + * Redistribution and use in source and binary forms, with or without
>>> + * modification, are permitted provided that the following conditions are met:
>>> + * * Redistributions of source code must retain the above copyright
>>> + * notice, this list of conditions and the following disclaimer.
>>> + * * Redistributions in binary form must reproduce the above copyright
>>> + * notice, this list of conditions and the following disclaimer in the
>>> + * documentation and/or other materials provided with the distribution.
>>> + * * Neither the name of Freescale Semiconductor nor the
>>> + * names of its contributors may be used to endorse or promote products
>>> + * derived from this software without specific prior written permission.
>>> + *
>>> + *
>>> + * ALTERNATIVELY, this software may be distributed under the terms of the
>>> + * GNU General Public License ("GPL") as published by the Free Software
>>> + * Foundation, either version 2 of that License or (at your option) any
>>> + * later version.
>>> + *
>>> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
>>> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
>>> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
>>> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
>>> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
>>> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
>>> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
>>> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
>>> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>>> + */
>>> +
>>> +dma1: dma@...300 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "fsl,elo3-dma";
>>> + reg = <0x101300 0x4>,
>>> + <0x101600 0x4>;
>>> + ranges = <0x0 0x101100 0x500>;
>>> + dma-channel@0 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <32 2 0 0>;
>>> + };
>>> + dma-channel@80 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x80 0x80>;
>>> + interrupts = <33 2 0 0>;
>>> + };
>>> + dma-channel@100 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x100 0x80>;
>>> + interrupts = <34 2 0 0>;
>>> + };
>>> + dma-channel@180 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x180 0x80>;
>>> + interrupts = <35 2 0 0>;
>>> + };
>>> + dma-channel@300 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x300 0x80>;
>>> + interrupts = <80 2 0 0>;
>>> + };
>>> + dma-channel@380 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x380 0x80>;
>>> + interrupts = <81 2 0 0>;
>>> + };
>>> + dma-channel@400 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x400 0x80>;
>>> + interrupts = <82 2 0 0>;
>>> + };
>>> + dma-channel@480 {
>>> + compatible = "fsl,eloplus-dma-channel";
>>> + reg = <0x480 0x80>;
>>> + interrupts = <83 2 0 0>;
>>> + };
>>> +};
>>> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
>>> index bd611a9..ec95c60 100644
>>> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
>>> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
>>> @@ -387,8 +387,8 @@
>>> reg = <0xea000 0x4000>;
>>> };
>>>
>>> -/include/ "qoriq-dma-0.dtsi"
>>> -/include/ "qoriq-dma-1.dtsi"
>>> +/include/ "elo3-dma-0.dtsi"
>>> +/include/ "elo3-dma-1.dtsi"
>>>
>>> /include/ "qoriq-espi-0.dtsi"
>>> spi@...000 {
>>
>>
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists