Message-Id: <1382046957-15987-5-git-send-email-david.a.cohen@linux.intel.com>
Date:	Thu, 17 Oct 2013 14:55:47 -0700
From:	David Cohen <david.a.cohen@...ux.intel.com>
To:	x86@...nel.org, hpa@...or.com, mingo@...hat.com, tglx@...utronix.de
Cc:	linux-kernel@...r.kernel.org,
	Kuppuswamy Sathyanarayanan 
	<sathyanarayanan.kuppuswamy@...ux.intel.com>,
	David Cohen <david.a.cohen@...ux.intel.com>
Subject: [PATCH v9 04/14] intel_mid: Renamed *mrst* to *intel_mid*

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>

Following files contains code that is common to all intel mid
soc's. So renamed them as below.

mrst/mrst.c              -> intel-mid/intel-mid.c
mrst/vrtc.c              -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c               -> pci/intel_mid_pci.c

Also, renamed the corresponding header files and made changes
to the driver files that included these header files.

To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@...ux.intel.com>
---
 arch/x86/include/asm/intel-mid.h                   |   81 ++
 arch/x86/include/asm/intel_mid_vrtc.h              |    9 +
 arch/x86/include/asm/mrst-vrtc.h                   |    9 -
 arch/x86/include/asm/mrst.h                        |   81 --
 arch/x86/kernel/apb_timer.c                        |    2 +-
 arch/x86/kernel/early_printk.c                     |    2 +-
 arch/x86/kernel/rtc.c                              |    2 +-
 arch/x86/pci/Makefile                              |    2 +-
 arch/x86/pci/intel_mid_pci.c                       |  310 ++++++
 arch/x86/pci/mrst.c                                |  310 ------
 arch/x86/platform/Makefile                         |    2 +-
 arch/x86/platform/intel-mid/Makefile               |    3 +
 .../platform/intel-mid/early_printk_intel_mid.c    |  325 ++++++
 arch/x86/platform/intel-mid/intel-mid.c            | 1055 ++++++++++++++++++++
 arch/x86/platform/intel-mid/intel_mid_vrtc.c       |  177 ++++
 arch/x86/platform/mrst/Makefile                    |    3 -
 arch/x86/platform/mrst/early_printk_mrst.c         |  325 ------
 arch/x86/platform/mrst/mrst.c                      | 1054 -------------------
 arch/x86/platform/mrst/vrtc.c                      |  177 ----
 drivers/gpu/drm/gma500/mdfld_dsi_output.h          |    2 +-
 drivers/gpu/drm/gma500/oaktrail_device.c           |    2 +-
 drivers/gpu/drm/gma500/oaktrail_lvds.c             |    2 +-
 drivers/platform/x86/intel_scu_ipc.c               |    2 +-
 drivers/rtc/rtc-mrst.c                             |    4 +-
 drivers/watchdog/intel_scu_watchdog.c              |    2 +-
 25 files changed, 1972 insertions(+), 1971 deletions(-)
 create mode 100644 arch/x86/include/asm/intel-mid.h
 create mode 100644 arch/x86/include/asm/intel_mid_vrtc.h
 delete mode 100644 arch/x86/include/asm/mrst-vrtc.h
 delete mode 100644 arch/x86/include/asm/mrst.h
 create mode 100644 arch/x86/pci/intel_mid_pci.c
 delete mode 100644 arch/x86/pci/mrst.c
 create mode 100644 arch/x86/platform/intel-mid/Makefile
 create mode 100644 arch/x86/platform/intel-mid/early_printk_intel_mid.c
 create mode 100644 arch/x86/platform/intel-mid/intel-mid.c
 create mode 100644 arch/x86/platform/intel-mid/intel_mid_vrtc.c
 delete mode 100644 arch/x86/platform/mrst/Makefile
 delete mode 100644 arch/x86/platform/mrst/early_printk_mrst.c
 delete mode 100644 arch/x86/platform/mrst/mrst.c
 delete mode 100644 arch/x86/platform/mrst/vrtc.c

diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
new file mode 100644
index 0000000..cc79a4f
--- /dev/null
+++ b/arch/x86/include/asm/intel-mid.h
@@ -0,0 +1,81 @@
+/*
+ * intel-mid.h: Intel MID specific setup code
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _ASM_X86_INTEL_MID_H
+#define _ASM_X86_INTEL_MID_H
+
+#include <linux/sfi.h>
+
+extern int pci_mrst_init(void);
+extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int sfi_mrtc_num;
+extern struct sfi_rtc_table_entry sfi_mrtc_array[];
+
+/*
+ * Medfield is the follow-up of Moorestown, it combines two chip solution into
+ * one. Other than that it also added always-on and constant tsc and lapic
+ * timers. Medfield is the platform name, and the chip name is called Penwell
+ * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
+ * identified via MSRs.
+ */
+enum mrst_cpu_type {
+	/* 1 was Moorestown */
+	MRST_CPU_CHIP_PENWELL = 2,
+};
+
+extern enum mrst_cpu_type __mrst_cpu_chip;
+
+#ifdef CONFIG_X86_INTEL_MID
+
+static inline enum mrst_cpu_type mrst_identify_cpu(void)
+{
+	return __mrst_cpu_chip;
+}
+
+#else /* !CONFIG_X86_INTEL_MID */
+
+#define mrst_identify_cpu()    (0)
+
+#endif /* !CONFIG_X86_INTEL_MID */
+
+enum mrst_timer_options {
+	MRST_TIMER_DEFAULT,
+	MRST_TIMER_APBT_ONLY,
+	MRST_TIMER_LAPIC_APBT,
+};
+
+extern enum mrst_timer_options mrst_timer_options;
+
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU         83200
+#define PENWELL_FSB_FREQ_100SKU        99840
+
+#define SFI_MTMR_MAX_NUM 8
+#define SFI_MRTC_MAX	8
+
+extern struct console early_mrst_console;
+extern void mrst_early_console_init(void);
+
+extern struct console early_hsu_console;
+extern void hsu_early_console_init(const char *);
+
+extern void intel_scu_devices_create(void);
+extern void intel_scu_devices_destroy(void);
+
+/* VRTC timer */
+#define MRST_VRTC_MAP_SZ	(1024)
+/*#define MRST_VRTC_PGOFFSET	(0xc00) */
+
+extern void mrst_rtc_init(void);
+
+#endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/intel_mid_vrtc.h b/arch/x86/include/asm/intel_mid_vrtc.h
new file mode 100644
index 0000000..86ff468
--- /dev/null
+++ b/arch/x86/include/asm/intel_mid_vrtc.h
@@ -0,0 +1,9 @@
+#ifndef _INTEL_MID_VRTC_H
+#define _INTEL_MID_VRTC_H
+
+extern unsigned char vrtc_cmos_read(unsigned char reg);
+extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
+extern void vrtc_get_time(struct timespec *now);
+extern int vrtc_set_mmss(const struct timespec *now);
+
+#endif
diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/mrst-vrtc.h
deleted file mode 100644
index 1e69a75..0000000
--- a/arch/x86/include/asm/mrst-vrtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _MRST_VRTC_H
-#define _MRST_VRTC_H
-
-extern unsigned char vrtc_cmos_read(unsigned char reg);
-extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
-extern void vrtc_get_time(struct timespec *now);
-extern int vrtc_set_mmss(const struct timespec *now);
-
-#endif
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
deleted file mode 100644
index fc18bf3..0000000
--- a/arch/x86/include/asm/mrst.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * mrst.h: Intel Moorestown platform specific setup code
- *
- * (C) Copyright 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-#ifndef _ASM_X86_MRST_H
-#define _ASM_X86_MRST_H
-
-#include <linux/sfi.h>
-
-extern int pci_mrst_init(void);
-extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
-extern int sfi_mrtc_num;
-extern struct sfi_rtc_table_entry sfi_mrtc_array[];
-
-/*
- * Medfield is the follow-up of Moorestown, it combines two chip solution into
- * one. Other than that it also added always-on and constant tsc and lapic
- * timers. Medfield is the platform name, and the chip name is called Penwell
- * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
- * identified via MSRs.
- */
-enum mrst_cpu_type {
-	/* 1 was Moorestown */
-	MRST_CPU_CHIP_PENWELL = 2,
-};
-
-extern enum mrst_cpu_type __mrst_cpu_chip;
-
-#ifdef CONFIG_X86_INTEL_MID
-
-static inline enum mrst_cpu_type mrst_identify_cpu(void)
-{
-	return __mrst_cpu_chip;
-}
-
-#else /* !CONFIG_X86_INTEL_MID */
-
-#define mrst_identify_cpu()    (0)
-
-#endif /* !CONFIG_X86_INTEL_MID */
-
-enum mrst_timer_options {
-	MRST_TIMER_DEFAULT,
-	MRST_TIMER_APBT_ONLY,
-	MRST_TIMER_LAPIC_APBT,
-};
-
-extern enum mrst_timer_options mrst_timer_options;
-
-/*
- * Penwell uses spread spectrum clock, so the freq number is not exactly
- * the same as reported by MSR based on SDM.
- */
-#define PENWELL_FSB_FREQ_83SKU         83200
-#define PENWELL_FSB_FREQ_100SKU        99840
-
-#define SFI_MTMR_MAX_NUM 8
-#define SFI_MRTC_MAX	8
-
-extern struct console early_mrst_console;
-extern void mrst_early_console_init(void);
-
-extern struct console early_hsu_console;
-extern void hsu_early_console_init(const char *);
-
-extern void intel_scu_devices_create(void);
-extern void intel_scu_devices_destroy(void);
-
-/* VRTC timer */
-#define MRST_VRTC_MAP_SZ	(1024)
-/*#define MRST_VRTC_PGOFFSET	(0xc00) */
-
-extern void mrst_rtc_init(void);
-
-#endif /* _ASM_X86_MRST_H */
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index c9876ef..9154836 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -40,7 +40,7 @@
 
 #include <asm/fixmap.h>
 #include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/time.h>
 
 #define APBT_CLOCKEVENT_RATING		110
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index d15f575..38ca398 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -14,7 +14,7 @@
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
 #include <asm/fixmap.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/pgtable.h>
 #include <linux/usb/ehci_def.h>
 
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 0aa2939..a1b52fe 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -12,7 +12,7 @@
 #include <asm/vsyscall.h>
 #include <asm/x86_init.h>
 #include <asm/time.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/rtc.h>
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index ee0af58..e063eed 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_NUMACHIP)	+= numachip.o
 
-obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
+obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_pci.o
 
 obj-y				+= common.o early.o
 obj-y				+= bus_numa.o
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
new file mode 100644
index 0000000..f8715f7
--- /dev/null
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -0,0 +1,310 @@
+/*
+ * Intel MID PCI support
+ *   Copyright (c) 2008 Intel Corporation
+ *     Jesse Barnes <jesse.barnes@...el.com>
+ *
+ * Moorestown has an interesting PCI implementation:
+ *   - configuration space is memory mapped (as defined by MCFG)
+ *   - Lincroft devices also have a real, type 1 configuration space
+ *   - Early Lincroft silicon has a type 1 access bug that will cause
+ *     a hang if non-existent devices are accessed
+ *   - some devices have the "fixed BAR" capability, which means
+ *     they can't be relocated or modified; check for that during
+ *     BAR sizing
+ *
+ * So, we use the MCFG space for all reads and writes, but also send
+ * Lincroft writes to type 1 space.  But only read/write if the device
+ * actually exists, otherwise return all 1s for reads and bit bucket
+ * the writes.
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+
+#include <asm/segment.h>
+#include <asm/pci_x86.h>
+#include <asm/hw_irq.h>
+#include <asm/io_apic.h>
+
+#define PCIE_CAP_OFFSET	0x100
+
+/* Fixed BAR fields */
+#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00	/* Fixed BAR (TBD) */
+#define PCI_FIXED_BAR_0_SIZE	0x04
+#define PCI_FIXED_BAR_1_SIZE	0x08
+#define PCI_FIXED_BAR_2_SIZE	0x0c
+#define PCI_FIXED_BAR_3_SIZE	0x10
+#define PCI_FIXED_BAR_4_SIZE	0x14
+#define PCI_FIXED_BAR_5_SIZE	0x1c
+
+static int pci_soc_mode;
+
+/**
+ * fixed_bar_cap - return the offset of the fixed BAR cap if found
+ * @bus: PCI bus
+ * @devfn: device in question
+ *
+ * Look for the fixed BAR cap on @bus and @devfn, returning its offset
+ * if found or 0 otherwise.
+ */
+static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
+{
+	int pos;
+	u32 pcie_cap = 0, cap_data;
+
+	pos = PCIE_CAP_OFFSET;
+
+	if (!raw_pci_ext_ops)
+		return 0;
+
+	while (pos) {
+		if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					  devfn, pos, 4, &pcie_cap))
+			return 0;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+			break;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
+			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					      devfn, pos + 4, 4, &cap_data);
+			if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
+				return pos;
+		}
+
+		pos = PCI_EXT_CAP_NEXT(pcie_cap);
+	}
+
+	return 0;
+}
+
+static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
+				   int reg, int len, u32 val, int offset)
+{
+	u32 size;
+	unsigned int domain, busnum;
+	int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
+
+	domain = pci_domain_nr(bus);
+	busnum = bus->number;
+
+	if (val == ~0 && len == 4) {
+		unsigned long decode;
+
+		raw_pci_ext_ops->read(domain, busnum, devfn,
+			       offset + 8 + (bar * 4), 4, &size);
+
+		/* Turn the size into a decode pattern for the sizing code */
+		if (size) {
+			decode = size - 1;
+			decode |= decode >> 1;
+			decode |= decode >> 2;
+			decode |= decode >> 4;
+			decode |= decode >> 8;
+			decode |= decode >> 16;
+			decode++;
+			decode = ~(decode - 1);
+		} else {
+			decode = 0;
+		}
+
+		/*
+		 * If val is all ones, the core code is trying to size the reg,
+		 * so update the mmconfig space with the real size.
+		 *
+		 * Note: this assumes the fixed size we got is a power of two.
+		 */
+		return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
+				       decode);
+	}
+
+	/* This is some other kind of BAR write, so just do it. */
+	return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
+}
+
+/**
+ * type1_access_ok - check whether to use type 1
+ * @bus: bus number
+ * @devfn: device & function in question
+ *
+ * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
+ * all, the we can go ahead with any reads & writes.  If it's on a Lincroft,
+ * but doesn't exist, avoid the access altogether to keep the chip from
+ * hanging.
+ */
+static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
+{
+	/*
+	 * This is a workaround for A0 LNC bug where PCI status register does
+	 * not have new CAP bit set. can not be written by SW either.
+	 *
+	 * PCI header type in real LNC indicates a single function device, this
+	 * will prevent probing other devices under the same function in PCI
+	 * shim. Therefore, use the header type in shim instead.
+	 */
+	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
+		return 0;
+	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
+				|| devfn == PCI_DEVFN(0, 0)
+				|| devfn == PCI_DEVFN(3, 0)))
+		return 1;
+	return 0; /* Langwell on others */
+}
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 *value)
+{
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
+					devfn, where, size, value);
+	return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+			      devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 value)
+{
+	int offset;
+
+	/*
+	 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+	 * to ROM BAR return 0 then being ignored.
+	 */
+	if (where == PCI_ROM_ADDRESS)
+		return 0;
+
+	/*
+	 * Devices with fixed BARs need special handling:
+	 *   - BAR sizing code will save, write ~0, read size, restore
+	 *   - so writes to fixed BARs need special handling
+	 *   - other writes to fixed BAR devices should go through mmconfig
+	 */
+	offset = fixed_bar_cap(bus, devfn);
+	if (offset &&
+	    (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
+		return pci_device_update_fixed(bus, devfn, where, size, value,
+					       offset);
+	}
+
+	/*
+	 * On Moorestown update both real & mmconfig space
+	 * Note: early Lincroft silicon can't handle type 1 accesses to
+	 *       non-existent devices, so just eat the write in that case.
+	 */
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
+					      devfn, where, size, value);
+	return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
+			       where, size, value);
+}
+
+static int mrst_pci_irq_enable(struct pci_dev *dev)
+{
+	u8 pin;
+	struct io_apic_irq_attr irq_attr;
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+
+	/*
+	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+	 * IOAPIC RTE entries, so we just enable RTE for the device.
+	 */
+	irq_attr.ioapic = mp_find_ioapic(dev->irq);
+	irq_attr.ioapic_pin = dev->irq;
+	irq_attr.trigger = 1; /* level */
+	irq_attr.polarity = 1; /* active low */
+	io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
+
+	return 0;
+}
+
+struct pci_ops pci_mrst_ops = {
+	.read = pci_read,
+	.write = pci_write,
+};
+
+/**
+ * pci_mrst_init - installs pci_mrst_ops
+ *
+ * Moorestown has an interesting PCI implementation (see above).
+ * Called when the early platform detection installs it.
+ */
+int __init pci_mrst_init(void)
+{
+	pr_info("Intel MID platform detected, using MID PCI ops\n");
+	pci_mmcfg_late_init();
+	pcibios_enable_irq = mrst_pci_irq_enable;
+	pci_root_ops = pci_mrst_ops;
+	pci_soc_mode = 1;
+	/* Continue with standard init */
+	return 1;
+}
+
+/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
+ */
+static void pci_d3delay_fixup(struct pci_dev *dev)
+{
+	/*
+	 * PCI fixups are effectively decided compile time. If we have a dual
+	 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+	 */
+	if (!pci_soc_mode)
+		return;
+	/*
+	 * True PCI devices in Lincroft should allow type 1 access, the rest
+	 * are Langwell fake PCI devices.
+	 */
+	if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
+		return;
+	dev->d3_delay = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
+
+static void mrst_power_off_unused_dev(struct pci_dev *dev)
+{
+	pci_set_power_state(dev, PCI_D3hot);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
+
+/*
+ * Langwell devices reside at fixed offsets, don't try to move them.
+ */
+static void pci_fixed_bar_fixup(struct pci_dev *dev)
+{
+	unsigned long offset;
+	u32 size;
+	int i;
+
+	if (!pci_soc_mode)
+		return;
+
+	/* Must have extended configuration space */
+	if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
+		return;
+
+	/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
+	offset = fixed_bar_cap(dev->bus, dev->devfn);
+	if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
+	    PCI_DEVFN(2, 2) == dev->devfn)
+		return;
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+		pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
+		dev->resource[i].end = dev->resource[i].start + size - 1;
+		dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
deleted file mode 100644
index 903fded..0000000
--- a/arch/x86/pci/mrst.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Moorestown PCI support
- *   Copyright (c) 2008 Intel Corporation
- *     Jesse Barnes <jesse.barnes@...el.com>
- *
- * Moorestown has an interesting PCI implementation:
- *   - configuration space is memory mapped (as defined by MCFG)
- *   - Lincroft devices also have a real, type 1 configuration space
- *   - Early Lincroft silicon has a type 1 access bug that will cause
- *     a hang if non-existent devices are accessed
- *   - some devices have the "fixed BAR" capability, which means
- *     they can't be relocated or modified; check for that during
- *     BAR sizing
- *
- * So, we use the MCFG space for all reads and writes, but also send
- * Lincroft writes to type 1 space.  But only read/write if the device
- * actually exists, otherwise return all 1s for reads and bit bucket
- * the writes.
- */
-
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/smp.h>
-
-#include <asm/segment.h>
-#include <asm/pci_x86.h>
-#include <asm/hw_irq.h>
-#include <asm/io_apic.h>
-
-#define PCIE_CAP_OFFSET	0x100
-
-/* Fixed BAR fields */
-#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00	/* Fixed BAR (TBD) */
-#define PCI_FIXED_BAR_0_SIZE	0x04
-#define PCI_FIXED_BAR_1_SIZE	0x08
-#define PCI_FIXED_BAR_2_SIZE	0x0c
-#define PCI_FIXED_BAR_3_SIZE	0x10
-#define PCI_FIXED_BAR_4_SIZE	0x14
-#define PCI_FIXED_BAR_5_SIZE	0x1c
-
-static int pci_soc_mode;
-
-/**
- * fixed_bar_cap - return the offset of the fixed BAR cap if found
- * @bus: PCI bus
- * @devfn: device in question
- *
- * Look for the fixed BAR cap on @bus and @devfn, returning its offset
- * if found or 0 otherwise.
- */
-static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
-{
-	int pos;
-	u32 pcie_cap = 0, cap_data;
-
-	pos = PCIE_CAP_OFFSET;
-
-	if (!raw_pci_ext_ops)
-		return 0;
-
-	while (pos) {
-		if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
-					  devfn, pos, 4, &pcie_cap))
-			return 0;
-
-		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
-			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
-			break;
-
-		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
-			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
-					      devfn, pos + 4, 4, &cap_data);
-			if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
-				return pos;
-		}
-
-		pos = PCI_EXT_CAP_NEXT(pcie_cap);
-	}
-
-	return 0;
-}
-
-static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
-				   int reg, int len, u32 val, int offset)
-{
-	u32 size;
-	unsigned int domain, busnum;
-	int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
-
-	domain = pci_domain_nr(bus);
-	busnum = bus->number;
-
-	if (val == ~0 && len == 4) {
-		unsigned long decode;
-
-		raw_pci_ext_ops->read(domain, busnum, devfn,
-			       offset + 8 + (bar * 4), 4, &size);
-
-		/* Turn the size into a decode pattern for the sizing code */
-		if (size) {
-			decode = size - 1;
-			decode |= decode >> 1;
-			decode |= decode >> 2;
-			decode |= decode >> 4;
-			decode |= decode >> 8;
-			decode |= decode >> 16;
-			decode++;
-			decode = ~(decode - 1);
-		} else {
-			decode = 0;
-		}
-
-		/*
-		 * If val is all ones, the core code is trying to size the reg,
-		 * so update the mmconfig space with the real size.
-		 *
-		 * Note: this assumes the fixed size we got is a power of two.
-		 */
-		return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
-				       decode);
-	}
-
-	/* This is some other kind of BAR write, so just do it. */
-	return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
-}
-
-/**
- * type1_access_ok - check whether to use type 1
- * @bus: bus number
- * @devfn: device & function in question
- *
- * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
- * all, the we can go ahead with any reads & writes.  If it's on a Lincroft,
- * but doesn't exist, avoid the access altogether to keep the chip from
- * hanging.
- */
-static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
-{
-	/*
-	 * This is a workaround for A0 LNC bug where PCI status register does
-	 * not have new CAP bit set. can not be written by SW either.
-	 *
-	 * PCI header type in real LNC indicates a single function device, this
-	 * will prevent probing other devices under the same function in PCI
-	 * shim. Therefore, use the header type in shim instead.
-	 */
-	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
-		return 0;
-	if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
-				|| devfn == PCI_DEVFN(0, 0)
-				|| devfn == PCI_DEVFN(3, 0)))
-		return 1;
-	return 0; /* Langwell on others */
-}
-
-static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-		    int size, u32 *value)
-{
-	if (type1_access_ok(bus->number, devfn, where))
-		return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
-					devfn, where, size, value);
-	return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
-			      devfn, where, size, value);
-}
-
-static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-		     int size, u32 value)
-{
-	int offset;
-
-	/*
-	 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
-	 * to ROM BAR return 0 then being ignored.
-	 */
-	if (where == PCI_ROM_ADDRESS)
-		return 0;
-
-	/*
-	 * Devices with fixed BARs need special handling:
-	 *   - BAR sizing code will save, write ~0, read size, restore
-	 *   - so writes to fixed BARs need special handling
-	 *   - other writes to fixed BAR devices should go through mmconfig
-	 */
-	offset = fixed_bar_cap(bus, devfn);
-	if (offset &&
-	    (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
-		return pci_device_update_fixed(bus, devfn, where, size, value,
-					       offset);
-	}
-
-	/*
-	 * On Moorestown update both real & mmconfig space
-	 * Note: early Lincroft silicon can't handle type 1 accesses to
-	 *       non-existent devices, so just eat the write in that case.
-	 */
-	if (type1_access_ok(bus->number, devfn, where))
-		return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
-					      devfn, where, size, value);
-	return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
-			       where, size, value);
-}
-
-static int mrst_pci_irq_enable(struct pci_dev *dev)
-{
-	u8 pin;
-	struct io_apic_irq_attr irq_attr;
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-
-	/*
-	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
-	 * IOAPIC RTE entries, so we just enable RTE for the device.
-	 */
-	irq_attr.ioapic = mp_find_ioapic(dev->irq);
-	irq_attr.ioapic_pin = dev->irq;
-	irq_attr.trigger = 1; /* level */
-	irq_attr.polarity = 1; /* active low */
-	io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
-
-	return 0;
-}
-
-struct pci_ops pci_mrst_ops = {
-	.read = pci_read,
-	.write = pci_write,
-};
-
-/**
- * pci_mrst_init - installs pci_mrst_ops
- *
- * Moorestown has an interesting PCI implementation (see above).
- * Called when the early platform detection installs it.
- */
-int __init pci_mrst_init(void)
-{
-	pr_info("Intel MID platform detected, using MID PCI ops\n");
-	pci_mmcfg_late_init();
-	pcibios_enable_irq = mrst_pci_irq_enable;
-	pci_root_ops = pci_mrst_ops;
-	pci_soc_mode = 1;
-	/* Continue with standard init */
-	return 1;
-}
-
-/*
- * Langwell devices are not true PCI devices; they are not subject to 10 ms
- * d3 to d0 delay required by PCI spec.
- */
-static void pci_d3delay_fixup(struct pci_dev *dev)
-{
-	/*
-	 * PCI fixups are effectively decided compile time. If we have a dual
-	 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
-	 */
-	if (!pci_soc_mode)
-		return;
-	/*
-	 * True PCI devices in Lincroft should allow type 1 access, the rest
-	 * are Langwell fake PCI devices.
-	 */
-	if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
-		return;
-	dev->d3_delay = 0;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
-
-static void mrst_power_off_unused_dev(struct pci_dev *dev)
-{
-	pci_set_power_state(dev, PCI_D3hot);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
-
-/*
- * Langwell devices reside at fixed offsets, don't try to move them.
- */
-static void pci_fixed_bar_fixup(struct pci_dev *dev)
-{
-	unsigned long offset;
-	u32 size;
-	int i;
-
-	if (!pci_soc_mode)
-		return;
-
-	/* Must have extended configuration space */
-	if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
-		return;
-
-	/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
-	offset = fixed_bar_cap(dev->bus, dev->devfn);
-	if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
-	    PCI_DEVFN(2, 2) == dev->devfn)
-		return;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
-		dev->resource[i].end = dev->resource[i].start + size - 1;
-		dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 01e0231..20342d4 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -4,7 +4,7 @@ obj-y	+= efi/
 obj-y	+= geode/
 obj-y	+= goldfish/
 obj-y	+= iris/
-obj-y	+= mrst/
+obj-y	+= intel-mid/
 obj-y	+= olpc/
 obj-y	+= scx200/
 obj-y	+= sfi/
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
new file mode 100644
index 0000000..de29635
--- /dev/null
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
+obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_intel_mid.o
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
new file mode 100644
index 0000000..7c56e70
--- /dev/null
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -0,0 +1,325 @@
+/*
+ * early_printk_intel_mid.c - early consoles for Intel MID platforms
+ *
+ * Copyright (c) 2008-2010, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/*
+ * This file implements two early consoles named mrst and hsu.
+ * mrst is based on Maxim3110 spi-uart device, it exists in both
+ * Moorestown and Medfield platforms, while hsu is based on a High
+ * Speed UART device which only exists in the Medfield platform
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/serial_mfd.h>
+#include <linux/kmsg_dump.h>
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/intel-mid.h>
+
+#define MRST_SPI_TIMEOUT		0x200000
+#define MRST_REGBASE_SPI0		0xff128000
+#define MRST_REGBASE_SPI1		0xff128400
+#define MRST_CLK_SPI0_REG		0xff11d86c
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET			0
+
+#define SPI_FRF_OFFSET			4
+#define SPI_FRF_SPI			0x0
+#define SPI_FRF_SSP			0x1
+#define SPI_FRF_MICROWIRE		0x2
+#define SPI_FRF_RESV			0x3
+
+#define SPI_MODE_OFFSET			6
+#define SPI_SCPH_OFFSET			6
+#define SPI_SCOL_OFFSET			7
+#define SPI_TMOD_OFFSET			8
+#define	SPI_TMOD_TR			0x0		/* xmit & recv */
+#define SPI_TMOD_TO			0x1		/* xmit only */
+#define SPI_TMOD_RO			0x2		/* recv only */
+#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET		10
+#define SPI_SRL_OFFSET			11
+#define SPI_CFS_OFFSET			12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK				0x7f		/* cover 7 bits */
+#define SR_BUSY				(1 << 0)
+#define SR_TF_NOT_FULL			(1 << 1)
+#define SR_TF_EMPT			(1 << 2)
+#define SR_RF_NOT_EMPT			(1 << 3)
+#define SR_RF_FULL			(1 << 4)
+#define SR_TX_ERR			(1 << 5)
+#define SR_DCOL				(1 << 6)
+
+struct dw_spi_reg {
+	u32	ctrl0;
+	u32	ctrl1;
+	u32	ssienr;
+	u32	mwcr;
+	u32	ser;
+	u32	baudr;
+	u32	txfltr;
+	u32	rxfltr;
+	u32	txflr;
+	u32	rxflr;
+	u32	sr;
+	u32	imr;
+	u32	isr;
+	u32	risr;
+	u32	txoicr;
+	u32	rxoicr;
+	u32	rxuicr;
+	u32	msticr;
+	u32	icr;
+	u32	dmacr;
+	u32	dmatdlr;
+	u32	dmardlr;
+	u32	idr;
+	u32	version;
+
+	/* Currently operates as 32 bits, though only the low 16 bits matter */
+	u32	dr;
+} __packed;
+
+#define dw_readl(dw, name)		__raw_readl(&(dw)->name)
+#define dw_writel(dw, name, val)	__raw_writel((val), &(dw)->name)
+
+/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
+static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
+
+static u32 *pclk_spi0;
+/* Always contains an accessible address, start with 0 */
+static struct dw_spi_reg *pspi;
+
+static struct kmsg_dumper dw_dumper;
+static int dumper_registered;
+
+static void dw_kmsg_dump(struct kmsg_dumper *dumper,
+			 enum kmsg_dump_reason reason)
+{
+	static char line[1024];
+	size_t len;
+
+	/* When run to this, we'd better re-init the HW */
+	mrst_early_console_init();
+
+	while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+		early_mrst_console.write(&early_mrst_console, line, len);
+}
+
+/* Set the ratio rate to 115200, 8n1, IRQ disabled */
+static void max3110_write_config(void)
+{
+	u16 config;
+
+	config = 0xc001;
+	dw_writel(pspi, dr, config);
+}
+
+/* Translate char to a eligible word and send to max3110 */
+static void max3110_write_data(char c)
+{
+	u16 data;
+
+	data = 0x8000 | c;
+	dw_writel(pspi, dr, data);
+}
+
+void mrst_early_console_init(void)
+{
+	u32 ctrlr0 = 0;
+	u32 spi0_cdiv;
+	u32 freq; /* Freqency info only need be searched once */
+
+	/* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
+	pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+							MRST_CLK_SPI0_REG);
+	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
+	freq = 100000000 / (spi0_cdiv + 1);
+
+	if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+		mrst_spi_paddr = MRST_REGBASE_SPI1;
+
+	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+						mrst_spi_paddr);
+
+	/* Disable SPI controller */
+	dw_writel(pspi, ssienr, 0);
+
+	/* Set control param, 8 bits, transmit only mode */
+	ctrlr0 = dw_readl(pspi, ctrl0);
+
+	ctrlr0 &= 0xfcc0;
+	ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
+		      | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
+	dw_writel(pspi, ctrl0, ctrlr0);
+
+	/*
+	 * Change the spi0 clk to comply with 115200 bps, use 100000 to
+	 * calculate the clk dividor to make the clock a little slower
+	 * than real baud rate.
+	 */
+	dw_writel(pspi, baudr, freq/100000);
+
+	/* Disable all INT for early phase */
+	dw_writel(pspi, imr, 0x0);
+
+	/* Set the cs to spi-uart */
+	dw_writel(pspi, ser, 0x2);
+
+	/* Enable the HW, the last step for HW init */
+	dw_writel(pspi, ssienr, 0x1);
+
+	/* Set the default configuration */
+	max3110_write_config();
+
+	/* Register the kmsg dumper */
+	if (!dumper_registered) {
+		dw_dumper.dump = dw_kmsg_dump;
+		kmsg_dump_register(&dw_dumper);
+		dumper_registered = 1;
+	}
+}
+
+/* Slave select should be called in the read/write function */
+static void early_mrst_spi_putc(char c)
+{
+	unsigned int timeout;
+	u32 sr;
+
+	timeout = MRST_SPI_TIMEOUT;
+	/* Early putc needs to make sure the TX FIFO is not full */
+	while (--timeout) {
+		sr = dw_readl(pspi, sr);
+		if (!(sr & SR_TF_NOT_FULL))
+			cpu_relax();
+		else
+			break;
+	}
+
+	if (!timeout)
+		pr_warn("MRST earlycon: timed out\n");
+	else
+		max3110_write_data(c);
+}
+
+/* Early SPI only uses polling mode */
+static void early_mrst_spi_write(struct console *con, const char *str,
+					unsigned n)
+{
+	int i;
+
+	for (i = 0; i < n && *str; i++) {
+		if (*str == '\n')
+			early_mrst_spi_putc('\r');
+		early_mrst_spi_putc(*str);
+		str++;
+	}
+}
+
+struct console early_mrst_console = {
+	.name =		"earlymrst",
+	.write =	early_mrst_spi_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+/*
+ * Following is the early console based on Medfield HSU (High
+ * Speed UART) device.
+ */
+#define HSU_PORT_BASE		0xffa28080
+
+static void __iomem *phsu;
+
+void hsu_early_console_init(const char *s)
+{
+	unsigned long paddr, port = 0;
+	u8 lcr;
+
+	/*
+	 * Select the early HSU console port if specified by user in the
+	 * kernel command line.
+	 */
+	if (*s && !kstrtoul(s, 10, &port))
+		port = clamp_val(port, 0, 2);
+
+	paddr = HSU_PORT_BASE + port * 0x80;
+	phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
+
+	/* Disable FIFO */
+	writeb(0x0, phsu + UART_FCR);
+
+	/* Set to default 115200 bps, 8n1 */
+	lcr = readb(phsu + UART_LCR);
+	writeb((0x80 | lcr), phsu + UART_LCR);
+	writeb(0x18, phsu + UART_DLL);
+	writeb(lcr,  phsu + UART_LCR);
+	writel(0x3600, phsu + UART_MUL*4);
+
+	writeb(0x8, phsu + UART_MCR);
+	writeb(0x7, phsu + UART_FCR);
+	writeb(0x3, phsu + UART_LCR);
+
+	/* Clear IRQ status */
+	readb(phsu + UART_LSR);
+	readb(phsu + UART_RX);
+	readb(phsu + UART_IIR);
+	readb(phsu + UART_MSR);
+
+	/* Enable FIFO */
+	writeb(0x7, phsu + UART_FCR);
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void early_hsu_putc(char ch)
+{
+	unsigned int timeout = 10000; /* 10ms */
+	u8 status;
+
+	while (--timeout) {
+		status = readb(phsu + UART_LSR);
+		if (status & BOTH_EMPTY)
+			break;
+		udelay(1);
+	}
+
+	/* Only write the char when there was no timeout */
+	if (timeout)
+		writeb(ch, phsu + UART_TX);
+}
+
+static void early_hsu_write(struct console *con, const char *str, unsigned n)
+{
+	int i;
+
+	for (i = 0; i < n && *str; i++) {
+		if (*str == '\n')
+			early_hsu_putc('\r');
+		early_hsu_putc(*str);
+		str++;
+	}
+}
+
+struct console early_hsu_console = {
+	.name =		"earlyhsu",
+	.write =	early_hsu_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
new file mode 100644
index 0000000..0f39c4b
--- /dev/null
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -0,0 +1,1055 @@
+/*
+ * intel-mid.c: Intel MID platform setup code
+ *
+ * (C) Copyright 2008, 2012 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@...el.com)
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@...el.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#define pr_fmt(fmt) "mrst: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/gpio.h>
+#include <linux/i2c/tc35876x.h>
+
+#include <asm/setup.h>
+#include <asm/mpspec_def.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/apb_timer.h>
+#include <asm/reboot.h>
+
+/*
+ * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
+ * cmdline option x86_mrst_timer can be used to override the configuration
+ * to prefer one or the other.
+ * at runtime, there are basically three timer configurations:
+ * 1. per cpu apbt clock only
+ * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
+ * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
+ *
+ * by default (without cmdline option), platform code first detects cpu type
+ * to see if we are on lincroft or penwell, then set up both lapic or apbt
+ * clocks accordingly.
+ * i.e. by default, medfield uses configuration #2, moorestown uses #1.
+ * config #3 is supported but not recommended on medfield.
+ *
+ * rating and feature summary:
+ * lapic (with C3STOP) --------- 100
+ * apbt (always-on) ------------ 110
+ * lapic (always-on,ARAT) ------ 150
+ */
+
+enum mrst_timer_options mrst_timer_options;
+
+static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
+static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+enum mrst_cpu_type __mrst_cpu_chip;
+EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
+
+int sfi_mtimer_num;
+
+struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
+EXPORT_SYMBOL_GPL(sfi_mrtc_array);
+int sfi_mrtc_num;
+
+static void mrst_power_off(void)
+{
+}
+
+static void mrst_reboot(void)
+{
+	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+}
+
+/* parse all the mtimer info to a static mtimer array */
+static int __init sfi_parse_mtmr(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_timer_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mtimer_num) {
+		sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
+					struct sfi_timer_table_entry);
+		pentry = (struct sfi_timer_table_entry *) sb->pentry;
+		totallen = sfi_mtimer_num * sizeof(*pentry);
+		memcpy(sfi_mtimer_array, pentry, totallen);
+	}
+
+	pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
+	pentry = sfi_mtimer_array;
+	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
+		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
+			" irq = %d\n", totallen, (u32)pentry->phys_addr,
+			pentry->freq_hz, pentry->irq);
+			if (!pentry->irq)
+				continue;
+			mp_irq.type = MP_INTSRC;
+			mp_irq.irqtype = mp_INT;
+/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+			mp_irq.irqflag = 5;
+			mp_irq.srcbus = MP_BUS_ISA;
+			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+			mp_irq.dstapic = MP_APIC_ALL;
+			mp_irq.dstirq = pentry->irq;
+			mp_save_irq(&mp_irq);
+	}
+
+	return 0;
+}
+
+struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
+{
+	int i;
+	if (hint < sfi_mtimer_num) {
+		if (!sfi_mtimer_usage[hint]) {
+			pr_debug("hint taken for timer %d irq %d\n",
+				hint, sfi_mtimer_array[hint].irq);
+			sfi_mtimer_usage[hint] = 1;
+			return &sfi_mtimer_array[hint];
+		}
+	}
+	/* take the first timer available */
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (!sfi_mtimer_usage[i]) {
+			sfi_mtimer_usage[i] = 1;
+			return &sfi_mtimer_array[i];
+		}
+		i++;
+	}
+	return NULL;
+}
+
+void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
+{
+	int i;
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (mtmr->irq == sfi_mtimer_array[i].irq) {
+			sfi_mtimer_usage[i] = 0;
+			return;
+		}
+		i++;
+	}
+}
+
+/* parse all the mrtc info to a global mrtc array */
+int __init sfi_parse_mrtc(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_rtc_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mrtc_num) {
+		sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
+						struct sfi_rtc_table_entry);
+		pentry = (struct sfi_rtc_table_entry *)sb->pentry;
+		totallen = sfi_mrtc_num * sizeof(*pentry);
+		memcpy(sfi_mrtc_array, pentry, totallen);
+	}
+
+	pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
+	pentry = sfi_mrtc_array;
+	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
+		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
+			totallen, (u32)pentry->phys_addr, pentry->irq);
+		mp_irq.type = MP_INTSRC;
+		mp_irq.irqtype = mp_INT;
+		mp_irq.irqflag = 0xf;	/* level trigger and active low */
+		mp_irq.srcbus = MP_BUS_ISA;
+		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+		mp_irq.dstapic = MP_APIC_ALL;
+		mp_irq.dstirq = pentry->irq;
+		mp_save_irq(&mp_irq);
+	}
+	return 0;
+}
+
+static unsigned long __init mrst_calibrate_tsc(void)
+{
+	unsigned long fast_calibrate;
+	u32 lo, hi, ratio, fsb;
+
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+	ratio = (hi >> 8) & 0x1f;
+	pr_debug("ratio is %d\n", ratio);
+	if (!ratio) {
+		pr_err("read a zero ratio, should be incorrect!\n");
+		pr_err("force tsc ratio to 16 ...\n");
+		ratio = 16;
+	}
+	rdmsr(MSR_FSB_FREQ, lo, hi);
+	if ((lo & 0x7) == 0x7)
+		fsb = PENWELL_FSB_FREQ_83SKU;
+	else
+		fsb = PENWELL_FSB_FREQ_100SKU;
+	fast_calibrate = ratio * fsb;
+	pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+	lapic_timer_frequency = fsb * 1000 / HZ;
+	/* mark tsc clocksource as reliable */
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+
+	if (fast_calibrate)
+		return fast_calibrate;
+
+	return 0;
+}
+
+static void __init mrst_time_init(void)
+{
+	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
+	switch (mrst_timer_options) {
+	case MRST_TIMER_APBT_ONLY:
+		break;
+	case MRST_TIMER_LAPIC_APBT:
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		break;
+	default:
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			break;
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		return;
+	}
+	/* we need at least one APB timer */
+	pre_init_apic_IRQ0();
+	apbt_time_init();
+}
+
+static void mrst_arch_setup(void)
+{
+	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+	else {
+		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
+			boot_cpu_data.x86, boot_cpu_data.x86_model);
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+	}
+}
+
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+	return 0;
+}
+
+/*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+	return 0;
+}
+
+/*
+ * Moorestown specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_mrst_early_setup(void)
+{
+	x86_init.resources.probe_roms = x86_init_noop;
+	x86_init.resources.reserve_resources = x86_init_noop;
+
+	x86_init.timers.timer_init = mrst_time_init;
+	x86_init.timers.setup_percpu_clockev = x86_init_noop;
+
+	x86_init.irqs.pre_vector_init = x86_init_noop;
+
+	x86_init.oem.arch_setup = mrst_arch_setup;
+
+	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
+
+	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+	x86_platform.i8042_detect = mrst_i8042_detect;
+	x86_init.timers.wallclock_init = mrst_rtc_init;
+	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
+	x86_init.pci.init = pci_mrst_init;
+	x86_init.pci.fixup_irqs = x86_init_noop;
+
+	legacy_pic = &null_legacy_pic;
+
+	/* Moorestown specific power_off/restart method */
+	pm_power_off = mrst_power_off;
+	machine_ops.emergency_restart  = mrst_reboot;
+
+	/* Avoid searching for BIOS MP tables */
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+	set_bit(MP_BUS_ISA, mp_bus_not_pci);
+}
+
+/*
+ * if user does not want to use per CPU apb timer, just give it a lower rating
+ * than local apic timer and skip the late per cpu timer init.
+ */
+static inline int __init setup_x86_mrst_timer(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp("apbt_only", arg) == 0)
+		mrst_timer_options = MRST_TIMER_APBT_ONLY;
+	else if (strcmp("lapic_and_apbt", arg) == 0)
+		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+	else {
+		pr_warn("X86 MRST timer option %s not recognised"
+			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+			   arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static struct sfi_gpio_table_entry *gpio_table;
+static int gpio_num_entry;
+
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_gpio_table_entry *pentry;
+	int num, i;
+
+	if (gpio_table)
+		return 0;
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+	gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+	if (!gpio_table)
+		return -1;
+	memcpy(gpio_table, pentry, num * sizeof(*pentry));
+	gpio_num_entry = num;
+
+	pr_debug("GPIO pin info:\n");
+	for (i = 0; i < num; i++, pentry++)
+		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+		" pin = %d\n", i,
+			pentry->controller_name,
+			pentry->pin_name,
+			pentry->pin_no);
+	return 0;
+}
+
+static int get_gpio_by_name(const char *name)
+{
+	struct sfi_gpio_table_entry *pentry = gpio_table;
+	int i;
+
+	if (!pentry)
+		return -1;
+	for (i = 0; i < gpio_num_entry; i++, pentry++) {
+		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+			return pentry->pin_no;
+	}
+	return -1;
+}
+
+/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+	char name[SFI_NAME_LEN + 1];
+	u8 type;
+	u8 delay;
+	void *(*get_platform_data)(void *info);
+};
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MRST_IRQ_OFFSET 0x100
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+	int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+	if (gpio_base == -1)
+		gpio_base = 64;
+	pmic_gpio_pdata.gpio_base = gpio_base;
+	pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+	return &pmic_gpio_pdata;
+}
+
+static void __init *max3111_platform_data(void *info)
+{
+	struct spi_board_info *spi_info = info;
+	int intr = get_gpio_by_name("max3111_int");
+
+	spi_info->mode = SPI_MODE_0;
+	if (intr == -1)
+		return NULL;
+	spi_info->irq = intr + MRST_IRQ_OFFSET;
+	return NULL;
+}
+
+/* we have multiple max7315 on the board ... */
+#define MAX7315_NUM 2
+static void __init *max7315_platform_data(void *info)
+{
+	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+	static int nr;
+	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	if (nr == MAX7315_NUM) {
+		pr_err("too many max7315s, we only support %d\n",
+				MAX7315_NUM);
+		return NULL;
+	}
+	/* we have several max7315 on the board, we only need load several
+	 * instances of the same pca953x driver to cover them
+	 */
+	strcpy(i2c_info->type, "max7315");
+	if (nr++) {
+		sprintf(base_pin_name, "max7315_%d_base", nr);
+		sprintf(intr_pin_name, "max7315_%d_int", nr);
+	} else {
+		strcpy(base_pin_name, "max7315_base");
+		strcpy(intr_pin_name, "max7315_int");
+	}
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	max7315->gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + MRST_IRQ_OFFSET;
+		max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		max7315->irq_base = -1;
+	}
+	return max7315;
+}
+
+static void *tca6416_platform_data(void *info)
+{
+	static struct pca953x_platform_data tca6416;
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	strcpy(i2c_info->type, "tca6416");
+	strcpy(base_pin_name, "tca6416_base");
+	strcpy(intr_pin_name, "tca6416_int");
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	tca6416.gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + MRST_IRQ_OFFSET;
+		tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		tca6416.irq_base = -1;
+	}
+	return &tca6416;
+}
+
+static void *mpu3050_platform_data(void *info)
+{
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("mpu3050_int");
+
+	if (intr == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	return NULL;
+}
+
+static void __init *emc1403_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("thermal_int");
+	int intr2nd = get_gpio_by_name("thermal_alert");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static void __init *lis331dl_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("accel_int");
+	int intr2nd = get_gpio_by_name("accel_2");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static void __init *no_platform_data(void *info)
+{
+	return NULL;
+}
+
+static struct resource msic_resources[] = {
+	{
+		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
+		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct intel_msic_platform_data msic_pdata;
+
+static struct platform_device msic_device = {
+	.name		= "intel_msic",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &msic_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(msic_resources),
+	.resource	= msic_resources,
+};
+
+static inline bool mrst_has_msic(void)
+{
+	return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+}
+
+static int msic_scu_status_change(struct notifier_block *nb,
+				  unsigned long code, void *data)
+{
+	if (code == SCU_DOWN) {
+		platform_device_unregister(&msic_device);
+		return 0;
+	}
+
+	return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+	static struct notifier_block msic_scu_notifier = {
+		.notifier_call	= msic_scu_status_change,
+	};
+
+	/*
+	 * We need to be sure that the SCU IPC is ready before MSIC device
+	 * can be registered.
+	 */
+	if (mrst_has_msic())
+		intel_scu_notifier_add(&msic_scu_notifier);
+
+	return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+	struct sfi_device_table_entry *entry = info;
+
+	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+	msic_pdata.irq[block] = entry->irq;
+
+	return no_platform_data(info);
+}
+
+static void *msic_battery_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static void *msic_gpio_platform_data(void *info)
+{
+	static struct intel_msic_gpio_pdata pdata;
+	int gpio = get_gpio_by_name("msic_gpio_base");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio_base = gpio;
+	msic_pdata.gpio = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static void *msic_audio_platform_data(void *info)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		pr_err("failed to create audio platform device\n");
+		return NULL;
+	}
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static void *msic_power_btn_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static void *msic_ocd_platform_data(void *info)
+{
+	static struct intel_msic_ocd_pdata pdata;
+	int gpio = get_gpio_by_name("ocd_gpio");
+
+	if (gpio < 0)
+		return NULL;
+
+	pdata.gpio = gpio;
+	msic_pdata.ocd = &pdata;
+
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
+static void *msic_thermal_platform_data(void *info)
+{
+	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
+}
+
+/* tc35876x DSI-LVDS bridge chip and panel platform data */
+static void *tc35876x_platform_data(void *data)
+{
+	static struct tc35876x_platform_data pdata;
+
+	/* gpio pins set to -1 will not be used by the driver */
+	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
+	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
+	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+
+	return &pdata;
+}
+
+static const struct devs_id __initconst device_ids[] = {
+	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
+	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
+	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
+	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
+	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
+	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
+	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
+	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
+
+	/* MSIC subdevices */
+	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
+	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
+	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
+	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
+	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
+
+	{},
+};
+
+#define MAX_IPCDEVS	24
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static int ipc_next_dev;
+
+#define MAX_SCU_SPI	24
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static int spi_next_dev;
+
+#define MAX_SCU_I2C	24
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static int i2c_bus[MAX_SCU_I2C];
+static int i2c_next_dev;
+
+static void __init intel_scu_device_register(struct platform_device *pdev)
+{
+	if (ipc_next_dev == MAX_IPCDEVS)
+		pr_err("too many SCU IPC devices");
+	else
+		ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+	struct spi_board_info *new_dev;
+
+	if (spi_next_dev == MAX_SCU_SPI) {
+		pr_err("too many SCU SPI devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed spi dev %s\n",
+			sdev->modalias);
+		return;
+	}
+	memcpy(new_dev, sdev, sizeof(*sdev));
+
+	spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+						struct i2c_board_info *idev)
+{
+	struct i2c_board_info *new_dev;
+
+	if (i2c_next_dev == MAX_SCU_I2C) {
+		pr_err("too many SCU I2C devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed i2c dev %s\n",
+			idev->type);
+		return;
+	}
+	memcpy(new_dev, idev, sizeof(*idev));
+
+	i2c_bus[i2c_next_dev] = bus;
+	i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+	int i;
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_add(ipc_devs[i]);
+
+	for (i = 0; i < spi_next_dev; i++)
+		spi_register_board_info(spi_devs[i], 1);
+
+	for (i = 0; i < i2c_next_dev; i++) {
+		struct i2c_adapter *adapter;
+		struct i2c_client *client;
+
+		adapter = i2c_get_adapter(i2c_bus[i]);
+		if (adapter) {
+			client = i2c_new_device(adapter, i2c_devs[i]);
+			if (!client)
+				pr_err("can't create i2c device %s\n",
+					i2c_devs[i]->type);
+		} else
+			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+	}
+	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+	int i;
+
+	intel_scu_notifier_post(SCU_DOWN, NULL);
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+	/* Single threaded */
+	static struct resource __initdata res = {
+		.name = "IRQ",
+		.flags = IORESOURCE_IRQ,
+	};
+	res.start = irq;
+	platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
+{
+	const struct devs_id *dev = device_ids;
+	struct platform_device *pdev;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_IPC &&
+			!strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(entry);
+			break;
+		}
+		dev++;
+	}
+
+	/*
+	 * On Medfield the platform device creation is handled by the MSIC
+	 * MFD driver so we don't need to do it here.
+	 */
+	if (mrst_has_msic())
+		return;
+
+	pdev = platform_device_alloc(entry->name, 0);
+	if (pdev == NULL) {
+		pr_err("out of memory for SFI platform device '%s'.\n",
+			entry->name);
+		return;
+	}
+	install_irq_resource(pdev, entry->irq);
+
+	pdev->dev.platform_data = pdata;
+	intel_scu_device_register(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+{
+	const struct devs_id *dev = device_ids;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_SPI &&
+			!strncmp(dev->name, spi_info->modalias,
+						SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(spi_info);
+			break;
+		}
+		dev++;
+	}
+	spi_info->platform_data = pdata;
+	if (dev->delay)
+		intel_scu_spi_device_register(spi_info);
+	else
+		spi_register_board_info(spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+{
+	const struct devs_id *dev = device_ids;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_I2C &&
+			!strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(i2c_info);
+			break;
+		}
+		dev++;
+	}
+	i2c_info->platform_data = pdata;
+
+	if (dev->delay)
+		intel_scu_i2c_device_register(bus, i2c_info);
+	else
+		i2c_register_board_info(bus, i2c_info, 1);
+}
+
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_device_table_entry *pentry;
+	struct spi_board_info spi_info;
+	struct i2c_board_info i2c_info;
+	int num, i, bus;
+	int ioapic;
+	struct io_apic_irq_attr irq_attr;
+
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+	pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+	for (i = 0; i < num; i++, pentry++) {
+		int irq = pentry->irq;
+
+		if (irq != (u8)0xff) { /* native RTE case */
+			/* these SPI2 devices are not exposed to system as PCI
+			 * devices, but they have separate RTE entry in IOAPIC
+			 * so we have to enable them one by one here
+			 */
+			ioapic = mp_find_ioapic(irq);
+			irq_attr.ioapic = ioapic;
+			irq_attr.ioapic_pin = irq;
+			irq_attr.trigger = 1;
+			irq_attr.polarity = 1;
+			io_apic_set_pci_routing(NULL, irq, &irq_attr);
+		} else
+			irq = 0; /* No irq */
+
+		switch (pentry->type) {
+		case SFI_DEV_TYPE_IPC:
+			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
+				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
+			sfi_handle_ipc_dev(pentry);
+			break;
+		case SFI_DEV_TYPE_SPI:
+			memset(&spi_info, 0, sizeof(spi_info));
+			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+			spi_info.irq = irq;
+			spi_info.bus_num = pentry->host_num;
+			spi_info.chip_select = pentry->addr;
+			spi_info.max_speed_hz = pentry->max_freq;
+			pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
+				"irq = 0x%2x, max_freq = %d, cs = %d\n", i,
+				spi_info.bus_num,
+				spi_info.modalias,
+				spi_info.irq,
+				spi_info.max_speed_hz,
+				spi_info.chip_select);
+			sfi_handle_spi_dev(&spi_info);
+			break;
+		case SFI_DEV_TYPE_I2C:
+			memset(&i2c_info, 0, sizeof(i2c_info));
+			bus = pentry->host_num;
+			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+			i2c_info.irq = irq;
+			i2c_info.addr = pentry->addr;
+			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
+				"irq = 0x%2x, addr = 0x%x\n", i, bus,
+				i2c_info.type,
+				i2c_info.irq,
+				i2c_info.addr);
+			sfi_handle_i2c_dev(bus, &i2c_info);
+			break;
+		case SFI_DEV_TYPE_UART:
+		case SFI_DEV_TYPE_HSI:
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+static int __init mrst_platform_init(void)
+{
+	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+	return 0;
+}
+arch_initcall(mrst_platform_init);
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
+	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
+	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
+	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
+	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
+	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
+	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
+	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
+};
+
+static struct gpio_keys_platform_data mrst_gpio_keys = {
+	.buttons	= gpio_button,
+	.rep		= 1,
+	.nbuttons	= -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mrst_gpio_keys,
+	},
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+	struct gpio_keys_button *gb = gpio_button;
+	int i, num, good = 0;
+
+	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+	for (i = 0; i < num; i++) {
+		gb[i].gpio = get_gpio_by_name(gb[i].desc);
+		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
+					gb[i].gpio);
+		if (gb[i].gpio == -1)
+			continue;
+
+		if (i != good)
+			gb[good] = gb[i];
+		good++;
+	}
+
+	if (good) {
+		mrst_gpio_keys.nbuttons = good;
+		return platform_device_register(&pb_device);
+	}
+	return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
new file mode 100644
index 0000000..ded9fbd
--- /dev/null
+++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
@@ -0,0 +1,177 @@
+/*
+ * intel_mid_vrtc.c: Driver for virtual RTC device on Intel MID platform
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based on RTC CMOS driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/time.h>
+#include <asm/fixmap.h>
+
+static unsigned char __iomem *vrtc_virt_base;
+
+unsigned char vrtc_cmos_read(unsigned char reg)
+{
+	unsigned char retval;
+
+	/* vRTC's registers range from 0x0 to 0xD */
+	if (reg > 0xd || !vrtc_virt_base)
+		return 0xff;
+
+	lock_cmos_prefix(reg);
+	retval = __raw_readb(vrtc_virt_base + (reg << 2));
+	lock_cmos_suffix(reg);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_read);
+
+void vrtc_cmos_write(unsigned char val, unsigned char reg)
+{
+	if (reg > 0xd || !vrtc_virt_base)
+		return;
+
+	lock_cmos_prefix(reg);
+	__raw_writeb(val, vrtc_virt_base + (reg << 2));
+	lock_cmos_suffix(reg);
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_write);
+
+void vrtc_get_time(struct timespec *now)
+{
+	u8 sec, min, hour, mday, mon;
+	unsigned long flags;
+	u32 year;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
+		cpu_relax();
+
+	sec = vrtc_cmos_read(RTC_SECONDS);
+	min = vrtc_cmos_read(RTC_MINUTES);
+	hour = vrtc_cmos_read(RTC_HOURS);
+	mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+	mon = vrtc_cmos_read(RTC_MONTH);
+	year = vrtc_cmos_read(RTC_YEAR);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	/* vRTC YEAR reg contains the offset to 1972 */
+	year += 1972;
+
+	pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
+		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
+
+	now->tv_sec = mktime(year, mon, mday, hour, min, sec);
+	now->tv_nsec = 0;
+}
+
+int vrtc_set_mmss(const struct timespec *now)
+{
+	unsigned long flags;
+	struct rtc_time tm;
+	int year;
+	int retval = 0;
+
+	rtc_time_to_tm(now->tv_sec, &tm);
+	if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
+		/*
+		 * tm.year is the number of years since 1900, and the
+		 * vrtc need the years since 1972.
+		 */
+		year = tm.tm_year - 72;
+		spin_lock_irqsave(&rtc_lock, flags);
+		vrtc_cmos_write(year, RTC_YEAR);
+		vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
+		vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
+		vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
+		vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
+		vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+	} else {
+		pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
+			__FUNCTION__, now->tv_sec);
+		retval = -EINVAL;
+	}
+	return retval;
+}
+
+void __init mrst_rtc_init(void)
+{
+	unsigned long vrtc_paddr;
+
+	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+
+	vrtc_paddr = sfi_mrtc_array[0].phys_addr;
+	if (!sfi_mrtc_num || !vrtc_paddr)
+		return;
+
+	vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
+								vrtc_paddr);
+	x86_platform.get_wallclock = vrtc_get_time;
+	x86_platform.set_wallclock = vrtc_set_mmss;
+}
+
+/*
+ * The Moorestown platform has a memory mapped virtual RTC device that emulates
+ * the programming interface of the RTC.
+ */
+
+static struct resource vrtc_resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device vrtc_device = {
+	.name		= "rtc_mrst",
+	.id		= -1,
+	.resource	= vrtc_resources,
+	.num_resources	= ARRAY_SIZE(vrtc_resources),
+};
+
+/* Register the RTC device if appropriate */
+static int __init mrst_device_create(void)
+{
+	/* No Moorestown, no device */
+	if (!mrst_identify_cpu())
+		return -ENODEV;
+	/* No timer, no device */
+	if (!sfi_mrtc_num)
+		return -ENODEV;
+
+	/* iomem resource */
+	vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
+	vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
+				MRST_VRTC_MAP_SZ;
+	/* irq resource */
+	vrtc_resources[1].start = sfi_mrtc_array[0].irq;
+	vrtc_resources[1].end = sfi_mrtc_array[0].irq;
+
+	return platform_device_register(&vrtc_device);
+}
+
+module_init(mrst_device_create);
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
deleted file mode 100644
index af1da7e..0000000
--- a/arch/x86/platform/mrst/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_X86_INTEL_MID)	+= mrst.o
-obj-$(CONFIG_X86_INTEL_MID)	+= vrtc.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID)	+= early_printk_mrst.o
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
deleted file mode 100644
index 39ecc27..0000000
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * early_printk_mrst.c - early consoles for Intel MID platforms
- *
- * Copyright (c) 2008-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-/*
- * This file implements two early consoles named mrst and hsu.
- * mrst is based on Maxim3110 spi-uart device, it exists in both
- * Moorestown and Medfield platforms, while hsu is based on a High
- * Speed UART device which only exists in the Medfield platform
- */
-
-#include <linux/serial_reg.h>
-#include <linux/serial_mfd.h>
-#include <linux/kmsg_dump.h>
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/mrst.h>
-
-#define MRST_SPI_TIMEOUT		0x200000
-#define MRST_REGBASE_SPI0		0xff128000
-#define MRST_REGBASE_SPI1		0xff128400
-#define MRST_CLK_SPI0_REG		0xff11d86c
-
-/* Bit fields in CTRLR0 */
-#define SPI_DFS_OFFSET			0
-
-#define SPI_FRF_OFFSET			4
-#define SPI_FRF_SPI			0x0
-#define SPI_FRF_SSP			0x1
-#define SPI_FRF_MICROWIRE		0x2
-#define SPI_FRF_RESV			0x3
-
-#define SPI_MODE_OFFSET			6
-#define SPI_SCPH_OFFSET			6
-#define SPI_SCOL_OFFSET			7
-#define SPI_TMOD_OFFSET			8
-#define	SPI_TMOD_TR			0x0		/* xmit & recv */
-#define SPI_TMOD_TO			0x1		/* xmit only */
-#define SPI_TMOD_RO			0x2		/* recv only */
-#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
-
-#define SPI_SLVOE_OFFSET		10
-#define SPI_SRL_OFFSET			11
-#define SPI_CFS_OFFSET			12
-
-/* Bit fields in SR, 7 bits */
-#define SR_MASK				0x7f		/* cover 7 bits */
-#define SR_BUSY				(1 << 0)
-#define SR_TF_NOT_FULL			(1 << 1)
-#define SR_TF_EMPT			(1 << 2)
-#define SR_RF_NOT_EMPT			(1 << 3)
-#define SR_RF_FULL			(1 << 4)
-#define SR_TX_ERR			(1 << 5)
-#define SR_DCOL				(1 << 6)
-
-struct dw_spi_reg {
-	u32	ctrl0;
-	u32	ctrl1;
-	u32	ssienr;
-	u32	mwcr;
-	u32	ser;
-	u32	baudr;
-	u32	txfltr;
-	u32	rxfltr;
-	u32	txflr;
-	u32	rxflr;
-	u32	sr;
-	u32	imr;
-	u32	isr;
-	u32	risr;
-	u32	txoicr;
-	u32	rxoicr;
-	u32	rxuicr;
-	u32	msticr;
-	u32	icr;
-	u32	dmacr;
-	u32	dmatdlr;
-	u32	dmardlr;
-	u32	idr;
-	u32	version;
-
-	/* Currently operates as 32 bits, though only the low 16 bits matter */
-	u32	dr;
-} __packed;
-
-#define dw_readl(dw, name)		__raw_readl(&(dw)->name)
-#define dw_writel(dw, name, val)	__raw_writel((val), &(dw)->name)
-
-/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
-static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
-
-static u32 *pclk_spi0;
-/* Always contains an accessible address, start with 0 */
-static struct dw_spi_reg *pspi;
-
-static struct kmsg_dumper dw_dumper;
-static int dumper_registered;
-
-static void dw_kmsg_dump(struct kmsg_dumper *dumper,
-			 enum kmsg_dump_reason reason)
-{
-	static char line[1024];
-	size_t len;
-
-	/* When run to this, we'd better re-init the HW */
-	mrst_early_console_init();
-
-	while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
-		early_mrst_console.write(&early_mrst_console, line, len);
-}
-
-/* Set the ratio rate to 115200, 8n1, IRQ disabled */
-static void max3110_write_config(void)
-{
-	u16 config;
-
-	config = 0xc001;
-	dw_writel(pspi, dr, config);
-}
-
-/* Translate char to a eligible word and send to max3110 */
-static void max3110_write_data(char c)
-{
-	u16 data;
-
-	data = 0x8000 | c;
-	dw_writel(pspi, dr, data);
-}
-
-void mrst_early_console_init(void)
-{
-	u32 ctrlr0 = 0;
-	u32 spi0_cdiv;
-	u32 freq; /* Freqency info only need be searched once */
-
-	/* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
-	pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-							MRST_CLK_SPI0_REG);
-	spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
-	freq = 100000000 / (spi0_cdiv + 1);
-
-	if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
-		mrst_spi_paddr = MRST_REGBASE_SPI1;
-
-	pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
-						mrst_spi_paddr);
-
-	/* Disable SPI controller */
-	dw_writel(pspi, ssienr, 0);
-
-	/* Set control param, 8 bits, transmit only mode */
-	ctrlr0 = dw_readl(pspi, ctrl0);
-
-	ctrlr0 &= 0xfcc0;
-	ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
-		      | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
-	dw_writel(pspi, ctrl0, ctrlr0);
-
-	/*
-	 * Change the spi0 clk to comply with 115200 bps, use 100000 to
-	 * calculate the clk dividor to make the clock a little slower
-	 * than real baud rate.
-	 */
-	dw_writel(pspi, baudr, freq/100000);
-
-	/* Disable all INT for early phase */
-	dw_writel(pspi, imr, 0x0);
-
-	/* Set the cs to spi-uart */
-	dw_writel(pspi, ser, 0x2);
-
-	/* Enable the HW, the last step for HW init */
-	dw_writel(pspi, ssienr, 0x1);
-
-	/* Set the default configuration */
-	max3110_write_config();
-
-	/* Register the kmsg dumper */
-	if (!dumper_registered) {
-		dw_dumper.dump = dw_kmsg_dump;
-		kmsg_dump_register(&dw_dumper);
-		dumper_registered = 1;
-	}
-}
-
-/* Slave select should be called in the read/write function */
-static void early_mrst_spi_putc(char c)
-{
-	unsigned int timeout;
-	u32 sr;
-
-	timeout = MRST_SPI_TIMEOUT;
-	/* Early putc needs to make sure the TX FIFO is not full */
-	while (--timeout) {
-		sr = dw_readl(pspi, sr);
-		if (!(sr & SR_TF_NOT_FULL))
-			cpu_relax();
-		else
-			break;
-	}
-
-	if (!timeout)
-		pr_warn("MRST earlycon: timed out\n");
-	else
-		max3110_write_data(c);
-}
-
-/* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str,
-					unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_mrst_spi_putc('\r');
-		early_mrst_spi_putc(*str);
-		str++;
-	}
-}
-
-struct console early_mrst_console = {
-	.name =		"earlymrst",
-	.write =	early_mrst_spi_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-/*
- * Following is the early console based on Medfield HSU (High
- * Speed UART) device.
- */
-#define HSU_PORT_BASE		0xffa28080
-
-static void __iomem *phsu;
-
-void hsu_early_console_init(const char *s)
-{
-	unsigned long paddr, port = 0;
-	u8 lcr;
-
-	/*
-	 * Select the early HSU console port if specified by user in the
-	 * kernel command line.
-	 */
-	if (*s && !kstrtoul(s, 10, &port))
-		port = clamp_val(port, 0, 2);
-
-	paddr = HSU_PORT_BASE + port * 0x80;
-	phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
-
-	/* Disable FIFO */
-	writeb(0x0, phsu + UART_FCR);
-
-	/* Set to default 115200 bps, 8n1 */
-	lcr = readb(phsu + UART_LCR);
-	writeb((0x80 | lcr), phsu + UART_LCR);
-	writeb(0x18, phsu + UART_DLL);
-	writeb(lcr,  phsu + UART_LCR);
-	writel(0x3600, phsu + UART_MUL*4);
-
-	writeb(0x8, phsu + UART_MCR);
-	writeb(0x7, phsu + UART_FCR);
-	writeb(0x3, phsu + UART_LCR);
-
-	/* Clear IRQ status */
-	readb(phsu + UART_LSR);
-	readb(phsu + UART_RX);
-	readb(phsu + UART_IIR);
-	readb(phsu + UART_MSR);
-
-	/* Enable FIFO */
-	writeb(0x7, phsu + UART_FCR);
-}
-
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-static void early_hsu_putc(char ch)
-{
-	unsigned int timeout = 10000; /* 10ms */
-	u8 status;
-
-	while (--timeout) {
-		status = readb(phsu + UART_LSR);
-		if (status & BOTH_EMPTY)
-			break;
-		udelay(1);
-	}
-
-	/* Only write the char when there was no timeout */
-	if (timeout)
-		writeb(ch, phsu + UART_TX);
-}
-
-static void early_hsu_write(struct console *con, const char *str, unsigned n)
-{
-	int i;
-
-	for (i = 0; i < n && *str; i++) {
-		if (*str == '\n')
-			early_hsu_putc('\r');
-		early_hsu_putc(*str);
-		str++;
-	}
-}
-
-struct console early_hsu_console = {
-	.name =		"earlyhsu",
-	.write =	early_hsu_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
deleted file mode 100644
index 2a45eab..0000000
--- a/arch/x86/platform/mrst/mrst.c
+++ /dev/null
@@ -1,1054 +0,0 @@
-/*
- * mrst.c: Intel Moorestown platform specific setup code
- *
- * (C) Copyright 2008 Intel Corporation
- * Author: Jacob Pan (jacob.jun.pan@...el.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#define pr_fmt(fmt) "mrst: " fmt
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/gpio.h>
-#include <linux/i2c/tc35876x.h>
-
-#include <asm/setup.h>
-#include <asm/mpspec_def.h>
-#include <asm/hw_irq.h>
-#include <asm/apic.h>
-#include <asm/io_apic.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/intel_scu_ipc.h>
-#include <asm/apb_timer.h>
-#include <asm/reboot.h>
-
-/*
- * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
- * cmdline option x86_mrst_timer can be used to override the configuration
- * to prefer one or the other.
- * at runtime, there are basically three timer configurations:
- * 1. per cpu apbt clock only
- * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
- * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
- *
- * by default (without cmdline option), platform code first detects cpu type
- * to see if we are on lincroft or penwell, then set up both lapic or apbt
- * clocks accordingly.
- * i.e. by default, medfield uses configuration #2, moorestown uses #1.
- * config #3 is supported but not recommended on medfield.
- *
- * rating and feature summary:
- * lapic (with C3STOP) --------- 100
- * apbt (always-on) ------------ 110
- * lapic (always-on,ARAT) ------ 150
- */
-
-enum mrst_timer_options mrst_timer_options;
-
-static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
-static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
-enum mrst_cpu_type __mrst_cpu_chip;
-EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
-
-int sfi_mtimer_num;
-
-struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
-EXPORT_SYMBOL_GPL(sfi_mrtc_array);
-int sfi_mrtc_num;
-
-static void mrst_power_off(void)
-{
-}
-
-static void mrst_reboot(void)
-{
-	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
-}
-
-/* parse all the mtimer info to a static mtimer array */
-static int __init sfi_parse_mtmr(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_timer_table_entry *pentry;
-	struct mpc_intsrc mp_irq;
-	int totallen;
-
-	sb = (struct sfi_table_simple *)table;
-	if (!sfi_mtimer_num) {
-		sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
-					struct sfi_timer_table_entry);
-		pentry = (struct sfi_timer_table_entry *) sb->pentry;
-		totallen = sfi_mtimer_num * sizeof(*pentry);
-		memcpy(sfi_mtimer_array, pentry, totallen);
-	}
-
-	pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
-	pentry = sfi_mtimer_array;
-	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
-		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
-			" irq = %d\n", totallen, (u32)pentry->phys_addr,
-			pentry->freq_hz, pentry->irq);
-			if (!pentry->irq)
-				continue;
-			mp_irq.type = MP_INTSRC;
-			mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
-			mp_irq.irqflag = 5;
-			mp_irq.srcbus = MP_BUS_ISA;
-			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
-			mp_irq.dstapic = MP_APIC_ALL;
-			mp_irq.dstirq = pentry->irq;
-			mp_save_irq(&mp_irq);
-	}
-
-	return 0;
-}
-
-struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
-{
-	int i;
-	if (hint < sfi_mtimer_num) {
-		if (!sfi_mtimer_usage[hint]) {
-			pr_debug("hint taken for timer %d irq %d\n",
-				hint, sfi_mtimer_array[hint].irq);
-			sfi_mtimer_usage[hint] = 1;
-			return &sfi_mtimer_array[hint];
-		}
-	}
-	/* take the first timer available */
-	for (i = 0; i < sfi_mtimer_num;) {
-		if (!sfi_mtimer_usage[i]) {
-			sfi_mtimer_usage[i] = 1;
-			return &sfi_mtimer_array[i];
-		}
-		i++;
-	}
-	return NULL;
-}
-
-void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
-{
-	int i;
-	for (i = 0; i < sfi_mtimer_num;) {
-		if (mtmr->irq == sfi_mtimer_array[i].irq) {
-			sfi_mtimer_usage[i] = 0;
-			return;
-		}
-		i++;
-	}
-}
-
-/* parse all the mrtc info to a global mrtc array */
-int __init sfi_parse_mrtc(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_rtc_table_entry *pentry;
-	struct mpc_intsrc mp_irq;
-
-	int totallen;
-
-	sb = (struct sfi_table_simple *)table;
-	if (!sfi_mrtc_num) {
-		sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
-						struct sfi_rtc_table_entry);
-		pentry = (struct sfi_rtc_table_entry *)sb->pentry;
-		totallen = sfi_mrtc_num * sizeof(*pentry);
-		memcpy(sfi_mrtc_array, pentry, totallen);
-	}
-
-	pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
-	pentry = sfi_mrtc_array;
-	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
-		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
-			totallen, (u32)pentry->phys_addr, pentry->irq);
-		mp_irq.type = MP_INTSRC;
-		mp_irq.irqtype = mp_INT;
-		mp_irq.irqflag = 0xf;	/* level trigger and active low */
-		mp_irq.srcbus = MP_BUS_ISA;
-		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
-		mp_irq.dstapic = MP_APIC_ALL;
-		mp_irq.dstirq = pentry->irq;
-		mp_save_irq(&mp_irq);
-	}
-	return 0;
-}
-
-static unsigned long __init mrst_calibrate_tsc(void)
-{
-	unsigned long fast_calibrate;
-	u32 lo, hi, ratio, fsb;
-
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
-	ratio = (hi >> 8) & 0x1f;
-	pr_debug("ratio is %d\n", ratio);
-	if (!ratio) {
-		pr_err("read a zero ratio, should be incorrect!\n");
-		pr_err("force tsc ratio to 16 ...\n");
-		ratio = 16;
-	}
-	rdmsr(MSR_FSB_FREQ, lo, hi);
-	if ((lo & 0x7) == 0x7)
-		fsb = PENWELL_FSB_FREQ_83SKU;
-	else
-		fsb = PENWELL_FSB_FREQ_100SKU;
-	fast_calibrate = ratio * fsb;
-	pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
-	lapic_timer_frequency = fsb * 1000 / HZ;
-	/* mark tsc clocksource as reliable */
-	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-	
-	if (fast_calibrate)
-		return fast_calibrate;
-
-	return 0;
-}
-
-static void __init mrst_time_init(void)
-{
-	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
-	switch (mrst_timer_options) {
-	case MRST_TIMER_APBT_ONLY:
-		break;
-	case MRST_TIMER_LAPIC_APBT:
-		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
-		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
-		break;
-	default:
-		if (!boot_cpu_has(X86_FEATURE_ARAT))
-			break;
-		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
-		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
-		return;
-	}
-	/* we need at least one APB timer */
-	pre_init_apic_IRQ0();
-	apbt_time_init();
-}
-
-static void mrst_arch_setup(void)
-{
-	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
-		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
-	else {
-		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
-			boot_cpu_data.x86, boot_cpu_data.x86_model);
-		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
-	}
-}
-
-/* MID systems don't have i8042 controller */
-static int mrst_i8042_detect(void)
-{
-	return 0;
-}
-
-/*
- * Moorestown does not have external NMI source nor port 0x61 to report
- * NMI status. The possible NMI sources are from pmu as a result of NMI
- * watchdog or lock debug. Reading io port 0x61 results in 0xff which
- * misled NMI handler.
- */
-static unsigned char mrst_get_nmi_reason(void)
-{
-	return 0;
-}
-
-/*
- * Moorestown specific x86_init function overrides and early setup
- * calls.
- */
-void __init x86_mrst_early_setup(void)
-{
-	x86_init.resources.probe_roms = x86_init_noop;
-	x86_init.resources.reserve_resources = x86_init_noop;
-
-	x86_init.timers.timer_init = mrst_time_init;
-	x86_init.timers.setup_percpu_clockev = x86_init_noop;
-
-	x86_init.irqs.pre_vector_init = x86_init_noop;
-
-	x86_init.oem.arch_setup = mrst_arch_setup;
-
-	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
-
-	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
-	x86_platform.i8042_detect = mrst_i8042_detect;
-	x86_init.timers.wallclock_init = mrst_rtc_init;
-	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
-
-	x86_init.pci.init = pci_mrst_init;
-	x86_init.pci.fixup_irqs = x86_init_noop;
-
-	legacy_pic = &null_legacy_pic;
-
-	/* Moorestown specific power_off/restart method */
-	pm_power_off = mrst_power_off;
-	machine_ops.emergency_restart  = mrst_reboot;
-
-	/* Avoid searching for BIOS MP tables */
-	x86_init.mpparse.find_smp_config = x86_init_noop;
-	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
-	set_bit(MP_BUS_ISA, mp_bus_not_pci);
-}
-
-/*
- * if user does not want to use per CPU apb timer, just give it a lower rating
- * than local apic timer and skip the late per cpu timer init.
- */
-static inline int __init setup_x86_mrst_timer(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp("apbt_only", arg) == 0)
-		mrst_timer_options = MRST_TIMER_APBT_ONLY;
-	else if (strcmp("lapic_and_apbt", arg) == 0)
-		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
-	else {
-		pr_warn("X86 MRST timer option %s not recognised"
-			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
-			   arg);
-		return -EINVAL;
-	}
-	return 0;
-}
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
-
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static struct sfi_gpio_table_entry *gpio_table;
-static int gpio_num_entry;
-
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_gpio_table_entry *pentry;
-	int num, i;
-
-	if (gpio_table)
-		return 0;
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
-	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
-	gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
-	if (!gpio_table)
-		return -1;
-	memcpy(gpio_table, pentry, num * sizeof(*pentry));
-	gpio_num_entry = num;
-
-	pr_debug("GPIO pin info:\n");
-	for (i = 0; i < num; i++, pentry++)
-		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
-		" pin = %d\n", i,
-			pentry->controller_name,
-			pentry->pin_name,
-			pentry->pin_no);
-	return 0;
-}
-
-static int get_gpio_by_name(const char *name)
-{
-	struct sfi_gpio_table_entry *pentry = gpio_table;
-	int i;
-
-	if (!pentry)
-		return -1;
-	for (i = 0; i < gpio_num_entry; i++, pentry++) {
-		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
-			return pentry->pin_no;
-	}
-	return -1;
-}
-
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
-	char name[SFI_NAME_LEN + 1];
-	u8 type;
-	u8 delay;
-	void *(*get_platform_data)(void *info);
-};
-
-/* the offset for the mapping of global gpio pin to irq */
-#define MRST_IRQ_OFFSET 0x100
-
-static void __init *pmic_gpio_platform_data(void *info)
-{
-	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
-	int gpio_base = get_gpio_by_name("pmic_gpio_base");
-
-	if (gpio_base == -1)
-		gpio_base = 64;
-	pmic_gpio_pdata.gpio_base = gpio_base;
-	pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
-	pmic_gpio_pdata.gpiointr = 0xffffeff8;
-
-	return &pmic_gpio_pdata;
-}
-
-static void __init *max3111_platform_data(void *info)
-{
-	struct spi_board_info *spi_info = info;
-	int intr = get_gpio_by_name("max3111_int");
-
-	spi_info->mode = SPI_MODE_0;
-	if (intr == -1)
-		return NULL;
-	spi_info->irq = intr + MRST_IRQ_OFFSET;
-	return NULL;
-}
-
-/* we have multiple max7315 on the board ... */
-#define MAX7315_NUM 2
-static void __init *max7315_platform_data(void *info)
-{
-	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
-	static int nr;
-	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	if (nr == MAX7315_NUM) {
-		pr_err("too many max7315s, we only support %d\n",
-				MAX7315_NUM);
-		return NULL;
-	}
-	/* we have several max7315 on the board, we only need load several
-	 * instances of the same pca953x driver to cover them
-	 */
-	strcpy(i2c_info->type, "max7315");
-	if (nr++) {
-		sprintf(base_pin_name, "max7315_%d_base", nr);
-		sprintf(intr_pin_name, "max7315_%d_int", nr);
-	} else {
-		strcpy(base_pin_name, "max7315_base");
-		strcpy(intr_pin_name, "max7315_int");
-	}
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base == -1)
-		return NULL;
-	max7315->gpio_base = gpio_base;
-	if (intr != -1) {
-		i2c_info->irq = intr + MRST_IRQ_OFFSET;
-		max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		max7315->irq_base = -1;
-	}
-	return max7315;
-}
-
-static void *tca6416_platform_data(void *info)
-{
-	static struct pca953x_platform_data tca6416;
-	struct i2c_board_info *i2c_info = info;
-	int gpio_base, intr;
-	char base_pin_name[SFI_NAME_LEN + 1];
-	char intr_pin_name[SFI_NAME_LEN + 1];
-
-	strcpy(i2c_info->type, "tca6416");
-	strcpy(base_pin_name, "tca6416_base");
-	strcpy(intr_pin_name, "tca6416_int");
-
-	gpio_base = get_gpio_by_name(base_pin_name);
-	intr = get_gpio_by_name(intr_pin_name);
-
-	if (gpio_base == -1)
-		return NULL;
-	tca6416.gpio_base = gpio_base;
-	if (intr != -1) {
-		i2c_info->irq = intr + MRST_IRQ_OFFSET;
-		tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
-	} else {
-		i2c_info->irq = -1;
-		tca6416.irq_base = -1;
-	}
-	return &tca6416;
-}
-
-static void *mpu3050_platform_data(void *info)
-{
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("mpu3050_int");
-
-	if (intr == -1)
-		return NULL;
-
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	return NULL;
-}
-
-static void __init *emc1403_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("thermal_int");
-	int intr2nd = get_gpio_by_name("thermal_alert");
-
-	if (intr == -1 || intr2nd == -1)
-		return NULL;
-
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static void __init *lis331dl_platform_data(void *info)
-{
-	static short intr2nd_pdata;
-	struct i2c_board_info *i2c_info = info;
-	int intr = get_gpio_by_name("accel_int");
-	int intr2nd = get_gpio_by_name("accel_2");
-
-	if (intr == -1 || intr2nd == -1)
-		return NULL;
-
-	i2c_info->irq = intr + MRST_IRQ_OFFSET;
-	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
-
-	return &intr2nd_pdata;
-}
-
-static void __init *no_platform_data(void *info)
-{
-	return NULL;
-}
-
-static struct resource msic_resources[] = {
-	{
-		.start	= INTEL_MSIC_IRQ_PHYS_BASE,
-		.end	= INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct intel_msic_platform_data msic_pdata;
-
-static struct platform_device msic_device = {
-	.name		= "intel_msic",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &msic_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(msic_resources),
-	.resource	= msic_resources,
-};
-
-static inline bool mrst_has_msic(void)
-{
-	return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
-}
-
-static int msic_scu_status_change(struct notifier_block *nb,
-				  unsigned long code, void *data)
-{
-	if (code == SCU_DOWN) {
-		platform_device_unregister(&msic_device);
-		return 0;
-	}
-
-	return platform_device_register(&msic_device);
-}
-
-static int __init msic_init(void)
-{
-	static struct notifier_block msic_scu_notifier = {
-		.notifier_call	= msic_scu_status_change,
-	};
-
-	/*
-	 * We need to be sure that the SCU IPC is ready before MSIC device
-	 * can be registered.
-	 */
-	if (mrst_has_msic())
-		intel_scu_notifier_add(&msic_scu_notifier);
-
-	return 0;
-}
-arch_initcall(msic_init);
-
-/*
- * msic_generic_platform_data - sets generic platform data for the block
- * @info: pointer to the SFI device table entry for this block
- * @block: MSIC block
- *
- * Function sets IRQ number from the SFI table entry for given device to
- * the MSIC platform data.
- */
-static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
-{
-	struct sfi_device_table_entry *entry = info;
-
-	BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
-	msic_pdata.irq[block] = entry->irq;
-
-	return no_platform_data(info);
-}
-
-static void *msic_battery_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
-}
-
-static void *msic_gpio_platform_data(void *info)
-{
-	static struct intel_msic_gpio_pdata pdata;
-	int gpio = get_gpio_by_name("msic_gpio_base");
-
-	if (gpio < 0)
-		return NULL;
-
-	pdata.gpio_base = gpio;
-	msic_pdata.gpio = &pdata;
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
-}
-
-static void *msic_audio_platform_data(void *info)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
-	if (IS_ERR(pdev)) {
-		pr_err("failed to create audio platform device\n");
-		return NULL;
-	}
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
-}
-
-static void *msic_power_btn_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static void *msic_ocd_platform_data(void *info)
-{
-	static struct intel_msic_ocd_pdata pdata;
-	int gpio = get_gpio_by_name("ocd_gpio");
-
-	if (gpio < 0)
-		return NULL;
-
-	pdata.gpio = gpio;
-	msic_pdata.ocd = &pdata;
-
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
-}
-
-static void *msic_thermal_platform_data(void *info)
-{
-	return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
-}
-
-/* tc35876x DSI-LVDS bridge chip and panel platform data */
-static void *tc35876x_platform_data(void *data)
-{
-	static struct tc35876x_platform_data pdata;
-
-	/* gpio pins set to -1 will not be used by the driver */
-	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
-	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
-	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
-
-	return &pdata;
-}
-
-static const struct devs_id __initconst device_ids[] = {
-	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
-	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
-	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
-	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
-	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
-	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
-	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
-	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
-	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
-	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
-	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
-	{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
-
-	/* MSIC subdevices */
-	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
-	{"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
-	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
-	{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
-	{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
-	{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
-
-	{},
-};
-
-#define MAX_IPCDEVS	24
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static int ipc_next_dev;
-
-#define MAX_SCU_SPI	24
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static int spi_next_dev;
-
-#define MAX_SCU_I2C	24
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static int i2c_bus[MAX_SCU_I2C];
-static int i2c_next_dev;
-
-static void __init intel_scu_device_register(struct platform_device *pdev)
-{
-	if (ipc_next_dev == MAX_IPCDEVS)
-		pr_err("too many SCU IPC devices");
-	else
-		ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
-	struct spi_board_info *new_dev;
-
-	if (spi_next_dev == MAX_SCU_SPI) {
-		pr_err("too many SCU SPI devices");
-		return;
-	}
-
-	new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
-	if (!new_dev) {
-		pr_err("failed to alloc mem for delayed spi dev %s\n",
-			sdev->modalias);
-		return;
-	}
-	memcpy(new_dev, sdev, sizeof(*sdev));
-
-	spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
-						struct i2c_board_info *idev)
-{
-	struct i2c_board_info *new_dev;
-
-	if (i2c_next_dev == MAX_SCU_I2C) {
-		pr_err("too many SCU I2C devices");
-		return;
-	}
-
-	new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
-	if (!new_dev) {
-		pr_err("failed to alloc mem for delayed i2c dev %s\n",
-			idev->type);
-		return;
-	}
-	memcpy(new_dev, idev, sizeof(*idev));
-
-	i2c_bus[i2c_next_dev] = bus;
-	i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
-	int i;
-
-	for (i = 0; i < ipc_next_dev; i++)
-		platform_device_add(ipc_devs[i]);
-
-	for (i = 0; i < spi_next_dev; i++)
-		spi_register_board_info(spi_devs[i], 1);
-
-	for (i = 0; i < i2c_next_dev; i++) {
-		struct i2c_adapter *adapter;
-		struct i2c_client *client;
-
-		adapter = i2c_get_adapter(i2c_bus[i]);
-		if (adapter) {
-			client = i2c_new_device(adapter, i2c_devs[i]);
-			if (!client)
-				pr_err("can't create i2c device %s\n",
-					i2c_devs[i]->type);
-		} else
-			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
-	}
-	intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
-	int i;
-
-	intel_scu_notifier_post(SCU_DOWN, NULL);
-
-	for (i = 0; i < ipc_next_dev; i++)
-		platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
-	/* Single threaded */
-	static struct resource __initdata res = {
-		.name = "IRQ",
-		.flags = IORESOURCE_IRQ,
-	};
-	res.start = irq;
-	platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
-{
-	const struct devs_id *dev = device_ids;
-	struct platform_device *pdev;
-	void *pdata = NULL;
-
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_IPC &&
-			!strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(entry);
-			break;
-		}
-		dev++;
-	}
-
-	/*
-	 * On Medfield the platform device creation is handled by the MSIC
-	 * MFD driver so we don't need to do it here.
-	 */
-	if (mrst_has_msic())
-		return;
-
-	pdev = platform_device_alloc(entry->name, 0);
-	if (pdev == NULL) {
-		pr_err("out of memory for SFI platform device '%s'.\n",
-			entry->name);
-		return;
-	}
-	install_irq_resource(pdev, entry->irq);
-
-	pdev->dev.platform_data = pdata;
-	intel_scu_device_register(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
-{
-	const struct devs_id *dev = device_ids;
-	void *pdata = NULL;
-
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_SPI &&
-			!strncmp(dev->name, spi_info->modalias,
-						SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(spi_info);
-			break;
-		}
-		dev++;
-	}
-	spi_info->platform_data = pdata;
-	if (dev->delay)
-		intel_scu_spi_device_register(spi_info);
-	else
-		spi_register_board_info(spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
-{
-	const struct devs_id *dev = device_ids;
-	void *pdata = NULL;
-
-	while (dev->name[0]) {
-		if (dev->type == SFI_DEV_TYPE_I2C &&
-			!strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
-			pdata = dev->get_platform_data(i2c_info);
-			break;
-		}
-		dev++;
-	}
-	i2c_info->platform_data = pdata;
-
-	if (dev->delay)
-		intel_scu_i2c_device_register(bus, i2c_info);
-	else
-		i2c_register_board_info(bus, i2c_info, 1);
-}
-
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
-	struct sfi_table_simple *sb;
-	struct sfi_device_table_entry *pentry;
-	struct spi_board_info spi_info;
-	struct i2c_board_info i2c_info;
-	int num, i, bus;
-	int ioapic;
-	struct io_apic_irq_attr irq_attr;
-
-	sb = (struct sfi_table_simple *)table;
-	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
-	pentry = (struct sfi_device_table_entry *)sb->pentry;
-
-	for (i = 0; i < num; i++, pentry++) {
-		int irq = pentry->irq;
-
-		if (irq != (u8)0xff) { /* native RTE case */
-			/* these SPI2 devices are not exposed to system as PCI
-			 * devices, but they have separate RTE entry in IOAPIC
-			 * so we have to enable them one by one here
-			 */
-			ioapic = mp_find_ioapic(irq);
-			irq_attr.ioapic = ioapic;
-			irq_attr.ioapic_pin = irq;
-			irq_attr.trigger = 1;
-			irq_attr.polarity = 1;
-			io_apic_set_pci_routing(NULL, irq, &irq_attr);
-		} else
-			irq = 0; /* No irq */
-
-		switch (pentry->type) {
-		case SFI_DEV_TYPE_IPC:
-			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
-				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
-			sfi_handle_ipc_dev(pentry);
-			break;
-		case SFI_DEV_TYPE_SPI:
-			memset(&spi_info, 0, sizeof(spi_info));
-			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
-			spi_info.irq = irq;
-			spi_info.bus_num = pentry->host_num;
-			spi_info.chip_select = pentry->addr;
-			spi_info.max_speed_hz = pentry->max_freq;
-			pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
-				"irq = 0x%2x, max_freq = %d, cs = %d\n", i,
-				spi_info.bus_num,
-				spi_info.modalias,
-				spi_info.irq,
-				spi_info.max_speed_hz,
-				spi_info.chip_select);
-			sfi_handle_spi_dev(&spi_info);
-			break;
-		case SFI_DEV_TYPE_I2C:
-			memset(&i2c_info, 0, sizeof(i2c_info));
-			bus = pentry->host_num;
-			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
-			i2c_info.irq = irq;
-			i2c_info.addr = pentry->addr;
-			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
-				"irq = 0x%2x, addr = 0x%x\n", i, bus,
-				i2c_info.type,
-				i2c_info.irq,
-				i2c_info.addr);
-			sfi_handle_i2c_dev(bus, &i2c_info);
-			break;
-		case SFI_DEV_TYPE_UART:
-		case SFI_DEV_TYPE_HSI:
-		default:
-			break;
-		}
-	}
-	return 0;
-}
-
-static int __init mrst_platform_init(void)
-{
-	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
-	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
-	return 0;
-}
-arch_initcall(mrst_platform_init);
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
-	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
-	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
-	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
-	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
-	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
-	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
-	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
-	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
-	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
-};
-
-static struct gpio_keys_platform_data mrst_gpio_keys = {
-	.buttons	= gpio_button,
-	.rep		= 1,
-	.nbuttons	= -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mrst_gpio_keys,
-	},
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
-	struct gpio_keys_button *gb = gpio_button;
-	int i, num, good = 0;
-
-	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
-	for (i = 0; i < num; i++) {
-		gb[i].gpio = get_gpio_by_name(gb[i].desc);
-		pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
-					gb[i].gpio);
-		if (gb[i].gpio == -1)
-			continue;
-
-		if (i != good)
-			gb[good] = gb[i];
-		good++;
-	}
-
-	if (good) {
-		mrst_gpio_keys.nbuttons = good;
-		return platform_device_register(&pb_device);
-	}
-	return 0;
-}
-late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
deleted file mode 100644
index ca4f7d9..0000000
--- a/arch/x86/platform/mrst/vrtc.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * vrtc.c: Driver for virtual RTC device on Intel MID platform
- *
- * (C) Copyright 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- *
- * Note:
- * VRTC is emulated by system controller firmware, the real HW
- * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
- * in a memory mapped IO space that is visible to the host IA
- * processor.
- *
- * This driver is based on RTC CMOS driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/platform_device.h>
-
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
-#include <asm/time.h>
-#include <asm/fixmap.h>
-
-static unsigned char __iomem *vrtc_virt_base;
-
-unsigned char vrtc_cmos_read(unsigned char reg)
-{
-	unsigned char retval;
-
-	/* vRTC's registers range from 0x0 to 0xD */
-	if (reg > 0xd || !vrtc_virt_base)
-		return 0xff;
-
-	lock_cmos_prefix(reg);
-	retval = __raw_readb(vrtc_virt_base + (reg << 2));
-	lock_cmos_suffix(reg);
-	return retval;
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_read);
-
-void vrtc_cmos_write(unsigned char val, unsigned char reg)
-{
-	if (reg > 0xd || !vrtc_virt_base)
-		return;
-
-	lock_cmos_prefix(reg);
-	__raw_writeb(val, vrtc_virt_base + (reg << 2));
-	lock_cmos_suffix(reg);
-}
-EXPORT_SYMBOL_GPL(vrtc_cmos_write);
-
-void vrtc_get_time(struct timespec *now)
-{
-	u8 sec, min, hour, mday, mon;
-	unsigned long flags;
-	u32 year;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-
-	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
-		cpu_relax();
-
-	sec = vrtc_cmos_read(RTC_SECONDS);
-	min = vrtc_cmos_read(RTC_MINUTES);
-	hour = vrtc_cmos_read(RTC_HOURS);
-	mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
-	mon = vrtc_cmos_read(RTC_MONTH);
-	year = vrtc_cmos_read(RTC_YEAR);
-
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	/* vRTC YEAR reg contains the offset to 1972 */
-	year += 1972;
-
-	pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
-		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
-
-	now->tv_sec = mktime(year, mon, mday, hour, min, sec);
-	now->tv_nsec = 0;
-}
-
-int vrtc_set_mmss(const struct timespec *now)
-{
-	unsigned long flags;
-	struct rtc_time tm;
-	int year;
-	int retval = 0;
-
-	rtc_time_to_tm(now->tv_sec, &tm);
-	if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
-		/*
-		 * tm.year is the number of years since 1900, and the
-		 * vrtc need the years since 1972.
-		 */
-		year = tm.tm_year - 72;
-		spin_lock_irqsave(&rtc_lock, flags);
-		vrtc_cmos_write(year, RTC_YEAR);
-		vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
-		vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
-		vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
-		vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
-		vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-	} else {
-		pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
-			__FUNCTION__, now->tv_sec);
-		retval = -EINVAL;
-	}
-	return retval;
-}
-
-void __init mrst_rtc_init(void)
-{
-	unsigned long vrtc_paddr;
-
-	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
-
-	vrtc_paddr = sfi_mrtc_array[0].phys_addr;
-	if (!sfi_mrtc_num || !vrtc_paddr)
-		return;
-
-	vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC,
-								vrtc_paddr);
-	x86_platform.get_wallclock = vrtc_get_time;
-	x86_platform.set_wallclock = vrtc_set_mmss;
-}
-
-/*
- * The Moorestown platform has a memory mapped virtual RTC device that emulates
- * the programming interface of the RTC.
- */
-
-static struct resource vrtc_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device vrtc_device = {
-	.name		= "rtc_mrst",
-	.id		= -1,
-	.resource	= vrtc_resources,
-	.num_resources	= ARRAY_SIZE(vrtc_resources),
-};
-
-/* Register the RTC device if appropriate */
-static int __init mrst_device_create(void)
-{
-	/* No Moorestown, no device */
-	if (!mrst_identify_cpu())
-		return -ENODEV;
-	/* No timer, no device */
-	if (!sfi_mrtc_num)
-		return -ENODEV;
-
-	/* iomem resource */
-	vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
-	vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
-				MRST_VRTC_MAP_SZ;
-	/* irq resource */
-	vrtc_resources[1].start = sfi_mrtc_array[0].irq;
-	vrtc_resources[1].end = sfi_mrtc_array[0].irq;
-
-	return platform_device_register(&vrtc_device);
-}
-
-module_init(mrst_device_create);
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
index 45d5af0..5b646c1 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
@@ -39,7 +39,7 @@
 #include "psb_intel_reg.h"
 #include "mdfld_output.h"
 
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 
 #define FLD_MASK(start, end)	(((1 << ((start) - (end) + 1)) - 1) << (end))
 #define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 08747fd..7a9ce00 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -26,7 +26,7 @@
 #include "psb_drv.h"
 #include "psb_reg.h"
 #include "psb_intel_reg.h"
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/intel_scu_ipc.h>
 #include "mid_bios.h"
 #include "intel_bios.h"
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
index e77d721..3ece553 100644
--- a/drivers/gpu/drm/gma500/oaktrail_lvds.c
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -22,7 +22,7 @@
 
 #include <linux/i2c.h>
 #include <drm/drmP.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 
 #include "intel_bios.h"
 #include "psb_drv.h"
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 9215ed7..5f8f6c9 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/sfi.h>
 #include <linux/module.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 #include <asm/intel_scu_ipc.h>
 
 /* IPC defines the following message types */
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 578baf9..315209d9 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -38,8 +38,8 @@
 
 #include <asm-generic/rtc.h>
 #include <asm/intel_scu_ipc.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
 
 struct mrst_rtc {
 	struct rtc_device	*rtc;
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 9dda2d0..07964d8 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -48,7 +48,7 @@
 #include <linux/atomic.h>
 #include <asm/intel_scu_ipc.h>
 #include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
 
 #include "intel_scu_watchdog.h"
 
-- 
1.8.4.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists