lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1382124411-29023-1-git-send-email-b.brezillon@overkiz.com>
Date:	Fri, 18 Oct 2013 21:26:51 +0200
From:	Boris BREZILLON <b.brezillon@...rkiz.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>,
	Alan Stern <stern@...land.harvard.edu>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	Boris BREZILLON <b.brezillon@...rkiz.com>
Subject: [PATCH] USB: ehci-atmel: add usb_clk for transition to CCF

The AT91 PMC (Power Management Controller) provides a USB clock used by
the different USB controllers (ehci, ohci and udc).
The atmel-ehci driver must configure the usb clock rate to 48Mhz in order
to get a fully functionnal USB host controller.
This configuration was formely done in mach-at91/clock.c, but will be
bypassed when moving to common clk framework.

This patch adds support for usb clock retrieval and configuration only if
CCF is enabled (CONFIG_COMMON_CLK).

Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
---
 drivers/usb/host/ehci-atmel.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 3b645ff..f417526 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -30,13 +30,17 @@ static const char hcd_name[] = "ehci-atmel";
 static struct hc_driver __read_mostly ehci_atmel_hc_driver;
 
 /* interface and function clocks */
-static struct clk *iclk, *fclk;
+static struct clk *iclk, *fclk, *uclk;
 static int clocked;
 
 /*-------------------------------------------------------------------------*/
 
 static void atmel_start_clock(void)
 {
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(uclk, 48000000);
+		clk_prepare_enable(uclk);
+	}
 	clk_prepare_enable(iclk);
 	clk_prepare_enable(fclk);
 	clocked = 1;
@@ -46,6 +50,8 @@ static void atmel_stop_clock(void)
 {
 	clk_disable_unprepare(fclk);
 	clk_disable_unprepare(iclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_disable_unprepare(uclk);
 	clocked = 0;
 }
 
@@ -130,6 +136,14 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
 		retval = -ENOENT;
 		goto fail_request_resource;
 	}
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		uclk = devm_clk_get(&pdev->dev, "usb_clk");
+		if (IS_ERR(uclk)) {
+			dev_err(&pdev->dev, "failed to get uclk\n");
+			retval = PTR_ERR(uclk);
+			goto fail_request_resource;
+		}
+	}
 
 	ehci = hcd_to_ehci(hcd);
 	/* registers start at offset 0x0 */
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ