[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1382365111-6533-1-git-send-email-t.stanislaws@samsung.com>
Date: Mon, 21 Oct 2013 16:18:19 +0200
From: Tomasz Stanislawski <t.stanislaws@...sung.com>
To: devicetree@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: dri-devel@...ts.freedesktop.org, kyungmin.park@...sung.com,
t.figa@...sung.com, kishon@...com, sw0312.kim@...sung.com,
inki.dae@...sung.com, rahul.sharma@...sung.com,
kgene.kim@...sung.com, s.nawrocki@...sung.com,
thomas.abraham@...aro.org, mturquette@...aro.org,
Tomasz Stanislawski <t.stanislaws@...sung.com>
Subject: [RFC 00/12] Add DRM Exynos HDMI on SoCs from Exynos4 family
This patchset adds support for HDMI at SoCs from Exynos4 family. The patches
are rebased on kishon/next. Additionally, The patchset contains small fixes to
PHY and CLK frameworks. I preferred to keep all the patches together for the
first version of the RFC.
The interesting part might be 'propagation of clk_set_parent()'. This feature
allows to remove the usage of artificial clocks in drivers. Such a situation
happens for Exynos HDMI and 'mout_hdmi' where the clock is not even mentioned in
some versions of SoC's documentation. Since enabling and setting rate can be
propagated I think that clk_set_parent() should also be propagated. This would
simplify driver's code and make it less dependant on SoC's version.
Another interesting feature refers to simple PHY driver. This driver register
a PHY interface that operates by setting a special bit in platform register.
This situation is very common in Exynos SoCs. The current version supports
only one phy per node. The code might be modified to support multiple phys
from single simple-phy provider to avoid creation of multiple nodes in DT.
All comments are welcome.
Regards,
Tomasz Stanislawski
Tomasz Stanislawski (12):
clk: propagate parent change up one level
clk: exynos4: export sclk_hdmiphy clock
clk: exynos4: enable clk_set_parent() propagation for sclk_hdmi and
sclk_mixer clocks
phy: Add simple-phy driver
phy: use of_phy_simple_xlate for NULL xlate function
Revert "drm/exynos: add mout_hdmi clock in hdmi driver to change
parent"
drm: exynos: hdmi: use hdmiphy as PHY
drm: exynos: hdmi: simplify extracting hpd-gpio from DT
drm: exynos: add compatibles for HDMI and Mixer chips and exynos4210
SoC
arm: dts: exynos4: add i2c controller for HDMIPHY
arm: dts: exynos4: add HDMI devices
arm: dts: universal_c210: add HDMI devices
.../devicetree/bindings/clock/exynos4-clock.txt | 1 +
arch/arm/boot/dts/exynos4.dtsi | 43 +++++++
arch/arm/boot/dts/exynos4210-universal_c210.dts | 53 ++++++++
arch/arm/boot/dts/exynos4210.dtsi | 4 +
drivers/clk/clk.c | 6 +
drivers/clk/samsung/clk-exynos4.c | 10 +-
drivers/gpu/drm/exynos/exynos_hdmi.c | 41 +++----
drivers/gpu/drm/exynos/exynos_mixer.c | 3 +
drivers/phy/Kconfig | 5 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-core.c | 2 +-
drivers/phy/phy-simple.c | 128 ++++++++++++++++++++
include/linux/clk-provider.h | 1 +
13 files changed, 269 insertions(+), 29 deletions(-)
create mode 100644 drivers/phy/phy-simple.c
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists