[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1382332189-5596-1-git-send-email-michael.opdenacker@free-electrons.com>
Date: Mon, 21 Oct 2013 07:09:49 +0200
From: Michael Opdenacker <michael.opdenacker@...e-electrons.com>
To: divy@...lsio.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Michael Opdenacker <michael.opdenacker@...e-electrons.com>
Subject: [PATCH v2] chelsio: remove duplicate defines
This removes multiple duplicate definitions
in drivers/net/ethernet/chelsio/cxgb3/regs.h
Signed-off-by: Michael Opdenacker <michael.opdenacker@...e-electrons.com>
---
drivers/net/ethernet/chelsio/cxgb3/regs.h | 35 -------------------------------
1 file changed, 35 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb3/regs.h b/drivers/net/ethernet/chelsio/cxgb3/regs.h
index 6990f6c..81029b8 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb3/regs.h
@@ -685,10 +685,6 @@
#define V_BUSY(x) ((x) << S_BUSY)
#define F_BUSY V_BUSY(1U)
-#define S_BUSY 31
-#define V_BUSY(x) ((x) << S_BUSY)
-#define F_BUSY V_BUSY(1U)
-
#define A_MC7_EXT_MODE1 0x108
#define A_MC7_EXT_MODE2 0x10c
@@ -749,14 +745,6 @@
#define A_MC7_CAL 0x128
-#define S_BUSY 31
-#define V_BUSY(x) ((x) << S_BUSY)
-#define F_BUSY V_BUSY(1U)
-
-#define S_BUSY 31
-#define V_BUSY(x) ((x) << S_BUSY)
-#define F_BUSY V_BUSY(1U)
-
#define S_CAL_FAULT 30
#define V_CAL_FAULT(x) ((x) << S_CAL_FAULT)
#define F_CAL_FAULT V_CAL_FAULT(1U)
@@ -815,9 +803,6 @@
#define V_OP(x) ((x) << S_OP)
#define F_OP V_OP(1U)
-#define F_OP V_OP(1U)
-#define A_SF_OP 0x6dc
-
#define A_MC7_BIST_ADDR_BEG 0x168
#define A_MC7_BIST_ADDR_END 0x16c
@@ -830,8 +815,6 @@
#define V_CONT(x) ((x) << S_CONT)
#define F_CONT V_CONT(1U)
-#define F_CONT V_CONT(1U)
-
#define A_MC7_INT_ENABLE 0x178
#define S_AE 17
@@ -1017,8 +1000,6 @@
#define V_NICMODE(x) ((x) << S_NICMODE)
#define F_NICMODE V_NICMODE(1U)
-#define F_NICMODE V_NICMODE(1U)
-
#define S_IPV6ENABLE 15
#define V_IPV6ENABLE(x) ((x) << S_IPV6ENABLE)
#define F_IPV6ENABLE V_IPV6ENABLE(1U)
@@ -1562,27 +1543,15 @@
#define A_ULPRX_STAG_ULIMIT 0x530
#define A_ULPRX_RQ_LLIMIT 0x534
-#define A_ULPRX_RQ_LLIMIT 0x534
#define A_ULPRX_RQ_ULIMIT 0x538
-#define A_ULPRX_RQ_ULIMIT 0x538
#define A_ULPRX_PBL_LLIMIT 0x53c
#define A_ULPRX_PBL_ULIMIT 0x540
-#define A_ULPRX_PBL_ULIMIT 0x540
#define A_ULPRX_TDDP_TAGMASK 0x524
-#define A_ULPRX_RQ_LLIMIT 0x534
-#define A_ULPRX_RQ_LLIMIT 0x534
-
-#define A_ULPRX_RQ_ULIMIT 0x538
-#define A_ULPRX_RQ_ULIMIT 0x538
-
-#define A_ULPRX_PBL_ULIMIT 0x540
-#define A_ULPRX_PBL_ULIMIT 0x540
-
#define A_ULPTX_CONFIG 0x580
#define S_CFG_CQE_SOP_MASK 1
@@ -2053,8 +2022,6 @@
#define V_TMMODE(x) ((x) << S_TMMODE)
#define F_TMMODE V_TMMODE(1U)
-#define F_TMMODE V_TMMODE(1U)
-
#define A_MC5_DB_ROUTING_TABLE_INDEX 0x70c
#define A_MC5_DB_FILTER_TABLE 0x710
@@ -2454,8 +2421,6 @@
#define V_TXACTENABLE(x) ((x) << S_TXACTENABLE)
#define F_TXACTENABLE V_TXACTENABLE(1U)
-#define A_XGM_SERDES_CTRL0 0x8e0
-
#define S_RESET3 23
#define V_RESET3(x) ((x) << S_RESET3)
#define F_RESET3 V_RESET3(1U)
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists