| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20131023072738.GI2839@S2101-09.ap.freescale.net>
Date: Wed, 23 Oct 2013 15:27:40 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: Rostislav Lisovy <lisovy@...il.com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Sascha Hauer <kernel@...gutronix.de>, <pisa@....felk.cvut.cz>
Subject: Re: [PATCH 3/4] ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
On Tue, Oct 22, 2013 at 07:07:22PM +0200, Rostislav Lisovy wrote:
> Enable UART1 and FEC
You have more than these two enabled.
>
> Signed-off-by: Rostislav Lisovy <lisovy@...il.com>
>
> create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
>
> diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
> new file mode 100644
> index 0000000..04695c9
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
> @@ -0,0 +1,195 @@
> +/*
> + * Copyright 2013 Rostislav Lisovy <lisovy@...il.com>, PiKRON s.r.o.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include "imx53.dtsi"
> +
> +/ {
> + model = "Voipac i.MX53 X53-DMM-668";
> + compatible = "vp,imx53-dmm-668", "fsl,imx53";
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x70000000 0x20000000>;
> + };
> +
> + memory@1 {
> + device_type = "memory";
> + reg = <0xb0000000 0x20000000>;
> + };
The 'num' in memory@num should match the first number in 'reg' property,
so they should looks like:
memory@...00000 {
device_type = "memory";
reg = <0x70000000 0x20000000>;
}
memory@...00000 {
device_type = "memory";
reg = <0xb0000000 0x20000000>;
}
> +
> + regulators {
> + compatible = "simple-bus";
> +
> + reg_3p3v: 3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + hog {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* Make DA9053 regulator functional */
> + MX53_PAD_GPIO_16__GPIO7_11 0x80000000
> +
Drop these blank lines. We generally only have blank lines between
nodes.
> + /* FEC Power enable */
> + MX53_PAD_GPIO_11__GPIO4_1 0x80000000
> +
> + /* FEC RST */
> + MX53_PAD_GPIO_12__GPIO4_2 0x80000000
> + >;
> + };
> + };
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1_2>;
> + status = "okay";
> +};
> +
> +&i2c1 {
Please sort these nodes alphabetically in label name, so that new node
can find they slots easily.
Shawn
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1_2>;
> + status = "okay";
> +
> + pmic: dialog@48 {
> + compatible = "dlg,da9053-aa", "dlg,da9052";
> + reg = <0x48>;
> + interrupt-parent = <&gpio7>;
> + interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
> +
> + regulators {
> + buck1_reg: buck1 {
> + regulator-name = "BUCKCORE";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + };
> +
> + buck2_reg: buck2 {
> + regulator-name = "BUCKPRO";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + buck3_reg: buck3 {
> + regulator-name = "BUCKMEM";
> + regulator-min-microvolt = <1420000>;
> + regulator-max-microvolt = <1580000>;
> + regulator-always-on;
> + };
> +
> + buck4_reg: buck4 {
> + regulator-name = "BUCKPERI";
> + regulator-min-microvolt = <2370000>;
> + regulator-max-microvolt = <2630000>;
> + regulator-always-on;
> + };
> +
> + ldo1_reg: ldo1 {
> + regulator-name = "ldo1_1v3";
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: ldo2 {
> + regulator-name = "ldo2_1v3";
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: ldo3 {
> + regulator-name = "ldo3_3v3";
> + regulator-min-microvolt = <3250000>;
> + regulator-max-microvolt = <3350000>;
> + regulator-always-on;
> + };
> +
> + ldo4_reg: ldo4 {
> + regulator-name = "ldo4_2v775";
> + regulator-min-microvolt = <2770000>;
> + regulator-max-microvolt = <2780000>;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: ldo5 {
> + regulator-name = "ldo5_3v3";
> + regulator-min-microvolt = <3250000>;
> + regulator-max-microvolt = <3350000>;
> + regulator-always-on;
> + };
> +
> + ldo6_reg: ldo6 {
> + regulator-name = "ldo6_1v3";
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: ldo7 {
> + regulator-name = "ldo7_2v75";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: ldo8 {
> + regulator-name = "ldo8_1v8";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <1850000>;
> + regulator-always-on;
> + };
> +
> + ldo9_reg: ldo9 {
> + regulator-name = "ldo9_1v5";
> + regulator-min-microvolt = <1450000>;
> + regulator-max-microvolt = <1550000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: ldo10 {
> + regulator-name = "ldo10_1v3";
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&ecspi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1_1>;
> + fsl,spi-num-chipselects = <4>;
> + cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
> + status = "okay";
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec_1>;
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpio4 2 0>;
> + status = "okay";
> +};
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists