| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <52694238.7050607@ti.com>
Date: Thu, 24 Oct 2013 21:22:24 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Tomasz Stanislawski <t.stanislaws@...sung.com>
CC: <devicetree@...r.kernel.org>, <linux-samsung-soc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <dri-devel@...ts.freedesktop.org>,
<kyungmin.park@...sung.com>, <t.figa@...sung.com>,
<sw0312.kim@...sung.com>, <inki.dae@...sung.com>,
<rahul.sharma@...sung.com>, <kgene.kim@...sung.com>,
<s.nawrocki@...sung.com>, <thomas.abraham@...aro.org>,
<mturquette@...aro.org>
Subject: Re: [RFC 04/12] phy: Add simple-phy driver
Hi,
On Monday 21 October 2013 07:48 PM, Tomasz Stanislawski wrote:
> Add simple-phy driver to support a single register
> PHY interfaces present on Exynos4 SoC.
How are these PHY interfaces modelled in the SoC? Where does the register
actually reside?
>
> Signed-off-by: Tomasz Stanislawski <t.stanislaws@...sung.com>
> ---
> drivers/phy/Kconfig | 5 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-simple.c | 128 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 134 insertions(+)
> create mode 100644 drivers/phy/phy-simple.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index ac239ac..619c657 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -38,4 +38,9 @@ config TWL4030_USB
> This transceiver supports high and full speed devices plus,
> in host mode, low speed.
>
> +config PHY_SIMPLE
> + tristate "Simple PHY driver"
This is too generic a name to be used. Lets name it something specific to what
it is used for (EXYNOS/HDMI.. ?).
> + help
> + Support for PHY controllers configured using single register.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 0dd8a98..3d68e19 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -5,3 +5,4 @@
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> +obj-$(CONFIG_PHY_SIMPLE) += phy-simple.o
> diff --git a/drivers/phy/phy-simple.c b/drivers/phy/phy-simple.c
> new file mode 100644
> index 0000000..4a28af7
> --- /dev/null
> +++ b/drivers/phy/phy-simple.c
> @@ -0,0 +1,128 @@
> +/*
> + * Simple PHY driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Tomasz Stanislawski <t.stanislaws@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +
> +struct simple_phy {
> + spinlock_t slock;
> + u32 on_value;
> + u32 off_value;
> + u32 mask;
> + void __iomem *regs;
> +};
> +
> +static int sphy_set(struct simple_phy *sphy, bool on)
> +{
> + u32 reg;
> +
> + spin_lock(&sphy->slock);
Lets add spin_lock only when it is absolutely necessary. When your PHY provider
implements only a single PHY, it is not needed. phy_power_on and phy_power_off
is already protected by the framework.
> +
> + reg = readl(sphy->regs);
> + reg &= ~sphy->mask;
> + reg |= sphy->mask & (on ? sphy->on_value : sphy->off_value);
> + writel(reg, sphy->regs);
> +
> + spin_unlock(&sphy->slock);
> +
> + return 0;
> +}
> +
> +static int simple_phy_power_on(struct phy *phy)
> +{
> + return sphy_set(phy_get_drvdata(phy), 1);
> +}
> +
> +static int simple_phy_power_off(struct phy *phy)
> +{
> + return sphy_set(phy_get_drvdata(phy), 0);
> +}
> +
> +static struct phy_ops simple_phy_ops = {
> + .power_on = simple_phy_power_on,
> + .power_off = simple_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int simple_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct simple_phy *sphy;
> + struct resource *res;
> + struct phy_provider *phy_provider;
> + struct phy *phy;
> +
> + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
> + if (!sphy)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + sphy->regs = devm_ioremap_resource(dev, res);
> + if (IS_ERR(sphy->regs)) {
> + dev_err(dev, "failed to ioremap registers\n");
> + return PTR_ERR(sphy->regs);
> + }
> +
> + spin_lock_init(&sphy->slock);
> +
> + phy_provider = devm_of_phy_provider_register(dev, NULL);
pass 'of_phy_simple_xlate' instead of NULL.
> + if (IS_ERR(phy_provider)) {
> + dev_err(dev, "failed to register PHY provider\n");
> + return PTR_ERR(phy_provider);
> + }
> +
> + phy = devm_phy_create(dev, &simple_phy_ops, NULL);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(phy);
> + }
> +
> + sphy->mask = 1;
> + sphy->on_value = ~0;
> + sphy->off_value = 0;
> +
> + of_property_read_u32(dev->of_node, "mask", &sphy->mask);
This means your driver will depend on dt data to describe how the register
should look like. Not a good idea.
> + of_property_read_u32(dev->of_node, "on-value", &sphy->on_value);
> + of_property_read_u32(dev->of_node, "off-value", &sphy->off_value);
> +
> + phy_set_drvdata(phy, sphy);
> +
> + dev_info(dev, "probe successful\n");
Lets not make the boot noisy.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists