| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1382710529-12082-4-git-send-email-k.debski@samsung.com>
Date: Fri, 25 Oct 2013 16:15:27 +0200
From: Kamil Debski <k.debski@...sung.com>
To: linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm@...r.kernel.org
Cc: kyungmin.park@...sung.com, kishon@...com, t.figa@...sung.com,
s.nawrocki@...sung.com, m.szyprowski@...sung.com,
gautam.vivek@...sung.com, mat.krawczuk@...il.com,
Mateusz Krawczuk <m.krawczuk@...tner.samsung.com>,
Kamil Debski <k.debski@...sung.com>
Subject: [PATCH 3/5] phy: Add support for S5PV210 to the Exynos USB PHY driver
From: Mateusz Krawczuk <m.krawczuk@...tner.samsung.com>
Add support for the Samsung's S5PV210 SoC to the Exynos USB PHY driver.
Signed-off-by: Mateusz Krawczuk <m.krawczuk@...tner.samsung.com>
[k.debski@...sung.com: whitespace cleanup and commit description]
Signed-off-by: Kamil Debski <k.debski@...sung.com>
---
drivers/phy/Kconfig | 7 ++
drivers/phy/phy-exynos-usb.c | 10 ++
drivers/phy/phy-exynos-usb.h | 1 +
drivers/phy/phy-s5pv210-usb.c | 236 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 254 insertions(+)
create mode 100644 drivers/phy/phy-s5pv210-usb.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 0f598d0..d3517f9 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -22,6 +22,13 @@ config PHY_EXYNOS_USB
This driver provides common interface to interact, for Samsung
USB 2.0 PHY driver.
+config PHY_S5PV210_USB
+ bool "Support for S5PV210"
+ depends on PHY_EXYNOS_USB
+ depends on ARCH_S5PV210
+ help
+ Enable USB PHY support for S5PV210
+
config PHY_EXYNOS4210_USB
bool "Support for Exynos 4210"
depends on PHY_EXYNOS_USB
diff --git a/drivers/phy/phy-exynos-usb.c b/drivers/phy/phy-exynos-usb.c
index 172b774..01fb12a 100644
--- a/drivers/phy/phy-exynos-usb.c
+++ b/drivers/phy/phy-exynos-usb.c
@@ -216,7 +216,17 @@ extern const struct uphy_config exynos4212_uphy_config;
extern const struct uphy_config exynos5250_uphy_config;
#endif
+#ifdef CONFIG_PHY_S5PV210_USB
+extern const struct uphy_config s5pv210_uphy_config;
+#endif
+
static const struct of_device_id exynos_uphy_of_match[] = {
+#ifdef CONFIG_PHY_S5PV210_USB
+ {
+ .compatible = "samsung,s5pv210-usbphy",
+ .data = &s5pv210_uphy_config,
+ },
+#endif
#ifdef CONFIG_PHY_EXYNOS4210_USB
{
.compatible = "samsung,exynos4210-usbphy",
diff --git a/drivers/phy/phy-exynos-usb.h b/drivers/phy/phy-exynos-usb.h
index a9febfa..0f385ca 100644
--- a/drivers/phy/phy-exynos-usb.h
+++ b/drivers/phy/phy-exynos-usb.h
@@ -40,6 +40,7 @@ enum phy_type {
enum samsung_cpu_type {
TYPE_S3C64XX,
+ TYPE_S5PV210,
TYPE_EXYNOS4210,
TYPE_EXYNOS4212,
TYPE_EXYNOS5250,
diff --git a/drivers/phy/phy-s5pv210-usb.c b/drivers/phy/phy-s5pv210-usb.c
new file mode 100644
index 0000000..575275d
--- /dev/null
+++ b/drivers/phy/phy-s5pv210-usb.c
@@ -0,0 +1,236 @@
+/*
+ * Samsung S5P/EXYNOS SoC series USB PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Authors: Kamil Debski <k.debski@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include "phy-exynos-usb.h"
+
+/* Exynos USB PHY registers */
+
+/* PHY power control */
+#define S5PV210_UPHYPWR 0x0
+
+#define S5PV210_UPHYPWR_PHY0_SUSPEND (1 << 0)
+#define S5PV210_UPHYPWR_PHY0_PWR (1 << 3)
+#define S5PV210_UPHYPWR_PHY0_OTG_PWR (1 << 4)
+#define S5PV210_UPHYPWR_PHY0 ( \
+ S5PV210_UPHYPWR_PHY0_SUSPEND | \
+ S5PV210_UPHYPWR_PHY0_PWR | \
+ S5PV210_UPHYPWR_PHY0_OTG_PWR)
+
+#define S5PV210_UPHYPWR_PHY1_SUSPEND (1 << 6)
+#define S5PV210_UPHYPWR_PHY1_PWR (1 << 7)
+#define S5PV210_UPHYPWR_PHY1 ( \
+ S5PV210_UPHYPWR_PHY1_SUSPEND | \
+ S5PV210_UPHYPWR_PHY1_PWR)
+
+/* PHY clock control */
+#define S5PV210_UPHYCLK 0x4
+
+#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
+#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
+#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
+#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
+
+#define S5PV210_UPHYCLK_PHY0_ID_PULLUP (0x1 << 2)
+#define S5PV210_UPHYCLK_PHY0_COMMON_ON (0x1 << 4)
+#define S5PV210_UPHYCLK_PHY1_COMMON_ON (0x1 << 7)
+
+/* PHY reset control */
+#define S5PV210_UPHYRST 0x8
+
+#define S5PV210_URSTCON_PHY0 (1 << 0)
+#define S5PV210_URSTCON_OTG_HLINK (1 << 1)
+#define S5PV210_URSTCON_OTG_PHYLINK (1 << 2)
+#define S5PV210_URSTCON_PHY1_ALL (1 << 3)
+#define S5PV210_URSTCON_HOST_LINK_ALL (1 << 4)
+
+/* Isolation, configured in the power management unit */
+#define S5PV210_USB_ISOL_DEVICE_OFFSET 0x0
+#define S5PV210_USB_ISOL_DEVICE (1 << 0)
+#define S5PV210_USB_ISOL_HOST_OFFSET 0x4
+#define S5PV210_USB_ISOL_HOST (1 << 1)
+
+
+enum s5pv210_phy_id {
+ S5PV210_DEVICE,
+ S5PV210_HOST,
+ S5PV210_NUM_PHYS,
+};
+
+/* s5pv210_rate_to_clk() converts the supplied clock rate to the value that
+ * can be written to the phy register. */
+static u32 s5pv210_rate_to_clk(unsigned long rate)
+{
+ unsigned int clksel;
+
+ pr_info("%lu \n",rate);
+ switch (rate) {
+ case 12 * MHZ:
+ clksel = S5PV210_UPHYCLK_PHYFSEL_12MHZ;
+ break;
+ case 24 * MHZ:
+ clksel = S5PV210_UPHYCLK_PHYFSEL_24MHZ;
+ break;
+ case 48 * MHZ:
+ clksel = S5PV210_UPHYCLK_PHYFSEL_48MHZ;
+ break;
+ default:
+ clksel = CLKSEL_ERROR;
+ }
+
+ return clksel;
+}
+
+static void s5pv210_isol(struct uphy_instance *inst, bool on)
+{
+ struct uphy_driver *drv = inst->drv;
+ u32 mask;
+ u32 tmp;
+
+ if (!drv->reg_isol)
+ return;
+
+ switch (inst->cfg->id) {
+ case S5PV210_DEVICE:
+ mask = S5PV210_USB_ISOL_DEVICE;
+ break;
+ case S5PV210_HOST:
+ mask = S5PV210_USB_ISOL_HOST;
+ break;
+ default:
+ return;
+ };
+
+ tmp = readl(drv->reg_isol);
+ if (on)
+ tmp &= ~mask;
+ else
+ tmp |= mask;
+ writel(tmp, drv->reg_isol);
+}
+
+static void s5pv210_phy_pwr(struct uphy_instance *inst, bool on)
+{
+ struct uphy_driver *drv = inst->drv;
+ u32 rstbits = 0;
+ u32 phypwr = 0;
+ u32 rst;
+ u32 pwr;
+
+ switch (inst->cfg->id) {
+ case S5PV210_DEVICE:
+ phypwr = S5PV210_UPHYPWR_PHY0;
+ rstbits = S5PV210_URSTCON_PHY0;
+ break;
+ case S5PV210_HOST:
+ phypwr = S5PV210_UPHYPWR_PHY1;
+ rstbits = S5PV210_URSTCON_PHY1_ALL |
+ S5PV210_URSTCON_HOST_LINK_ALL;
+ break;
+ };
+
+ if (on) {
+ writel(inst->clk, drv->reg_phy + S5PV210_UPHYCLK);
+
+ pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
+ pwr &= ~phypwr;
+ writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
+
+ rst = readl(drv->reg_phy + S5PV210_UPHYRST);
+ rst |= rstbits;
+ writel(rst, drv->reg_phy + S5PV210_UPHYRST);
+ udelay(10);
+ rst &= ~rstbits;
+ writel(rst, drv->reg_phy + S5PV210_UPHYRST);
+ } else {
+ pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
+ pwr |= phypwr;
+ writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
+ }
+}
+
+static int s5pv210_power_on(struct uphy_instance *inst)
+{
+ struct uphy_driver *drv = inst->drv;
+
+ if (inst->state == STATE_ON) {
+ dev_err(drv->dev, "usb phy \"%s\" already on",
+ inst->cfg->label);
+ return -ENODEV;
+ }
+ inst->state = STATE_ON;
+ inst->ref_cnt++;
+ if (inst->ref_cnt > 1)
+ return 0;
+
+ s5pv210_isol(inst, 0);
+ s5pv210_phy_pwr(inst, 1);
+
+ return 0;
+}
+
+static int s5pv210_power_off(struct uphy_instance *inst)
+{
+ struct uphy_driver *drv = inst->drv;
+
+ if (inst->state == STATE_OFF) {
+ dev_err(drv->dev, "usb phy \"%s\" already off",
+ inst->cfg->label);
+ return -EINVAL;
+ }
+
+ inst->state = STATE_OFF;
+ inst->ref_cnt++;
+ if (inst->ref_cnt > 0)
+ return 0;
+
+ s5pv210_phy_pwr(inst, 0);
+ s5pv210_isol(inst, 1);
+
+ return 0;
+}
+
+
+static const struct common_phy s5pv210_phys[] = {
+ {
+ .label = "device",
+ .type = PHY_DEVICE,
+ .id = S5PV210_DEVICE,
+ .rate_to_clk = s5pv210_rate_to_clk,
+ .power_on = s5pv210_power_on,
+ .power_off = s5pv210_power_off,
+ },
+ {
+ .label = "host",
+ .type = PHY_HOST,
+ .id = S5PV210_HOST,
+ .rate_to_clk = s5pv210_rate_to_clk,
+ .power_on = s5pv210_power_on,
+ .power_off = s5pv210_power_off,
+ },
+ {},
+};
+
+const struct uphy_config s5pv210_uphy_config = {
+ .cpu = TYPE_S5PV210,
+ .num_phys = S5PV210_NUM_PHYS,
+ .phys = s5pv210_phys,
+};
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists