[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20131025224841.GB1157@teo>
Date: Fri, 25 Oct 2013 15:48:41 -0700
From: Anton Vorontsov <anton.vorontsov@...aro.org>
To: Stephen Warren <swarren@...dotorg.org>
Cc: Rhyland Klein <rklein@...dia.com>,
David Woodhouse <dwmw2@...radead.org>,
Thierry Reding <thierry.reding@...il.com>,
Darbha Sriharsha <dsriharsha@...dia.com>,
Manish Badarkha <badarkhe.manish@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Mark Rutland <Mark.Rutland@....com>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Subject: Re: [Patch V5] drivers: power: Add support for bq24735 charger
On Mon, Oct 14, 2013 at 12:40:26PM -0600, Stephen Warren wrote:
> >>> diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
> >>
> >>> +Optional properties :
> >>
> >>> + - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
> >>> + presence.
> >>
> >> Is that actually a property of the BQ24735 chip itself (i.e. is it an
> >> output signal from the chip), or part of the board/system?
> >
> > The gpio itself is actually what the IRQ line is tied to from the
> > bq24735 -> tegra (in this case). In other words this is a Host GPIO that
> > is configured as an input and connected to the bq24735.
>
> Ok, so this is the ACOK output pin? In that case, it's fine. It might be
> worth mentioning that explicitly though.
I added the comment to the documentation and applied the patch with a
"Thanks-to: Stephen Warren <swarren@...dotorg.org>" tag. :)
Anton
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists