| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20131027134829.3F1C7C4039D@trevor.secretlab.ca>
Date: Sun, 27 Oct 2013 13:48:29 +0000
From: Grant Likely <grant.likely@...retlab.ca>
To: Wendy Ng <wendy.ng@...adcom.com>,
Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Eduardo Valentin <eduardo.valentin@...com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, Christian Daudt <bcm@...thebug.org>,
Markus Mayer <mmayer@...adcom.com>,
Tim Kryger <tim.kryger@...aro.org>,
Matt Porter <matt.porter@...aro.org>,
Wendy Ng <wendy.ng@...adcom.com>
Subject: Re: [PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver
On Fri, 25 Oct 2013 17:00:27 -0700, "Wendy Ng" <wendy.ng@...adcom.com> wrote:
> This adds the support for Temperature Monitor (TMON) driver for
> Broadcom bcm281xx SoCs. This driver plugs into the Thermal Framework.
>
> Note that this version of the TMON driver does support interrupt-driven
> mode -- only polling-mode of the thermal framework can be used.
>
> Signed-off-by: Wendy Ng <wendy.ng@...adcom.com>
> Reviewed-by: Markus Mayer <mmayer@...adcom.com>
> Reviewed-by: Christian Daudt <csd@...adcom.com>
> Reviewed-by: Matt Porter <matt.porter@...aro.org>
> Reviewed-by: Tim Kryger <tim.kryger@...aro.org>
> ---
> .../bindings/thermal/bcm-kona-thermal.txt | 24 +++
> drivers/thermal/Kconfig | 11 ++
> drivers/thermal/Makefile | 1 +
> drivers/thermal/bcm_kona_tmon.c | 173 ++++++++++++++++++++
> 4 files changed, 209 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> create mode 100644 drivers/thermal/bcm_kona_tmon.c
>
> diff --git a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> new file mode 100644
> index 0000000..225b898
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> @@ -0,0 +1,24 @@
> +* Broadcom Kona TMON bindings
> +
> +This version is for the Kona family of SoCs. The TMON (Temperature Monitor)
> +block in a Kona SoC device is used to measure the chip temperature at constant
> +intervals.
> +The TMON block asserts an interrupt if temperature exceeds a user programmed
> +threshold value. The TMON block would reset the entire device once it
> +reaches a critical temperature which is also a programmable setting.
> +
> +Required properties:
> +- compatible : "brcm,bcm11351-tmon", "brcm,kona-tmon"
> +- reg : Address range of the thermal register
> +- clocks : the clock signal that drives the TMON block
> +- interrupts: the interrupt signal associated with the TMON block
> +
> +
> +Example:
> + tmon@...08000 {
> + compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
> + reg = <0x34008000 0x0024>;
> + clocks = <&tmon_1m_clk>;
> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
I would drop the status="disabled" from the example, but otherwise the
binding looks fine.
g.
> + };
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 9e7cc3f..02200ad 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -166,6 +166,17 @@ config DB8500_THERMAL
> created. Cooling devices can be bound to the trip points to cool this
> thermal zone if trip points reached.
>
> +config BCM_KONA_TMON_THERMAL
> + tristate "Temperature Monitor driver on Broadcom Kona family of SoCs"
> + depends on ARCH_BCM_MOBILE
> + depends on THERMAL_OF
> + default y
> + help
> + If you say yes here you get support for the TMON
> + (Temperature Monitor) in Broadcom Kona family of SoCs.
> + This also provides the generic support of the Thermal Framework
> + for Broadcom Kona family of SoCs.
> +
> config ARMADA_THERMAL
> tristate "Armada 370/XP thermal management"
> depends on ARCH_MVEBU
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 4b03956..5e85354 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
> obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
> obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o
> obj-y += samsung/
> +obj-$(CONFIG_BCM_KONA_TMON_THERMAL) += bcm_kona_tmon.o
> obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
> obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
> obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> diff --git a/drivers/thermal/bcm_kona_tmon.c b/drivers/thermal/bcm_kona_tmon.c
> new file mode 100644
> index 0000000..69ae0b2
> --- /dev/null
> +++ b/drivers/thermal/bcm_kona_tmon.c
> @@ -0,0 +1,173 @@
> +/*
> + * Copyright 2013 Broadcom Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2,
> + * as published by the Free Software Foundation (the "GPL").
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php,
> + * or by writing to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + */
> +
> +/**
> +* Broadcom Kona Temperature Monitor (TMON) driver
> +*
> +* Note: The TMON hardware monitors a single sensor.
> +*/
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +
> +/* From TMON Register Database */
> +#define TMON_TEMP_VAL_OFFSET 0x0000001c
> +#define TMON_TEMP_VAL_TEMP_VAL_SHIFT 0
> +#define TMON_TEMP_VAL_TEMP_VAL_MASK 0x000003ff
> +
> +/* Broadcom TMON Private Data Structure */
> +struct bcm_tmon_data_priv {
> + void __iomem *base;
> + struct clk *external_clk;
> + struct thermal_zone_device *therm_dev;
> +};
> +
> +/* Temperature conversion function for TMON block */
> +static long raw_to_mcelsius(u32 raw)
> +{
> + /*
> + * According to Broadcom internal Analog Module Specification
> + * the formula for converting TMON block output to temperature in
> + * degree Celsius is:
> + * T = 428 - (0.561 * raw)
> + * Note: the valid operating range for the TMON block is -40C to 125C
> + */
> + return 428000 - (561 * (long)raw);
> +}
> +
> +/* Get temperature callback function for thermal zone */
> +static int bcm_get_temp(void *sensor_data, long *temp)
> +{
> + u32 raw;
> + long mcelsius;
> + struct bcm_tmon_data_priv *priv = sensor_data;
> +
> + if (!priv) {
> + pr_err("%s: input sensor_data not initialized.\n", __func__);
> + return -EINVAL;
> + }
> +
> + raw = (readl(priv->base + TMON_TEMP_VAL_OFFSET)
> + & TMON_TEMP_VAL_TEMP_VAL_MASK) >> TMON_TEMP_VAL_TEMP_VAL_SHIFT;
> +
> + pr_debug("%s: raw temp 0x%x\n", __func__, raw);
> +
> + mcelsius = raw_to_mcelsius(raw);
> +
> + /*
> + * Since 'mcelsius' might be negative, we need to limit it to smallest
> + * unsigned value before returning it to thermal framework.
> + */
> + if (mcelsius < 0)
> + *temp = 0;
> + else
> + *temp = mcelsius;
> +
> + pr_debug("%s: final temp %d\n", __func__, (int) *temp);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id bcm_kona_tmon_match_table[] = {
> + { .compatible = "brcm,kona-tmon" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, bcm_kona_tmon_match_table);
> +
> +static int bcm_kona_tmon_probe(struct platform_device *pdev)
> +{
> + struct thermal_zone_device *thermal = NULL;
> + struct bcm_tmon_data_priv *priv;
> + struct resource *res;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv) {
> + dev_err(&pdev->dev, "Failed to malloc priv.\n");
> + return -ENOMEM;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->external_clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(priv->external_clk))
> + return -ENODEV;
> +
> + if (clk_prepare_enable(priv->external_clk) != 0)
> + return -EINVAL;
> +
> + /*
> + * Note that get_trend() function is NULL. This is OK for now as
> + * we can rely on the get_tz_trend() from the Thermal Framework until
> + * we come up with a better way to determine the trend.
> + */
> + thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
> + bcm_get_temp, NULL);
> +
> + if (IS_ERR(thermal)) {
> + dev_err(&pdev->dev, "Failed to register BCM Kona TMON.\n");
> + clk_disable_unprepare(priv->external_clk);
> + return PTR_ERR(thermal);
> + }
> +
> + priv->therm_dev = thermal;
> +
> + platform_set_drvdata(pdev, priv);
> +
> + dev_info(&pdev->dev, "BCM Kona TMON Initialized.\n");
> +
> + return 0;
> +}
> +
> +static int bcm_kona_tmon_remove(struct platform_device *pdev)
> +{
> + struct bcm_tmon_data_priv *priv = platform_get_drvdata(pdev);
> +
> + thermal_zone_of_sensor_unregister(&pdev->dev, priv->therm_dev);
> +
> + clk_disable_unprepare(priv->external_clk);
> +
> + dev_info(&pdev->dev, "BCM Kona TMON Uninitialized.\n");
> +
> + return 0;
> +}
> +
> +static struct platform_driver bcm_kona_tmon_driver = {
> + .driver = {
> + .name = "bcm-kona-tmon",
> + .owner = THIS_MODULE,
> + .of_match_table = bcm_kona_tmon_match_table,
> + },
> + .probe = bcm_kona_tmon_probe,
> + .remove = bcm_kona_tmon_remove,
> +};
> +
> +module_platform_driver(bcm_kona_tmon_driver);
> +
> +MODULE_DESCRIPTION("Broadcom Kona Temperature Monitor Driver");
> +MODULE_AUTHOR("Broadcom Corporation");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:bcm-kona-tmon");
> --
> 1.7.9.5
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists