[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20131029075028.GF19704@spo001.leaseweb.com>
Date: Tue, 29 Oct 2013 08:50:28 +0100
From: Wim Van Sebroeck <wim@...ana.be>
To: Boris BREZILLON <b.brezillon@...rkiz.com>
Cc: Rob Herring <rob.herring@...xeda.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Stephen Warren <swarren@...dotorg.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Landley <rob@...dley.net>,
Russell King <linux@....linux.org.uk>,
Fabio Porcedda <fabio.porcedda@...il.com>,
Nicolas Ferre <nicolas.ferre@...el.com>,
Guenter Roeck <groeck7@...il.com>,
Yang Wenyou <wenyou.yang@...el.com>,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-watchdog@...r.kernel.org
Subject: Re: [PATCH v5 0/4] watchdog: at91sam9_wdt: handle already configured wdt
Hi Boris,
> Hello,
>
> This patch series is a porposal to enhance the sam9 watchdog timer support.
>
> The at91sam9 watchdog timer can only be configured once, and the current
> implementation tries to configure it in a static way:
> - 2 seconds timeout
> - wdt restart every 500ms
>
> If the timer has already been configured with different values, it returns an
> error and do not create any watchdog device.
>
> This is not critical if the watchdog is disabled, but if it has been enabled
> with different timeout values it will lead to a SoC reset.
>
> This patch series tries to address this issue by adapting the heartbeat value
> according the WDT timer config:
> - it first tries to configure the timer as requested.
> - if it fails it fallbacks to the current config, adapting its heartbeat timer
> to the needs
>
> This patch series also move to a dynamically allocated at91wdt device instead
> of the static instance. I'm not sure this is the best solution, so please tell
> me if you prefer to keep static instance of watchdog.
>
> It adds a new at91 wdt type: software. This new type make use of the at91 wdt
> interrupt to trigger a software reboot.
>
> Finally it adds several properties to the device tree bindings.
>
> Best Regards,
> Boris
>
> Changes since v4:
> - fix coding style issues
> - remove unneeded watchdog_active test
>
> Changes since v3:
> - fix a bug in heartbeat time computation
> - fix a bug in at91_wdt_set_timeout when new timeout is bigger than the old
> one
> - rename at91_wdt_ping into at91_wdt_start
> - remove unneeded ping callback assignment
>
> Changes since v2:
> - fix documentation
> - rework the heartbeat computation to get a more flexible behaviour
> - fix xx_to_yy macros
> - modify warning and error messages
> - remove unneeded parenthesis in arithmetic operations
> - use devm functions to map io memory
> - remove unneeded devm_kfree calls
>
> Change since v1:
> - fix typo in documentaion
> - fix irq dt definition for sama5d3 SoC
>
>
> Boris BREZILLON (4):
> watchdog: at91sam9_wdt: better watchdog support
> watchdog: at91sam9_wdt: update device tree doc
> ARM: at91/dt: add sam9 watchdog default options to SoCs
> ARM: at91/dt: add watchdog properties to kizbox board
>
> .../devicetree/bindings/watchdog/atmel-wdt.txt | 30 +-
> arch/arm/boot/dts/at91sam9260.dtsi | 5 +
> arch/arm/boot/dts/at91sam9263.dtsi | 5 +
> arch/arm/boot/dts/at91sam9g45.dtsi | 5 +
> arch/arm/boot/dts/at91sam9n12.dtsi | 5 +
> arch/arm/boot/dts/at91sam9x5.dtsi | 5 +
> arch/arm/boot/dts/kizbox.dts | 6 +
> arch/arm/boot/dts/sama5d3.dtsi | 5 +
> drivers/watchdog/at91sam9_wdt.c | 309 ++++++++++++++------
> 9 files changed, 287 insertions(+), 88 deletions(-)
These 4 patches have been added to linux-watchdog-next.
Kind regards,
Wim.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists