linux-kernel - Re: 3.12-rc5 and overwritten partition table

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <trinity-828f1d13-83b5-4778-8df7-adc560730362-1383085945942@3capp-gmx-bs31>
Date:	Tue, 29 Oct 2013 23:32:26 +0100 (CET)
From:	"John Twideldum" <twideldums_throwaway@....at>
To:	"Jan Kara" <jack@...e.cz>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: 3.12-rc5 and overwritten partition table - by powertop?

>> >> The first ~170kb of /dev/sda got blown away with what seems to be a logging output
>> >> by Powertop, when I was playing with the tuneables.
>> >
>> >So did you log the output to some file? I'm just trying to understand how
>> >it could get onto your disk in the first place...
>>
>> Attached a dump of the first 1Mb of the disk, HTH.
>> It looks like a powertop log?
>> (I have powertop 2.4)
>
>Yes, likely. But it is strange the corruption doesn't even end at any
>sensible boundary (data ends at offset 0x27b53). Shrug...

My recollection what I did is this:

I was looking into powertop and observing how -rc5 works now with Haswell.
I saw the tuneable parameters and quite a few were "bad", so I set them to "good".
Power usage dropped about one third - yay!
However, changing "SATA link power" threw up complaints:

Oct 29 09:09:21 localhost kernel: [ 3697.423868] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0xc0000 action 0x6 frozen
Oct 29 09:09:21 localhost kernel: [ 3697.423873] ata1.00: irq_stat 0x08000000, interface fatal error
Oct 29 09:09:21 localhost kernel: [ 3697.423877] ata1: SError: { CommWake 10B8B }
Oct 29 09:09:21 localhost kernel: [ 3697.423880] ata1.00: failed command: WRITE FPDMA QUEUED
Oct 29 09:09:21 localhost kernel: [ 3697.423886] ata1.00: cmd 61/38:00:01:9e:a4/01:00:00:00:00/40 tag 0 ncq 159744 out
Oct 29 09:09:21 localhost kernel: [ 3697.423886]          res 50/01:00:01:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
Oct 29 09:09:21 localhost kernel: [ 3697.423888] ata1.00: status: { DRDY }
Oct 29 09:09:21 localhost kernel: [ 3697.423894] ata1: hard resetting link
Oct 29 09:09:22 localhost kernel: [ 3697.743196] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 29 09:09:22 localhost kernel: [ 3697.744707] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Oct 29 09:09:22 localhost kernel: [ 3697.744719] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 29 09:09:22 localhost kernel: [ 3697.744725] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 29 09:09:22 localhost kernel: [ 3697.744813] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
Oct 29 09:09:22 localhost kernel: [ 3697.745212] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
Oct 29 09:09:22 localhost kernel: [ 3697.746694] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Oct 29 09:09:22 localhost kernel: [ 3697.746705] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 29 09:09:22 localhost kernel: [ 3697.746711] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 29 09:09:22 localhost kernel: [ 3697.746779] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
Oct 29 09:09:22 localhost kernel: [ 3697.747286] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
Oct 29 09:09:22 localhost kernel: [ 3697.747432] ata1.00: configured for UDMA/133
Oct 29 09:09:22 localhost kernel: [ 3697.763181] ata1: EH complete

I did not know yet about what "frozen" means, so I did not investigate and
very soon powered down as I had to leave.
Next time I boot up.... I did not boot.
So data probable is just the size because as long as I had powertop running...

HTH,
J
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/