lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <bdb887025675d0c358c5107b537c7afd427c144f.1383173230.git.viresh.kumar@linaro.org>
Date:	Thu, 31 Oct 2013 04:22:12 +0530
From:	Viresh Kumar <viresh.kumar@...aro.org>
To:	rjw@...k.pl
Cc:	linaro-kernel@...ts.linaro.org, patches@...aro.org,
	cpufreq@...r.kernel.org, linux-pm@...r.kernel.org,
	linux-kernel@...r.kernel.org, viresh.kumar@...aro.org
Subject: [PATCH V2 Resend 14/16] cpufreq: tegra: remove target_cpu_speed[] array

Tegra's cpufreq driver was maintaining requested target frequencies in an array:
target_cpu_speed. And then finally setting the highest requested freq in the
core. This was probably done because both cores share clock line and logically
we want to set both cores to the max frequency requested..

But this wasn't required to be done in individual CPUFreq drivers, its already
taken care of by CPUFreq governors. They evaluate load for all CPUs and finally
call target only for the frequency corresponding to max load.

So, get rid of this stuff from Tegra's cpufreq driver.

Acked-by: Stephen Warren <swarren@...dia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
 drivers/cpufreq/tegra-cpufreq.c | 36 ++++++------------------------------
 1 file changed, 6 insertions(+), 30 deletions(-)

diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c
index f42df7e..7d36b54 100644
--- a/drivers/cpufreq/tegra-cpufreq.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -47,7 +47,6 @@ static struct clk *pll_x_clk;
 static struct clk *pll_p_clk;
 static struct clk *emc_clk;
 
-static unsigned long target_cpu_speed[NUM_CPUS];
 static DEFINE_MUTEX(tegra_cpu_lock);
 static bool is_suspended;
 
@@ -103,9 +102,6 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
 {
 	int ret = 0;
 
-	if (tegra_getspeed(0) == rate)
-		return ret;
-
 	/*
 	 * Vote on memory bus frequency based on cpu frequency
 	 * This sets the minimum frequency, display or avp may request higher
@@ -125,35 +121,16 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
 	return ret;
 }
 
-static unsigned long tegra_cpu_highest_speed(void)
-{
-	unsigned long rate = 0;
-	int i;
-
-	for_each_online_cpu(i)
-		rate = max(rate, target_cpu_speed[i]);
-	return rate;
-}
-
 static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
 {
-	unsigned int freq;
-	int ret = 0;
+	int ret = -EBUSY;
 
 	mutex_lock(&tegra_cpu_lock);
 
-	if (is_suspended) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	freq = freq_table[index].frequency;
-
-	target_cpu_speed[policy->cpu] = freq;
+	if (!is_suspended)
+		ret = tegra_update_cpu_speed(policy,
+				freq_table[index].frequency);
 
-	ret = tegra_update_cpu_speed(policy, tegra_cpu_highest_speed());
-
-out:
 	mutex_unlock(&tegra_cpu_lock);
 	return ret;
 }
@@ -167,7 +144,8 @@ static int tegra_pm_notify(struct notifier_block *nb, unsigned long event,
 		is_suspended = true;
 		pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n",
 			freq_table[0].frequency);
-		tegra_update_cpu_speed(policy, freq_table[0].frequency);
+		if (tegra_getspeed(0) != freq_table[0].frequency)
+			tegra_update_cpu_speed(policy, freq_table[0].frequency);
 		cpufreq_cpu_put(policy);
 	} else if (event == PM_POST_SUSPEND) {
 		is_suspended = false;
@@ -191,8 +169,6 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
 	clk_prepare_enable(emc_clk);
 	clk_prepare_enable(cpu_clk);
 
-	target_cpu_speed[policy->cpu] = tegra_getspeed(policy->cpu);
-
 	/* FIXME: what's the actual transition time? */
 	ret = cpufreq_generic_init(policy, freq_table, 300 * 1000);
 	if (ret) {
-- 
1.7.12.rc2.18.g61b472e

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ