| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACna6ryFtmZHAhmCPEsoxZc5h4mLuM4ajnKGsp=q0jag2f_SYw@mail.gmail.com>
Date: Thu, 31 Oct 2013 17:22:48 +0100
From: Rafał Miłecki <zajec5@...il.com>
To: Anssi Hannula <anssi.hannula@....fi>
Cc: Takashi Iwai <tiwai@...e.de>, alsa-devel@...a-project.org,
Peter Frühberger <fritsch@...c.org>,
Olivier Langlois <olivier@...llion01.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/4] ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support
2013/10/30 Anssi Hannula <anssi.hannula@....fi>:
> BTW, there is a newer version (which was actually applied) of this patchset
> in alsa-devel@, seems you were missing from CC on that one.
I didn't try that updated version yet, but I'm afraid I discovered
some problem. I've switched from my Denon 1912 to the older Onkyo
TX-SR605 and there is problem with multichannel playback. I've tried:
> speaker-test -D hdmi:CARD=Generic,DEV=0 -c6 -r192000 -F S16_LE
speaker-test 1.0.25
Playback device is hdmi:CARD=Generic,DEV=0
Stream parameters are 192000Hz, S16_LE, 6 channels
Using 16 octaves of pink noise
Rate set to 192000Hz (requested 192000Hz)
Buffer size range from 64 to 87360
Period size range from 32 to 43680
Using max buffer size 87360
Periods = 4
was set period_size = 17472
was set buffer_size = 87360
0 - Front Left
4 - Center
1 - Front Right
3 - Rear Right
2 - Rear Left
5 - LFE
Time per period = 17.027360
But I can hear sound for rear right and rear left only :(
Is there anything more I can provide to help resolve this? Do you have
any idea how we can resolve this?
zajec@...ux-samsung700g7a:/proc/asound/card1> cat eld#0.0
monitor_present 1
eld_valid 1
monitor_name
connection_type HDMI
eld_version [0x2] CEA-861D or below
edid_version [0x0] no CEA EDID Timing Extension block present
manufacture_id 0x0
product_id 0x0
port_id 0x0
support_hdcp 0
support_ai 0
audio_sync_delay 0
speakers [0x4f] FL/FR LFE FC RL/RR RLC/RRC
sad_count 6
sad0_coding_type [0x1] LPCM
sad0_channels 2
sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000
sad0_bits [0xe0000] 16 20 24
sad1_coding_type [0x2] AC-3
sad1_channels 8
sad1_rates [0xe0] 32000 44100 48000
sad1_max_bitrate 640000
sad2_coding_type [0x7] DTS
sad2_channels 8
sad2_rates [0xc0] 44100 48000
sad2_max_bitrate 1536000
sad3_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus)
sad3_channels 8
sad3_rates [0xc0] 44100 48000
sad4_coding_type [0xb] DTS-HD
sad4_channels 8
sad4_rates [0x1ec0] 44100 48000 88200 96000 176400 192000
sad5_coding_type [0xc] MLP (Dolby TrueHD)
sad5_channels 8
sad5_rates [0x6c0] 44100 48000 88200 96000
zajec@...ux-samsung700g7a:/proc/asound/card1> ls
codec#0 eld#0.0 id pcm3p
zajec@...ux-samsung700g7a:/proc/asound/card1> cat codec#0
Codec: ATI R6xx HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x70]: 32000 44100 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3
Power: setting=D0, actual=D0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Converter: stream=0, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Connection: 1
0x02
zajec@...ux-samsung700g7a:/proc/asound/card1> cat eld#0.0
monitor_present 1
eld_valid 1
monitor_name
connection_type HDMI
eld_version [0x2] CEA-861D or below
edid_version [0x0] no CEA EDID Timing Extension block present
manufacture_id 0x0
product_id 0x0
port_id 0x0
support_hdcp 0
support_ai 0
audio_sync_delay 0
speakers [0x4f] FL/FR LFE FC RL/RR RLC/RRC
sad_count 6
sad0_coding_type [0x1] LPCM
sad0_channels 2
sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000
sad0_bits [0xe0000] 16 20 24
sad1_coding_type [0x2] AC-3
sad1_channels 8
sad1_rates [0xe0] 32000 44100 48000
sad1_max_bitrate 640000
sad2_coding_type [0x7] DTS
sad2_channels 8
sad2_rates [0xc0] 44100 48000
sad2_max_bitrate 1536000
sad3_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus)
sad3_channels 8
sad3_rates [0xc0] 44100 48000
sad4_coding_type [0xb] DTS-HD
sad4_channels 8
sad4_rates [0x1ec0] 44100 48000 88200 96000 176400 192000
sad5_coding_type [0xc] MLP (Dolby TrueHD)
sad5_channels 8
sad5_rates [0x6c0] 44100 48000 88200 96000
>> Now the main question... do you have any experience on using DTS-HD MA
>> (or TrueHD) with mplayer? :|
>
>
> Nope (well, any that I still remember). Support is there, though, so I guess
> it should work.
After some testing I found out that xbmc works very nice :)
--
Rafał
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists