| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1383753405-23631-2-git-send-email-gdjakov@mm-sol.com>
Date: Wed, 6 Nov 2013 17:56:44 +0200
From: Georgi Djakov <gdjakov@...sol.com>
To: linux-mmc@...r.kernel.org, cjb@...top.org,
devicetree@...r.kernel.org, grant.likely@...aro.org,
rob.herring@...xeda.com, pawel.moll@....com, mark.rutland@....com,
swarren@...dotorg.org, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, rob@...dley.net, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: linux-arm-msm@...r.kernel.org, subhashj@...eaurora.org,
Georgi Djakov <gdjakov@...sol.com>
Subject: [PATCH v7 1/2] mmc: sdhci-msm: Initial SDHCI MSM driver documentation
This patch adds documentation for Qualcomm SDHCI MSM driver.
It contains the differences between the core properties in mmc.txt
and the properties used by the sdhci-msm driver.
Signed-off-by: Georgi Djakov <gdjakov@...sol.com>
---
.../devicetree/bindings/mmc/sdhci-msm.txt | 92 ++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
new file mode 100644
index 0000000..8f1a52d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -0,0 +1,92 @@
+* Qualcomm SDHCI controller (sdhci-msm)
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-msm driver.
+
+Required properties:
+- compatible: should contain "qcom,sdhci-msm"
+- reg: should contain SDHC, SD Core register map
+- reg-names: indicates various resources passed to driver (via reg proptery) by name
+ "reg-names" examples are "hc_mem" and "core_mem"
+- interrupts: should contain SDHC interrupts
+- interrupt-names: indicates interrupts passed to driver (via interrupts property) by name
+ "interrupt-names" examples are "hc_irq" and "pwr_irq"
+- vdd-supply: phandle to the regulator for the vdd (flash core voltage) supply.
+- vddio-supply: phandle to the regulator for the vdd-io (i/o voltage) supply.
+- pinctrl-names: Should contain only one value - "default".
+- pinctrl-0: Should specify pin control groups used for this controller.
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names
+- clock-names: Should contain the following:
+ "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
+ "core" - SDC MMC clock (MCLK) (required)
+ "bus" - SDCC bus voter clock (optional)
+
+Optional properties:
+- qcom,bus-speed-mode: specifies the supported bus speed modes by host
+ The supported bus speed modes are:
+ "HS200_1p8v" - indicates that host can support HS200 at 1.8v
+ "HS200_1p2v" - indicates that host can support HS200 at 1.2v
+ "DDR_1p8v" - indicates that host can support DDR mode at 1.8v
+ "DDR_1p2v" - indicates that host can support DDR mode at 1.2v
+
+- qcom,{vdd,vdd-io}-lpm-sup - specifies whether the supply can be kept in low power mode.
+- qcom,{vdd,vdd-io}-voltage-level - specifies voltage levels for the supply.
+ Should be specified in pairs (min, max), units uV.
+- qcom,{vdd,vdd-io}-current-level - specifies load levels for the supply in lpm
+ or high power mode (hpm). Should be specified in pairs (lpm, hpm), units uA.
+
+Example:
+
+ aliases {
+ sdhc1 = &sdhc_1;
+ sdhc2 = &sdhc_2;
+ };
+
+ sdhc_1: qcom,sdhc@...24900 {
+ compatible = "qcom,sdhci-msm";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ bus-width = <8>;
+ non-removable;
+
+ vdd-supply = <&pm8941_l20>;
+ qcom,vdd-io-lpm-sup;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8941_s3>;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+
+ pinctrl-names = "default"
+ pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "iface", "core";
+ };
+
+ sdhc_2: sdhci@...a4900 {
+ compatible = "qcom,sdhci-msm";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ bus-width = <4>;
+
+ vdd-supply = <&pm8941_l21>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8941_l13>;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists